Counting matching models…
This is a mockup of the TP4056 USB C Battery Charger Li-ion Module for further case designs sizes and dimensions have been measured carefully If this helped you, please leave a like! That's my reward and payment! 👍 I ll be happy to get…
I recently got hold of a couple of notebook batteries... ... So I needed a battery charge and test setup. I build a charger holder around my battery booklet thing: https://www.thingiverse.com/thing:4113164 This adds a piece for the TP4056…
Protective case designed specifically for the TP4056 charging circuit. Featuring a entry point for USB cable, a dedicated exit for power cables, and a secure pressure fit design. With this circuit things can get quite hot so i designed it…
In case you want to design a part that includes a tp4056 charge controller.
A holder for the TP4056 lithium Battery charging board (25*19mm). UPDATE:2018/10/01 V2 Fits most of TP4056 boards. Fits most of 18650 batteries with protection circuit. Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill:…
This model is compatible with the lego system.
Mounting Plate for the SpeedyBee F405 Wing MINI. Makes It Easier to remove FC by only gluing down Base Plate to Aircraft
Small case for the TP4056 charger with a window for the status LEDs.
A tight-fitting mesh for a Type-C USB 5V 1A 18650 TP4056 Lithium Battery Charger Drop it into your model and the component fits so snugly in the recess that you don't need anything else to keep it in place
This is a Li-ion charger compatible with 18650 and 21700 cells. Charges up to 10 cells. requires a 5v power supply at least 10A. I recommend 15A to avoid overheating. Each cell has its independent charging module TP4056 or TC4056. The…
This is a charging holder for a single 18650 lithium ion battery. It uses the TP4056 charging board, that you can get easy on eBay. (Search for "lithium usb charger" or "TP4056") The battery contacts used are 10x10mm but you can use…
Information SlimeVR is an open source Virtual Reality Body Tracker project. I designed this case to house some components following the SlimeVR schematics. This is my first time making a case to fit a bunch of components and the first…
I wanted a light and compact way to mount the SpeedyBee F405 Wing Mini flight controller on my arrow shaft Slowstick bi-plane. There are two different orientations you can assemble the flight controller, standard and custom. Depending on…
This is work in progress next update will be adding an NTC for more safety. Edited 19-12-2022 : added a little how to and some Data, Features & Technical Specs After multiple prints and test I finally came with a design that I'm satisfied…
I was looking for a mount for the SpeedyBee Wing, but I couldn't find one that integrated the GPS antenna and the RC receiver. So I drew my own.
This is a mount which offers a couple of ways of securely holding the SBF405 Wing. I don't like attaching flight controllers to airplanes with just velcro/hook and loop because they are never securely held in place and the FC can sense…
plate with holes for mounting fc in airplace
This is a vase mode print I designed to hold 2 18650 cells as well as a TP4056 charge/protection circuit & MT3608 DC-DC boost circuit. Here's the link to where I bought the circuits from. https://a.aliexpress.com/_mNJGjrV 0.2mm layer…
My own design for a Meshtastic/Meshcore Heltec V3 walkie-textie that also holds a power switch, 18650 Li-Ion cell, & TP4056 charge controller. As a bonus, everything is held together by a single M3x10 pan head screw. Bluetooth/Wifi For…
Added strain relief feature to the original design. The case is longer to accommodate zip-tie, but it's pretty minimal (4mm longer). Need re-orientation, but can print without any supports. Printing filament: Original designer called for…
BASIC MODEL: TP4056 USB - C Lithium Charge Module
I used PETG, 15 % infill, 0.2 Quality Standard. M3 + nuts. Print with support. F405 and GPS were getting hot, so I left holes and space for air to flow. 4 x M3x8 + nuts 2 x M3x8 + nuts
Spare maintenance tool to open body on Husqvarna Automover 305. Tho tool has a protruded edge at the back to allow easier removal from its space. When the tool is inserted into its space the distance should be facing downward.
designed mockup model of TP4056 USB-C charging module for representation in bigger assembly
Since I did not find a suitable bracket which was sturdy enough and did not interfere with the wiring, i designed my own. It can be printed without supports. The top plate has an opening for the build-in LED light and a few cutouts in the…
About Quick and ugly remix to allow charging 18650 via HW-373 TP4056 USB-C module, which has larger diameters. The external dimensions are the same. Lithium Battery Charger Li-ion Module TP4056 USB C mock up was used to alter original N…
This item can be inserted into the Shimano Tiagra RS405 hydraulic brake calipers to secure the brake pistons against accidental actuation of the brake lever when the wheel with the brake-disc is removed from the bike. Such actuation might…
Oy! I was looking for a Sorting tray to sort out all my Mtg cards without taking too much space, I found one for catan cards and went to work. •I design the model to accommodate cards without sleeves, its a perfect fit for those! But I…
The Anbernic RG405M is a retro handheld emulation game console that runs on Android. It's design and shape allows for a case that be used on the front or back of the device, allowing the case to be used as a grip case or a protective…
simple mount for screwing down a wing fc
Wall mount for DeWalt DCG405 and DCG406 angle grinder. On this grinder the guard is 35mm thick, and it's really close to the body and the handle. The mount is designed with two slots (left and right) to give some space for the handle. It…
Simple TP4056 Housing. Created in FreeCAD. Ender 3 v2, Generic PLA, 0.4mm nozzle, 0.2mm Layer height.
Why charge one 18650 when you can charge up to 4 at a time! It just takes 4x as long of course. This also has a slight extension on the space available for the 4056 circuit, as the original design didn't fit the ones I have (which have a…
I designed this stand for my Anbernic RG405V but I do believe this would work universally for any Gameboy styled handheld retro gaming device or cell phone. It also includes a cut out for a power cord to come up through the bottom. It was…
Have used PLA. You can use sand paper on top of rail if wanted. My mission was to create easy to use and build train rails. Save filament Fast print Make lots of track quickly Play and have fun Found out you need to dismount double boogie…
Simple mount for the F405-Wing Flight Controller. I found several designs, but in my opinion they were all to clumsy and big. This one is tiny and the FC removes towards the top, so also useful in tiny flying wings. I created 2 versions,…
bottom plate meant to be glued to the base of your wing in some way. I have used 5 dots of hot glue. 4x m3x4.2 insert nuts needed 4x M3 6mm screw needed
Remixed this excellent F405 Wing mounting for use in my Flightory Stallion build.
Remixed from the awesome fidget by Thorin Oakenshield. We added Team 4405 Atom's Family logo and team number to frame. The gear is the same as source model.
A little helpful file for making cases to hold either; Wemos LOLIN D1 mini V4 TP4056 BMI160 Holds these parts loosely. Handy for making a case for SlimeVR Open Source VR Trackers - Github - Docs - Schematics Option for my first test in…
Unfortunately the original box shows signs of dissolution after ~28 years. Although the circle has been in the drawer for easily 15 years now. But the compass itself is still a very good device and my son needs one at his new school.…
For my flashlights 14500 battery I needed a charger fitting the protected version of a TP4056 because those I had laying around. So i grabbed the AA charger holder from enif and designed a holder for the charger board in Fusion360,…
Here's a Gridfinity 2x5 holder for the Klein Tools 34056 Hex Ferrule Crimper. I've also included a 2x5 5 bin Gridfinity for either standalone use or for use with the 5x4 Gridfinity Storage Box by Pred (…
3D printable mount for a SpeedyBee F405 Wing Mount. Also includes optional top mount for M100 GPS module. Required: M3 Inserts 5mm diameter M3 Screws. ~5mm without GPS and ~10mm with GPS mount.
Designed two versions: Called The Easiest- just attach fc to the mount with m2 screws, and glue in the mount to the wing or screw it with m3 screws (30x30mm) Called Slide In- slide fc in the mount, than screw it up with m2 screws. You can…
Simple holder for charging 18650 batteries in original battery holder and TP4056. Be careful when pressing down the battery holder so that the cables doesn't get squeezed. The chip I use have the positive pad on the left side, please…
Print with 3 walls and 2 top/bottom layers. Supports shouldn't be necessary. I printed the "SPEEDYBEE F405 MOUNT" in PETG but PLA should also work fine. The "GPS_MOUNT" should be printed in TPU but i haven't tried any other material. If…
meshtastic heltec v2 battery case with two 18650 , back parte compatile with a famous heltec v3 case look like in photos
Do krabičky se zacvakne modul a zdířky zašroubují, vrchní krytka se zacvakne. Gcode je udělaný na všechny díly, tedy obsahuje oba dva typy krytu. Kryt bez dírky je pro kompletní uzavření, ten s dírkou je tam proto, aby bylo vidět dovnitř…
This is a replacement part for Saab 900s. This part is located at the bottom of the door card and helps secure it to the metal door. Outer diameter is 20.5mm with the inner diameter of 8.5 chamfered down to 5mm. The washer itself is 3mm…
Saw this video on Youtube before I got a printer, decided to make a more compact version. https://www.youtube.com/watch?v=bRGt_Fh9CVA&t=588s Wiring design is the same. I bought the TP4056 & ZB2L3 on Amazon, I am not recommending any…
lego 4215 59349 23405 98280 30022 87421 47847 6082 64453 65735
The model is remixed from other models with some improvements from my side. I used M2x5mm to fix the FC to the support. It should work with matek F411 as well.
This model is compatible with the lego system.
Simple FC mount with a locking tab. The holes for scrwe are 3mm
lego 4215 73878 23405 60601 38320 51266 60593 51239 60594 60598 60607 60608 60614
Another LiIon Charger case. Biggest problem for me was until now, that good cotact to the LiIon battery was mostly poor. PLA is pretty brittle and not a good material for spring loads. So I decided to create a steel spring load with M4…
Just mirror the construction if you have the usb placed on the right side instead of left side. I print mine in yellow PETG.
This is a protective hard case for the Testo 405i anemometer (measures air velocity). It is a hot-wire anemometer so it is very delicate, and it did not come with a case, so I designed one for it in two parts - a case and a lid. The lid…
This part replaces original plywood top tray in Volantex Phoenix RC glider to serve as a replacement and offer attachment for SpeedyBee F405 Wing Mini Flight controller, its Wi-Fi module, HGLRC M100-5883 GPS and XT-60 socket. Print with…
Software and assembly video here: Case is ideally held together by either melting with a soldering iron or just using glue. Electronics Used (Including Purchase Links) WeAct Studio STM32 Core (STM32F405RGT6):…
A simple case for 3x 18650 Batteries TP4056 charge module and a LM2596s DC-DC Step-Down converter. The top can be fixed with M3 x 8 screws
If you, like me, have too many TP4056 charger modules, and want to organize them using Gridfinity. I've got the perfect thing for you! The magnet holes are 6.09mm, so you only need to press them in to the holes. No glue required. I also…
Lego 3027 3028 3033 3036 3456 41539 92438 91405
Microsoft KC-0405 Digital Media Pro Keyboard (discontinued) back foot/elevator/riser. This is a replacement design that is more durable than the original foot. The keyboard is no longer produced, but mine still worked (except for the…
Evinrude Johnson 0322405 Electric Choke - CLEVIS, Plunger to lever Purchase at https://www.ebay.com/itm/133667880716
Speedy Bee F405WingApp Case with built in BZ-251 gps module holder. Print the gps holder out of tpu. The rest can be out of whatever you like. You will need 8 m3x4 and 4 m3x6. It requires to xt60 connectors with the grey wire covers on…
This model provides a small and effective box for TP4056 charger module. The box is useful, as shown in the images, the box has some space for cables on the back, collected in a single hole, in example when a JST or similar connector is…
This enclosure is optimized to securely and compactly house the TP4056 charging module. The structure includes a stable base and side walls that snugly fit the board’s dimensions, preventing unwanted movement. It features precise cutouts…
2 Parts Mounting Adpater for F405Wing Print in PLA - PETG Quick to print - I used 25% Infill Hardware Needed 2 M3 <20mm Screws 4 M3 Nuts 4 M2 ~4/6mm Screws ~ 10g of PLA
This is a slim snap case for an RG405M to help it travel better inside a bag. It's intended to re-use the original packaging foam piece to protect the front face. Place the RG405m in the case, place the foam piece on top and apply a…
This is a 3D printable replacement Stopfer (pusher/plunger) designed specifically for the Bosch MUM 4405 food processor. If your original pusher is lost or damaged, this model provides a functional and snug-fitting alternative to keep…
The battery cover of the "Sommer 4050" (Model No. T397-40) door remote can be removed quite easily (without meaning to) by pulling it out or sliding it into pants pockets etc. and by doing so, it is quite easily lost. As there seems to be…
Case housing ESP32, 128x32 OLED screen, TP4056 on top of ESP32 and a 1500 mAh Li-Po battery below everything.
BOM: Tp4056 type-C charger (for example https://pl.aliexpress.com/item/32930640893.html?) 1x4 2.54 male gold pin connector (remove two outside pins) 18650 batttery spring plate (i found them locally, they need to be 18 mm wide, they are…
This Part failed on my Machine so I decided to Construct and Print it my self. Here is now the result. I printed it with my Resin Printer, I don't know if a FDM print will work. Please share your experience.
The Fluffy Brush part that is keeping the rotating cylinder brush broke. Searched all over Printables and other sites, but I was unable to find an already built one. I tried my best to recreate it, so I ended up with 4 pieces, as printing…
Could get the outer diameter from Ø208mm to Ø222mm. This means a 7mm raise. Two issues to be mentioned: a) The diameter is limited because of the wheel housing (fender) and b) go not too high otherwise the charging won't work. I will…
This is a TP4056 based 20 cell charger which is to be used with a 5V 20A SMPS (for all modules charging at 1A current)
This is a secure mount for the SpeedyBee F405 Wing Mini FC. It locks it in place in all directions without gaps. Use an M3 tap to make threads. The Upper part can be split into parts and printed in different colors with an arrow symbol.…
Subaru Forester SJ Cover Catcher Subaru OEM PNs: 94053AL100; 94053FJ000 Print inclined with organic supports, using the print post in the model itself. This reduces supports and keeps visible surfaces clean of support remains. Print post…
This modification of the Gameboy Advance SP battery cover incorporates a Type-C TP4056 charger module, allowing for enhanced functionality. Inspired by Makho's original design (available here ), this mod offers a sleek solution for…
Wall mount pieces for Lego set 40591 Death Star 2 1-piece set to wall mount Death Star with parts from its included stand. Print WallMount piece with the large hole in the cylindrical piece facing upwards. Supports may be required for the…
Parts for geometrical benchmarking/ torture testing you printer according to VDI Standard 3405 3.2 Referenzbauteile zum Prüfen von Merkmalen 3D-gedruckter Teile in Anlehnung an die VDI-Richtlinie 3405 Blatt 3.2
Small case designed with the STM32F405 feather board in mind. It has a button for the reset switch and a slot in the rear for memory card access. No provision for LiPo battery connector or I2C (yet). Also tested and working with Bluefruit…
Battery pack, that fits two vape cells in parallel + TP4056 module. ADJUST THE CHARGE CURRENT RESISTOR ON TP4056! Should be printed from temperature resistant filament to handle soldering (of the contacts and on the tp4056 board). I used…
Original design by Daniel: https://www.printables.com/model/1000753-f405-wing-supportgps-speedybee I modified this great design because I had some personal desires, so a big thanks to Daniel for sharing the original cad/step files (every…
Here is a charger for CRC123A/RC123A batteries, using a TP4056 charging module. I'd printed other models but found them too tight to place/remove the cells, so I designed this, giving more clearance and using springs salvaged from an…
This compact model houses a TP4056 charge model with space for a disposable vape battery at the back. Perfect for running LED fairy lights where unregulated output is fine. It can house a round vape battery, about 16mm X 16mm X 38mm.
Software and assembly video here: Case is ideally held together with 15mm M3 self tapping screws. Electronics Used (Including Purchase Links) Waveshare Core405r: https://www.waveshare.com/core405r.htm Waveshare 2.42' SSD1309 SPI OLED:…
This is a box-shaped case for using the speedybee f405wing FC on a fixed wing.
This is a replacement for the laser shutter arm on HP Laserjet 4000/4050/4100 and possibly the Laserjet 5000. The equivalent HP part number is RB1-8700-000CN. This is a 23 year old printer (2000) so generally only used parts are…
This internal frame to hold in place the MT3608 Voltage Regulator and a TP4056 Battery Charger along with a 3.7v 500mAh Lithium Battery inside the DSO150, is designed to fulfill my upgrade needs and I hope is useful to someone else, the…
This fan shroud is optimised for use on the Prinrbot Simple 1405 with an E3D v6 Hotend. In theory it also works with the Ubis, however I can not guarantee, that it lines up correctly. There is a normal version (redone) available that…
Das Modell ist dem SKYON Plastikbeschlag 2405/2406 nachempfunden. Das originale Teil war gebrochen und ich habe es per TinkerCAD nachempfunden (daher nur STL exportieren können). Ich habe zunächst einen PLA Druck gemacht (siehe Fotos) und…
Just longer version of the oryginal allowing to be unscrewed while the servo connectors are horizontally mounted. All credits go to https://www.printables.com/model/1094850-speedybee-f405-wing-mini-bottom-plate. Works great and simply…
