Counting matching models…
TL;DR Free standing Heavy Spool Holder for friction less printing with big spools up to 10 kg, works also great with 1kg spools, you need 4 bearings to build one, but no screws or glue, printed without support. Collection tools, 3D…
Hi ! I love big spool ! So this is a spool holder for BIG spool ! Enjoy needs : 8mm rods 2 8mm nuts 2 608zz
We made bearing guides for [REXON 10-inch band saw BS-10K2] and [DELTA 28-195 10″ BANDSAW]. There are two types of files: one that can be used as-is after printing and installing bearings, and one that can be used with 8mm stainless steel…
Under desk mount for FiiO headphone amplifier (E10K, E10K-TC, etc). A tab allows the amp to be retained in place, but still easily removed when desired. All of the amp's ports and controls remain accessible when the device is mounted.
The HUAWEI SUN2000-10KTL-M1 is cooled only passive and therefore the temperature is very high. This was my solution to it. You can add a 140mm fan and turn it on time based or with some intelligent electronics. I recommend to active cool…
Print Details: Overture PLA, Black .4 nozzle, .2 layer height 15% infill no supports I used 4 M3 16mm long screws to mount to the underside of my desk. DAC friction fits in the mount, and abuts the stop in the rear of the mount.
Printed upside down with supports with an Ender 3 on super quality settings. Replacement key for low profile ctrl. Category: 3D Printing
its happening! flip it to print! (10k goes on the Buildplate) V2 edit: minor corrections! Category: Coins & Badges
Use this plastic coin to unlock shopping carts. This is made to work in Sweden and is formatted after the Swedish 10 kronors mynt.
This is a simple model designed to prevent dumbbell weights from moving or rolling when placed on a surface. The dumbbells I use are the 10kg set sold by York Fitness in the UK. The holder works for any configuration of the weights. The…
This is a custom designed spool holder for the IC3D 10KG Filament Spools. I has issues using other spool holders due to the size, weight, narrow spindle opening, and nubs left on the spool (possibly from injection molding it). This is…
A knob e.g. for the B10K analog poti (e.g. often used in Arduino projects). → Compatible with split shaft potentiometers with a 1 mm slot that locks the knob in place. I hope you like the model! → Makes and Comments are very much…
prints supportles in 10min USE CURA 75DEG MAX have fun PLEASE ### SEE my other modells here https://www.printables.com/@Magig_I3Prusa/models
very nice to print nosupport Have fun +++ PLEASE see the other houses in my account here
I built for the community a 5kg or 10kg spool holder. This should be a fairly easy print and is designed with easy to modify files and easy to replace inserts to make printing easier and maintenance easier. If you redesign this model…
this is a belt clip battery holster for the Anker PowerCore slim 10,000mAh battery good for extended Vr play or charging up https://www.amazon.com/dp/B07QXV6N1B/ref=cm_sw_r_cp_api_glt_i_E8Z6DH22DHG2KWP957X8?_encoding=UTF8&psc=1 Print…
This was designed for a IC3D 10kg roll of PETG. After my first assembled trial run, I realized I needed a spacer of sorts to hold the roller frames a set distance apart. Alternatively, you could probably just use rubbery feet. Print in…
weight plates with different weights, designed to be able to customize the weight of a squat or bench press rack model
Its the blender logo in 3d. When you open it with blender there are also some lights ready for render cool images. The cover photo is a renderd image with the resulution of 10k! The image size is 1920x1080
Remixed for a a ½ inch (21.5mm) steel pipe you can get at home depot. Remixed in Tinkercad so its not perfect. Steel pole has a nut on the end to stop it rotating. Snaps in place but can also have a t-nut. Had it hold 10kg spool no…
For mounting a Fiio E10K under (or on top of?) a desk. Differences from the original: Increased height to also accomodate for the rubber feet Bigger knob cutout for convenience (style 2) Slots for coutersank screws A bit smaller…
Dvoubarevný žeton do košíku o velikost 10Kč. Žeton se skláda ze dvou částí - žetonu s výřezem loga a objektu ve tvaru loga. Žeton s výřezem na logo je navržen na první vrstvě, který by zároveň měla být zpomalena na ⅓ rychlost ( cca 8mm/s…
Hook / Bracket to support MASSIVE 10Kg spool of filament! (or multiple spools) Sized for 1" PVC pipe. Uses 2x threaded inserts along with a backer plate to mount hook / bracket to frame of printer rack. Open-ended hook for easy spook…
Spool holder for 2.5/10kg spools, requires a 8mm or 3/8ths inch steel rod at about 15 inches in length.
A mini 10 keys keyboard. Parts : 10 key switch. ( Cherry MX or compatible , gateron... ) 1 Teensy 2 10 keycaps ( I printed them ,design will be uploaded soon ) 4 M4 threaded Inserts 4 M4x12 screw Software : You can use…
Žeton do nákupního vozíku - 10Kč. Odpovídá skutečné minci. Vyzkoušeno v Lidlu, Penny, Trefa/Terno, Albert. Můžete zkusit i: 20Kč žeton 10Kč vytažitelný žeton 20Kč vytažitelný žeton
prints in 15min at 0,2 use bridgemode and 75deg max if you cand get 10mm apart on your filament HAVE FUN +++ Please see the otheres here on my printables ##################### https://www.printables.com/@Magig_I3Prusa/models…
This Stand was designed (with Alibre 3D Professional) originally to hold a 10 kG (22 lb) roll of heat seal plastic bag material. It's a big, heavy roll so I knew the Stand would have to be robust. The triangular end supports and all the…
I like to leave a surprise coin for cart thieves. I print them out of leftover filament and leave them in the cart as a joke.
Desk mount with 4mm screw holes for the FiiO E10K Olympus 2. I used some 3.5mm wood screws Print with a brim if it doesn't stick to the bed.
Stabbing time Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Supports: Yes Notes: Frame requires supports. Best to print the frame in ABS so the frame lock doesn't lose its springiness. For the blade, print one…
Update 5MAR2021: Added 30mm diameter spool holder. Print 30MM Core 1, 30MMCore 2, and 2 30mm DIA ends. Verified with zyltech 5kg spools. Here's a spool holder I designed for 10kg filament spools from push plastics. This spool holder…
10 Kc do nakupniho voziku (zasunout pootocit a vytahnout)
NOT MY MODEL, ORIGINAL MODEL MADE BY https://www.thingiverse.com/GromMaker. Original description: Bracket allowing you to secure your Fiio E10K to a desktop using two small screws. It slides in with a slight interference fit, but can be…
Description Need a simple, strong, and stylish way to carry your bottle hands-free? This custom-designed carabiner attachment ring is the perfect companion for your on-the-go lifestyle. Designed to fit snugly around most standard…
As in the title, replacement parts to be 3d printed for FE VFC SR25 SR25ECC M110 SASS M110K1 HPA GBBR conversions, gen1. For details see video:
We recommend using asa or nylon for strength. Assembly is by gluing with two-component epoxy adhesive.Fill with lead balls inside. Once completely filled, there should be about 10kg of ballast (22 lbs).
This replaces the BOBOVR Battery Dock and allows you to use an external power bank in its place while retaining the “hot swap” capabilities. I went with the Anker PowerCore 10K Pro. The magnet holes in this remix are reduced to exactly…
This is a replacement for an SGI O2 with the bigger metal base-plate/cage for MIPS 10K or 12K CPUs. If you're lucky to find a complete 10K/12K cage to upgrade your 5K O2, most of the time the plastic tray is missing or broken. This is a…
I really liked hellobritt's Under Desk Mount for the FiiO E10K, but I wanted it to be on the desk, so I created this simple remix in PrusaSlicer 2.8.0. Just load the .3mf file into the sIicer and get to printing (or change the parameters…
shopping cart tokens with logos
Analog plunger for your virtual pinball cabinet. No spring — just a rubber band for return force and a B10K linear slider potentiometer hooked up to Pinscape Pico. It works, it feels decent Almost entirely 3D printed in PLA, some parts…
Elevate your audio experience while decluttering your workspace with our 3D-printed under-desk mount for the FiiO E10K DAC. Designed for seamless integration with the DAC's original rubber standoffs, this mount ensures stability and easy…
Assembly Video Story Hello there! I couldn’t find the perfect spool holder for my massive 5 kg Sunlu ABS spool, so I designed my own: adjustable, portable, and lightweight This spool holder was made to use spare bearings from my Voron…
This fan case does not produce the high pitched noise of the 80mm 10k RPM fans. For Fans Delta PFR0812HE-02
I couldn't find a holder for this AstroAI multimeter, so I made one. I printed this with Prusa Silver PLA at a .2mm layer height and 20% infill.
A coin for shopping carts that take 5to 10Kč coins….Mince pro nákupní koše v hodnotě 5 až 10Kč…
Convert your Ender 3 into a monster 3d printer! With this setup, it can surpass 500mm/s and 10k acceleration 😱 Video proof: Boss Garage - Youtube video ✅ Extruder: BMG clone ✅ Hotend: Creality Spider V3 ✅ Probe: CR Touch ✅ Dual z-axis:…
Swedish 10kr cart token for dog lovers Svensk 10kr kundvagnspollett för hundälskare Print Settings Printer Brand: Zortrax Printer: Zortrax M200 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,2 Infill: 50% Notes: I printed…
I wanted to add some tracking functionality to my E-Scooter, and since I have an AirTag, that seemed like a good idea, so I looked for a design to help me get started. I took https://www.thingiverse.com/thing:4836701 as an inspiration and…
remix of that one with screw holes - now you can attach adhesive strips to the side instead if you like that better.
Stojak można wykonać bez dodawania podpór ( powstanie tylko delikatny zwis pod napisem 110km )
Action camera compatible mounts that attach to the barrel of a Nerf Rival Nemesis MXVII-10K. Use to mount camera, laser pointer, or other accessories. M5 mounting screws. You will probably need a ball-end allen wrench to tighten the 4x…
I had this printed at Detroit 3D Manufacturing via Craftcloud in black PETG at 60% infill (to give it some weight). I have the original E10K (micro-USB), but there is a newer E10K-TypeC (USB-C) which I have not tested, but I believe it is…
A compact 3D printable enclosure designed specifically for the popular DC 5–24V 4-channel PWM fan speed controller with a 10K NTC temperature sensor. The enclosure provides a clean and professional look while protecting the controller…
clipable batterpack/powerbank holder for tripod, currently for a ~26mm leg with a 22mm opening.... recommend it to print it in PETG
Ref 10kg spool, to make a custom spool holder.
I have designed the 10kg weight plate mold to be 350mm wide with a height of 48mm. The center hole is for standard bars (Approx 25mm diameter weight bar). NOTE This will not fit Olympic bars as they are wider. If you scale the center…
UGREEN UNO 1K MagSafe Power Bank and Samsung T5/T7 SSD Gridfinity Module This 3D printable Gridfinity module is engineered to store and organize your UGREEN UNO 1K MagSafe power bank and a Samsung T5 or T7 SSD . Featuring precisely sized…
I made this cart token so you can print it, build something with LEGO (or other compatible bricks) on it and bring it with your shopping cart in Sweden. Why not bring your favourite Minifig on a shopping trip? Easy to print, no real…
needed to make an 10 kg spoolholder so i took an proven spoolholder system and made it more my wishes. incl an sort of brake because an 10kg has quit an momentum….. added an extra holder for the 2020 I got the bearings from here:…
Printed on Push Plastics PLA 222/52. 30% infill, skirted. 0.2 res. Simple model for installation on a 1000lb capacity lazy susan. This spindle ‘bump’ centers and holds the spool in place while it unrolls on its side. Entire apparatus is…
Replacement base plate for the Vevor 10kg x 0.1gram scale! Even after calibration, the scale base plate does not properly distribute the weight on the scale. That is insulting for a 75$CAD scale! To check if you are affected, simply use a…
Printed with raised text to have the 10,000 show well enough while keeping the black body of the original chips. Recommend printing with a .25 nozzle, 15mm layers and ironing for best results Printed on MK3S+ with Revo 6 Hotend
Sled outer dimension fit standard Shapton sharpening base 216x70mm Sled inner dimension designed to fit 10k natural stone size 150x50x10mm https://www.amazon.com/dp/B07TJQNG1R?ref=ppx_yo2ov_dt_b_fed_asin_title
žeton do nákupního vozíku je malý a hezký vleze se všude klidně i do vaše nejmenší kapse
Klíčenka iniciativy nájemníku a nájemnic (INN). Slouží jako žeton do košíku. Verze 01 Pro oficiální tisk použijte MATNÉ filemanty.
The space in this insert retains a Mophie power bank inside a Plano 3400 Series Stowaway box available from various retailers . Together with a cable gland and a USB-C trigger module, this can be used to create a waterproof 12V or 3.3-20V…
Dies ist ein passender Medallienträger für die dreiteilige Hamburger 10K Laufserienmedallie aus 2026, um sich diese z.B. dekorativ aufzustellen. Dieser Halter ermöglicht es, die Medallienbänder an den Medallien zu lassen. Es gibt zwei…
Replacement Water-proof charging Plug Cover for a EV10k Pro Abe i printed out of TPU. to mount it i removed the bottom cover of the scooter, unplugged the charge port and loosened the nut that held the port. then i slid it over the charge…
Ersatz-Abstandshalter für historische Trainingsstationen / Gerätetürme, für die es keine Original-Ersatzteile mehr gibt. Dient als definierter Zwischenabstand am Gewichtsblock der Beinpresse, um die 10-kg-Gewichtsabstufungen sauber zu…
Sled outer dimension fit standard Shapton sharpening base 216x70mm Sled inner dimension designed to fit 10k natural stone size 150x50x10mm https://www.amazon.com/dp/B07TJQNG1R?ref=ppx_yo2ov_dt_b_fed_asin_title
I had this printed at Detroit 3D Manufacturing via Craftcloud in black PETG at 60% infill (to give it some weight). I have the original E10K (micro-USB), but there is a newer E10K-TypeC (USB-C) which I have not tested, but I believe it is…
clipable batterpack/powerbank holder for tripod, currently for a ~26mm leg with a 22mm opening.... recommend it to print it in PETG
Spool holder parts for 10kg (20pound) Filament. After few 3D model test, I decide to go head with something more useful and faster. You need to print two time the parts and after this you take MDF 5/8 inch to build the frame. The two…
AI Restore of a VERY old Actionfigurine of the 70's Have fun Clean 10k Mesh
A simple, easy to print token with honeycomb-style cutouts. Nothing too special, but works and the cutouts are big and should be strong enough to thread onto a keychain, for example. Modelled from scratch as a part of a VW learning…
Žeton do nákupního vozíku - 10Kč - vytažitelný po odemknutí vozíku. Odpovídá skutečné minci. Můžete zkusit i: 10Kč žeton 20Kč žeton 20Kč vytažitelný žeton
We like big rolls and we cannot lie… but they can be a challenge! The 10kg filament rolls that we use from IC3D are big, heavy, and can be a struggle to work reliably with consumer-level printers. They're also very difficult to dry back…
I have no idea what model of Ford Van (I think?) this came from. I CAD'd and print'd for a friend. I'll update this when I know what vehicle he has.
