262 models
This is my model of F-302 from Stargate franchize. Once again, the model is designed entirely by me and is meant to be assembled with no glue at all. (Thou in my cas I had to use a little bit of glue to fix a gap that appeared). The…
This model is compatible with the lego system.
This model is compatible with the lego system.
*will update more in morning its 3am im going to bed Introducing the Models 302A and 302B mini fume extractors. A more serious alternative to my kirby fume extractor, these mini fume extractors are perfect for all your small project…
This model is compatible with the lego system.
This model is compatible with the lego system.
**All my designs are free to download, but if you like my work please consider to buy me a coffee =)** VW Beetle BUG - 1/18 RC body (PXtoys 9302, 9300) I bought a cheap RC car and designed a new body for it. You can find link to the RC…
This model is compatible with the lego system.
This is a model of the X-302 Prototype with the Stargate attached to it as seen in the episode 6x02 Redemtion. Models of the 302 is basically the same as my F-302 so use the instructions there to assemble it. There are only few changes to…
Two part case for your cheap slim DHT22 board. You can find the matching DHT22 / AM2302 board all over the internet. Just make sure it looks the same - there are many different form factors floating around. Requires 4x M2.5x6mm screws 3x…
Included in this mini-collection: work holding and cable management. For the work holding, the flat Genmitsu workplate has a set of M6 holes set at an unusual spacing pattern, 54mm X and 42.5mm Y. All clamps accept an M6 machine bolt with…
This model is compatible with the lego system.
Shroud and probe brackets for the NG Revo Extruder for the Ender 5, Ender 5 Pro and Ender 5 Plus.
Split up specific stls for printing with different colors in case you have an MMU or equivalent. Dark Gray bits Light Gray bits Just one of my earliest MMU edits that I never got around to uploading. Only MMU edited parts were uploaded;…
Gehäuse für Wemos D1 mini oder andere ESP8266-Boards (Esp32, nodemcu ...) mit DHT22 / AM2302-Sensor. Case for Wemos D1 mini or other ESP8266 boards (Esp32, nodemcu ...) with DHT22/AM2302 Sensor. Print Settings Printer Brand: Creality…
This model is compatible with the lego system.
Remix of original model, all credit for the design goes to the original - https://www.thingiverse.com/thing:856114 Original model caused issues when imported into Slic3r. All I have done to this model is repair issues using blenders…
John Deere 3020 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A single M1x6mm screw…
This model is compatible with the lego system.
This model is compatible with the lego system.
I needed some brackets for the Dell Optiplex 3020M SFF PC, I found 1 other design but it didn't fit and wasn't exactly what I needed, so I designed this. Its Simple and effective. one bracket will hold it up but two is safer! Printing:…
Mine printed in PET-G, upper part is bigger but fits with original lego bricks. Because PET-G shrinks...
Fixing the gap between the two components; now they fit tight together; Taking out the screw hole and replaced with a pin; New Air vents pattern This remix is used in my project here: https://www.thingiverse.com/thing:4352377 Enjoy!…
Antec Case Rail Replacement rails for an Antec case. I was repurposing one of my computers to be an Unraid ( https://unraid.net/ ) server, and while moving things around, I broke one of the rails that hold in the hard drives. I looked at…
I recently was delivered my 1 watt boosters but couldn't find a good simple case for them, I run my antenna wire outside and keep my radio inside so I just needed something to securely mount the board, keep the antenna from spinning and…
This is the missile of the F-302 from Stargate, designed by taichl. For easier printing I made some minor changes and integrated the support material in the STL file. You can remove the support material with a side cutter. For more…
Replacement part (Pillar) 30225762 for Playmobil 5568 This part is not available from Playmobil anymore. Can be printed with PLA but I recommend PETG or ABS/ASA for more stability. Print in 0.2mm or thinner layers. Prints with no supports…
This is a movable model of the Sd.Kfz 302 "Goliath" in a scale of about 1:6 (~25 cm). The Goliath light charge carrier, a self-destructive minitank (German: Leichter Ladungsträger – Goliath), called by the Allies "beetle-tank" was a…
This model is compatible with the lego system.
Republished from my thingiverse: https://www.thingiverse.com/thing:3342804 Links to the parts contain Banggood's affilate metadata. Intro I needed a PM2.5/PM10 sensor during this winter season. I wanted to monitor more than one room and…
Quick remix to install it onto a 34 mm / 32.5 mm valve. Includes the adapter extension pin.
I made this dust shoe after upgrading my Genmitsu CNC 3020 to use a Makita RT0701 trim router. I never really liked how the Genmitsu dust shoe bristles would get crushed and pusshed into the endmill during deep cuts so I decided to make…
This piece is compatible with Lego.
Just a simple case with a snap-in lid. I also added the blend-file if you want to modify it for your use case.
This model is compatible with the lego system.
This model is compatible with the lego system.
Bmw E30 - C302 accessory connectors set. You can find C302 pinouts in the ETM. This connectors using 2 types of pins: - small [amp: 927886-1, oem: 61 13 1 371 607] - large [oem: 61 13 1 359 289] Both this pins available at Aliexpress.…
Similar to all other 3018 drag chains. Unique features: -The prints come out clean without any supports. -Impossible to break - falls apart instead break, tested with PETG -Build in 5.5mm DC connector for spindle - like this -Side m3x14…
New added some new rev files that should allow for stacking of support electronics using standoffs between layers, and slimmer rak 3401 mount and a clip to hold the antenna on tight. 4/26/26 Mounting brackets for electrical enclosures…
I designed this part so I could use the Makita RT0701c as the spindle for my Genmitsu CNC 3020. I wanted to use the original Z axis components cuz I'm cheap and this is a printed part and less than super-rigid anyway. Parts needed: Stock…
This model is compatible with the lego system.
I've designed a simple case for the Rotation LED Clock. The enclosure has cutouts for the lightsensor and the thermometer and of course for the Display. The holes for the Buttons, the speaker and the mini-USB-Port are located in the…
This model is compatible with the lego system.
Print horizontally, or it will break along the layers (see screenshot). I printed it in PETG with 100% infill, swapped out both sides so the car sits flat.
A 65mm diameter spindle mount that replaces the original 52mm mount on the Sainsmart Genmitsu 3020 Pro Max CNC router... The new mount uses all the original hardware. It is designed primarily to be used with the Makita 700/701/702 palm…
Requires 2 of the M2.5x4 screws included in the RAK kit. Bolted version requires 2x M2.5x8mm screws and nuts.
This is an adapter to mount the Andonstar ADSM302 microscope to a microphone stand/arm The hex opening is for a m10 nut. Most microphone arms will fit, I just replaced the imperial bolt to a metric m10 bolt on mine. Some disassembling and…
Overview Even if this mount is specifically for the Andonstar AD407 microscope, the mount may fit for other versions like AD409, AD302 and probably others, too. Just check if your microscope has a diameter of 35mm. If yes, this will work.…
This model is compatible with the lego system.
Parts 2x printed mount 4x M5*12mm socket head screw 4x M5*10*6 hammer nut 1x M4*8mm button head screw Instruction Mount two brackets 115mm spaced onto the extrusion using M5 screw and nut Slide the power supply into the brackets and align…
DHT22 / DHT11 / AM2302 sensor mount. Mount using zip tie or screws. Category: Electronics
DHT22 AM2302 Housing Honeycomb Style This is a housing in honeycomb style for DHT22/AM2302 sensors. Heat up the pin after putting in the sensor and push it down. Thank you to @TueftelTyp https://www.thingiverse.com/TueftelTyp/about for…
Since the Y-axis rails on the 3020 Nova are quite exposed to chips and dust, I designed these simple rail covers to protect them. They're not perfect since chips still tend to hit the rails from the side, but a lot better than nothing.…
Remixed AnthonyZ71's OpenSCAD design so that it prints 2 rails fast without supports // Antec Three Hundred Two (302) 3.5" Hard Drive mounting rails (remix of https://www.printables.com/model/112341-antec-three-hundred-two-302-35-hdd-rail…
For the longest time, I've had my input mixer leaning up against some small boxes. Then I printed the stand here https://www.thingiverse.com/thing:2038119 However I didn't have a good matching set of hardware to fit snuggly against the…
This is a simple stand to use the Zyxel NR7302 indoors. It might also be compatible with the NR7301 and NR7303, but this is untested. To mount the Zyxel NR7302 to the stand you need 4 M4x15-20 screws.
Needed a mount for my enclosure to hold the AM2302 (DHT22) temperature and humidity sensor. Didn't see ones I liked that allowed for easy mounting to the 2020 extrusion frame, so I made one. I have seen these boards from Keyes, DSD and…
I wanted to learn how to use Blender and boy what a ride... as I needed some sort of extra protection for my Flow Z13 as there is simply no extra protections for this device other than vinyl decals. Therefore, I went and use a caliper and…
Microphone arm mount for ADSM302 or similar microscopes with up to 35mm in mount diameter. You will need: 3 x M3 square nuts 3 x M3x10 or similar screws 1 x M3x40 mm or similar screw These parts should be familiar to Prusa owners and will…
CFMOTO 450MT Seat rubber cushion part number: 1) 6KJ0-130204 2) 6KM0-130205
Prints vertically so may need a brim depending on bed adhesion. Tree support used
All Files Corrected 15 JAN 25 7:30 CST This is a single spoil board for the 3040 Y extension to the Genmitsu 3020 ProVer. It also includes the Lightburn 10mm x 10mm grid laser etch. I have included the NC G-Code file as well as the…
This model is compatible with the lego system.
Cables dangling around maybe aren't safe but at least are ugly :) Trays: Hide all wiring. Allow to pass wiring through or from the side. Print vertical with 2 perimeters and no infill. Add 10mm brim. Glue with VHB tape Board cover…
This rack holds all 8 drivers, in handle-size order from left-to-right. The slot is just a teense tight for the #3 Phillips-head driver. Would redo this if I could. Maybe your slicer can open it up just a little. 1mm should do. Note:…
TL;DR Saw this Maker Tales video on youtube and made the exercise in freecad. youtube Maker Tales Motivation Learning by doing Collection exercise, CAD Let's get started Enjoy the video and sketch the model in your preferred CAD software.…
This should be printed with PETG. This locking lever is for the tripods that have the single spiral on the locking lever.
Lego 3027 3028 3033 3036 3456 41539 92438 91405
This is a small case for a LoRaWAN Gateway using a Raspberry Pi Zero W and a WM1302 LoRa gateway module from Seeed Studio. The case exposes only the MicroUSB connector for power supply and an SMA connector for the LoRa antenna to minimize…
The parts hold the PSU on the back of a SainSmart Genmitsu 3020 PRO MAX. Printed with brim to avoid warping. 11.08.2022: Update - Holder with cable guide Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter…
Lego 3020 3021 3022 3795 3034 3832 2445 91988 4282
John Deere 3020 NFE (Narrow Front End) - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A…
Together with my kid we made this case for his DIY clock (soldering project). The clock we have is from here: https://www.roboter-bausatz.de/p/bausatz-rotation-led-uhr-ds1302. Additionally, it requires: 5x M3 brass inserts 4x M3 6mm SHCS…
I built this EC1515B clock kit several years ago and it has just sat around without a case ever since. There are other 3d printable cases out there for these clocks, but me being me, I wanted something unique. To my knowledge, no one has…
Print duration: 2h 30m Material consumption: 25.12g / 8.42m Rafts: Doesn't Matter, ideal No Supports: No (not necessary for me) Resolution: 0.2 Infill: 15 - 20% Filament brand: Any Filament color: Any Filament material: PLA
A little sanding/trimming on the mounting pins is needed if you want to be able to remove the rails easily from the HDD without too much force,
Pro maximalni velikost nodeMCU v3 60mm x 32mm Original model - onShape
Questo modello è il più piccolo che si possa realizzare, i Servo D1302 sono i più piccoli in commercio che ho trovato, Il led Matrix 8*8 è da 1.9, Batteria 3,7 Volt Li-po Con caricabatteria integrato nello shield, Interruttore a 6 pin e…
This enclosure was designed to fit the Geekworm X302 DAC board for the Raspberry Pi Zero W / Zero 2 W. I dimensioned the internal space using the Geekworm PCB drawing found here with a +.2mm tolerance on all 4 sides. For my board, it was…
Wall mount for Bubendorff remote control (ref. 223026). I use double tape to fix the mount on the window frame. Proposed print settings : Filament : PLA Layer Height : 0.16 mm Line Width : 0.44 mm Infill Pattern : Cubic Subdivision Infill…
f 302 if like stargate chage to any size for to your bed
Really liked @drwatson6 design, changed it a bit to better suit my needs. Higher tolerance for component placement on PCB (i.e. compensating for poor soldering in the manufacturing) countersunk holes for wood screws stronger pins for…
Z-Probe Holder for the Genmitsu 3020 Ultra CNC router
lego 3030 3031 3032 11212 3035 3029
Enclosure / Connector for a DHT22 / DHT11 / AM2302 sensor. Included are two different methods of interfacing with the sensor: CAT5 Ethernet Keystone Jack Cable Category: Electronics
1 x TP-Link TL-MR3020 1 x 4g modem e3372h 2 x 18650 with strips soldered TP4056 USB Type-C with protect Dc dc boost converter step up module 5v 1 x Slide switch 2 x pigtail 2 x 4g antenna 8 x screw 2mm
I'll be adding the mounting pegs later so that it can be mounted directly to a 1960's mustang. They should be the same size as the original 289 badge. I have added a blank version of the badge to assist with even more custom badges!
A caddy for your Dell DELL MZ60045 caddy: a caddy². It fits 3020 7020 9020 SFF PCs, and possibly others. This allows you to repurpose the optical drive slot on your Dell caddy, and mount a 2.5" SATA drive in its place. Drives clip in and…
I built this digital clock from a kit and needed an enclosure. So i made this. This is the clock-kit: https://www.roboter-bausatz.de/p/bausatz-rotation-led-uhr-ds1302 Category: Electronics
I made this Gridfinity baseplate so I could organize small parts with Akro-Mils bins on louver panels. The baseplate sits inside a model 30237 bin: https://akro-mils.com/Products/Types/Plastic-Storage-Containers/AkroBins/AkroBin-30237…
CAD model of the Kobiconn DC power jack Manufacturer Part Number: 163-4302-E I found this part on Adafruit ( https://www.adafruit.com/product/610 ) and did not find a model of it, so I made one. Not sure if the part is 100% accurate or…
This model is compatible with the lego system.
Tisk z PETG Tisknuto bez vodorovných a svislých stěn Výplň - Gyroid 10%-15% Může být vytisknut i s svislou stěnou
I combined the SSD tray and HD rails and then modified it to fit my Antec 302 case. Category: Computer
This clock housing is designed for wall mounting od DIY DS1302 Clocks ( https://de.aliexpress.com/item/4000311133709.html ). The USB Plug can not be used anymore, instead 2 wires need to be soldered to the appropriate power holes. There…
Print settings Material PLA Base settings Prusa 15mm QUALITY Modified settings Gyroid infill 6 top and bottom layers 6 perimeters
General This is a replacement for the rubber washer for the Land Rover Series roof (part number 302373). Commercial replacements are available but as you need 14 for the 109 wheelbase, printing can be cheaper. The center hole fits an M6…
NEMA17 motors have wave spring causing axial play. 3020, 3018 CNC contruction connects Z leadscrew directly to motor shaft. This results Z-axis less capable than it could be. Aditional nut restrain leadscrew and releaves stepper bearing…
Spindle holder insert for Genmitsu 3020 PRO v2 CNC machine. Designed it to hold laser that was smaller than spindle diameter. This adaptor is compatible for 43mm and smaller. Wall size is 3.5mm.
![M3302 Ender 5/Pro/Plus [Micro Swiss NG REVO Extruder] - Fan Shroud and Brackets](https://media.printables.com/media/prints/735325/images/5748609_a9d64cd5-5eda-4399-a8be-543f085c15c6_d84847a4-8b28-4e4c-99e6-bdd8af654401/ngrevoender5001_2400x2400.webp)
