215 models
Designed a case for the Arduino Mega 2560 with a hexagonal pattern, because the ones I found, didn't fit the non-original boards I've got. I Made sure that it'll still fit the original boards. Case should lightly snap together, bottom…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Se requiere un tornillo de 1 mm, similar al utilizado en reparación de lentes.
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Moin! Der Sockel für das Arduino Mega 2560 hat 4mm Löcher, 6 tief, für M3 Gewindeeinsätze. Passend dazu habe ich noch ein Prototypenboard entworfen, in das noch die beiden Steckleisten von meinem Arduino Koffer passen. Der Arduino-Sockel…
Print approx. €0.88–€1.08 excl. taxPreliminary estimate for one variant
This is a 3D model of an Arduino clone of the Mega 2560 microcontroller board. I needed one for an enclosure design, but couldn't find one that had precise dimensions for the mounting holes. Despite no officially-diagnosed OCD, my brain…
UPFRONT: I just created an Discord server for the PVS420 so its easier to talk about and share thoughts, ideas, improvements. All further updates to the design, functions and software will be available on my Discord!…
Es un estuche para tu Arduino MEGA
A sleek, minimalist 3D printed display stand for the LEGO® Speed Champions DeLorean. This stand is easy to print and will look great on your shelf! I printed my stand using default print settings with a few modifications. Since the bottom…
I needed a stand to mount my Arduino Mega 2560, a standard-sized 16x2 LCD display, and a full-sized breadboard. So, I whipped one up in Fusion 360. Some notes: While designed to fit the Mega 2560, the left four holes also allow mounting…
Print like you use to do.
This thing contains a mounting plate and a drilling guide for the “Arduino Mega / Mega 2560 / Due Drilling And Mounting Plates”. The plates are not symmetrical. The notch shall be on the power jack and ethernet cable side. The base plate…
Giant Brick Pirate Flintlock Pistol (x10) Print two part and two join
This model is compatible with the lego system.
Print with glue and monitor the first layer. Nozzle 0.4 Layer height 0.20 Material PLA or similar (would not recommend ABS)
No screws required, just slide it all together. Originally designed to be used as a RFLink case.
This model is compatible with the lego system.
Collection of Gridfinity basic cups height 36 (256mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per…
This model is compatible with the lego system.
Printed in PLA, 0.4mm nozzle, 0.2mm height, 15% infill density, and no supports. Should allow you to read pinouts and wire the board while in case. Can be powered in case. It is a snug fit. I recommend sliding the board into position and…
This model is compatible with the lego system.
Arduino Mega 2560 Case A remix from: @firewolf8385 https://www.printables.com/model/602616-orp-arduino-mega-2560-holder His design fit my Arduino Mega 2560 perfectly... So obviously I had to modify it a bit ;) Removed a few pillars I…
Wall Grid Cover "Honeycomb Design" - 120x120mm / 150x256mm / 150x236mm / Ø120mm - Griglia di copertura Nido d' Ape Resize/Scale to adjust dimension 03/01/2025 added Honeycomb Grid Cover Ø120MM 17/01/2025 added Honeycomb Grid Cover…
A plate holder for six 256x256 plates for Bambu Labs printers for the Multiboard Storage System. Standard Multiboard settings, no supports. https://www.multiboard.io/
This model is compatible with the lego system.
a simple “slipper” for the Arduino MEGA 2560 R3 to prevent short circuits in a "flying" test setup Simply fits under the Arduino Also includes the CAD - Files
A holder/mount for an Arduino Mega 2560 for ORP compatible plates. About ORP ORP (Open Robotic Platform) is an open-source project for developing reusable and user-friendly components for use in hobbyist robotics. By following a set a…
This model is compatible with the lego system.
I recently bought a Elegoo electronics kit and designed this for the board and breadboard.
This model is compatible with the lego system.
I wanted player mats for Vantage, to keep the cards from sliding about the table, and didn't want to pay $20 for the official addon mats, especially because I'll never need all 6 of them. Plus, it's so much more efficient economically to…
The 9th of July, Europe regained its access to space with Ariane 6's launch! For this event I thought it would be nice for fans to be able to print a 1/256 Ariane 64 (sized to fill the entire height of a X1C). This is the most detailed…
A very compact and strong mount for the Arduino Mega 2560. It uses 3 M3*approx. 13mm screws to secure the Arduino in place. The bracket has holes for three heat inserts to secure the Arduino and two on the other side to secure the whole…
--NOTE: so... updating on multiple sites sucks. so i'm not going to keep this repository here up to date. if you want the most upto date version, i'll maintain the cults 3d version. so google for that one-- Introducing the Keccak256 Boom…
This model is compatible with the lego system.
My Mom bought a new VW Passat B8 and we still had a bit of Diesel at home. The only problem with it was that the Diesel was in an gas can. The funnel we use for all the other cars works just fine. But on the new one it doesn't. Newer Cars…
Original found on https://printabrick.org/bricks/2566 but that file was broken for printing. I recommend printing it laying down. Less pretty but much stronger. Print instructions Category: Toy & Game Accessories
Little assembly required and shouldent take too long to print. Make sure to print with Z seam on random and apply some grease to the gears and the main shaft to help it spin to its full potential!
Print setting recommendations: Make sure bridge supports are on for the top piece Print with the outside down Print in a high temp filament in case your keys get left in the car or sun (i used ASA) When disassembling your remote I suggest…
This is a stand for the Lego Delorean set 77256. The stand allow displaying the vehicle flying in the air with a light angle of 15 degree. The stand comes in 3 parts to be glued together.
Design & Function A complete build plate resource pack — includes both a build plate STL model (in 3 sizes) and high-resolution PNG textures for accurate slicer previews. Use the STL to visualize your specific printer's bed in OrcaSlicer,…
(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) Fits a Lifetime table model 80256. May fit others. Check your table clip measurements against the model in Tinkercad before printing. Designed to be…
A simple model of an Arduino Mega 2560 board
I have attached two covers, the first has no holes, while the second has holes, so you can connect the modules you want. UPDATE: I have added a model with holes to be able to screw your Arduino 2560 Mega anywhere. I recommend that you use…
my woven plate which I used for my numbers and letters. Dimensions 256 x 256 mm for your use to create your own designs. please share your designs with me
This is my custom enclosure for the OpenAstroTracker open-source motorized sky tracker for DSLR cameras. Details for this project can be found here: https://wiki.openastrotech.com/ I was looking for a compact enclosure for the minimalist…
Holder for Anker 313 Magsafe pucks featured in this amazon link (https://www.amazon.co.uk/gp/product/B099WRPVJK/ref=ox_sc_act_title_1?smid=AISREEIOH9TSP&psc=1) Which was a budget friendly alternative to the original Magsafe buck. I get…
Stand with optionnal tower to print for my Ariane 6 model (1/256th scale)
Gehäuse für Arduino Mega 2560 mit Deckel und Rückstellknopf
I made 2 versions of the filter. One is optimized for printing on an FDM printer, the other model is almost 100% similar to the original. I printed for myself first with PLA, then with ABS but my printer does not pull this plastic…
It is simply a holder for Arduino Mega 2560 that i have designed for my Printer electronics. Category: 3D Printer Parts
Fibonacci256 is a beautiful 166mm circular disc with 256 WS2812B RGB LEDs surface mounted in a Fibonacci distribution. Fully open-source software, and programmable over Wi-Fi or micro USB cable. Buy from Evil Genius Labs:…
While this is completely my own design and model, I completely copied and was inspired by qfqfq's Arduino Mega 2560 Pro case ( https://www.thingiverse.com/thing:4253336 ). Mine is made to slot nicely onto a standard breadboard using the…
Caja peronalizada para Arduino Mega 2560 con ethernet shield, cierre sin tornillos.
Onshape CAD link for those interested in making changes in the design: https://cad.onshape.com/documents/143c740f42cb21cc45906fdf/w/4bc4bac1614f8c690bb5c467/e/82f31ec3f743aeb42d9d5409 Changes, 19/5/26 - added file for old housing…
It's a remix (made from scratch) with an added space to store the part to switch between the 2 configuration.
I just lopped off the left end of Oscar's Arduino slot and the Mega fits right in.
This case is for Arduino MEGA 2560. Need x3 M3 Bolts.Contact me if you need any info about this print.
Idea behind the design was that adapter should sit tightly without usage of any magnets or screws, and the lens should not fall when adapter is installed or removed. The adapter has an insert that fits into a groove and firmly holds the…
This project is a detailed 3D model of the Arduino Mega 2560 R3 designed specifically as a desk prop and decorative accessory. It captures the iconic layout and components of the board to create a clean, recognizable tech aesthetic that…
Maxed out the print bed of my centauri carbon 2 to print the largest calipers possible while maintaining an acceptable distance between the parts.
SOPORTE PLACA MEGA2560 LLEVA INGERTOS M3/OD4.2/L7
Check out the original design here. How I printed it: PolyTerra PLA (White) 10% Box Hatch Infill (5% Gyroid should also be more than rigid enough) 0.28 Layer Height You can also add silicone or TPU feet underneath to make it more secure.
Introduction This is a simple design to fit over the top of the existing eject button on a Panasonic JU-256 floppy drive to enable it to work as an internal drive on an Amiga 1200 case. This is part of a larger project:…
This build plate rack was designed with love for BambuLab X1C users! :) It can hold up to five 256mm build plates (258mm clearance). The rack has hexagon holes at the base to minimize the material required for this print. The build plate…
This is a remix of the excellent NexGen3D: DIY Steam Machine PRO-V2 case. The original model requires a 300x300mm print bed, making it impossible to print as a single piece on printers like the Bambu Lab X1C. To solve this, I split the…
Any Material works, no supports needed. ✅ Hole spacing (C/C) after research these distances should be IKEA-compatible for the most part and for other furniture as well. These models match the distance from center of one screw hole to the…
IKEA KALERUM (305.536.50) Drill Guide – PAX Door Handle Template (256 mm) This 3D-printable drill guide is made for installing the IKEA KALERUM handle (305.536.50) on IKEA PAX doors with clean, repeatable results. It sets the two handle…
The model has been tuned to have a wide border on one side and no extra border on the other side to be able to (barely) fit the parts on the Bambu Lab X1 hot plate in four pieces. Example printed in eSUN PLA+ Magenta, Bambu Lab 0.20mm…
Ich habe das von lukie80 entwickelte Gehäuse weiterentwickelt und Platz für 2 Mosfets von 3D Freunde geschaffen. Außerdem hab ich es etwas vergrößert und auf beiden Seiten vom Board Platz zur Kabelverlegung ermöglicht. Außerdem habe ich…
This is a remix of the Split Slim Triple where the bottom drawer fits A4/Letter paper size. Requires 256 mm sq bed. Turned on its back, the chassis will print within the Z axis limit on a stock Bambu 256 mm bed, making it just 1/8" wider…
Needed an adapter to install an SKR 1.4 Turbo with TMC2209 stepper drivers, after a few tries I finally came up with one that works. I used Jayo PLA Meta in Gray, 1.8 layer height. M3x5 Screws to mount the board, M3x5 with washers to…
Fits microwave model NN-SN661S and possibly others. Panasonic part # F82569Y00AP Printed just fine without supports on my printer, but your mileage may vary (see orientation in photo). (Probably would have “looked” nicer in a different…
Protective Lens Cover for Mileseey TR256E Thermal Camera
Fibonacci256 is a beautiful 166mm circular disc with 256 WS2812B RGB LEDs surface mounted in a Fibonacci distribution. Fully open-source software, and programmable over Wi-Fi or micro USB cable. More info:…
ATMEGA 2560 Stand w LCD and Breadboard with threadedd inserts for 3D printing M3 x5.7
Use any filament, it doesn't matter, duh. (Except PEEK filament, i know ur broke.)
Step file included, so you can push/pull the bottom face to the distance of your liking. M3 x 10mm bolts and nuts for permanent installation. Dremel or similar to drill 3mm holes. Printing orientation for the joints: vertical, with brims…
This one is a remix of the original design with dimensions suited to 250-260mm sized build plates. I have this same design on my 300 Trident and 120 V0 and just love it. So no reason not to make one for the Bambu as well! All holes are…
Mega2560 ProMini case M2x6 screws Print Settings Printer: Hephestos2 Rafts: No Supports: No Resolution: 200micron Infill: 20% Category: Electronics
Thanks to @PeterH for his "SHOPVAC (50mm) CAMLOCK CONNECTORS WITH MAGNETIC CATCH" and accessories. Using the same principle I made this suction nozzle so I can quickly disconnect the suction from the dust shoe and connect it to the…
repair piece for heater knob for 3522568 volvo 940 non ac printed fine with supports for clips mk3s
Since I had two Bambu X1 Engineering Plates I wanted to change one Engineering Plate with the High Temperature Plate, but that was the wrong side of the plate for my Film Sticking Fixture. So, I decided to mirror the Bambu Lab Film…
A very compact and strong mount for the Arduino Mega Pro. It uses 2 pegs and some hot glue to secure it in place. The bracket has holes for two M3 heat inserts to secure the whole mount to whatever you want. M3 Heat Inserts, OD 5mm,…
Fibonacci256 is a beautiful 166mm circular disc with 256 WS2812B RGB LEDs surface mounted in a Fibonacci distribution. Fully open-source software, and programmable over Wi-Fi or micro USB cable. Buy fully assembled or as a kit from Evil…
Last Updated 09Sep19 - Added a "standalone" version for the bottom-half wish doesn't require a Sunfounder Acrylic case. The file is called "Mega 2560 Standalone Case - bottom.stl" Need M3x5 screws to mount the Mega 2560 to the…
Protective Screen Cover for Mileseey TR256E Thermal Camera
I really liked how this model used less material than the others ive seen butt it was way too tall for any of my printers, so i cut it up flipped it and came up with a model that will fit a 300mm z machine and still offer a good amount of…
MCU Fan cover for the Geeetech A10 Pro, with the GT2560 ver 4.0 MCU. Remix of the model by Despacho3d. Helps prevent print material from falling through the fan grate, possibly causing overheating and failure of the MCU. Also helps to…
This is a Remix of the “Tape dispenser weighted” model. It was modified for the Commercial Electric color tape set from Home Depot - Commercial Electric 1001 754 256. The main body of the tape holder was made narrower to fit the smaller…
Made for this model: https://s.click.aliexpress.com/e/_c43T3aS7 This 3D-printed custom enclosure provides a compact, protective and practical housing while keeping all the main functions easily accessible.
Made two versions of a control box for my P3Steel. Both are made for Geeetech GT2560 Rev a+ (possible fit others as well?) Rev 2 is made for Raspberr Pi Zero, also with space for an DC-DC converter. Attached is also a cover with cutouts…
Battery compartment for the Arduino Mega2560 / DUE board Category: DIY
MKS BASE v1.4 BOX (MEGA2560) CS: Tento model byl vytvořen za účelem updatu staré boxu pro desku, který byl vyroben z akrylového plastu a byl během používání poškozen a poškrábán. Navrhnul jsem ho na hliníkový profil 20x20mm s drážkou 6mm…
Here is the French version of the stand for the Speed Champions (77256): Back to the Future DeLorean model. You will find the pillar and support on the original topic here: HERE ! If you don't have the bricks to attach the figures, here's…
Multiboard Holder for Mileseey TR256E Thermal Camera
An AT24C256 I2C EEPROM Memory Module mount for 2020 extrusions. I am using this for a BTT SKR 1.4 board on my custom built delta printer. This lightly clamps the EEPROM module and has open sides for airflow, although I don't know if these…
Leifheit wandrollenhalter parat royal 25660 - Halterung Zewa Ihr braucht noch eine Welle zum durchstecken, hab ein Alu Rohr mit 15mm Durchmesser genommen. Hab das ganze auch als Part Datei hochgeladen, also kann man es super editieren.…
