Counting matching models…
nothing too much to say. the fan is disconnected but the tolerances are tight so it might not be able to spin for you. could be a cool challenge for your printer? you definitely need a resin printer for this, and even still the “fins”…
This model is compatible with the lego system.
An angled wall mount to allow you to mount the Lego UCS Gunship (75309). This set is notoriously difficult to display due to its large wingspan. This mount utilizes the Lego's original stand mounting location in the floor of the ship, so…
This model is compatible with the lego system.
https://makerworld.com/en/models/783309?from=search#profileId-720729 please check the original creator for license
This model is compatible with the lego system.
My original fans where starting to making bearing noises, so I made these brackets to allow me to install whatever 120mm or 140mm fans I wanted. This bracket allows installation of 2x120mm or 2x140mm fans. This bracket will make the card…
This is a Inspired Doctor Doom 3099 Helmet Full suit available here - https://www.cgtrader.com/3d-print-models/hobby-diy/other/doctor-doom-3099-inspired-suit While there take a look at my other great models Enjoy. Category: 3D Printing
General The 25mm version is compatible with 1 inch cable grommets as shown in the picture below as well as M25 cable glands. But you can use the blank plate to remix your own version if you have different needs for your car 😄 The gasket…
Parts form Ikea - Komplement - 130900/130901
Bracket to mount two 120mm fans to the original heatsink. Designed around Strix 3080ti, should fit any card with the same heatsink design (3090, 3080/ti, 3070/ti). Split into four parts to print simultaneously on common printers. Designed…
GPU: Alienware RTX 3090 OEM card Print suggestion: 100% infill; PETG
This is a replacment part for the "Halter Siebträger" component of the "AEG Electrolux EA 150" espresso machine. https://www.massinger-ulm.de/epages/61366570.sf/de_DE/?ObjectPath=/Shops/61366570/Products/4071330916 The genuine spare part…
This model is compatible with the lego system.
It is designed in 2 different parts, left and right which are screwed onto the switch.
If you have your Saturn V hanged on wall - try put there also moon lander :) Skechup file included - feel free to remix and share :) Consider tipping me if you are satisfied with my design ;) Print Settings Rafts: No Supports: Yes…
This model is compatible with the lego system.
Colgador de trapos, variante realizada sobre un modelo que no he podido encontrar, se ha realizado nuevas secciones y modificado la geometria, tambien para hacerla en redondo. Añadido modelos opt con mejor entrada del trapo, y con dos y…
Design to put your Govee Immersion Camera on the Top of the LG 65UJ6309 Category: Video Games
Work in Progress: This is a backplate mounted cooling solution for EVGA 3090FTW3, it can be used with heatsinks to enhance the cooling ability of the stock backplate, which has heatpipes. I realized the o11 mini's airflow was not doing…
I designed this Cover and Fan support for cooling the SFP+ RJ45 modules in my Mikrotik CRS309 (fantastic router/switch). With this, my modules seem to be running very cool: in fact when touching them I feel they are not even slightly…
This is a panel for mounting the SSD1309 displays and further integration to projects. It may be easily modified or integrated to other 3D projects.
lego 6231 4865 23969 93095 23950 30413 91501 4864 14718 2362
Print in PET(G) or ABS/ASA for heat resistance. This specific chassis gets hot; feel the glass after a bench! Normal settings otherwise. Hope this helps someone!
The blue piece (43093) didn't bend enough to fit into the gray piece (73109), so I fixed that.
Tensor trasero para maquina corexy Sapphire plus, dos modelos para tensar, o bien hacia el chasis o hacia la cama. Category: 3D Printer Accessories
My rear-level sensor recently broke. I didn't feel like buying a new one. Super quick fix. I designed and printed this adapter. The usual failure point is when the bottom ball joint (connected to the suspension) seizes, and the metal rob…
This was a many-variant project that required a lot of tweaking, and I'm still not sure if I got it right. If you run into issues, let me know and I can try to adjust. Print with the smallest nozzle and finest resolution you can have. I…
lego 90195 30044 30046 30045 20309 60808 40066 35565 4218
This model is compatible with the lego system.
Everything is in the Video If you want to makee a re-shroud mode for your GPU let me know and we can talk ;) Category: 3D Printer Accessories
This is for the model/part Carrier 309868-755 (with aftermarket product Packard 66755). These vary for between $250 and $1000 online. My motor was still perfectly fine, the but the broken fin was causing huge imbalance on startup and it…
This clip will replace the clip that holds the 2 halves of the Lifetime folding benches Model # 80309. The original part is ABS, I printed the replacement in ASA because that is what I have. PETG would probably work too but you can let me…
3 by 4 gridfinity bowl for Knipex 975309 Crimping Pliers
This plug was made to replace a redundant socket on a three-way splitter to prevent overcurrent when used with stage lighting fixtures. Use at your own discretion, 3D-printed parts generally are not approved in any way, shape or form.…
Thank you @Nessuno0505_6893 for uploading the Fusion file as well - this makes remixing so much easier and is the main reason I chose this design. The 3mf also includes the nut for locking the holder designed by @TheRedR0cket2_273136…
RTX 3090 FE 12 pin power connector clip. 12 16AWG wires fit perfectly.
The guide with photos on how to fan swap/upgrade most stock GPU fans and use the EVGA 3090 XC3 custom fan mount can be found here .
After having issues with the center brush, I realized that it was working using a rubber belt and after two years of daily usage, It seems to suffer a lot of wear, ending in a non-functional brush. Perhaps I'm not a fan of rubber belts, I…
I made this in TinkerCAD for a project car I used to have before I lost it to a flood. I made these in TPU to get the hood back flush. GM no longer makes these and you can find some third party versions that may or may not work. I just…
Cooler for the EKWB backplate for the EVGA 3090 FTW3 Ultra. Uses 5x60mm/1cm fans. 6mm M3 and 10mm M2.5 screws to hold things together. M2.5 12mm to screw it to the 3090. Do not use PLA as it gets soft at 60C. PETG (80C) or ABS (100C)…
Old Black Lid handle went brittle and kept breaking. Designed a replacement that happens to make the kettle look like a chicken. Print in ABS or other temp resistant material (not PLA, likely not PETG). Enjoy
I recreate https://www.printables.com/de/model/258932-govee-immersion-camera-on-lg-65uj6309 complete new in OpenSCAD to create sockets für any small things that i could put on top of my TV
to squeeze the 3090 founders edition into a mini ATX housing, I built this flat bracket, maybe it will help someone.
Spacer for full collar korean levers for arcade sticks 3mm 4.5mm 5mm Printed on an Ender 3 V3 SE 3 Wall loops 40% infill PLA+
A great solution to display your LEGO 75309 set. This is a clean yet stylish desk stand that can be easily printed in two parts on a standard 25×25×25 cm build volume printer. No glue or screws are required for assembly. The model is…
I wanted a full plate to mount the fans with screws as the card is running on a Bee-link EX Pro. Connecting with just zip-ties seemed messy. I used a pair of Noctua NF-A12x25 PWM fans. The existing shroud screws are way to short, replace…
The skid plate on my Bauknecht GSXK 5020 SD dishwasher broke, so I designed a compatible replacement. Apparently these skid plates fit also refrigerators, freezers and other appliances from many companies. Print in STL orientation at 0.2…
I derived this gimmick from my design https://www.printables.com/de/model/287562. With this I can now place a knob stone plate 4X4 (e.g. BlueBrixx, Cada, Cobi, Lego) on my TV frame. Fits very well to put figures there.
Колпачок для спидометра ГАЗ, Cap for GAZ speedometer
I've made some custom Joystick actuators for the Crown 309MJ. These are sized perfectly to eliminate vertical shaft play, resulting in a solid feeling stick. 2 options for OD 16mm and 16.2mm, depending on your preference. Any issues, let…
You can see more pictures here https://imgur.com/gallery/eRcGVT4 Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 200 Infill: 100 Filament: Prusament PETG Jet Black Category: DIY
Perry Rhodan series that were published in the 60's (Over 3.000 books of approx 70 pages comprise the epos). More infos under https://www.perrypedia.proc.org/ The spaceship has a diamond shape. The ship is used more as a courier boat or…
This is Sebestyén Mátrai's fan mount (split into two parts) for the EVGA FTW3 GPU, see his original model for details here . I printed in ABS with inner and outer brims. I dissolved the waste brims in acetone to acetone weld the two parts…
This will protect your Flexcut FR309 gouge from damaging you or it's self. Printed in TPU for make installing and removing easier.
The 3mf file is painted for multi color print. I hope you like ❤❤ this model!! Happy Printing!! 🎉🎉
Designed this bracket to support my 3090 FE, it wasn't sagging at all but felt better having it supported. This probably isn't very useful for most people since its sized for my specific case setup but figured I would upload it anyways.…
Paper Shredder Plate for Aurora AS1015CD - Fringe Case # 8765309 by RebelTaz Our paper shredder quit shredding - which really defeats the purpose of running paper through it, but I digress. Upon disassembly, I found that the plastic…
Inspired by https://boilingsteam.com/upgrading-fans-with-a-custom-shroud-on-a-rtx3090-goodbye-fan-noise/ Replaces stock fan by two noctua ones for silent operation. I used PETG and with already two months of usage with room temperature up…
Since I couldn't find a ready-made enclosure for the OpenDTU Fusion board with a Fusion POE adapter and 2.4" OLED SSD1309 display installed, I built my own. I think it turned out quite nicely and is quite easy to assemble. Unfortunately,…
The stock fan shroud for the Zotac RTX 3090 sounds like a jet engine at full load, so I designed a shroud to fit two Noctua NF-A12x25s onto it instead of the three stock 80mm fans. Now runs basically silent at full load. Mounts using the…
My softtube connection for my Nvidia 3090 Active Water-cooling Backplate became loose two times already (one side was disconnected). To fix this, I created a securing bracket to keep it in place. Printing I printed it on a Prusa Core One…
Mini jet nozzle insert for Biltema foam sprayer, art. 2000043096. This 3D printed part fits in the quick connector in front of the foam liquid bottle. It is made to give a narrower and more concentrated water/foam jet than the original…
This is a frequently misplaced item from the airbox of a 1985-86 Kawasaki ZL900 and 1987 Kawasaki ZL1000 Eliminator. The original part was too large for my print bed, so I split it in two with a simple lap joint that should be superglued.…
Handle for internal freezer from Gorenje RB3092ANW fridge. Recommended to print with white ABS plastic.
Easily chip your POLA G railway barrier (old version) with a mXion MDC DCC decoder. Slide the decoder into the holder. The support part ensures the holder does not get in touch with the mechanical parts. No double-sided adhesive tape or…
During a move, my Grizzly 14" upright drill press switch plate was broken. Grizzy part no P7943096 has been discontinued. It is an easy print so I decided to recreate from scratch. I didn't include the On/Off text in this switch plate.…
Got a call from a friend who owns a fabric crafts shop regarding her 1984 Pfaff sewing machine. it lost a foot and now wabbles on the table. Using measurements from one of the still remaining feet I made this. Hopefully someone else can…
This is a LBE (Lübeck-Büchener Eisenbahn) T12 (Nr. 142) Streamline conversion cover for the Marklin 3095 BR74 analog/delta H0 locomotives. It took me quite some time to make the model as accurate as possible and that it fits the chassis.…
This is a LBE (Lübeck-Büchener Eisenbahn) T12 (Nr. 142) Streamline conversion cover for the Marklin 3095 BR74 analog/delta H0 locomotives. It took me quite some time to make the model as accurate as possible and printable and that it fits…
lego 90195 30044 30046 30045 20309 60808 40066 35565 4218
This is for the model/part Carrier 309868-755 (with aftermarket product Packard 66755). These vary for between $250 and $1000 online. My motor was still perfectly fine, the but the broken fin was causing huge imbalance on startup and it…
A great solution to display your LEGO 75309 set. This is a clean yet stylish desk stand that can be easily printed in two parts on a standard 25×25×25 cm build volume printer. No glue or screws are required for assembly. The model is…
During a move, my Grizzly 14" upright drill press switch plate was broken. Grizzy part no P7943096 has been discontinued. It is an easy print so I decided to recreate from scratch. I didn't include the On/Off text in this switch plate.…
ORGANIZZATORE GT309 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
This is a LBE (Lübeck-Büchener Eisenbahn) T12 (Nr. 142) Streamline conversion cover for the Marklin 3095 BR74 analog/delta H0 locomotives. It took me quite some time to make the model as accurate as possible and that it fits the chassis.…
In my car was missing drainage grommet . In Porsche this part is located in spare wheel well. In other cars like VW Beetle and Carman Ghia, these are maybe located elsewhere. Of course you must use elastomere material.
This is a LBE (Lübeck-Büchener Eisenbahn) T12 (Nr. 142) Streamline conversion cover for the Marklin 3095 BR74 analog/delta H0 locomotives. It took me quite some time to make the model as accurate as possible and printable and that it fits…
This model is compatible with the lego system.
Rack mount for two IEC 60309 P+N+E, 6h (180°) sockets, occupying approx. 3U Product used ( https://www.amazon.fr/dp/B095SC9CPR?th=1 ) Support de rack pour deux prises CEI 60309 P+N+T, 6h (180°) qui fait ~ 3U produit utiliser (…
Gancho con amarre para poder desmontar partes , como por ejemplo zocalos u otros elementos de armarios , sin bisagras.
This is a replacement part for the speed setting slider on a DeWalt cordless drill. This is part 6 in the drawing in the images. This part should work for the DC720, DC721, DC722, DC725, DC727, DC730, DC731, DC732, DC735, DC737, DC742,…
Portable and compact screwdriver with a set of bits, created from EXTOL CRAFT 53092.
Did part of your exhaust hanger also crack, leaving your exhaust dangling by the flex pipe or rear hanger? Well mine did, with the bushing itself still in good condition and chilling on the exhaust. This replaces the outer cast aluminium…
