Counting matching models…
Small cases for Luckfox Pico Pro/Max (RV1106) and Pico Plus/Mini (RV1103) You can add a piece of clear filament in the hole near the usb-c port to guide the indicator light through (for Pro/Plus/Max). There is also a version without the…
The length on the label is to scale, otherwise it is cut in the middle. The shaft diameter and head are not to scale as this look awkward on the small labels. I sticked with the text style of the original labels by the user @Pred_457770 .
Collection of screws (ISO 10642 / DIN 7991) including : M3x 5, 6, 8, 10, 12, 16, 20, 22, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
As previously stated, it is just a little case for the SSH1106 OLED. Uses 4 M3 nuts and bolts to hold it together and provides quite a bit of protection. (they might be m2 thinking about it…) just print it with the face down if you want…
Collection of screws (ISO 10642 / DIN 7991) including : M5x 6, 8, 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight,…
Collection of screws (ISO 10642 / DIN 7991) including : M4x 6, 8, 10, 12, 16, 20, 22, 25, 30, 35, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
This is a remix of an original terminal for a Wemos D1 Mini. Since I am unfortunately a total novice with regard to soldering, I was looking for an equally nice looking terminal, without the need to solder. I increased the depth of the…
EDIT/UPDATE: NEW VARIANT! Print the NEW V2 edition! its 2 diffrent part and the end need to assembly. (See on the new pictures) Now is not easy to brake the top hook! You can print now the V2 from PETG/ABS/ASA/HT-PLA Mounting for folding…
Sanding Block – 106 x 70 mm Universal sanding block with a clamping screw for comfortable and efficient hand sanding. The working area of 106 x 70 mm is perfect for sanding both flat and shaped surfaces. The ergonomic design and easy…
Large (106mm tall) Modular letter and number system with spacers (20mm, 30mm and 40mm) and button connectors, for use with routers. 8mm thick, and use with a 12mm bush on your router. The letters and numbers clip together with the buttons…
Replacement knob for Makita DMR106. Not sure but might fit to other similar radio models as well.
Collection of screws (ISO 10642 / DIN 7991) including : M6x 6, 8, 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is…
Collection of screws (ISO 10642 / DIN 7991) including : M8x 8, 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If…
Last year I modified my laptop to support an external graphics card using the EXP GDC Beast (v8.3 in my case) adapter, allowing me to play relatively modern games when away from my main rig. Rather than have the card exposed, I designed…
This is a repair Kit for Braun “Universalschüssel” fitting the machines K850 K1000 K3000 3210. To remove the broken part you can drill a small hole in its center and punch it out with a nail. To press in the new part, i added two parts…
Slim, compact enclosure designed for a 1.3" SH1106 128x64 I2C OLED display module. The case dimensions are based on a specific display variant, though slight size differences between manufacturers are common. Clearances are kept tight to…
I recently helped to build a PC. Friends graphics card of choice was affordable Zotac's GTX 1060 3GB single fan model. Due to construction/budgetary limits of graphics card it was loud while in high performance mode. We decided to add…
I have designed a drop-in replacement of the Arrma outcast drive shaft (ARA311065) I think it is a stronger design as it is not hollow and is cheap to make if you have a 3D printer. I have tested it on multiple materials and layer…
Tool holders designed to attach to the outside of the side pockets of old town sportsman kayaks, made for the 106 PDL but should fit most of the Old Town Sportsman line. Heavily influenced by Bradget Designs on ETSY but I wanted some that…
We created this bracket for the ZOTAC ZBOX Mini PC to use in our interactive table made for Sekisui Plastics. The bracket allows any of the previous and current ZBOX Mini PC's to be mounted to any surface. The VESA mount holes on the…
Replica of the original part BM51-A31066-A Is not 100 percent equal, but the holds much better Please only print with ABS or PETG or materials that will not bend at higher temperatures. I printed with ABS, Layer 0.12, speed 80mm / s…
multi use inlays for milwaukee slim packout: drill holder 1/4" bit holder low + high SDS-drill holder jigsaw blades
Description: A replacement for WORX WX106 toolbox middle plate More compact for more accessary bits 1 replaceable volume for custom module module_A 11 slots/group x 5groups for 3mm x 45mm bits (group design for compact and ez to get) 13…
This model is compatible with the lego system.
This is a fictional narrow-gauge diesel locomotive LSM 03 in H0e scale. I designed and modeled it from scratch in SketchUp. Done to be printed in lcd resin printers. Just add support. Designed to fit the Kato 11-105, 11-106 or 11-107…
I present to you a large-scale car model - a souvenir that will be a great addition to your collection or a gift for an automobile enthusiast. This is a beautifully crafted model. Immerse yourself in the world of automotive history
This model is compatible with the lego system.
Collection of screws (ISO 10642 / DIN 7991) including : M10x 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher…
Collection of screws (ISO 10642 / DIN 7991) including : M14x 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher…
Dado stack insert plate for an 8" dado stack on a kobalt TS10601 jobsite table saw. I believe the TS10602 is the same. You must modify the riving knife in order to use this plate and a dado stack on this particular saw by disassembling…
Questo adattatore che non è fornito come si vede nella foto perché inserito nella leva vi da la possibilità di recuperare tutto. per Peugeot 206 ma modificabile diametro interno per Peugeot 106 o Citroen
With this adapter you are able to mount a QuicRun 1060 switch to a Tamiya chassis. You need 4 2x6mm tapping screws and 2 washer. If you got a light unit with your Tamiya kit there are some leftover screws.
Collection of screws (ISO 10642 / DIN 7991) including : M16x 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material.…
Just a shroud for the Asus Rog Strix GTX 1060
Oled instalation has 2 steps: put in display to oled mount part put on the cover (cover has snaps on two sides) I mounted this mount with two sided tape 3M.
Recently, I installed some graphics AI on my computer, and I like the side blowing cooling method, so I made a fan adapter that looks good to cool my graphics card This model is applicable to the fan model 752512Turbofan
Sept 2023 Update: Improved Design Now Available Here: https://www.printables.com/model/586801-improved-replacement-drip-tray-for-the-grp1060b-4- Somehow lost the drip tray/catch pan for my 4-serving George Foreman Grill (GRP1060B).…
Collection of screws (ISO 10642 / DIN 7991) including : M12x 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher…
Collection of screws (ISO 10642 / DIN 7991) including : M20x 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material.…
Introducing the custom-designed GPU stand specifically crafted for the NVIDIA GeForce GTX 1060. This sleek and sturdy stand is the perfect solution for securely mounting your GPU, providing both stability and efficient cooling for optimal…
A solution for attaching the plastic tunnel when installing a short shifter
Grinder guard for Worx106 mini grinder To install, you need to first put the grinder disc and shaft assembly into the guard, then insert the whole thing into the grinder.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [CORRECTION: Mar 17, 2024] The wrong model was…
self created model of the original Volkswagen-Tool T10613. It is used for postitioning the clutch in the gearbox with the code KUT.
***PLEASE MAKE SURE YOU UNDERSTAND BASIC ELECTRICAL SAFETY BEFORE ATTEMPTING THIS BUILD, OR CONSULT A PROFESSIONAL*** I made an enclosure to house the amplifier board and power supply. It has 10 outputs on the back for the 7.3 channels on…
A remix for sorting boxes with size of 204 x 106mm and 206 x 106mm. One is just 2mm wider than the other, i had three boxes that fit my first 204mm design, but one that didn't. If you're not sure, print the bigger one. Trays for other…
If you have the Rigid (Home Depot) 10" Miter saw with the laser line (model MS1065LZA) the insert plate (the orange plastic part) will eventually crack. I couldn't find it on the Rigid tools website but figured, it would work just fine as…
Some folks who market a bunch of expensive products believe that vibrating your guitar a bunch will improve its “tone”, whatever that is. Here's a mount that you can attach to an EWA106 bluetooth speaker to put that to the test and maybe…
So this part broke on my Peugeot 106 so i can't open and close the vent
This is simply a rounded or domed center cap with the VW logo. Measure your existing center cap and scale accordingly, or add as a logo to your full center cap 3D design.
This model is compatible with the lego system.
The California Air Tools 1P1060S compressor is well reviewed as being quiet compared to the competition however due to vibration, if you're using this inside, it's still very loud. I found if I held the compressor in the air while it was…
This is a replacement designed by me in a simple way for the NESCAFÉ® Dolce Gusto® KP2106 to cover the water container. The original lid was missing at the delivery. Printed in Prusament PETG Lipstick Red, 0.2 mm layer height.
even without screws, it holds on pretty well :) you can add a piece of acrylic to the front to give it a more professional look
This pad does not require brass spacers, I recommend printing from PETG with 50% filling
These are 1" seat risers for the Old Town Sportsman 106 MK or if your seat has a 22mm frame they should work, I'm not sure what size screws I used but it should not be hard to match some SS screws to it. Print Settings Printer Brand:…
This is a 106mm diameter, 900mm f.l. refractor, based on the following components: Objective lens: https://www.aliexpress.com/item/1005001797311188.html?spm=a2g0o.order_list.0.0.7c581802rSG52C Focuser:…
This is DIN rail case for EmonTX v3 with EmonESP and OLED display (SH1106). Custom EmonESP board Eagle/Gerber files are at https://github.com/stanoba/EmonESP-module My EmonESP fork with OLED display implementation is here…
I overtightened the original one and it broke. This is for a Sundvik baby bed but fits others that use the sam part as well
I designed this to fix an issue i have with my Audeze earpads being too large for the driver of my m1060 headphones. So i enlarged the front face, and added a retaining lip around the cup to prevent them from sliding off over time.…
Kawasaki CAP DUMMY (11065-0921). I lost one so I made a copy of the other one as buying will be expensive on my country (because shipping). Prints in ~40 minutes, 0.4 nozzle, 0.12 resolution, 35 mm/s with supports on an Ender 3 V2.…
This model is compatible with the lego system.
This is the wire retainer for Diatone Roma F5 FPV Quadcopter. This holds the 12Ga battery leads to the aluminum standoff. This may fit other Diatone FPV Quads. Leave a commit if anyone needs the 14Ga version.…
Tapa para frasco de vidrio ¼ de vuelta Diametro 106 mm.
I somehow how misplaced the drip/grease tray from my 4 serving Foreman grill. Without the drip tray, the Grill is unusable. By design, when frying hamburger or other meat on the grill, hot grease flows safely off the bottom edge of the…
The deck goes in my backpack daily. Most everything else that travels in the backpack gets lint and dust in the cracks and openings. I didn't want that to happen to my deck so i made these covers. **** WARNING: Not removing/opening the…
module that allows for the SH1106 OLED display * However I have yet to find & or figure out how to get the SH1106 Adafruit Library to load with the stats.py script? Would love to get some help with this…
I found this useful model which helps to hold the WORX WX240/242 on the SKADIS board. That's very nice because I have one myself. But I also have a WX106 electric die grinder which is approximately 20mm longer than the former. So I built…
None of my adaptors worked for this saw to my shopvac (Rigid), so I made one. I printed this with ABS and it is a tight fit, but that is a good thing. So far it is strong and working well. You could also maybe use TPU, but it might slip…
[CULTS3D https://cults3d.com/:4176716 — full pack available at: https://cults3d.com/@Alejandro_MS ] ISO10642 M3 hex bolt — sample file, optimized for FDM 3D printing. This is a FREE SAMPLE of the complete pack which includes 65 STL files…
This is an enclosure I've built for my electric boat. It houses the electronics to read out the state of charge, cell voltage and temperature of my battery packs. A STM32 uses ethernet to interface with a battery management system via…
I had an unfortunate accident with my Morakniv and had the stock knife sheath slip off and the knife stabbed me. I came up with this idea to make a cover that would not slip off when you are putting it away. Fits both 120 and 122 style…
SW6106 Board is Glued with B7000 (you need to file 2-3mm off the sides) Single Click Turn ON Double Click Turn OFF HOLD 5s Turn ON Long time You need 4 Screws M2 SW6106 Board Brass inserts M2 Print Settings Printer Brand: VoronDesign…
Made this for my friend's phone as an introduction to 3D printing. We did not find any models for his phone, so I thought let's publish it here. If you found this useful, me know in the comments. :) Prints fine without supports. This…
This is an enclosure for the 1065 320 PBI based RAM revision 1 expander for the Atari 600XL and 800XL. More information can be found on Atari Age from the following link:…
I made a few modifications to the original design to better suit my needs. I removed the rim around the shroud from the original model since it kept hitting other components on my motherboard when trying to install it but I didn't have…
Summary Wen CT1065-042 track saw part. See photos of broken part and the 3D printed part. Print Settings Printer brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Resolution: 0.20mm Infill: 60%
My M1060 broke last year (the wood split). Since going back to the office I miss my Sundara at home, so I decided to repair/mod my old trusty M1060 to a close back design so I can use it at the office. There are three parts to the print.…
The Crankcase Ventilation connector on my Peugeot 106 (TU3JP engine) broke off, and I made a new one. After printing, you can just use self tappers to attach the part where the original connector would be. You should use at least PETG to…
This is an enclosure for the 1065 320 PBI based RAM revision 1 expander for the Atari 600XL and 800XL. More information can be found on Atari Age from the following link:…
Ich Habe Hier einen simplen Sicherungs Clip hergestellt für die Steckverschraubung von Festo 186106 QS-G1/8-4-I I have made a simple locking clip for the plug-in fitting from Festo 186106 QS-G1/8-4-I…
This is a copy of the kawasaki ninja 300 swingarm cap 11065-0748-18T. Use sandpaper to give it a nice smooth finish and paint as you like. I used fs black from rsbikepaint. Prints in 2 and a half hours, 0.4 nozzle, 0.12 resolution, 50…
This is a remix of MiniWare MPD-P906/MPD-M01 Rugged Case adapter for MiniWare MDP-L1060 Electric Load that is alone about 5mm thicker than MiniWare MPD-P906/MPD-M01 modules. I also made top and bottom +2mm to original so that they provide…
The holder on my Andonstar AD106S was not enough for me, so i printed this third arm to give me more room. It looks like it might fit other Andonstar models, but don't forget check before printing. I printed these in PLA+ with a 50%…
Simple holder for MT106 Mr. Hobby Nippers, protects the blade tip. Print settings: no support, 10% infill, 0.2mm
Coin designed for Pokemon Go community day. Coin reflects selected Pokemon for community day July 20th 2025. Front shows Quaxly and back shows the Quaxly evolution. Glue coin halves together after printing. Paint if desired. Additional…
An organizer for meds in a Pelican Micro 1060. It's designed to hold 3 - 5mL drug vials 2 to 3 - Injection Needles 2 - Narcan Atomizers 7 - Slots for various med packets
Držáky na ESC regulátor pro stejnosměrné motory. Označení regulátorů je : "1060". Osobně používám držák tak, že ho mám přilepený vteřinovým lepidlem na konstrukci modelu. Vypínač a samotný regulátor mam v držáku zajištěný tavnou pistolkou.
This is to replace the track that runs between the two center crispers, works with some Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef models of fridges. White - 13.5" long
I like the look of HamRadioDudes G-106 side rails over the ones that I had originally designed, but felt they needed some tweaks. These rails are harder to print than mine, I recommend using tree supports and print them in the orientation…
lo he imprimido en PETG y 100% de infill he usado un trozo de camara de bicicleta alrededor del altavoz para que no se deslice y un adhesivo de goma para la superficie de apoyo con el manillar/cuadro este es el altavoz:…
Printed in PETG at .3mm nozzle height. Supports are needed. not a perfect model, but fan clearance is large so it's good enough. you can also bend the extra bit of metal back for a completely flat side.
This is a recreation of the bottom bed roller (not side rail roller) of Apache Campers made 1973 - 1986. Made it based on dimensions taken from a “new” bed roller. For best results I would print this out of a durable material, PETG,…
I do not recomend printing this i am uploading it simply because having gone to the trouble of making this it seemed silly to have any one else go to the same trouble Link to Part…
Description This is a remix of two models - both of which have been modified. Model one is the 3D printable case for the OpenMV Cam RT1062 V4; model two is the Bendy Phone Tripod and Stabilizer. The result is a cam case with an embedded,…
Petit plateau carré de 106 × 106 mm avec rebords fins, conçu pour organiser ou stocker de petits objets sur un bureau, un établi ou dans un tiroir. Idéal pour les vis, composants électroniques, clés, pièces détachées ou tout autre petit…
I recommend printing from Pla, if you dont want wait for the shipment, it fits perfectly 1 to 1😉
