32 models
Einlegeplatte für die beliebte Makita Oberfräse RT0700 und deren Nachbau Katsu 101750. Die Montage des Kantenfräsmoduls in die Einlegeplatte erfolgt komplett ohne Werkzeug von oben. Anschließend wird die Oberfräse von unten eingeschoben…
Update 30.01.2026: Improved V2 released for better fit and less filament consumption. Summary This is the one-size-fits-all repeater stand for all the full-size wall plugged AVM Fritz!Repeater and FRITZ!Smart Gateway. All you need is a…
Just a simple case with a snap-in lid. I also added the blend-file if you want to modify it for your use case.
I made a replacement part for the central locking of a w201 trunk. Orginal part number (A2017500092) I printed it using my X1 CC with PA6-CF (100% infill) laying flat on the long part. works perfect so far. you may have to scale it…
I Modified the project to be able to store a LD2410C instead of the temp sensor. Also i opened part of the top case for the light sensor, as the measurements were pretty low. There is plenity of space for the cables, so you should be able…
This is my first attemp for a sensor case, which reads temperature, humidity and lux. It uses a d1mini flashed with Tasmota and a DHT22 and BH1750 (GY-302) as sensors. The data is published via MQTT to my HomeAssistant instance. This is a…
1750 840 Freight Bogie - Dragon Railway Freight Bogie 1750 840 1/64 Scale Assembly Manual: Google Docs Check out the Dragon Railway ecosystem! Join our comunity : Discord If you are happy, Buymeacoffee!! Print settings: Cura 3MF file
1750 840 Freight Bogie - Dragon Railway Freight Bogie 1750 840 1/32 Scale Assembly Manual: Google docs Check out the Dragon Railway ecosystem! Join our Discord If you are happy, Buymeacoffee!!
MOD. ALFA ROMEO 1750 Gran Sport del 1930 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Inspiriert durch https://www.thingiverse.com/thing:4676653 , habe den Halter neu konstruiert. Arretiert wird er durch den Euro-Stecker. Beispiel: https://www.amazon.de/gp/product/B0013NAPKI/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1…
Surprisingly, I couldn't find a case that would work for me so I had to design one. My board is AZ Delivery but it probably should fit others if not you can play with parameters in Fusion 360. The sensor can be screwed with m3 bolt.
Original project: https://www.printables.com/es/model/189821-d1mini-sensor-case-dht22-bh1750 I Modified the project to be able to store a LD2410C instead of the temp sensor. Also i opened part of the top case for the light sensor, as the…
This model is compatible with the lego system.
This model is based on another model from Thingiverse, but doesn't seem to be available anymore. This one tries to fix all issues with that other model and make it work better for FDM printing. I don't claim any rights to this model.…
The include .3mf file fits an Adafruit BH1750 (light sensor board) snugly and has holes for the pin wires. This design doesn't have the STEMMA QT/Qwiic connection accessible, as my current project cannot use it, but allows for soldering…
Printed with 15% infill and standard 0.2mm settings. No need for support. Print vertically as shown in the model diagram. You need to push the print in to the back vent of the treadmill and it will hold on to it securely.
I bought my E46 without this tube and was reluctant to pay $47.79 for it on FCP Euro. Ended up costing a lot more than $47.79 in time to model and it still isn't perfect. That said, it does fit and is much better than nothing (see…
Natural Gas or Propane carb adaptor. Fits between the air cleaner and the carb. Set up to use a 7/16 hose to connect to pressure regulator. Gasoline operation is not affected. Will need longer screws to attach airbox and adaptor as the…
A case for an ambient light sensor using a Seeed XIAO RP2040 microcontroller and a generic BH1750 light sensor. The case has a sleek cubic design and is modular. The microcontroller mount for the XIAO is easy to replace and remodel, in…
I liked the Wemos D1 Mini Case from FoxPrint3D because it's open for Dupont Connectors. When I built a light sensor with a BH1750 I figured where to put the sensor, and the best place for me was right on top the case. Unfortunately it now…
An easy-to-print, snug fitting little mount for the ole' Archer. Assembly For the correct orientation of parts, refer to the non-plated 3D model. Slide the feet on the cages Mount cages on both sides on the router, hooks outside Hook the…
I remixed the model to improve light influx to the sensor and to keep it better in place. Changes: Added a slope to the sensor hole Added two cylinders inside that hold the sensor in place by it's screw-holes (friction fit). I closed the…
After a decade of use, the door of this refrigerator started to sag. It turned out that the female parts of the door hinges werein plastic, and the top one was worn out. This is a 3D printed replacement. On the picture, the original is…
The lid is modified to fit the bh-1750 boards commonly used for esphome setups. It is based on the remixed esphome housing made to fit the "esp32 devkit v1" which might have a different geometry than the original.
This is a small case for the light sensor BH1750 which can be plugged into the Flipper Zero's GPIO pins. The BH1750 can be wedged into the slot and then wired to a tree and a two pin Dupont Connector which fit into the cutouts on the…
The perfect BH1750 sensor housing for use with Flipper Zero. Perfectly transmits light and allows for accurate data. Small and compact. You can make this module yourself I printed this model with a layer thickness of 0.12. PETG
replacement wheel for pressure washer. may fit other applications. fits 10.4mm dia shaft Category: Replacement Parts
This is a JVC IF-C01COMG card cover for DT-V1710CG, DT-V1910CG, TM-H1950CG and TM-H1750CG, probably would work on the 15" series too. Is compatible only with aftermarket cards built using the IF-C01COMG Clone board THT Full size designed…
I needed a no mar tip for an older model craftsman nail gun. I was able to design this one to fit the curved pressure plate for this nailer. TPU will need to be used, preferably red.
This is a small case for the light sensor BH1750 which can be plugged into the Flipper Zero's GPIO pins. The BH1750 can be wedged into the slot and then wired to a tree and a two pin Dupont Connector which fit into the cutouts on the…
Update 30.01.2026: Improved V2 released for better fit and less filament consumption. Summary This is the one-size-fits-all repeater stand for all the full-size wall plugged AVM Fritz!Repeater and FRITZ!Smart Gateway. All you need is a…
Very slim and compact replacement case for the AVM FRITZ!WLAN Repeater 1750E. Adds a wallmount and all aready existing features from the original case. Open holes around the mains voltage area, visible on some of the images, have been…
