203 models
Every BMW owner knows this situation.. you're driving into some curve with about 100 km/h, your rear end goes left while you wanna go right and then it happens.. your Redbull that you put in the OEM's cupholders spills and you have a mess…
Mithilfe vom WagoTower, gehören quer verteilte Wago Klemmen im Werkzeugkoffer der Vergangenheit an. Mit diesem Spender können bis zu 11 Klemmen platzsparend aufgenommen werden. Durch den Hebel an der Oberseite können diese handlich mit…
For Radxa Zero 3W/E,use official Radxa 5519A heatsink with 1703 fan(SUNON UF3H3-700) connect to +3.3V/GND. Use 4xM2.5 heat set inserts and 4xM2.5*10 countersink screws to fasten the Cover and the Bottom. For Radxa Zero 2Pro,using official…
The Yakovlev Yak-3 (Russian: Яковлев Як-3) was a single-engine, single-seat World War II Soviet fighter. Robust and easy to maintain, it was much liked by both pilots and ground crew. One of the smallest and lightest combat fighters…
Simple case for the Radxa Zero3E. This is my first ever 3D design. I made 2 bases and 2 tops. The bases have two options: One with all usb and micro-HDMI connections and another with just the usb-c to power the thing for preset tasks. For…
Hello there! I was looking for a plug and play speaker replacement for my BMW E46 Compact (CAUTION! This model has bigger front door speakers than all other E46 - this adapter is only fitting for Compact!) and wanted better sound quality…
I created a version of the box lid that's two pieces instead of one. I also added the BTT Manta logo on the 1st piece and added a mounting point for a 4010 fan on the 2nd piece. I also removed the vent holes on the front of the case, the…
TC3EC 433MHz Moxon Antenna by TA3NT For detailed information, you can read our related blog post(TR). This antenna was designed by TA3NT under the name "TC3EC Moxon Antenna" to meet the antenna needs of 433MHz LoRa Meshtastic Nodes in…
I designed the holders so that the measuring coils are neatly in one place in the control cabinet. A lower (2.stl) and an upper (1.stl) part are screwed together by 4 screws. 4 M3 nuts are pressed into the lower part. The holder holds…
Praetorian Guard armor the mandalorian s3e7 + helmet made by https://www.printables.com/@ccary17_761396
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words not printed yet Category: Mechanical Toys
Update 6/9/2024: Changed to a single piece lid. Edited rearwards 4010 fan to be positioned better above the stepper drivers Pushed section that sits on the y axis extrusion further back to give more clearance for belt tensioners Pushed…
(DE) Set von einfachen, stabilen 90° Winkeln. Bohrungen mit Kegelsenkungen. Versteifungsrippe in der Winkelecke. Vielfacher Verwendungszweck. Schnell und leicht zu drucken. (EN) Set of simple, sturdy 90° angles. Countersunk holes.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This part is designed to replace and improve upon the TrackHat (V1) camera mount for the PS3 Eye Camera. It holds the camera reliably on top of a computer monitor. Supports are built-in; simply cut them off with snips or a utility knife.…
A mounting plate for the BIGTREETECH Manta E3EZ V1.0 controlboard to attach it to a DIN rail. This mounting plate is designed around the DIN clip ( pcb_din_clip_x3.stl ) used in Voron electronics bays like in the Voron 2.4r2. To use this…
Repair gear for rear wiper motor part number 98700-3e000 987003E000 For cars Kia Sorento Hyundai SantaFe 88 teeth 53.6(7) mm diameter 10mm central shaft hole 7mm side shaft hole 5.45 angle
A simple case to protect and cool a Radxa Zero 3E with PoE HAT installed. Prints in two halves and slides together. The sliding action also press-fits and retains the PCB stack. I really like this little board, and intend to buy a few…
Print it and place it in your home. I placed in on the door frame. Have fun and please let me know if you have any suggestions to optimize it.
When upgrading the main controller board to a Bigtreetech Manta e3eZ (or other Manta board) with a CB1 computer a new touchscreen is also required, as the stock Ender 7 screen is not compatible. This screen surround is for the BTT HDMI5…
Wanted a side mounted case for the E3EZ with enough free space for cable management. Added the logo from here: https://www.printables.com/de/model/500230-bigtreetech-manta-logo Printed in PETG with 4 walls and 15% infill. For mcu fan a…
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words Category: Mechanical Toys
Update 2026-06-29: add opening for 25mm fan Update 2025-06-07: add v2: remove small connection between GPIO opening and Ethernet port Snap fit case for Radxa Zero 3E
This adapter plate mounts onto the factory standoffs using countersunk m3 screws (about 6mm in length). Then the Manta board can be mounted on the adapter plate standoffs using M3x4mm screws. Since the location of the USB and SD card…
Modified mount for the switchwire to fit the Manta E3EZ board
Крепления для AJAZZ AKP153E, AKP153, AKP153R на монитор.
A smooth and clean enclosure with hex ventilation holes for the Radxa Zero 3W and 3E: https://radxa.com/products/zeros/zero3w/ https://radxa.com/products/zeros/zero3e/ Prints in 3 parts (top middle and bottom) and 4 legs that slide into…
Je cherchais un moyen de placer le niveau laser à n'importe quelle hauteur. La qualité d'impression n'est pas terrible… mais la fonctionnalité est la… 3 dia différents pour s'adapter aux 3 diamètres de l'étais. Le fichier Step permettra à…
Sikorsky CH-53E Super Stallion Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Just print snap the two parts and cut your pizza, you can use it as a fidget spinner after
Printed of PETG, with supports. Spare vacuum bag holder Philips VC-H4213E-14
My NICE remote didn't came with a wall supoort so i made one :)
Simple diffuser for Olight i3E EOS flashlight. Print upside down for best results to not need any real support. Prints great in PLA or PETG and works especially well with a glow in the dark filament.
Changes: 11/18/2023 - added mantlet part and updated instructions 1/2/2023 - original upload Parts: The cannon support is fixes the cannon the in forward position The muzzle brake looks more accurate to real life and directly replaces the…
I recommend printing vertically with supports. This will provide the most strength.
Needed an Eletronics box for my E3EZ, so I made one loosely based on a similar box by Ishampadron, over on https://www.thingiverse.com/thing:6052240. The box has support for a single 4010 fan that sits above the first 3 stepper drivers,…
Battery cases for Panasonic Lumix DMW-BLG10E and DMW-BCM13E.
board mount for Manta E3EZ. Please note that none of the ports stick out of the existing openings, but who cares? It's running Klipper via wifi anyway.
This model is compatible with the lego system.
3er Gira 55 Rahmen mit einem Slot für einen Shelly Wall Switch. Ich habe hier einen Shelly WS4 verbaut.
3er Steckdose Aufputz, 3-way surface-mounted socket What u need: 3x Socket Ip44 https://de.aliexpress.com/item/1005006495376156.html?spm=a2g0o.order_list.order_list_main.185.48765c5f4daKOw&gatewayAdapt=glo2deu Screws countersunk screw M4…
Tricycles VW beetle (3e model of 5) Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 -200 Filament material: PLA Note: Trim can without support!
Ein Remix meines Cases für einen 40er Lüfter. Würde hier den Noctua 40x20 empfehlen Alles andere ist gleich ;) Es werden kurze und normale Einschmelzmuttern M 3 benötigt sowie Nutsteine + Schrauben um es am Profil zu befestigen. 6xM3 Kurz…
Use 9V block battery to drive hasselblad el series. Need two M3 screw and a battery cable to work with. DO NOT USE CHEAP BATTERY. It takes high current to drive film back. Cheap batteries could work with the body itself but will not…
A pencil/pen vase to keep your favorite pens and pencils, or anything else, in. It has zig-zag shapes all the way around it from top to bottom. Similar to other vase 893's with a different design twist. (Last of the 893's!) It is 110mm…
Mounts 2 4010 fans above the stepper drivers HW required: 4010 fans x2 M3 30mm x3 M3 10mm x6 You can also use thicker fans if you need to, but regular 4010s work well enough for me. Also not necessary to mount them into all the holes, Im…
This is a model of the M4A3E8 it's the wider chassis with a 76mm cannon turret mounted on top. The tracks and wheels are printed separately for easier printing and easier multicolor. The turret has a bushing to make it rotate smoothly and…
Now compatible with the SKR3 (non EZ version) and Prusa MK3 frame. If you like my design and want to use it on different frame, just contact me and provide the hole spacing, I will make sure to update the design for you.…
Ich hab hier ein eigenes Case für das E3EZ Mainboard entworfen und enige Ideen aus dem Ender Design übernommen. Es werden kurze und normale Einschmelzmuttern M 3 benötigt sowie Nutsteine + Schrauben um es am Profil zu befestigen. 6xM3…
Exactly the same size as original ones. Can work with orignal parts Print with MJF or SLS need a M2*12 GB119 PIN and a Ultra thin spacer. You can cut a toothstick and a piece of film instead. Category: Camera
TC3EC 433MHz Moxon Antenna Splitted By TA3TRV For 220x220mm Printer Beds Print Settings Printer Brand: Creality Printer: Ender-3 S1 Pro **Rafts:** Doesn't Matter Supports: No **Resolution:** .16 Infill: %20 **Filament:** Porima ASA Beyaz…
Hier habe ich 3 gestapelte Rohre mit den folgenden Maßen: Innendurchmesser: 20mm, Länge: 60mm. Gedruckt aus ESUN-PLA+ da diesen Lebensmittelecht ist. PETG eignet sich auch. Gedruckt wurde es auf einem Anycubic Mega X. Die…
Easy wall mounting for your Worx WG163E Trimmer. Mounts to the wall with 3 screws. The mount holds the WG163E by the foldable handle. Printed in JAYO PETG with 3 walls and 15% infill. No supports are needed. Print as oriented in the file…
10 Einzelteile, zum Ausdruck und danach einzeln verkleben. einmal ein 50 cm Mass (Stern ist 50 cm hoch), bei einer Dicke von 10mmx10mm , zu drucken auf einem 22er Bett, bzw ein 100 cm benötigt ein min. 38 er Bett, dann 20mmx20mm. Man…
A tactical holder for your i3E light complete with spike and knuckle spikes.
Y 3er Rohradapter 5cm für Absaugung designt weil ich es nicht zu kaufen gefunden hab. Mit 0,6 Nozzel mit 0,2er Layer höhe mit PLA gedruckt.
Update 24 JUN: idk what was wrong with me when I uploaded this, but discription has been fixed for actual model. ADHD had me distracted lol My take on a SKR 3 EZ mounting plate for an Ender 5 Plus. ***PLEASE READ NOTES AT THE BOTTOM**…
Simple, no support hanger for headphones that slips over a "large" (17003es) command hook bracket piece. I couldn't get the strips to adhere well to PLA so I made this so I wouldn't have to worry about it. Just store the hook Category:…
Here's a model to mount your BTT Manta E3EZ V1.0 MCU to a DIN rail inside the Ender 3 NG v1.2! Designed to clear the 24V power supply, and leaves room for the USB and RJ45 port.
Problemlos gleichzeitig, ohne Stützstruktur und mit 0,2mm Layerhöhe druckbar. Viel Spaß damit :)
Verschiedene Blenedn für die Alu-Profile vom Vyper. 1 x Eine Bleande Clean 1x Eine Blende mit E3EZ + dem Schriftzug 1x Eine Blende mit dem MANTA Rochen!
This is a modified electronics books to be able to Mount the Manta E3 EZ control board.
A friend bought a wowgo 3e and within a few days the front pivot cup had all but disintegrated, and the rear wasn't far behind. I took a few measurements and whipped this up, printed it in TPU and it's been solid since (been a few months…
Anycubic Vyper / Bigtreetech E3EZ Case…
die ideale Futterschüssel wenn man 3 hungrige Tiger hat ;-)
Design This is a handy charger that you can mount on your wall or sit on your desk. It is built with both the stock and sport bands in mind. I used some peel-and-stick velcro to secure it on both the wall and the stand. Printing When I…
English (deepl translat) I needed a mount to attach the board to the printer. The holes are 15mm apart in the middle. I also used M3 nuts with a tolerance of 0.1mm. I have uploaded the step for editing. Deutsch Ich brauchte einen Mount um…
Mounts 3 4010 fans, 2 above the stepper drivers, 1 for the CB1 HW required: 4010 fans x3 M3 35mm x4 (for mounting the bracket) M3 10mm x6 (for mounting the fans) M3 Nuts x6 (for mounting the fans) I used Winsinn 40mm 24v 8500RPM Fans (…
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
Minimalistische Sitzfiguren – Modernes Deko 3er-Set
this is a 1/35 scale M4A3E8 Sherman seat for loader and tank commander made by request for someone on facebook. marked as WIP until its been fitted to a Sherman and conformed to be accurate. Print Settings Printer: cr-10 Rafts: Yes…
Print with a couple perimeters and leave it hollow as seen in printing photo.
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
I got a used RC8B3e with out a battery tray. so i try to make one on thinkercad Need a flathead self-tapping screw
Always seems like theres nowhere to put the antenna wire when installing different electronics. This fixs that issue.
Olight i3t/i3e/i18 flashlight holder for IKEA Skadis pegboard Print with supports
Comes with the freecad project. Hardware: 4x M3x12 Self-tapping 1x M3x18 ish Self-tapping 4xM4x10-16 (i used a tap and bolts, self-tapping will likely do. there is enough clearance for longer screws too) pre-tap before putting it in the…
Prints good laying on its side as it is in the second picture with supports touching buildplate only. I'd recommend 0.12 layer height but I had good results with 0.2 as well.
A mount to put in a BTT Manta, with fitting fan mount and one mosfet mount. I decided to let the extruder run directly from the board and just use one of my existing mosfets for the bed. Unfortunately I just realised that I missed taking…
BTT E3EZ NG Mount. This Mount is for the Ender NG of RH3D. you need 4 M3 Short heat inserts. Link of the projekt: https://www.printables.com/de/model/469280-ender-3-ng-corexy-beta
Sammler / Halter für Zeitschriften, Bücher oder Broschüren im Format A4 in verschiedenen Breiten. An den Stirnseiten jeweils ein Loch damit man es mit einem Finger leichter aus dem Regal ziehen kann. ……………… Collectors/holders for…
Stand für Olight i3E Eos Hexagon Halter für Olights. Alle Größen sind untereinander kombinierbar. Entweder einzeln stellen oder alle zusammen stecken, nach Lust und Laune. Weitere Modelle: ithx + i1R2 EOS:…
Fossil Watch Stand in three easy pieces. No supports or rafts should be necessary. No glue, friction fit. Fits a 26mm charging puck. Falster or Fossil and probably more. For stability fill the base with loose change or washers or anything…
The two halves are identical. Print the file twice. The model uses 5x2 magnets that are press fit. (If the magnets won't hold by pressing them in, use a bit of glue)
I like the holder, I like the stability feet, I just used the same concept to add a box to hold some tools. A very small box, but big enough to hold tweezers, steel brush, sceaning sponge and even some nozzles. Print instructions -Gyroid…
Voici un lithophane du vitrail de Zelda Windwaker. 3e modèle. Faites vous plaisir ! This is a lithophane from Zelda Windwaker’s stained glass window. 3rd model. Enjoy ! Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
Eine Lichtschalterabdeckung für Wandschalter, die es ermöglicht, einen IKEA STYRBAR Schalter einfach mittels Magneten zu befestigen. So kann der ursprüngliche Wandschalter im Notfall problemlos erreicht und genutzt werden - einfach den…
Ich habe hier noch einen Spieleständer bezw. Die besten 3 N64 Spielstand gemacht. Extra in Gold damit es was Trophäen Treppchen Artiges hat. Nach dem druck habe ich nochmal den Höhen Abstand nach Skaliert damit es was gleichmäßiger…
MANTA E3EZ DIN RAIL MOUNT AND 2 FAN MOUNTS . MY EZ2209 DRIVERS HEATSINKS HAVE HORIZONTAL FINS HENCE THE DESIGN. IF SOMEONE HAS VERTICAL FINS SEND ME A DM MAYBE I CAN DO SOMETHING. These are some of the parts : 4 M3 Brass Heated Inserts 4…
Original design by PhD Poturak Semir: www.Linktr.ee/3esign : No needs for supports, regular print settings should do.
I wanted a six-inch dust port for my planner to up the game on the dust collection. After designing it I had to split it in half because it was way too big for the MK4. At the split I added material for several screws to hold the two…
3er Gira 55 Rahmen mit einem Slot für einen Shelly WS von @CuBy auf einen 3er und 5er "nur" Shelly Wall Switch angepasst
A themed case for ProxMark 3 Easy boards. With the release of the Wayfinder, many crystal makers are shuffling to be compatible. This case protects your board while having a universe friendly look. The print ready files are presliced for…
Was able to tweak the original design to add a slider to indicate good or bad battery state. I would expect it to look a little better if I had multiple colors but for now marker pen will have to do. Created using Autodesk 123 Design.…
This is a quick fix - I do hate sticky tape repairs. So I did a 3D scan of the remote open, drawe some lines in freecad, printed and it works for me. It is not very fancy it just works, see improvements list. I printed it with 0,4 nozzle…
Print in ABS oder ASA Wandlinien min. 5 30% Infill
****UPDATE*** Someone figured out how to flash the original MOBO and THR so this isnt needed if you dont want to switch to BTT ecosystem. I have completely gutted all of Kingroons' control boards in my KLP1 230, and replaced them with BTT…
Camlock Vacuum Adapter for Bosch GOF 1600 CE / Bosch MRC23EVSK Router. Snug fit without the need for PTFE tape.
Vielleicht wohnt man ja zu fünft in einem Haushalt... ;)
Dieser 3er-Feuerwerksraketenhalter ist geeignet für kleine und große Raketen. Er ist besser als die Lösung mit Flaschen, die umfallen und wegrollen können. Für die meisten Drucker mit einer Druckbettgröße von 200 x 200 ist dieser Druck…
