Counting matching models…
Con esta plantilla podrás interpretar el estado de la nivelación de la cama en tu impresora Ender 3v3 SE. Ten en cuenta que si el Offset z da malos resultados en la nivelación en tu maquina, tienes que buscar las razones por las cuales…
Printed lying on its face. 3 walls and 3 top/bottom. 15% grid infill. Very solid, but the pin version isn't great imo. For V2 you will need supports as shown in the photos.
Required parts: 2x M5 x 16mm 1x M3 x 12mm 1x M5 Washer 2x F695 Bearings The washer should go between the top bearing and the printed adjuster. Snug the M3 x 12mm screw, but do not tighten it. The bearings should spin freely. If you don't…
Ender3V3KE CR ADXL quick mount without extra screws, just using the 6 screws that coming with the sensor.
Понравился дизайн,переделал для Ender 3v3, тем более для этого принтера вовсе нет никаких крышек,а моя сломалась... Скрестил оригинал и от k1.
Used community 3d model of 3v3 KE to add some of my own mods and some other popular mods like @NeedItMakeIt Z support and linear rails u can upload whole model in Fusion and then export what u need to print. 2.1.2026. Added more stuff…
Clips on the Gantry, Prints in 2 pieces, there are 2 ‘keys’ one is slightly larger, find the one that fits best and press the 2 halves together over the key. if you print with supports, they will go into the keyhole, but they do dig out…
For Creality Ender 3V3SE, the Nebula Pad holder, taking into account the installation of a filament spool holder behind it. The holder is more vertical and away from the center. I recommend printing PETG Speed 30-50 Density - 25,…
Remix of parts of two main board boxes. This is set up to hold SKR Mini E3V3, RPI, U2C Canbus and LM2596 Buck Converter Mount holes are at 2.80mm so should self tap M3 Holes on the right of the case are for M5 Heat Inserts RPI fan is for…
Test 1 warstwy dla drukarki o polu roboczym 220x220x220mm W tym wypadku Ender 3V3Ke
Hola buenas esto es un perfil con impresora,filamento y más para la Ender 3 V3 SE ,si tienen alguna sugerencia mensaje.imprime muy bien boquilla 0.4 espero ayudar.
LED light, LED svetlo Ender 3v3 KE
Diese Halterung für den G-Sensor ist perfekt geeignet für meine Nebula Kamera Halterungen. *** This bracket for the G-sensor is perfect for my Nebula camera brackets. → Nebula Camera Z Axis Mount Ender 3 V3 SE / KE / + adidas → Nebula…
Camera holder for Creality Ender 3 V3 SE/KE printer. With attachment for the original Nebula pad holder.
See Henlors post for the BOM. A few changes made though are using an M2 screw and nut (the nut is designed to be a tight fit) rather than a tapping M2. The other was I just used a generic switch from Aliexpress that was 1A 125V and had a…
A reverse bowden tube adapter for the official Ender 3 V3 SE/KE sensor. Allows for the use of the original bracket. Important The sensor has the filament port slightly offset in both the X and Y direction. See the pictures for correct…
Instead of being for just an axial 4010 hot-end fan, its now 3 :) I made the vents to work well with my NF-A4X10 axials to replace the loud blowers that come stock. (Fitted on a 3v3 KE - Not tested on the SE but should fit) Aesthetically…
Added a cutout to the outside wall to make it easier to grab things out of the tray.
I kept breaking this design until i decided to beef it up. I used PETG this time. Also, the mounting flange MUST be 2mm thick. Or else it will throw your bed level OFF big time. DO a bed leveling when your done mounting everything. This…
When clipping on to the gantry, put the tiny clip edge on first, so that the bar is angled downward and hinge it upward to pop the rear hooks over the top. also, the keys still seem pretty tight, you might want to scale them down a couple…
A fancy light bar for your Ender 3V3 CoreXZ! Works with most LED strips out there. Easy to attach, easy to remove. I used standard WS2812B strips attached to a WLED controller. Don't trust the adhesive on the back of any led strip. They…
Eine G-Sensor Halterung um das Kabel sauber nach hinten wegzuführen. Geeignet für meine Rooftop Kamerahalterung . Nicht geeignet für hängende Halterungen. Ich werde eine Halterung entwerfen die dann passt. Link wird hier nachgereicht.…
Updated model with improved rigidity and printability
Made for Capricorn PTFE tube 4.0mm OD; vertical hole diameter is 4.5mm to accommodate for sag when printing, horizontal hole diameter is 4.3mm Printed in PETG (because it matches my fan ducts), .2mm layers 15% infill
This is a clip to prevent the filament spool from slipping off the rod, made for the Ender 3 V3 SE and KE spool rod. This happen cause of the spool weight and the holder bending. The spool slip off and it is more dificult to turn the spool.
LED light bar bracket for the Ender 3v3 PLUS, for use with the Creality LED light bar. Includes a place for the switch that comes from Creality, along with a hidden tunnel for the wiring. You will likely have to extend the wires, as my…
Upgrade advantages: higher flow compared to the stock better flexible filament print quality better quality retracts faster hot end heat loooow noise hotend radiator cooling powerful dual 5015 printed part cooling. Honestly, this is…
крепление для камеры nebula ender 3v3 ke. Усиленная версия. печать желательна из пластика petg. mount for the Nebula ender 3v3 ke camera. Enhanced version. petg plastic printing is desirable.
Decided I wanted a vault door on my knob so here it is Printed with supports Looks even better when paired with this screen case as in photo
A holder of PTFE tube that comes with Creality Space Pi drier allowing direct feed into Creality Ender 3v3SE
I used PETG 20% infill and 0.3mm layer height
I was wanting to upgrade the extruders on my Original Ender, Ender 3v2 Neo and CR-10 Smart XX, and found the extruders from the Ender 3v3 CoreXY to be a sufficiently fast extruder. Purchased a few and then realized there weren't really…
Clip to move out filament run out sensor out of middle of the top rail in ender 3 v3 KE. In my case I have filament holder put at left side of my enclosure so I had to move the filament sensor to the left as well. There are two models -…
I really needed a way to level the gantry of this bed slinger horizontal with the base so i could level than the build plate versus the gantry: Not a forward task with this extruded base and custom extrusions so i started in Fusion 360.…
I purchased a Nebula camera to increase the usability of my Ender3v3 printer. I looked for a printer bracket on cloud, but couldn't find a suitable model. So I did a new model. At first, I was in a hurry and tried to install it in a…
I have dual 5015s on my KE and the standard model would not fit. I didn't want to remove the fans as it would skew the results with the variation in weight. It's not great for the placement as I know it should be as close to the nozzle as…
ender 3v3se spool holder The spool holder is reinforced and the stabilized spool stop reduces spool swinging
Support de camera Nebula pour Ender 3 v3 Plus ce modèle a été inspiré d'un support pour Ender 3 v3 KE https://www.thingiverse.com/thing:6439139
(external) mount for the spool holder to mitigate the Z-Wobble uses the original top mount and its screws (M4x10) so that no additional purchase is required Support=No Infill=15% Tested with 1 KG spool
Keeps your cable tidy after relocating your runout sensor. I use 8 clips for my printer.
It goes on pretty snug right bellow the pressure sensor, maybe you might need to sand it down a bit for a perfect fit but it's better this way so it goes on as snugly as possible reducing vibrations as much as possible. There's a 3D…
A generic mount that attaches a webcam to the filament runout sensor bracket on the Ender 3V3 CoreXZ. This will likely work with the 3V3 Plus as well, but i do not own one so can't be sure. I have my runout sensor removed (Using Henlors…
Prowadnica filamentu umożliwiaca zmianę kierunku filamentu z boku lub od dołu np. do pobierania filamentu bezpośrednio z suszarki, która stoi obok drukarki ender 3v3 se
Made this clip because I had 2 cheap USB LED lights laying around which my dad modified both lights to only need 1 USB connection - And now I have light! I prefer the tight fit for stability but increasing the scale by 1% should do well…
I made this nebula camera holder for my Ender-3 V3, because other holders I found are incompatible moving with z-axis and the side spool holder. Mount photos with test pieces Replaced original M3 screws with longer ones (10mm)
I've created a 3D model designed for the Creality Ender 3 V3 KE printer. This model adjusts the screen's position, moving it slightly closer to the print bed. This modification is useful if you find the default screen placement a bit too…
Okay, so I didn't really design it from scratch, but I managed to get my original Ender 2 Pro spool holder test piece to ensure the screw holes are correct. I used the side mounted spool holder from @CHEP for the Ender 3 printers, if you…
Creality Ender 3V3SE Upper sensor holder
Suitable for standard mounting points Material: PETG Resolution: 0.2 Supp: Yes Magnets 5*2 for 4020 fan mounting - 2 pcs are enough
This button is designed as a cover for the main button of a 3D printer. It features a marking on the surface to indicate the direction of rotation: turning it to the right increases the height, while turning it to the left decreases the…
i modifed the model so the z axis switch would actually click itself all remixes all allowed make it even better
I put my printers in an enclosure and I am now creating cases for the boards to go on the outside. This is the second case. It is for the SKR Mini E3 v3 board. The lid holds a 40x40 fan, works with Nautica Fans as well. You only need…
Я спробував кілька тримачів філаментних датчиків, але жоден мені не сподобався. Деякі з них змусили датчик створити положення, де він додав додатковий опір нитці, тому я змоделював свою власну версію. Він схожий на той, що йде в…
5/7/25 Update - After fitting a new X carriage I had to adjust the mount slightly. Now sits further back and higher up Nebula Camera mount for the Ender3V3 Plus, should work on the regular V3 assuming it has the runout sensor. I am not…
Print setting for screenmountreplacement layer height: 0.2mm buttom surface pattern: Archimedean Chords infill: 12% infill: adaptive cubic Print 2x LCD riser stand and insert them in the screenmountreplacement slots Thanks to…
Cr10s pro v2 conversion to Skr Mini E3v3 board. BOM 5 x M3 heat inserts 4.5/5mm width
Malý držák flešky od Creality
Clip for led: https://www.aliexpress.com/item/1005006322232967.html
This fits over the Ender3 V3 Plus stock rubber feet on all 4 sides to protect the bed's full range of motion from obstacles I found this necessary for the 3v3 Plus because the bed is so huge, and it can often move far enough to hit…
Loved the original model so I remixed it to add heated inserts to the carriage and backing plate. There wasn't enough meat around the belt mount to put inserts so these remain as threaded into the plastic. You will also need the locking…
Design Concept The Ender 3v3 Core XZ Light Holder is designed to seamlessly integrate additional lighting onto your Creality Ender 3 while maintaining the printer's overall aesthetic. The minimalist approach provides a sturdy yet elegant…
The original Description: Neptune 3 and 4 Series (Ender 3v3 se/ke for this remix) Swiveling Filament Roller Guide I have created a swiveling filament guide for the Neptune 3 and 4 Pro-Series, as well as the Plus and Max models. This guide…
It was a bummer for me to see how is the print doing even with led strips on the edges of my box for the printer. So I came up with this. It just hooks on the X axis motor. I recommend to print it in PETG because of the heat, PLA will…
3D model description Filament guide for Ender 3V3SE may work with KE, but not tested. This requires no extra bolts, and also turns your spool 90 degrees. 3D printing settings Infill-100% ABS-250C Nozzle ABS-95C Bed PLA-210C Nozzle PlA-60C…
Requires 2x m4x16 screws – 6mm longer than the originals. This works well with my nebula camera mount – keep the USB cable tidy.
A tiny clip for the holes on the lower right side of the 3V3 frame. Might fit the 3v3 Plus as well, but no guarantees.
Homing will use one of the screws used to mount the belts to the carriage. Use a socket head cap screw on the hole AWAY from the pulley on whatever side you home with. Use a low profile button head cap screw on the opposite hole. If…
Model is ugly and was put together in tinkercad in a few minutes. All credit to original creator. rook 2020 electronics back pack orange pi 3 lts and pico by human | Download free STL model | Printables.com
I had a problem with crochet on original model, it was weak. So, after I printed spine cable chain I realise that top part of chain shoud be connected to nebula support, so here we go) but still need to use plastic clamp for stable at…
It's pretty self explainatory really, needs supports.
This is a 3D printable replacement or upgrade part specifically designed for the Creality Ender 3V3KE 3D printer. It functions as a Y-axis tensioner cover or end cap, replacing the stock black plastic component. Features: Compatibility:…
PETG 245° 0.3mm line / 0.08-0.12mm layers / speed (at your discretion) 5 wall / 4 top-shell / 4 top-shell / 30 infill
This camera mount can be used on the right or left side of the Ender3V3KE. It mounts to the V Wheel cover and uses the factory screws. There is also a plain cover if you want to add a little color to your printer or if you want the sides…
Version 2 now available: https://www.printables.com/model/1219990-ender3v3se-screen-and-octopi-mount I have left this up so that the basic screen or printer mounts can be used still.…
This is a redesign of my previous version. Base screen mount, and printer mount files are available on the original model page, to design your own mounts. Improvements Hole now present within the mount for the ribbon cable to go through,…
E3V3SE-REVERSE BOWDEN. V1 = NO FITTING & NO CABLE CLIP V2 = NO FITTING & WITH CABLE CLIP V3 = WITH FITTING & NO CABLE CLIP V4 = WITH FITTING & WITH CABLE CLIP
Manilla sobre puesta para monitor de impresora ender3V3
Supporto per poter montare il Raspberry Display 7" con dentro Raspberry Pi3b+ sulla staffa del porta bobina della Ender 3 v3 SE cosi da aver integrato il tutto in una posizione che non da noia e che rientri nell'ingombro della stampante…
This is a custom fixture designed for my LED lamp setup . It is print-optimized, requiring little to no support. The LED panel measures 38 mm in width and 1.2 mm in thickness (refer to the attached image for details). The model was…
You will need 4 M3 screws , one longer than 13mm , another longer than 17mm and two longer than 20mm ( can use 4 M3 by 20mm screw too ) and two M3 nuts. The sensor mount mounts on top of the print head wire harness holder by replacing the…
In order to use this Nebula holder, you need to remove the filament runout sensor form its original position (including the angled plastic spacer, that the runout sensor is mounted to). A bit of extra space has been added to give more…
Mounting adapter plate to allow the BTT RaspberryPad5, 3D printed backplate to mount to the original Ender 3 V3 SE screen mounting bracket peg interface. This allows you to mount your Klipper host running KlipperScreen (or anything using…
Дизайн Этот аксессуар для 3D-принтера разработан под стандартную лампу для принтера creality 3v3se. Использование Испол
I wanted to use a dial indicator to level the bed manually, and I couldn't find one for this model. I hope it helps Cheers! Category: Hand Tools
I was tired o having them in the zip lock back in my drawer so I made this for a multiboard. I printed it with 0.25mm layer, 15% infill and 3 walls
It's like putting spoiler on a prius. Be aware of the fan holder position relative to the bed of the printer, so it won't scrape it when prints. This is done to lighten structure of toolhead to achieve a little more speed and stability +…
Creality Ender 3v3 KE limit switch
Wanted a unique Toolhead cover for my Ender 3 V3 Plus. Still a work in progress
Use this link to get the gcode Free Image to G-code Converter | PNG JPG to Pen Plotter G-code Tool Just use gluetape to glue it on itll hold its for 10 mm pens . if you need another size just request.
LightBar holder Ender3v3 no support no support - holds generic LED bar on spool holder for creality ender3 all versions. use any generic led usb light bar. use small zip ties or twist ties to fasten to light bar.
Complete redesign on fusion to fit my printer as the frame was fatter. I loved the original design, but it fell short in being compatible. Print it PETG minimum.
