Counting matching models…
Lid for 0.5L and 0.33L beverage cans to prevent insects from entering the can. Material consumption is just 10,5 grams (3,5 meters) of filament. On most cans, the lid snaps shut and doesn’t open on its own—this feature has proven useful…
Update 25.06.2023: 3 models added I also had tried different cutouts in order to save some filemant. Therefore I had created three different models: The first one has larger cutouts for faster to printing (3 hours instead of 4). It has…
Bottle Adapter for Can 0,33l / 0,5l + Extra File for 0,25l Here it is….. the printable adapter to convert your can into a bottle! Short Snag fit for 0,33l / 0,5l Cans + Extra File for 0,25l Cans E.g. Red Bull Good tightness tested with…
Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini with an VL53L1X / TOF400C sensor and keep the whole thing as small and modular as possible. Later on, the project will be used with ESPHome and…
I was able to remix of the beer bottle helmet for FDM printing ( https://www.printables.com/model/236264-beer-bottle-helmet-insect-protection-bierflaschenh ) and I love the design, Now I was faced with the ban of glass bottles on my…
Passionate about aviation and aircraft engineering, I couldn’t imagine not modeling the Airbus Beluga XL (A330-743L) — one of the most iconic cargo planes in the world, instantly recognizable with its unique “smiling” design. The model is…
A hook and and a "spreader" to help you dry your 3l CamelBak bladder. This is a remix of theRatchets excellent design for 1.5l bladders - thanks for sharing the .f3d. I made hook and spreader and bit larger so that it fits better for my…
LEGO Compatible 32184-Technic Axle and Pin Connector Perpendicular 3L with Center Pin Hole
45 degree twist lock oil funnel. Originally designed for 7.3L godzilla in a Super Duty. Probably will work with other ford engines. Printed in PETG. 3 layer wall thickness 30% infill
Video about project: https://youtu.be/iKGNek3DkK4 My second case design, this one focused on required the fewest extra parts as possible. I already had a parts list in mind so this isn't the smallest I could make it, but had a few…
LEGO Compatible 87082-Technic, Pin 3L with Friction Ridges and Center Pin Hole
I wanted to use it as a countertop compost can but was annoyed by the bag being visible on the outside, and how often the bag would fall in. The larger bins in the system all come with plastic rings to keep the bag inside, and I can't say…
VZBot electronics mounts on din rail: Orange Pi 3LTS BTT Octopus PRO with 5160 Only BTT Octopus PRO PSU Meanwell RD35 DINrail clip You'll need screws and nuts M3
Mein Dosenhalter (0,33l) für BMW F-Modelle. Ich nutze den Cupholder in meinem F87 M2, die Energydrink Dosen wackeln nicht mehr hin und her :) Druckt am besten in PETG aufgrund der Hitze die im Sommer im Auto entstehen kann. 0,25l-Variante…
Address change ;) https://learn.adafruit.com/adafruit-vl53l1x?view=all # SPDX-FileCopyrightText: 2022 wrdaigle for Adafruit Industries # SPDX-FileCopyrightText: 2022 Kattni Rembor for Adafruit Industries # # SPDX-License-Identifier: MIT…
This model is compatible with the lego system.
This model is compatible with the lego system.
Hey everyone here's my design for an ultra compact mATX case with GPU support. Intro: The build was made almost entirely from spare parts hence the unusual combination of hardware. The unconventional orientation of the motherboard was in…
Modelled these Lid Props for my Fluval Flex 123l. For My configuration you need to print: -2x Fluval Flex 123l Front -2x Fluval Flex 123l Corner
Print with your favorite material, I used Sparkle ABS+ Bright Orange at 0.2mm layer height. Mount to the wall with #6 wood screws or metric equivalent 3.5mm Enjoy the easy open tool storage solution. Fell free to search my profile for…
Fruit Fly trap for classic O,3l thread jar working with classic 0,3 thread jar Lid name is TO66 Print settings 0.2 mm layer 4 walls 15%infill no supports
This model is compatible with the lego system.
Custom completely printable SFF PC case able to fit Nvidia RTX A4000 (slightly modded). The goal was to design and develop the smallest possible PC with powerful workstation graphic card with four display outputs. Parts: MB: Asus ROG…
I remixed the original model by 3D Logic (which is a remix of Wynn G's model) to make it compatible with thick boxes. My Daft Punk 10th Anniversary Edition 3LP failed to fit and thus I needed to add some depth to the holder
Dosenhalter für den i30N, Fastback N und Kona N für 0,33l Dosen. Mit diesem personalisiertem Dosenhalter verschüttet euch kein Getränk mehr beim Gas geben!
As I didn't found an enclosure that checked all the boxes, I've designed it myself. It's a an enclosure with a print in place hinge and embedded magnets. Has the space for the soldered wires that are going to stick through the back. The…
Use low layer height and flexible material, You can use brim. Tested PLA 0.15mm, brim, filament need cca 3.5m.
I needed a Rack for a big amount of DDR3/DDR3L SO-DIMMs, so they dont just fly around in antistatic bags and on countertops etc. Also works for DDR2, although I dont know why you dont just throw those away. DDR4 is a bit wider and doesnt…
I love the original model of Dynarun but I wanted some changes. As I wanted to be able to fit bigger spools, I bought a 6.3L container and after the initial help of Dynarun to get a general fit, I recreated the complete model in Onshape…
Deckel für normale Getränkedosen PLA Füllung 50%
The Airbus Beluga XL is a specialized cargo aircraft designed to transport oversized components, primarily for Airbus' own aircraft production. Introduced in 2019, it is based on the Airbus A330 platform and features an enlarged fuselage…
Einfache Aufgleishilfe, es wird Support benötigt, kann auch über eine Weiche verwendet werden Simple rerailing aid, support is required, can also be used over a turnout Category: 3D Printing
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a vented oil funnel for 2.3L MZR DISI Mazdaspeed engines (like my 2012 3). I could never find a funnel that sat well in the oil filler, so I made this one. It is rock stable on the engine. It fits snugly inside the filler hole,…
Dryer for Source Deuter hydration bladder 3l Version 1 as shown in the photos without step at the dryer's foot. Verision 2 with step at the dryer's foot for stabilized standing and better ventilation. Print Settings Rafts: No Supports:…
This is my own can dispenser. If you need different diemensions or anything is wrong you can message me :) Can diameter: ca. 60mm Can lenght: max. 148mm (than you have 1mm on each side buffer) Amount of cans it can hold: 11 cans Max.…
Description If you print in the orientation provided, you shouldn't need supports. Also included in the photos is my Case for ElectroCookie Mini PCB Prototype Board . This housing is designed to accommodate a VL53L0X Time-of-Flight (TOF)…
Für 3l, 5l & 10l Kanister Gewinde 45x4 (DIN 45) Ausgießer mit Belüftung, kurze und lange Version. Trichter mit Schraubverschluss Gedruckt in Petg For 3L, 5L, and 10L canisters with 45x4 thread (DIN 45) Pourer with ventilation, short and…
A lid for 0.5-liter and 0.33-liter beverage cans that prevents insects from getting into the can. On most cans, the lid snaps into place and won’t open on its own—this feature has proven useful in my car because it prevents spills.…
These are 2 quick prints meant for use with "Really Useful Box" 0.14L and 0.3L Containers to hold 20 AAA or 20 AA batteries. These are containers that I purchased for cheap at Staples. Each can hold 20 AAA or 20 AA batteries securely. I…
This model should print fine with whatever default settings you have. No supports needed. The lid is set up with ~0.2mm clearance so most printers should be fine with this. If you run into tightness problems, try either sanding the edges…
Liftmaster Remote 893LM Holder Share your Make:)
This is my own can dispenser. If you need different diemensions or anything is wrong you can message me :) Can diameter: ca. 66mm Can lenght: max. 115mm (than you have 1mm on each side buffer) Amount of cans it can hold: 10 cans Max.…
This is chassis for VL53L0X Time of Flight distance sensor for my INAV 6.1 based F450 type drone to use as range finder. Use M4 nut and screw DIN 912 type (imbus) to connect dist_bdy4_top with dist_bdy3_top. Parts dist_bdy1_bottom,…
This model is compatible with the lego system.
Can holder adapter for a first Gen CRV. For 0.33l coke cans with 60mm diamater. (Standard EU can).
This is a sizing blank.
Case for Khadas VIM3L with M2X extension installed.
I designed this years ago to be able to do walnut blasting on GM 5.3L engines. It fits in the cylinder head opening but is untested in its effectiveness of operation.
Originally, I was going to make loops that the bins would sit in, but when I realised there were little holes in the back of the bin edges, it got me thinking. Then I got distracted. Then I found and recreated the screw mounted version,…
This is a remix for the lever part from EmGi's excellent Magnet Insertion Tool. https://www.printables.com/model/1008467-magnet-insertion-tool-v2 The Magnet Insertion Tool is an awesome design. However I had troubles with the rubber. No…
The Vl53l0x is what's known as a time of flight sensor. This sensor can measure a distance using a laser! However these sensor are well.. sensitive and can detect a transparent visor pretty easily. As it is usually not possible to place…
I made these tools in order to allow me to store my engines without leaking everywhere or to allow me for a clean removal by leaving the radiator hoses on either the engine or Radiator, I have also included a few variations of some…
Ich brauchte einen Flaschenhalter für die Werkstatt. Mittlerweile hängen aber auch an anderen Stellen im Haus welche, z.B. am Kicker ;-). Man schraubt einfach den Halter fest und schiebt mit Hilfe des Doppelschwalbenschwanz den Becher von…
I loose my stand for my TV.. so here it is
A self watering pot designed to fit inside a 3L really useful box. Print and glue on legs, I found my box to not be flat in the bottom, so left off the middle leg so it sat in the box better. The middle leg isnt really needed. Thread a…
Clamp for rigid attaching Wildman 3 Liter bag do Motus Scooty 10 Lite. It will work for other scooters with 40x33mm pipe. Parts labeled U (up) go in place of the upper velcro, and D (down) in place of the lower velcro. Punch and drill…
This support arm is intended to be used with the original base and stem from Divideby0 and to fit a 3.0L Camelbak bladder without resting weight on the inner/center bladder support. I printed in PLA following the manufacture's print…
This design was created by Matthew Byington over in the Home Assistant Community, I am simply sharing it here with Matthew's permission for others to use. Used as an optional housing for the Gas Meter Remote Reading project found here .…
If you want to use the cheap VL53L0X breakout board with your Gaggiuino as a water level sensor, here is an enclosure for it. Parts needed 2 disc magnets, 5 mm dia. x 2 mm ht. (same as for Scales Mod)…
a small boxs that hold ESP32 with Time Of Flight sensor, with multi state buttons
Just a simple holder for 0,33L cans (tall & slim cans). 64mm between the two M5 mounting bolts (standard) Works fine with PLA and PET/PETG, but PLA might break after 50 cycles or so. I have added a TPU/FLEX-variant as well, because I have…
This is version (3) it uses n-20 drive motors and Futaba s3400 servos. for batteries I recommend these 3s models https://palmbeachbots.com/collections/batteries-chargers/products/copy-of-galaxy-3s-11-1v-lipoly-pack. This was designed in…
Remix of the popular Endbots Vector beetleweight (3lb) combat robot with numerous improvements.
This funnel is made to ease the filling of a 8oz (.23L) Stanley Adventure Flask. The funnel only fits on the standard mouth flask not the wide mouth. It slips over the spout of the flask with an interference fit. This means that it should…
Inspired by thing:3215912 by t/u:AlpoHassinen , designed this 7in x 5in x 5in stand from scratch to fit the 3 liter Kirkland Signature wine boxes that can be found at Costco. Can optionally be used with my other design, the spill catch…
Hi there, my name is Aaron and I built a 3lb combat robot! The files are not beautiful, but it works! Github: https://github.com/AZ3Dp/Combat-Robot-Repository
Vasemode sleeve for 0,33l-bottles like fritz-limo and becks (beer). Print instructions use vase mode
Build Notes This design started with a 1966 Leslie S-31 horn. The S-31 bell, back cap, power chamber, and single-bell manifold were drawn in Fusion 360 at full scale. This is still a work in progress. The files may change as I continue…
Tool holder for Club Hammer 3LB/1350 Grams. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 100mm W - 60.29mm H - 64.5mm We…
printed in abs and has been holding up well try and keep hardware from old one. mine broke i leant on it
I recently turned my Paulimot/SIEG SX3L drilling/milling machine into a CNC version of it and althugh I attempted to mill all adapter plates out of aluminum, I got lazy and built the Y-axis out of PLA and now share the result here.…
In setting up a mobile cart for my SLA 3D printer I discovered that it was hard to move without the liquid in my 3L ultrasonic cleaner sloshing out. So I modeled this gasket that fits inside the lid and in my case I hold the lid down with…
This 3D-printed enclosure is designed for an ESP module ( D1 Mini ) and a VL53L0XV2 time-of-flight sensor for monitoring the oil tank level of a heating system. The model is designed for an oil tank with a BSP G1 1/2 thread but can be…
This modification allows you to remove the 3 LEDs from the end of the light to be used with another project and replace the lights with a blank panel. In this process one short piece of wire soldered across two contacts make the other…
ABS printed 4 walls, with 40% infill 4 M3x8 socket head screws to mount the PI
Halterung für das Icom HM-243LS (Lautsprechermikrophone) Holder for the Icom HM-243LS (Speaker Microphone)
This is my own can dispenser. If you need different diemensions or anything is wrong you can message me :) General information: Max. height: ca. 390mm Max. lenght of the dispenser: 412mm Dovetail joint tolerance: 0,19mm Hexagon joint…
This is my first 3d Designed and Printed Hookah. I used an old 3L Bottle of Berentzen. Every Bottle with a neck OD of 36mm and a length of 36mm would work The Thread of the Base is a 45x4,5 Metric Thread The Pipe is a 16mm OD Aluminum…
This is the case I designed for the QwiicBus I2C Extender endpoint with the VL53L0X Time of Flight (ToF) sensor. This was designed for the side distance sensor for ResinChem Tech's Parking Assist project. I built the original Parking…
Allows you to protect the geologist's hammer or, above all, protect other objects that share space with the hammer Smartfil Flex TPU 93A, 10%, without supports, Permite proteger el martillo de geólogo o, sobre todo, proteger los otros…
Casing for ESP8266 with HMC5883L to clamp it to water meter for smart home data logging. Link to Project Wasserzähler Smart Home ESP8266 HMC5883L Print Settings Printer Brand: Anycubic Printer: Kobra 2 Rafts: Yes Supports: Yes Resolution:…
Mount to solidly affix a TS5823L FPV video transmitter to the rear deck of a Hobbyking Q450 DJI Flamewheel clone frame with integrated power distribution board. It's designed to place the VTX heatsink directly against the PCB frame of the…
This is an Organizer Tray for the Ford “Pinto” and “Lima” Series engines in order to organize the Hydraulic Lash Adjusters and Cam Followers in your Cylinder Head. I made this to be a fairly loose tolerances to allow for fitting. There is…
A trophy for the best "beer die" / Snappa player or a decoration for a beer lover who plays board games
I find new G3L Outlander radiator is vulnerable to take sticks inside radiator. So I wanted to make metal cover. I added dxf model for plasma cutters. Also included measurements wher to bend it to make it fit. No need new holes. It fits…
Gridfinity Shadowbox for the Fujifilm 50-140mm f/2.8 R Lm OIS WR. Cutout has been included on both sides so you can flip the lens around to store it with the collar foot. Assumes you are using the lens hood Stepped so it sits snugger due…
Can Am Outlander G3L work light mount Hardware 30-35mm M3 bolt to work as hinge pin. 2pcs M6 bolt to fix mount around bumper tube.
Allows you to protect the geologist's hammer or, above all, protect other objects that share space with the hammer Smartfil Flex TPU 93A, 10%, without supports, Permite proteger el martillo de geólogo o, sobre todo, proteger los otros…
My garage door opener was activating on accident. This is a simple cover for the remote that prevents activation of the large button. It's held in place by friction and the notch on the rear of the remote helps to slide it out. Category:…
I got a new bike with a telescopic seatpost. The only suitable place to mount a rear light is under the saddle. The bike has a Selle Royal saddle, which comes with a mount for various accessories. I found a matching model on Printables…
I used 4 magnets (6*2.5mm) for mounting panel
I designed this little battery holder to hold two NB-13L batteries and an SD card for my Canon Powershot G7X. They are held in by a grippy TPU flap. I printed the main body out of ABS but I'm sure PLA or PETG will work fine. Everything is…
I wanted to put lights on the Hero Me 7.4 I am building for my cr10. I couldn't find any that fit standard LEDs so I combined two of the stock ones and did some clean up and printability sculpting. Should work with your already finished…
Can-Am (715006097 ) LinQ 30 US Gal (139 L) Trunk Box to Fit without removing rear rack. I bought this box for my atv. It was annoying that it needed to remove rear rack to make this fit in linq system. I made adapters that make it…
Do podstavce pasují 3L balení https://www.alza.cz/maxi/alzaeco-universal-3-l-60-prani-d5614757.htm Spodní odkapová miska, do které se vejde odměrka z DM : https://www.dm.cz/denkmit-odmerka-k-pracimu-prostredku-p2099999036112.html Tisk bez…
Allows to perfectly fit 3L bin on top of 22L bin
