Counting matching models…
Replica of the genuine Fidlock magnetic base. Model has two internal cavities to drop in magnets during print then print over the top. Pause print at desired layer height to place the magnets. (Layer 60) Magnet size is 13x2.5mm. Careful…
Update (--> for Breacher & Battle Axe) --------------------------------------------- Silly Shell with 3x airtight Elite barrels 6x Short Darts / 3x Elite Darts / 18 caliber .50 foam balls Update 30.9.2025: Modified shell, suitable for…
Wanted a nice way to store my Hohem mic box and needed to practice 3d modelling so here's to my first model. It keeps the box and the 2 mic covers for windy areas. I might make a version 3 that's a bit higher for a better fit, but this is…
Remixed from the models made by Denwagg - 9 slots was too many for us and 3 wasnt enough for storing minis at events!
MA3 Viz Key GF Case A 3x2x6 Gridfinity case specifically designed for the MA Lighting MA3 Viz Key, featuring a TPU insert. shout out moths
Gridfinity IFIXIT Mako Screwdriver Kit Holder (3x2 base). 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill. I did a filament change to make the text a…
This is a 3x2 beam bracket that allows Lego Technic arms and parts to change 90 degrees. It's useful for building Botball robots when a sensor needs to point down or some part needs to change directions on your model. It can be printed in…
Please Check Out all my other Gridfinity Tool Holders here ! :D ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 3x2x3u Gridfinity Socket Storage for: - Harbor Freight QUINN ½ inch drive Sockets and ½ inch extension,…
This is a replacement similar to the stock one, on a Grizzly G0513X2BF, as well as a narrow version. Can be printed without supports.
Great for EDC organization! I've been printing mine with a 0.6mm nozzle at 0.18mm layer height, but really most settings should work. I haven't calibrated flow for text with the larger nozzle because I'm just interested in legibility not…
Philips Ultinon Type N Adapter 11183X2 Material should be at least PETG better ABS, ASA because of the possible temperatures in the light housing. For strong clips the layers should be parallel to the clips. Check the positioning in the…
jedná se o držák na 4 kebely cyky 3x2,5 který jde pomocí hmoždinyk přichytit do zdi a nebo pomocí vrutu do dřeva vrut M4
This is a remix of a version that used 3x3mm magnets and required drilling/dremel to achieve a good fit. I had dozens of 3x2mm magnets leftover from another projects and do not yet own a dremel, I downloaded the medium sized box and did…
Model created with the Gridfinity Generator from. https://gridfinity.liorbk.com Thanks for creating the tool!
I removed the X's on the side and middle, so it has fewer retractions.
Made this to fix a Porter-Cable Belt Sander Dust Collector Bag. If this helped you out, tips are welcome on PayPal or Venmo If you decide to print or remix your own, I'd love to see a picture of how it turned out. Category: Tools
04-01-'24 Edit added at the bottom! This is an adapted version of my other drawer box set . This adaptation makes it possible to print on a Bambulabs printer. This boxset is 230x230x97mm To make printing easier I have, where neccesary,…
Replacement cable hooks that allow for more and thicker cables than the ones that come with these Amazon monitor arms. Two hook sizes available - normal and larger Both hooks latch onto a 3x2cm rectangular monitor arm Works great with PLA…
Replica of the genuine Fidlock magnetic base. Model has two internal cavities to drop in magnets during print then print over the top. Pause print at desired layer height to place the magnets. (Layer 60) Magnet size is 13x2.5mm. Careful…
Gridfinity based sorter for US coins. Model includes slots for 44 quarters (4 per slot), 45 nickels (5 per slot), 140 pennies (10 per slot), and 70 dimes (10 per slot). Bin is 3x3x2 with magnet holes in the base. Model contains raised…
Small sorting tray designed for the tiny things, can be slid and moved around between Gridfinity bins. Perfect for small screws, bolts, nuts, washers, bits and bobs. Prints without support! Layer height 0.2mm
I wanted to store my saw blades together with my saw inside the L-Boxx and to protect the saw teeth a little bit better. The Box screws together and has a lite snap fit in the middle. I attached the fusion file so you can edit it to your…
🧱 Mattoncino LEGO Compatibile 3x2 – File STL Stampabile Questo file STL ti permette di stampare un mattoncino compatibile con il formato LEGO 3x2, ideale per costruzioni più ampie e strutture personalizzate. Grazie alla sua forma compatta…
Multibin Insert that holds 25 mm paint bottles like Warpaints and brushes. This insert fits a 3x2x0.75 and 3x2x0.5 Mult
This is a 3x3x2" corner foot, which could probably also be used as a lower friction slider. It is attached with 5 #8 wood screws. I used it to raise a spa step a bit off the ground, to keep the wood from getting wet. This is not a heavy…
I used the Gridfinity Bin generator from https://gridfinity.bouwens.co/ and created a gridfinity holder for the Kailh Choc V1 keycaps. I wanted to have something that would easily organize my keycaps so they're not scattered all over the…
Small surface mount box, for hiding cables and wago connectors - just shorter Please use low-current sensor and signal wires only . It is not suitable for mains wiring due to potential safety risks and regulatory non-compliance.…
This is gridfinity bin for my gun cleaning kit and balistol contain: 3 little holes fit for 3 nozzles of standard gun cleaning kit .22LR caliber and 2 for .308winchester 1 balistol spray, 1 classic balistol oil and 1 compartment for other…
Model of the 7.63x25mm Mauser cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale. Use superglue to conect the parts. Casing is made to be ligth and cheap to print, if you want to add…
Update (--> for Breacher & Battle Axe) --------------------------------------------- Silly Shell with 3x airtight Elite barrels 6x Short Darts / 3x Elite Darts / 18 caliber .50 foam balls Update 30.9.2025: Modified shell, suitable for…
Wanted a nice way to store my Hohem mic box and needed to practice 3d modelling so here's to my first model. It keeps the box and the 2 mic covers for windy areas. I might make a version 3 that's a bit higher for a better fit, but this is…
Remixed from the models made by Denwagg - 9 slots was too many for us and 3 wasnt enough for storing minis at events!
LDO 2x2/3x3 JST XH Splicer PCB mount for 2020 extrusion
Gridfinity box for Camera batteries USB Charger (for NP-FZ100 / Alpha Sony batteries in my case)
Gridfinity Element This element is part of the video “1Day1Project”-Gridfinity Table on our YouTube Channel. Feel free to download and use this element. Material: PLA All Gridfinity elements are open source and you are free to copy and…
Gridfinity Element This element is part of the video “1Day1Project”-Gridfinity Table on our YouTube Channel. Feel free to download and use this element. Material: PLA All Gridfinity elements are open source and you are free to copy and…
Gridfinity Element This element is part of the video “1Day1Project”-Gridfinity Table on our YouTube Channel. Feel free to download and use this element. Material: PLA All Gridfinity elements are open source and you are free to copy and…
The bins are 7 mm taller than before (so it's a still a multiple of 7 according to Gridfinity Spec). In addition, I have added a version with deeper slots so that the total height will not change. Those are named differently in the files…
Optimized Translation: WordClock 23x23cm IKEA Ribba Project Required Materials: 23x23cm IKEA Ribba Frame If you test it with the HOVSTA frame, please provide feedback. ESP8266 NodeMCU 114x WS2812B RGB LEDs (60 LEDs/m, self-adhesive) 30AWG…
MA3 Viz Key GF Case A 3x2x6 Gridfinity case specifically designed for the MA Lighting MA3 Viz Key, featuring a TPU insert. shout out moths
Designed this to make the part cooling fan wiring a bit easier. BOM: 3x2 LDO JST XH splitter 2x M3x5x4 heat inserts (from voron BOM) 2x M3x10 BHSC screws 2x M3x8 BHSC screws Print it in ABS/ASA with voron print settings
Fits in an opening no less than 65 mm x 47 mm, deliberately undersized due to the rounded corners of these downspouts. As with all my dividers, these will work better if you (lightly) secure them inside each downspout so they don't get…
Continuing from the excellent work of mkoistinen's remix of bnorick's remix of JamesThePrinter's little bin model, see their works in the origins for some great stuff. This travel case was created for my gridfinity miniature transport…
This gridfinity 3x2x12 container is fully stackable and stores 4 VitaVac (0,06 L) cans.
This gridfinity 3x2x12 container is fully stackable and stores 2 MiniVac (0,12 L) cans.
STEP file Remix from the original step file from respected @Henlor and his mod https://www.printables.com/model/615689-creality-k1-xy-belt-tensioners-upgrade. As mentioned in another remix - 20mm are more common.
This saves you a trip to a hardware store and few cents on the M3x25 screw ;) I really liked the design of the filament cutter, but it required two M3x25 screws which I did not have. These screws were also unavailable in the nearest…
Gridfinity IFIXIT Mako Screwdriver Kit Holder (3x2 base). 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill. I did a filament change to make the text a…
This is a 3x2 beam bracket that allows Lego Technic arms and parts to change 90 degrees. It's useful for building Botball robots when a sensor needs to point down or some part needs to change directions on your model. It can be printed in…
This is a 3x2 beam bracket that allows Lego Technic arms and parts to change 90 degrees. It's useful for building Botball robots when a sensor needs to point down or some part needs to change directions on your model. It can be printed in…
This is a handle for the Convoy 3x21D flashlight that allows single-handed operation and prevents conduction of heat from the flashlight body to the users hand. I strongly recommend using a heat-resistant filament. I used Overture ASA;…
Large Square Bale 6x3x2 - 1:16th Scale Print with fuzzy skin, clip off ears, and torch/heat away marks
Just a simple module for holding mail and papers. I designed the dividers to be 5 layers thick when printing using a 0.4 mm nozzle. Set your wall thickness to 3 in your slicer so that they get printed with 5 solid lines. The dividers…
Thanks to download and ❤. These ice cube trays for the Milwaukee Packout low profile organizers have 6 compartments. [There are a lot more versions of these over at MakerWorld, I will gradually be migrating those designs to Printables.]…
These are feet to raise the printer, they are fixed to the bottom with two M3x20 screws and two T-Nuts per foot. M3 T-Nuts or just normal M3 nuts with a printed adapter can be used.
This was tricky to print due to small bottom surface area but my A1mini handled it quite well. Print directions: print on the flat side turn off wipe print slower turn on Arachne wall generator I also lowered minimum wall width to 60%…
a 3x3 and 2x3 Gridfinity Bin for your headlamp, it works with generic headlamps but was designed with the Nitecore HC68. The 3x3 works great with headlamps with overhead straps, the 2x3 is smaller but can fit the same headlamp if you're…
The bottom hole for the SBT90.2 is 10x11mm, so make sure you place it correctly. PLA not recommended due to 50°C heat deflection temp, starts softening. I use ASA for 100°C HDT, but PETG should be fine for 70°C HDT. Use white colour…
Flat-mount holder for WAGO 221-412 / 413 / 415 connectors – great for securing them to a mounting panel, enclosure, or wall. Available in six versions : 🔸 Standard (angled profile): 3x2 – for 3x 2-wire WAGO 221-412 3x3 – for 3x 3-wire…
The tray is built to hold several 20 x 20 mm magnetic sheet squares as well as a few 30 x 20. They are 2mm thick. I bought a multi-pack for around $6, which had a lot of pieces. The magnet is strong enough to hold screws without being too…
Gridfinity - Metric 19 pcs Drill Bit Set 1mm to 10mm
I couldn't find an existing mount for the connector, so I made my own version. It is not perfect, which is why I added a plate on the back that secures the connector from falling out when inserting the male end. The backplate does not…
Please Check Out all my other Gridfinity Tool Holders here ! :D ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 3x2x3u Gridfinity Socket Storage for: - Harbor Freight QUINN ½ inch drive Sockets and ½ inch extension,…
Use a layer height of 0.1 mm for a more accurate brick dimension
Since most other mounts were a bit overbuilt for my purposes here is my version. The Wago clamps should click into position, if not, clean up the front corners with a knife It's intended to be glued in place, there are plenty of mounts…
I found the gridfinity system like most new 3D printing people and wanted to clean up my cable drawer. Did not find any suitable sizing or looks so ended up designing my own. The bin is a 3 slot design. It is 2 grids wide, 3 grids deep…
A basic tray on top of atucoms flat adapter in 2x3 to store two Multifix adapter including chisels or implements. Unlike others it is unidirectional and can store the Multifix adapter itself either direction.
This is a carrying tray for 50 ml centrifuge tubes, with space for 6 tubes. I use it to collect samples from plants and insects in our garden, which I later inspect under the microscope. As for tube compatibility: each hole has a diameter…
Spacers should be printed in ASA or better for higher heat resistance.
ZASTARALÉ: novejší sbírka je na https://www.printables.com/model/1435653-ramecky-tango Jsem k dispozici pro atypické úpravy rámečků Tango a jiných.
Wanted a 2 bay holder for 24v wires going to the Pi, NiteHawk board, and the controller. I liked the LDO Motors 3x3 vertical holder so I took it and chopped the middle out of it and rejoined the ends.
This is a bin that has a division in it. It is pretty much two 3x1x6 bins glued together but it is one solid bin that can be lifted. It has magnet holes on the bottom, they are 6x2mm round magnets. If you are looking for more gridfinity…
Gridfinity simple four slot knife holder with a cutout for easy grabbing. Designed in Fusion 360 with Gridfinity plugin. F3D file included for modification. Printed in PLA 10% gyroid infill
Purchased some Jumbo Vac bags on Amazon. Couldn't find an adapter, well I designed and made one. https://a.co/d/9Y6o5Eo I had to figure out what threads it used. Weird 23mm x 2mm pitch. I designed 23mm x 2mm pitch threads. Then designed…
This seedling plug tray is designed for efficient plant propagation, available in two compact layouts: 5x2 (10 cells) and 3x2 (6 cells). Each tray features evenly spaced cells that support healthy root development and easy transplanting.…
Card holder for Gridfinity system 3x2 5U Cards size 84x54mm Fingers cutout for pulling out cards easier
Changed to a version that uses **8.3 mm × 2.3 mm magnets**. There is no need to pause the print partway through.
This is a replacement similar to the stock one, on a Grizzly G0513X2BF, as well as a narrow version. Can be printed without supports.
It's a remixed right-block part for Bowden X-Carriage Mount for E3D v6 with 40mm Fan and BLTouch ( https://www.thingiverse.com/thing:3098894 ) by Emphacy. Thanks to him. This remixed part has fixing holes (4 mm diam.) spaced 23 x 23 mm in…
Print resolution: 0,05 Supports: NO Rafts: NO Material: PLA
Picked up some Crickets for my kids on clearance and wanted to make a xCAR for it since it has the power to use one. So I made this little picatinny mounted Combo Faux Holo Sight & DCAR. No hardware is required. 1.75mm Raw filament is…
A 3x2 tubeholder for remia octagon sauce bottles The angled version is a bit smaller so it can be printed on a Bambulab P2S
I originally made this oil funnel for my 10th gen Handa Cevic 1.5t. The m32 x3.5 thread fits on this model ,the m33 x2.8 thread is for the older models.
Great for EDC organization! I've been printing mine with a 0.6mm nozzle at 0.18mm layer height, but really most settings should work. I haven't calibrated flow for text with the larger nozzle because I'm just interested in legibility not…
Philips Ultinon Type N Adapter 11183X2 Material should be at least PETG better ABS, ASA because of the possible temperatures in the light housing. For strong clips the layers should be parallel to the clips. Check the positioning in the…
