Counting matching models…
“This is the way” The Mandalorian, also referred to simply as Mando, is a fictional character in the Star Wars franchise and title character of the Disney+ series The Mandalorian. Orphaned as a young child, Din Djarin was adopted into the…
The source marked this model as adult content.
test https://printedobsession.co.uk/ Rabbit (兎 Usagi?): Rumi's Quirk gives her the attributes and abilities of a rabbit. This grants her incredible leg strength, allowing her to jump and kick with extreme force; she can even destroy large…
Here are some 22LR storage boxes and trays. These are designed to be able to arrange large amounts of bulk 22LR ammo into either a 50Cal or 30Cal standard ammo boxes. I designed one model so that three boxes and 15 trays can be stored in…
“This is the way” The Mandalorian, also referred to simply as Mando, is a fictional character in the Star Wars franchise and title character of the Disney+ series The Mandalorian. Orphaned as a young child, Din Djarin was adopted into the…
I designed these ammo holders to hold 400 rounds of either .223, 5.56, or 300 AAC Blackout ammo. These fit into the MTM .30Cal Ammo Can for storage. Print instructions Photos are original design, I recessed the dividers down a bit to save…
U2 Rack 19" 30cm depth server case for ATX based systems Can be printed on any printer that have 20cm x 20cm print bed. Small server case for ATX/mATX motherboard and TFX power supply, this case supports only M.2 drives Assembly…
note that there is a V3 version out there... https://odysee.com/@c0ld\_d8rk\_h8nd:8 this design is taken from a: Rifling Mandrel-9x19-6gr-polygonal-1in9.82-Twist-8.82mm-Bore step file. this for the use for a 300mm barrel and this can be…
Open the corresponding 3mf file with "Open project...", select your filament and nozzle, use 0.2mm layer height, slice it and switch to the temperature tab. Check that there are multiple temperatures. --> Print and have a look at the…
Leiste zur Bücher binden die ich für meine Frau gemacht habe. 30cm lang / 1cm Lochabstand. ---------------------------------------------------------------------------------------------------------- Bookbinding Awl Guide I made for my Wife…
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop 🏆 To celebrate the win I've added Low-Profile Legs that reduce the height 5cm! 🎆 It's Lazy Susan Mode!! 🍰 MMmmmmm This is purpose-built to make icing a breeze. Retaining rings…
Wall mount bracket for the Bosch 18V charger model AL1830CV. Print it on its side to ensure it is more flexible and durable. PETG is better for this use case, but PLA should be good enough.
This is a PrintInPlace way smaller modification of this model: https://www.prusaprinters.org/de/prints/49007-birth-machine-hr-giger Thx for sharing this in the first place to the David Warboss. I just wanted so have this in one piece in…
I remixed for the Eurobox versions I get from my local Bauhaus. Please note that there are versions for 30 cm boxes, measured side length of grip side (short end of the box), and for 40 cm sized boxes. Also note that each set consists of…
Part combination for overall height of the leg Overall height in mm Screw Base 134 to ~190 115 mm 109mm 154 to ~210 115mm 129mm 174 to ~220 115mm 149mm 194 to ~240 115mm 169mm 200 to 300 169mm 169mm
What do you do when you need to crudely measure something between 0 and 30cm and you don't have a ruler, for some asinine reason? Or you have a ruler in one of a million drawers and you don't want to go looking for it? Well you print one,…
Shelf for IKEA PAX wardrobe mounted with screws that come with the system. Print with PLA, 2-3 walls, 15% infill At least 256 x 256 bed required. Print with brim/mouse ears if possible to prevent lifting of the corners.
Remixed the hooks to mount an IKEA SKADIS pegboard to the 30cm deep version of an IKEA IVAR. This needed a bit more space between the hooks since the SKADIS is hanging in front of the vertical IVAR legs (instead of “between” them, as for…
Size Height: 13.5cm Width: 24cm Depth: 3cm Print two (duh..), on the side. Fits MK3, MK4 and Core One. Use 3-4 walls and 15% gyroid infill for strength. Important The screw holes are very awkwardly placed. Pre-drill the shelf plate, and…
With this model you can make some shelfboards which are compatible with an Ikea Ivar shelf. I made these because I have a door between two Ivar shelfs and I wanted to use also the space over the door, and because there was no Ikea…
I want to put my rear speakers on the wall, without spend money in an official rear mount. And I need that wall mount should be easy to remove the speakers. Then I made it. Is necessary put the bottom to avoid torque in the mount. Maybe…
Remix of: Charizard(Pokemon) von Patrickart.hk | Kostenloses STL-Modell herunterladen | Printables.com Charizard(Pokemon) by Patrickart - Thingiverse You can find the full assemble instruction here: 3D print + assemble Charizard (30cm…
Here are some 9mm x 19mm Parabellum storage boxes and trays. These are designed to be able to arrange large amounts of bulk 9mm ammo into either a 50Cal or 30Cal standard ammo boxes. I designed one model so that three boxes and 12 trays…
UPDATE: Version 2 Hochgeladen. Diese bietet neben einer leicht optimierten Form auch noch ein Loch um z.B. einen Draht zu befestigen. Ergänzt wurden ebenfalls weitere Längen. Sollten weitere Anpassungen gewünscht sein, gerne eine PN…
Fitted prosthetic leg for a 30cm doll (doll: US patent 6,817,921). Designed for a friction fit if the leg is amputated just below the lower leg muscle. Print Settings Printer Brand: LulzBot Printer: TAZ 5 Rafts: Yes Supports: No…
spool holder for large spools, designed around 5kg spool measuring 30 cm in diameter additional parts required -roughly12"(30cm)of 1/2" EMT electrical conduit or other dowel/shaft with roughly A 18mm OD -4 M8X30-35mm or…
Samsung speaker stand. HW-Q930C soundbar. Steel tube with a diameter of 19mm.
I already had some “Bauhaus” versions of this kind of Euroboxes. So I decided to upgrade them to be really closed and have a colorful look besides the sad gray. The only difference I added to the original is some chamfering of the inside…
V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Aktualizace 15.01.2023 Je přidána možnost stojánku na DualSense, zde se tisknou…
Metric version, with 5cm increments from 10cm to 30cm (fits 225x225 bed diagonally) I've printed them in PLA and they work great. List of filament needed based on size (useful to measure scraps and print accordingly, don't leave the…
30Cal Ammo Box PSU mount This mount fits snug into a standard 30cal ammo box and is designed to fit a Meanwell LRS 350 PSU. The PSU mount is offset to give about 2.1" of space for a controller mount and controller. There is a M4 screw…
This is my 20AH LiFePO4 battery box panel specifically designed to slide into a .30 caliber steel ammunition box. It accommodates a 30A switched circuit breaker, a panel meter for monitoring the battery state, a panel meter for monitoring…
Manually operated precision 3 part dispenser for 30cc and 55cc tubes/barrels. Does't require supports to print. Recommended layer height 0.2mm or below. 3-5mm of brim recommended. Takes around 4h15m to print with previously mentioned…
New Wall Holder: https://www.printables.com/model/1054010-running-wheel-wall-holder ********** English ********** A smooth and very stable wheel with a diameter of 30cm. Suitable for hamsters, mice, rats and the like. Still working on…
Hi, this is a smaller remix of my “ 40cm Giant Optical Illusion Wind Wheel (15,75" diameter) " Here ‘only’ the files for the wings (open AND closed) as well of the rotors are available - for the housing or the assembly description please…
Here are some 5.56mmx45mm NATO (or 223 Remington)storage boxes and trays. These are designed to be able to arrange large amounts of bulk 5.56mmx45mm NATO ammo into either a 50Cal or 30Cal standard ammo boxes. I designed one model so that…
Adjustable bore guide for .22 centrefire up to 30 CAL. Print the part: BoreGuide_main And depending on your calibre: BoreGuide_end_22CF-25CAL BoreGuide_tip_22CF-25CAL or BoreGuide_end_26-30CAL BoreGuide_tip_26-30CAL For the shaft use a…
STEP file included
Fits your standard 10cc and 30cc syringes. Small drip tray built in. It does definitely need magnets in the base, since it is so tall. These can be printed in one go without supports, but once you get above ~80mm you will want to slow…
I created this support to use my 2300gr (30 cm diameter) spools with my 3d printers. The spool that I use is from Formfutura but it is compatible with many others. Tested with many Bowden and Direct prints and it works great. It is…
Stand, tripod, holder for nanlite pavotube 15C 30C
Wanted a star I could print for my Bunnings Spiral Obelisk, and I'm too lazy to split a string of 50 pixels into 30, or 25 so I spent 3 days (off and on) drawing and laying out the pixels in this - twice cos the first time I forgot that…
I will be using it with a 32" curved Samsung monitor so the 20cm version of the shelf would have been too shallow for the monitor's stand. The leg ends up being 27.5cm in the long direction so you'll need a large print bed in order to…
I bought syringes of Digikey, not realizing they did not come with plungers 2045-JG30A-BLL-ND. these are 30cc syringes with an ID of ~22.3mm. The piston uses a #018 oring to seal and this works beautifully.
Just a Holder for my meter and 30cm ruler with a small bin.
Here are some 7.62mmx51mm NATO (or 308 Winchester) storage boxes and trays. These are designed to be able to arrange large amounts of bulk 7.62x51mm NATO ammo into either a 50Cal or 30Cal standard ammo boxes. I designed one model so that…
Intended to stick some flat magnets on the bottom to put it on a whiteboard, but also usable on paper. I only printed the 24cm version because it is big enough for me. Would be nice to see the 30cm in reality so I'd be happy if someone…
Here are some 45 AUTO (ACP) storage boxes and trays. These are designed to be able to arrange large amounts of bulk ammo into either a 50Cal, 30Cal, or PA108 standard ammo boxes. I designed one model so that three boxes can fit either the…
.223/556 bullet holder it can hold 30 rounds.
Hi, this is a smaller remix of my “ Giant Wind Wheel (approx 40cm/15,75" diameter) " in diameter. Size comparision 40cm (in background) to 30cm diameter: Here ‘only’ the files for the wings (open AND closed) as well of the rotors are…
This is a simple flux dispenser designed for 30cc flux syringe. It's a 4 part print that you can simply screw in after printing. I'd suggest printing it at 0.12mm layer height for best results but printing it at 0.2mm works just fine.…
This tactical ring makes it possible to hold the Nextorch TA30C Max reliably in more ways. Print in 0.1 mm layer height for better fit. For assembly, slip the adapter ring into the groove of the clip, then slide on the tactical ring from…
Prints in PLA without supports, the base fits a MK3 print bed. I have used 5cm outer diameter drain pipes as they fit through the center opening of a spool to hand the spool in the stand. To keep the pipe in the stand I have used a 4mm…
HP PSU Vertical Mount for 30Cal Harbor Freight Ammo Boxes. These mounts will support/allow for most of our Smart Receiver and Distro Board Mounts. This mount is designed to have the feet fit snug inside the standard 30Cal Harbor Freight…
This file creates a replica of the Asus Rogue Strix GD30ci. It is set to hold a RasPi model 3b. Main Tower: 135g if printed on its right side with normal support set everywhere. Side Panel with Window: 20g if printed flat with normal…
Simple hook to hang an Ego 530 CFM blower on a wall. Printed in PLA with 4 outlines, 20% infill was plenty strong for me.
This is in fact the first 3d printed 1/29 scale train I made back in 2014. i used it to test methods and printer settings before moving to my fleet of ALCOS. I used a USA Trains motor block on this one
Print 9 pins separately and Barks 1&2 together With PETG for outside use. Join parts and glue them together
This tool wall holder is designed for 30cm (12") combination squares, providing secure, upright storage on your workshop tool wall. It cradles the square firmly to prevent slipping, scratching, or accidental falls. Mounts directly with…
Print in PLA. Use IKEA screws to mount. 256x256 bed needed to print this bigger version (angled 45 degrees)
simple arm to use with rollers from https://www.printables.com/cs/model/91112-spool-holder without bearings easily holds spool Ø 30 cm with 2 kg filament
Lead foil holder slides into Varian Accessory Mount (the one at 65.4cm from source) for use with TG51 output calibrations (6FFF in particular). Positions 1mm (+/- 20%) Pb sheet at 30cm from phantom surface (close enough). Natively holds…
Very simple brackets for mounting a Bosch DIY tool charger AL1830CV on the wall (DIY chargers don’t have the wall mounting feature as the professional tool chargers). It uses only the 4 standard enclosure screws, no modification of…
My remix of great spool holder that was originally made for 2kg Prusas spool. This remix allows you to use even bigger 2,5kg spools with 30cm diameter. Update: The lenght of the holder and the weight of the spool was causing a lot of up…
Added 12"/30cm top plate diametr and also fixed height of table top center (was lower for 1mm then top plate). Table top center height smaller for 1mm then it need for top plate, when you tight leg segment into top center threads then it…
Bosch Charger AL1830CV SKADIS Mount with T Clip system
That's it, its the same thing but fits a smaller print bed, i.e. my A1 mini
be careful with treads Picture by Ringo Barret Category: 3D Printing
Manually operated precision 3 part dispenser for 30cc and 55cc tubes/barrels. Does't require supports to print. Recommended layer height 0.2mm or below. 3-5mm of brim recommended. Takes around 4h15m to print with previously mentioned…
Here are some 44 Magnum storage boxes and trays. These are designed to be able to arrange large amounts of bulk 44 Magnum ammo into either a 50Cal or 30Cal standard ammo boxes. I designed one model so that three boxes and 12 trays can be…
HP PSU Vertical Mount for 30Cal MTM Ammo Boxes. These mounts will support/allow for most of our Smart Receiver and Distro Board Mounts. This mount is designed to have the feet fit snug inside the standard 30Cal MTM Ammo Box. Print laying…
Falcon - SRx4 Smart Receiver Mounting Plate This plate fits on the side of the MW 350 PSU and screws onto the side via M4 screws Use the spacer.stl file attached to put into the whole to offset the controller from the board. Use the…
Imprimido con: Prusament PLA Marble Grey
To make better use of the space in our apothecary cabinet, I designed these holders. The holders are suitable for pull-out cabinets (30cm) from Nobilia kitchens. Simple to print. Supports are required.
Lid with area for vent for a 30c tank
This is a holder for a A3 whiteboard. It's designed to fit this exactly: https://www.amazon.co.uk/gp/product/B01AG0Y7OS There are two main legs, which are handed. Other plastic parts needed are two hexagonal and two shaped nuts. Finally,…
A simple holder for the Eufy Robovac's remote control and brush tool. The holder has a flat rear face to allow it to be stuck to a surface using Command Strips (or similar) and two slots in the rear which accept 10mm by 10mm by 4mm…
Box with divisors 275cm x 230cm x 70cm 2 files. Merry Xmas to all!
Fahrradlampenhalter für Taschenlampen mit einem Durchmesser von 30cm.
I needed to mount my baby camera vertically to see down into the crib. This clip connects with the included base mount that I also included, however, I have not tested it yet. The clip slides over the drawer front and is possible to use…
Simple wall mount for Samsung HW-Q930C Soundbar satellite speakers.
Attach the hook to the wall with double-sided nano tape. Then simply clip the frame on. The frame is assembled with the 4 bottom parts. Add some glue into the holes, insert the sticks. Then put the poster in, and secure with top brackets…
Sick of having an annoying 30cm/12’’ ruler in your pencil case? Print this easy jigsaw ruler with no gap between sides!
20mm spacer for the Hanger9 30cc Ultra Stick landing gear to gain extra propellor clearance. Just use 20mm longer bolts to the original mount. Printing in PLA with 4 walls makes a nice solid standoff to spread the load across the bottom…
This was modified to fit the Brother MFC-9340CDW paper tray where the tabs may break off on the paper end stop. The original design had a larger gap between paper and the stop and didn't fit close enough for my needs. Added 2 different…
Made a longer version so it fits the deeper Enhets
I would love if you liked this so i will could get Prusament 😂 ( please ) Just drag and drop the file to your favorite slicer. Set layer height to 0,2 mm. Hit print and wait untill its printed. 😉 Here is how to do it in PrusaSlicer: Then…
ReadMe.txt Anreisshilfe zum gleichmaessigen anzeichnen von Massen. Die innenliegende Druckplatte verhindert, dass die Fluegelschraube auf das Stahlmaß drueckt und dieses beschädigt. Bestehend aus: 1x Oberteil 1x Anlegestueck fuer 30cm…
used this for a soldering box easily remove one lid to use my soldering station. lid is easily to click in the box Printer: Ender 3V2 Material: PLA Resolution: 0.2 infill: 25% supports: No
Records of her always appear quite abruptly Sometimes it is just a passing annotation overlooked by later generations in an old history scroll, sometimes an ancient ballad with no known author, and sometimes a few hasty lines left by a…
Dies ist die Stange des Fensterausstellers für 30cm hohe Dometic Fenster im Alkoven meines Wohnmobils. Original sind rechts und links spiegelverkehrt, aber eine Version sollte ausreichen, wird dann am Fenster nur andersherum eingeklickt.…
Carriage belt Type GT2 Size 1300mm X 6 mm Category: 3D Printer Parts
Ammo can divider for 30 cal plastic ammo cans. Dimensional changes to fit Member's Mark brand ammo cans sold in set of 4 at Sam's Club in US. New dimensions are 145mm tall x 108mm wide at top. Flipped to print face down instead of…
Printable parts to make a small end table out of spare 30cm tiles. The ceramics store across the street was throwing out old sample tiles, I upcycled a few of the more interesting ones into mini tables. To attach the legs you can use M3…
Christmas ornament approx. 30 cm in diameter, printed in vase mode. Glue-on hanger clip. Prusa XL - vase mode - PETG - 0.4 mm nozzle Weihnachtskugel ca. 30 cm Durchmesser in Vasenmodus gedruckt. Aufhänger-Clip zum ankleben. Prusa XL -…
A small case with a Lock, dual axis torque hinges, and inner latches for securing objects. All parts are connected to the case using M3 screws + M3 nuts/M3 inlays. the axis for the hinges and the lock in the example pictures are 4mm…
For smaller trofast boxes
model je optimalizovaná pro tisk bez podpěr, u starších podložek doporučuji límec 2mm
