Search results: 4p

Counting matching models…

Printables

4Legs4Pets Pet Cot Plugs

Recommend you use PETG if the cot will be exposed to sunlight. Also recommend you print 1 plug and test fitment prior to printing the remainder. They should be a press fit and not easily fall out.

Order a print of this model

Printables

KV4P Backplate and Magsafe Backplate

A basic backplate and a magsafe backplate for the KV4P project (https://kv4p.com/). Use a magsafe sticker like https://www.amazon.com/gp/product/B09DFB9733 for the magsafe backplate.

Order a print of this model

Printables

Neptune 4/4Pro Bed Alignment + cable chain Support+ kubsa

requires 4 m3 heated inserts (2 to mount the kubsa and 2 to mount it to the bed) make sure to print in petg or better make sure you set this as the y axis inputshaper I will update if the orentation of the kubsa ends up causing errors

Order a print of this model

Printables

Neptune 4/4pro X-Axis Double Shear & Motor Upgrade

For whom is this for? N4 or 4Pro owner that either wish to use 3rd Party Motors - those have longer shafts which does collide with limit switch. Or those who want to add Doubleshear with either stock motor or 3rd Party Motor. What to…

Order a print of this model

Printables

4pin 12V PWM PC fan controller box/case

Nozzle: 0.4mm Layer height: 0.2mm Infill: 100% Perimeters: 3 Supports: no 50x19mm board: 12V PWM 4 Wire Temperature Speed Controller Governor Module Temperature RPM LED Display Cooling Fan Control Switch (3P Plug Cable):…

Order a print of this model

Printables

JENO3 O4PRO CAMERA TPU

Fichier expérimental pas encore testé Remix d'un fichier de "callmelue" j'attends la publication de son modèle pour le mettre en remix

Order a print of this model

Printables

GoFlyO4Pro - FPV Drone Frame for DJI O4 Pro - 3, 3.5, and 4 Inch / sub 250g

Das GoFlyPro Frame wurde weiterentwickelt um die DJI O4 Pro und das Walksnail Moonlight Kit einzubauen. Es werden hier nur die benötigten Dateien für die GoFlyO4Pro Drohne hochgeladen. Es ist sozusagen einfach nur ein Upgrade und baut auf…

Order a print of this model

Printables

Stranger Things Kinder Joy Stand 24pcs+Mindflayer

UPDATE: Complete with Mindflyer and 2 figure stands. A 22-piece stand for the popular Stranger Things figures, with the logo in the middle.A 22-piece stand for the popular Stranger Things figures, with the logo in the middle. PLA 0.2…

Order a print of this model

Printables

ESP32 24PIN TERMINAL ADAPTER HOLDER for DIN

Order a print of this model

Printables

Fixed and pre-cut base for Stranger Things Kinder Joy Stand 24pcs

Print this base and use logo and mindflayer models from the original model. Changes in this base relative to the original: Added a chamfer to the lip that holds the logo in place, so that it can be printed without supports Sliced the…

Order a print of this model

Printables

MAKITA 4PACK Carry 18V

Carry 4 of MAkita 18V ACCU

Order a print of this model

Printables

Elegoo N4P PEI plate clip

This is an accessory for the Elegoo Neptune 4 Plus printer. Maybe suitable for other similar Elegoo printers too. If you have ever experienced warping of your workpiece during printing, but the adhesive was so strong that the workpiece…

Order a print of this model

Printables

N4/4pro Y-Axis Double Shear Generic Motor Mod

Original Printable BOM and instructions apply Motor screws 1x M3x8mm replaces 1x M3x5mm The 3x M3x40 are used. Part B was modified to recess them deeper in the Part Requirements Motor cannot be longer then 48mm shaft needs to have a…

Order a print of this model

Printables

N4/N4pro bed aligner, with wiper and Mellow Fly ADXL345

I didn't find any models here with support for both Mellow Fly ADXL345 and A1 nozzle wiper, so I made one. The model is a remix of @Joushou's bed plate aligner. Model modified in Autodesk Fusion. When printing , it does need support just…

Order a print of this model

Printables

Dice4print

Printed Dice Making good dice on a 3D printer is not straightforward. Simply printing a cubic shape is easy but such a die is highly likely to be biased and some faces to look poor because of highly directional way that printers work.…

Order a print of this model

Printables

Qidi X-Plus3 BTT Manta M4P adapter bracket

My stock control board got zapped, had a Manta M4P lying around and did not want to pay $200 for a new board. I will upload printer config files and guide once I fully finish the conversion. Should be compatible with the X-Max3 and…

Order a print of this model

Printables

Adaptive heat bed + adaptive mesh (Neptune4Pro)

Enter the code in the section dedicated to the machine's initial g-code ;ELEGOO NEPTUNE 4 PRO M220 S100 ;Set the feed speed to 100% M221 S100 ;Set the flow rate to 100% M104 S140 ; heat the nozzle to 140°C without waiting M140…

Order a print of this model

Printables

ATORCH DL24 DL24P Discharge Electronic Load Case Wall Mount Accessory

I wanted a quick and dirty way to mount my A-Torch tester on the wall. I had already printed a great case for it. Firstly tried double sided tape but the heat of the unit softened the double sided tape and made it fall off. I used 6G…

Order a print of this model

Printables

XTAR L4pro charger wall mount holder.3mf

I made the print using PETG and 0.4 nozzle Either screw in the holder first or clip in the charger and screw in the holder into the wall (the charger has a good hole). Designed the gap between the charger and the wall, because I assume…

Order a print of this model

Printables

Cerniera per box doccia R04PET

Cerniera di ricambio per box doccia compatibile con sistema Novellini R04PET. Questo componente è progettato per il ripristino o la sostituzione delle cerniere originali nei box doccia e sopravasca delle serie Aurora e Peter. Il modello…

Order a print of this model

Printables

Elegoo Neptune 4/4Pro HULA Anti Vibration Feet: Center core + Feet

Quick and easy HULA Anti Vibration Feet Adapter for Elegoo Neptune 4/4Pro. Simply remove the original foot of the Elegoo Neptune 4/4Pro and mount the adapter foot. Afterwards, the modified center core can be connected to the rest of the…

Order a print of this model

Printables

4pcs sea creatures Wall Decor

Order a print of this model

Printables

Nema 17 plug holder 4pin JST SM2,54mm 22AWG

Ich habe hier einen Stecker halter konstruiert der einen JST SM2,54 Stecker am Nema17 festhält damit dieser beim Bewegen des Motors nicht die Kabel beschädigt. Dies war eine der ersten Ursachen für den kleinen Umbau. Später erwies es sich…

Order a print of this model

Printables

4Legs4Pets Pet Cot Plugs

Recommend you use PETG if the cot will be exposed to sunlight. Also recommend you print 1 plug and test fitment prior to printing the remainder. They should be a press fit and not easily fall out.

Order a print of this model

Printables

Halloween Keychain Set 4pcs

Follow me on Instagram ❤ Facebook ❤ TikTok ❤ Telegram ❤ Patreon ❤ Pinterest ❤ just another halloweek keychain set 😇 all the keychain are reversed printed for higher quality (main face of the keychain is on the print plate). Powered by…

Order a print of this model

Printables

Pivoting Enclosure for ZEEWEII-154Pro Oscilloscope

The ZEEWEII 154Pro oscilloscope is a nice inexpensive single channel oscilloscope. Its downside is that it is an open frame assemble. This enclosure gives it more protection but also gives it a stand to allow pivoting for better viewing…

Order a print of this model

Printables

Enderwire BigTreeTech M4P mount / Fysect U2C can mount / 8010 fan mount

This is a mount for the M4P in the Switchwire. It's REALLY tight. You need 90º USB adapters to use the USB ports on the M4P, but this blocks the Ethernet port. Installation: I also added a mount for an 8010 fan to cool the steppers, this…

Order a print of this model

Printables

Marantz remote RC004PM mount

Small wall mount for the Marantz remote RC004PM (in my case for the PM7000N) and other.

Order a print of this model

Printables

Elegoo Neptune 4pro Reverse Bowden tube

you need: 1_ m3x16 1_ pc4-m10 print settings: infill: 25% or more You can print it in pla, but abs or petg is more durable

Order a print of this model

Printables

Desiccant canister M4P and Prusament

I primarily use filament from Prusament and Material4Print at home. The desiccant containers I’ve used so far usually didn’t fit well, making it impossible to store the spools in their original boxes. When I saw the model by kennyd1gital…

Order a print of this model

Printables

Neptune 4/4Pro Screw Mounted Bed Alignment with Cable Chain Support

I've made some small changes for myself.

Order a print of this model

Printables

3S4P (12V) 18650 Li-Ion battery pack for bike

*12 18650 Li-ion battery *BMS 12V *XT60 Stecker/Buchse

Order a print of this model

Printables

BTT Manta M4P mount for Ender3 NG1.2

Bigtreetech Manta M4P mount on din rails for the Ender 3 NG 1.2 printer. Make use of the standard din rail mounts available in the Ender 3 NG project. It uses M3 screws, without brass insert, directly screwed into the plastic.

Order a print of this model

Printables

Futaba T4PM Plus hard case inserts

I wanted a hard carry case for my Futaba T4PM Plus radio transmitter but could not find one I liked. So I found a hard case at Harbor Freight called the Apache 2800 and designed some ASA and TPU inserts to convert it into the carry case I…

Order a print of this model

Printables

4pi model

Fairly acurate model of a 4pi reprap controller. Now centered. Print instructions Category: 3D Printer Parts Instructions Positional information and sizes extracted from the eagle brd file. The fuse is optional, selectable in the scad file

Order a print of this model

Printables

4pi box and mount for I3 Single Sheet Frame

Allow you to use your 4pi board on a Single Sheat Frame Prusa I3. Mount screws into the ramps holes. New version, fixed issues with: Hex nut holes. USB cutout. Print instructions Category: 3D Printer Parts

Order a print of this model

Printables

KV4P HT project case

Working on the KV4P HT project. Go check it out!! https://www.kv4p.com/index.html Used PLA+ on an AnyCubic Cobra2. Added a brim and flipped it on to the broad side to provide a stable print base. No supports needed.

Order a print of this model

Printables

Neptune4Plus | QuickToolChanger H2V2S Remix V2

I redesign & remix again to ditch Elegoo Toolboard and use BTT EBB42 Toolboard. Version 1 files can refer to this link: https://www.printables.com/model/936634-neptune4plus-quicktoolchanger-h2v2s-remix-v1 Step 1 Please print out:…

Order a print of this model

Printables

Makerfire 4pcs Hex Nut Drivers Holder

Holder for Makerfire 4pcs Hex Nut Drivers set. Updated for better fit.

Order a print of this model

Printables

FFBeast Slip Ring 4Pin (USB)

Require: 8mm hole in shaft/24mm hole in motor 14mm Hub Spacer (Bigger, will only require new Magnet holder) MT6701 Encoder (15mm x 18mm) 4 Copper rings (10,5x13,8x0,85. 16,7x20x1,35. 22,4x26,8x1,35. 30,5x35,8x1,75) 4 Pen springs (Cut in…

Order a print of this model

Printables

Side-Feed Filament Guide UBBI for Neptune 4/4pro

Remix of side-feed filament guide using SilencedFrost's UBBI

Order a print of this model

Printables

KV4P Backplate and Magsafe Backplate

A basic backplate and a magsafe backplate for the KV4P project (https://kv4p.com/). Use a magsafe sticker like https://www.amazon.com/gp/product/B09DFB9733 for the magsafe backplate.

Order a print of this model

Printables

Conector HAE 4Pine

Más Diseños en Cults3D: https://cults3d.com/es/colecciones-de-dise%C3%B1os/kique75/electron GrabCad: https://grabcad.com/enrique.chavez-21

Order a print of this model

Printables

RAM Slot Clip for ASUS P4P800

This is a DDR RAM slot clip specifically designed for the ASUS P4P800 motherboard. I got this board for a vintage gaming build but it had a missing clip on the of the RAM slots. I have also included the CAD file so this can be modified…

Order a print of this model

Printables

Das Keyboard 4Pro Raiser

Loved the original raiser(ruler) but I like my keyboard higher, so there is the thing. Category: DIY

Order a print of this model

Printables

BTT Manta M4P for Sovol SV06 and SV06 Plus on Steroids

Electronics Enclosure for Sovol SV06/SV06 Plus Upgrade your Sovol SV06 or SV06 Plus with this custom electronics enclosure, designed for the BTT Manta M4P . This compact enclosure replaces the stock housing while using the original hinges…

Order a print of this model

Printables

Cover for iPhone 14/14Pro/14pro max

Good morning, Welcome to my profile, full of models and miniatures :-) I have for you covers for Iphone 14 / 14 Pro / 14 Pro Max. They are beautiful and practical. At first glance they will amaze you with their design. Printed without…

Order a print of this model

Printables

base para 2 filamentos-neptune 4 y 4pro

fácil armado y fácil funcionamiento, capacitad máxima de 2 carretes de filamentos

Order a print of this model

Printables

Neptune 4/4Pro Bed Alignment + cable chain Support+ kubsa

Order a print of this model

Printables

Phanteks PH-TC14PE AM4 Mounting

If you bought this cooler before AM4 was invented, these 2 parts are the solution, to be able to mount on an AM4 motherboard. Reuse 4 screws from coolers AMD kit, and add 2 M3x16mm screws and 2 locknuts. Printed in PETG 100% filling, and…

Order a print of this model

Printables

4pi Spin-½ Symmetry Demonstrator Anti-Twister Mechanism

4π Spin-½ Rotation Symmetry Demonstration – A Mechanical Model In our everyday world, a thing that rotates one full circle — corresponding to the number 2π, marking the circumference of the unit circle — is back to where it started. But…

Order a print of this model

Printables

Rotating filament holder for Neptune 4/4pro printer.

Rotating filament spool holder for Neptune 4/4pro printer. Suitable for spools with inner bore diameter 35-75 mm and width up to 85 mm. To make it you need: bearing 608 - 2 pcs, nuts m8 - 3 pcs, washer m8 - 2 pcs, stud m8 135 mm long.…

Order a print of this model

Printables

KV4P-HT v2.0c Case

KV4P-HT v2.0c Case Printable case for the KV4P-HT no supports required. Should be an easy print on even the worst tuned printers and its setup for multi material with the logo on the down side. If the antenna touches the case it will be…

Order a print of this model

Printables

N4Plus Voron SB + Biqu H2V2X Extruder + BTT EBB42 Toolboard + ElegooOriProbe

N4Plus-VoronSB-H2V2X-Mount-Remix v1 Hardware needed: 1) Cap Screw M3x6 - 4pcs (for MGN12H Linear Rail Block) 2) Heat Threaded Insert M3x5x4 - 4pcs (for Voron Toolhead) 3) Timing Belt GT2 LL-2GT width 6mm Print Setting Perimeter: 3…

Order a print of this model

Printables

Elegoo Neptune 4Pro Controller stand

My design is to move the controller touchscreen onto my desk. I am left handed. My printer is on my right. It is nice and stable and add a couple of nuts to the supplied bolts and there we go. the bolts can actually reverse to maybe look…

Order a print of this model

Printables

Rugged Weather Proof Case for Sonoff SNZB-04P Door/Window Sensor

It can be printed with 0.2mm layer height and with no supports, no need to rotate the models. Remove both the sensor and magnet from their original cases. Keep the screws holding the sensor PCB to the case as they will be used later. Push…

Order a print of this model

Printables

Neptune 4Pro C270 webcam mount

Webcam mount for 3d printer Elegoo Neptune 4Pro

Order a print of this model

Printables

MiSTer N64 SNAC 4P Case

A friendly heads-up: This case was a snug fit for my PCB, but please be aware that not all boards are manufactured with the same dimensions. The one I used was slightly off-center, so your mileage may vary. Also, keep in mind that the…

Order a print of this model

Printables

Mintion Beagle Cam V2 camera mount Elegoo Neptune 4Pro

Shorter version of https://www.printables.com/model/679978-mintion-beagle-cam-v2-camera-mount-elegoo-neptune

Order a print of this model

Printables

Webcam support for Neptune 4 PRO N4P - Remix from @Bernd_1253881

2 walls 15% infill supports i recommend tree(organic) supports print them as they are shown in the second picture POV in the third picture

Order a print of this model

Printables

18650, 21700 or 26650 Batteries Holder - 12 pieces (3S4P or 4S3P)

This one was designed to replace an ordinary 7A Pb battery in a PC UPC. Now: it holds much higher discharge current; has at least twice bigger capacity; you may charge these LiFePo4 setup with 15A current instead of Pb 0.7A; has less…

Order a print of this model

Printables

Filament sensor mounting screw Neptune 4 / 4pro

m3 screw for fixing the filament sensor, analog of the standard screw (original lost). Print with 0.10-0.16 layer, 100% fill, apply XY compensation for accurate sizing. Lasts about 5 screws, may need a new one.

Order a print of this model

Printables

filament presence sensor mount Neptune 4 / 4pro

Крепление датчика нити позволяет закрепить его в обычном месте, сохраняя при этом его мобильность. Дополнительно вам понадобится винт M3 или стандартный винт.

Order a print of this model

Printables

Pavo 20 Pro - O4Pro Edition - Boite de Transport

Une boite de transport pour votre Pavo 20 Pro, monté avec un DJI O4 (Pro bien entendu…) Peut contenir : 1 Pavo 20 Pro, avec son O4 et ses antennes stock (qui prennent une place…) 6 LiPo 3S (4 fines type Lava, 2 épaisses style DogCom) 1…

Order a print of this model

Printables

FPVERA 7pcs/4pcs Hex Bit Driver Kit - Wall Mount Holder

I bought the set off Amazon: https://a.co/d/gRFesgV I saw there are other sets that look exactly the same by different sellers, they should also work, but are not tested. They are often sold under “RC Hex Driver Set”, and I have seen a 4…

Order a print of this model

Printables

KV4P Sliding Case with Phone Holder

Purchased a KV4P off of Aliexpress. The standard U-shaped USB connector doesn't work with most cases, so I purchased this one: https://a.co/d/dgE0EBR I didn't want to use a sticky gel pad, so modded the slide case with a rubber band phone…

Order a print of this model

Printables

13S4P 21700 - 48V 20ah Battery Tray

13S4P 21700 - 48V 20ah Battery Tray - compatible with 2P Strips

Order a print of this model

Printables

4pcs Sea Creatures Decorative Magnets

Nice decorative refrigerator/file cabinet/workspace magnets! Easy print and easy color change. Made them about the size of the palm of a hand and thicker to support magnets being inserted and used as a background to the original design.…

Order a print of this model

Printables

4prong hook

Simple 4prong hook, prints flat.

Order a print of this model

Printables

USB 3.1 Type C 24Pin Female

I couldn't find a 3d model of this anywhere, so I whipped one up. You can find this USB-C port here. (affiliate link)

Order a print of this model

Printables

Neptune 4/4pro Y-Axis Double Shear 9mm Belt Upgrade

For whom is this for? Its for Madmans thinking one day the N4 could be an LH-Stinger - it cant - but we try anyways! This Mod is for N4 or 4Pro owners that seek for more power overall on the Y Axis which means higher recommended accel,…

Order a print of this model

Printables

Layer.Shifted cable chain system - 4Pro Mount

print on the largest flat part, cable chain adaptor up will need 2 - M3 x 16 button head screws to mount. Mount to the wheels side of the carriage, where the old take off mounted. 2 versions, depending on how you want to clear your chain.…

Order a print of this model

Printables

Low profile bracket/baffle for BCM5719-4P nic in a Lenovo ThinkCentre M920q

This is a low profile bracket/baffle for a Broadcom BCM5719-4P - 4 x 1GbE PCIe NIC (for example the BCM95719A1904G) to be used in a Lenovo ThinkCentre M920q tiny PC. Remove the card's original bracket and use a small-head screw from the…

Order a print of this model

Printables

BMAX-B4Plus Finder Dovetail Holder and cable management

I have create a finder dovetail holder for a Bmax-B4 plus. This model include a cable management solution.

Order a print of this model

Printables

ELEGOO_NEPTUNE_4PLUS

I designed and created an extruder gear pusher, focusing on durability, efficiency, and precision. After testing and evaluating, I made several optimizations to improve its performance. These included refining the pusher profile for…

Order a print of this model

Printables

Neptune 4/4pro X-Axis Double Shear & Motor Upgrade

Order a print of this model

Printables

Neptune 4/4Pro LH Stinger Bed Carriage

Disclaimer untested Mod. Dont have the carriage myself. Cant build it to check if this is even worth it. There is no install instructions or anything also because of that fact. Since i dont know when or if i will upgrade to it i release…

Order a print of this model

Printables

6S4P honeycomb 21700 3 row design 22.2V battery

This is a 6S4P honeycomb 21700 3 row design 22.2V battery. This design has a base for hold the copper in each corner and a solid base to keep it in place. Is a honeycomb design to keep it slim in 3 row only.

Order a print of this model

Printables

15s4p Cellholder 18,8 Cell Diameter in Xiaomi Pro2 0.4mm Nozzle PETG

Printed with 0,4mm Nozzle PETG

Order a print of this model

Printables

Cat Ears for Elegoo Neptune 4 / 4Pro

I modified the modell from @Minkas_ to fit on the Elegoo Neptune 4 and 4Pro. I would recommend printing it on the front side with support. To atach them you can use the existing srews.

Order a print of this model

Printables

Neptune 4/4pro X-Axis Double Shear & Motor Upgrade for generic limit switch

Assembly: desolder connector from generic limit switch (https://www.aliexpress.com/item/1005004881361555.html) narrow bent pins solder from underneath (maintain the position of the cap!) screw in… BOM is the same like Lamarc's, only…

Order a print of this model

Printables

BTT SFS 2.0 for LS Fanmod for Neptune 4Plus, Neptune 4Max

Changed connector on the meganever2 BTT SFS mount to SilencedFrost UBBI connector. The mesh looks bad, because I had to remesh it, but it's printable and it works perfectly. Print - Related Settings →…

Order a print of this model

Printables

Quadlock KV4P HT Case

You will need to print the first main part of the case from the STL I remixed (Link below). Then you can print this quadlock backer.

Order a print of this model

Printables

DL24P 180w carcasa

Usar las instrucciones de la versión original de mi remix.

Order a print of this model

Printables

ADVENTURER 4PRO TOOLS

ADVENTURER 4PRO TOOLS - SENCILLO NO NECESITA SOPORTES

Order a print of this model

Printables

4pin 12V PWM PC fan controller box/case

Order a print of this model

Printables

Connector housing Dupont 4Pin 12mm

Connector housing Dupont 4Pin 12mm Find out everything you need to know about the connector on my blog: https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/ or https://nerd-corner.com/dupont-connector-v1-1/

Order a print of this model

Printables

N4Plus Auxiliary Part Cooling Fan Extender

Hardware Needed: 1) Cap Screw M4x45 | 3pcs 2) Cap Screw M4x25 | 3pcs 3) Nut (SS) M4 | 3pcs Print Settings: Perimeter: 3 Top/Bottom Layer: 4 Infill: 25% Support: No Happy Printing!

Order a print of this model

Printables

Frame for LED panel P3 64x64pix 192x192mm P3(2121)-32S-192x192-v8.1

Frame is divided to 5 parts: - (blue dark and light) 2 corners (you need at last 2 + 2 of it) - (pink and red) edge+side, for edge connecting every two panels, - (yellow) cross, for center connection (when you make more than one row of…

Order a print of this model

Printables

Connector 4PIN Dupont / Jumperwire

14mm Dupont version Find out everything you need to know about the connector on my blog: https://nerd-corner.com/dupont-connector-v1-1/ or https://nerd-corner.com/3d-printed-dupont-connector-for-jumper-cable/

Order a print of this model

Printables

Holder for polishing discs pads 4pcs

Order a print of this model

Printables

4208676774PK

Audi R8 parcel shelf washer

Order a print of this model

Printables

Replacement drip tray for the GRP4PBW George Foreman Lean Mean Fat Reducing Grilling

So funny enough my dad somehow also misplaced the drip/grease tray for their Foreman Grill. Rendering the grill unusable since without the tray grease drips onto the counter. Needed my tray to be 12 ¼'' long and could just barely make…

Order a print of this model

Printables

Atorch DL24P top case

You can take all the rest of the housing components from the original design.

Order a print of this model

Printables

A-500FKG-24P DIN Rail Adapter

Adapter for the A-500FKG-24P to a Voron-style DIN rail You will need 4x M4x8 screws, 4x M3x10 screws, and 2x DIN clips. You can find the DIN clips here: DIN-Clip Voron Heat Insert .

Order a print of this model

Printables

N4Plus Voron Carriage Revamp v2

Hardware Needed: 1) Heat Insert M3 x 5mm x 5mm | 6pcs 2) Linear Rail MGN12H 400mm (This is for Neptune 4 Plus) 3) Cap Screw M3x20 | 2pcs (For BTT Eddy) 4) Cap Screw M3x8 | 2pcs (For N4Plus-VoronCarriage-Probe-BTTEddy-Mount v1) 5) Cap…

Order a print of this model

Printables

N4Plus Voron Mantis with KNOMI2 + BTT EBB42 Toolboard + BTT EDDY + DXC Extruder

Printing Settings : Layer Height: 0.2mm Nozzle: 0.4mm Perimeters: 3 Top/Bottom Layer: 3-4 Infill: 30% Support: Maybe needed Material: PETG/ABS/ASA Assembly for the MantisDuct-Remix v1 : 1) 5015 24v Blower - 2pcs 2) 3010 24v Fan - 1pcs 3)…

Order a print of this model

Printables

Motor real 4piston 1.9tdi // Print-In-Place

“Realistic I4 piston motion” 4piston 1.9tdi variation of popular print in place fidget toy. Enjoy and please like :D

Order a print of this model

Printables

Öl Verschlussdeckel AUDI VW SEAT SKODA (4Pins) 05E 103 485

Universal Öl-Einfülltrichter- Adapter Trichter Ölwechsel Einfüllhilfe KFZ Adapter für AUDI VW SEAT SKODA (4Pins) 05E 103 485 C bis 31.12.2019 1,5L PR: DS9 / D8I 05E 103 485 J ab 01.01.2020 1,0 Grundmotor TJ4 / TC5 1,5L D8I / T3KJ…

Order a print of this model

Printables

15V Battery replacement Varta V74PX

In my parents' house I found some old, almost historical electronics. Since these worked throughout, but still required 15V batteries in some cases, I set out to find this type of battery: Varta V74PX. But this one is not produced anymore…

Order a print of this model