Counting matching models…
This is a 3D model of an Arduino clone of the Mega 2560 microcontroller board. I needed one for an enclosure design, but couldn't find one that had precise dimensions for the mounting holes. Despite no officially-diagnosed OCD, my brain…
Happy to present my version of the TR 560 Mk VI Tricorder as seen on the first season of Star Trek TNG. This early style featured a small hand scanner that tucked away at the top, includes a medical tricorder module with its own stow-away…
Es un estuche para tu Arduino MEGA
I needed a stand to mount my Arduino Mega 2560, a standard-sized 16x2 LCD display, and a full-sized breadboard. So, I whipped one up in Fusion 360. Some notes: While designed to fit the Mega 2560, the left four holes also allow mounting…
This thing contains a mounting plate and a drilling guide for the “Arduino Mega / Mega 2560 / Due Drilling And Mounting Plates”. The plates are not symmetrical. The notch shall be on the power jack and ethernet cable side. The base plate…
A simple holder for AS5600 magnetic encoder that can be used with a NEMA17 motor. Details here : https://community.simplefoc.com/t/simplefoclibrary-support-for-stepper-motors/137/42 Category: Engineering
A simple holder for the AS5600 magnetic encoder. The boards press fits into the the holder. It uses the mounting holes already on the stepper motor. Printing downloads 0.2mm layer height No supports required
Stabile Küchenfüße zum Nachdrucken – Universell & Robust Du suchst eine langlebige und stabile Lösung für deine Küchenmöbel? Diese 3D-gedruckten Küchenfüße bieten sicheren Halt und sind ideal für individuelle Projekte oder als Ersatz für…
Note: You have to use slightly longer M3 Bolts
This model is compatible with the lego system.
No screws required, just slide it all together. Originally designed to be used as a RFLink case.
This is a work in progress release of my take on the short sword (dagger) Sting, from the Hobbit and Lord of the Rings. It's overall length is 560mm (22") with a blade of 380mm (15"). As of this release there are no elvish writing on…
Mount for magnetic encoder ,module with AS5600 , use a 608 bearing .
Printed in PLA, 0.4mm nozzle, 0.2mm height, 15% infill density, and no supports. Should allow you to read pinouts and wire the board while in case. Can be powered in case. It is a snug fit. I recommend sliding the board into position and…
does not fit the DW-5600 and similar as the buttons on the module are much closer together.
Prototypová třívozová jednotka 560 přezdívaná Tornádo. Skládala se z hnacího vozu, řídícího vozu a jednoho vloženého.
Arduino Mega 2560 Case A remix from: @firewolf8385 https://www.printables.com/model/602616-orp-arduino-mega-2560-holder His design fit my Arduino Mega 2560 perfectly... So obviously I had to modify it a bit ;) Removed a few pillars I…
This is a replica of the TR-560 Tricorder VI from Star Trek: The Next Generation. It prints in place, only requiring supports between the hinge segments, & folds closed neatly. (I'd recommend printing it in a different color than pink,…
Mount for attaching AS5600 encoder to Nema 17 Stepper Motor. The mount comes in two versions. Easy-to-print version Prints without supports. Requires longer mounting screws. Compact version Requires print supports. Allows the use of…
Hello. Here is continuation of my biggest project - building of Jawa-ČZ 250/353.02 Kývačka. Free 3D model of the bike is available here: https://www.printables.com/cs/model/738743-project-jawa-cz-kyvacka-25035302-part-no1-frame For today…
a simple “slipper” for the Arduino MEGA 2560 R3 to prevent short circuits in a "flying" test setup Simply fits under the Arduino Also includes the CAD - Files
A holder/mount for an Arduino Mega 2560 for ORP compatible plates. About ORP ORP (Open Robotic Platform) is an open-source project for developing reusable and user-friendly components for use in hobbyist robotics. By following a set a…
Hope the 2nd part was fun for you :) https://www.printables.com/model/862690-sidecar-velorex-560-part-no2-connecting-rods As usual the model part consist a big parts but the very small also so pay attention to the description and attached…
This model is compatible with the lego system.
I creaded this 3d printable model of the molle lid grid for my Peli 1560 to be printed on my Anycubic Kobra 2 Max. The parts are connected with 1,75x16 mm metal rods (filament should work as well) and are mounted together with the spacers…
Designed a case for the Arduino Mega 2560 with a hexagonal pattern, because the ones I found, didn't fit the non-original boards I've got. I Made sure that it'll still fit the original boards. Case should lightly snap together, bottom…
I recently bought a Elegoo electronics kit and designed this for the board and breadboard.
Lid - have hole for screw, can be mounted to something. In the fact “lid” become base in this way ;) Base - fits tight to Lid. There are two version, one blank (only hole for led light), second - with a small recess “18” (like 7-segment…
Learn Guide: https://learn.adafruit.com/as5600-smooth-rotary-encoder Build the path of least resistance with this super smooth rotary encoder. This project uses an AS5600 magnetic angle sensor with a QT Py RP2040 running CircuitPython…
A very compact and strong mount for the Arduino Mega 2560. It uses 3 M3*approx. 13mm screws to secure the Arduino in place. The bracket has holes for three heat inserts to secure the Arduino and two on the other side to secure the whole…
Hope the 1st part was fun for you :) https://www.printables.com/cs/model/861669-sidecar-velorex-560 As usual the model part consist a big parts but the very small also so pay attention to the description and attached pictures. As usual be…
Designed this to support the USB-C cable that connects a Dell docking station to the computer. The USB-C port on the laptop is fragile and requires a full motherboard replacement to repair it when damaged. This should reduce/prevent the…
Hope the 3rd part was fun for you :) https://www.printables.com/model/888136-sidecar-velorex-560-part-no3-the-sidecar-body-and As usual the model part consist a big parts but the very small also so pay attention to the description and…
This model is compatible with the lego system.
Weather vane to determine wind direction. To fit AS5600 magnetic rotation sensor and 608Z bearing. Hub is made up of four parts: -Cap to hold bearing -Body to house AS5600 sensor -Base to attach to substrate with hole for cable -Cover to…
With 2 M3*4 and 2 M3*25 screws you can add close loop control to your nema motor. This model is made to respect the profile of the motor and add only 6mm behind it. Simply add a magnet to the shaft and screw this. That's it. There is…
Hope the 5th part was fun for you :) Sidecar Velorex 560 - PART No.5 - Interior od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com As usual the model part consist a big parts but the very small also so pay attention to…
1:1 scale CPU 100% infill recommended no support material ( unless you want to add the 1331 pins on the under side ;P ) bar code, serial, etc. are genuine and a pain in the butt to create
capacity of this powerbank depends on what tipe of the 18650 cells are you useing i used 8x 2000mah batteries so my powerbank have 16000mah. Guide: if you are useing recicled battery cells make sure you balance them to the same voltage.…
This was my first effort at duplicating a physical part in FreeCAD. The FreeCAD file can be modified as you see fit - I did add stl and 3mf for a 256mm bed (split) if you want to try printing. I tried various connectors, snap fit, dowels,…
Hope the 4th part was fun for you :) Sidecar Velorex 560 - PART No.4 - Wheel suspension + main body holders od autora jawarmaniak | Stáhněte si zdarma STL model | Printables.com As usual the model part consist a big parts but the very…
I created a modular inlay for my Pelican 1560 Toolcase - Printable on i3 style printers. ==== This is currently still a WIP ==== I am working on and using this inlay system since more than two years now so I decided that it is time to…
LFP LiFePO4 Battery Case for LF280 cells with bolts Campervan LFP LiFePO4 Battery Case to build a 560Ah Pack fitting under the front seat of the following Vans (according to Flex636 should be working for starting model year 2006): Fiat…
Can be printed with PLA 0.4mm [email protected] layer height. Might also fit for other models
The nametag for Peli 1510 Case I found did not fit my 1560 case I made this. It also fits the 1510 and 1535 Cases with just standing a little bit over the top. But you can still close the Case.
This bracket holds a 28BYJ-48 Stepper Motor and AS5600 12-Bit Magnetic Position Sensor together for testing and experimenting. Update: Turns out all stepper motors are not alike. I created Version2. V2 has the magnet 2mm closer to the…
Features: Gear ratio of 1:13 Self locking/ No backdrive possible thanks to worm drive! “Sealed” (grease/lubricant can be used) Small form factor. Adaptable mount. Requirements: 3D printed parts. 2x - 21x15x4mm rollerbearings. 4x - M3 heat…
I had been lurking, waiting to see if someone would release a charging stand for the Casio G-Shock DW-H5600. Primarily I had been lurking due to lack of skill as opposed to laziness, but thankfully no-one came forward with such a model,…
I have attached two covers, the first has no holes, while the second has holes, so you can connect the modules you want. UPDATE: I have added a model with holes to be able to screw your Arduino 2560 Mega anywhere. I recommend that you use…
A simple model of an Arduino Mega 2560 board
This model is compatible with the lego system.
This is my custom enclosure for the OpenAstroTracker open-source motorized sky tracker for DSLR cameras. Details for this project can be found here: https://wiki.openastrotech.com/ I was looking for a compact enclosure for the minimalist…
The lower front case fan push air into the PSU shroud, this duct redirects it up into the GPU and the rest of the case. It also hides any cables in this section of the case. Can be loose or locked in with 2 screws regular 3mm PC screws.
This 18650 case is designed to fit a 3S8P battery with the balance board. There are 2 different designs: The Spacer files are for people that are using the 18650 spacers to make their pack The No Spacer files are for those who are not…
I made this modell for universal nixie motherboard you can find it on ebay or aliexpress. I used original rft socets and m3 srews. you need to glue the socets holder on the housing and the legs to housing.
Gehäuse für Arduino Mega 2560 mit Deckel und Rückstellknopf
1/64th scale Farmall 560 tractor print with supports if you like this model you can use it as a game peace in the game Crash Derby with this model
It is simply a holder for Arduino Mega 2560 that i have designed for my Printer electronics. Category: 3D Printer Parts
Je l'ai personnellement imprimé sur une Bambulab X1c avec le profil 0.28mm (buse 0.4) Extra Draft en vitesse sport sans surpports en PLA.
While this is completely my own design and model, I completely copied and was inspired by qfqfq's Arduino Mega 2560 Pro case ( https://www.thingiverse.com/thing:4253336 ). Mine is made to slot nicely onto a standard breadboard using the…
Caja peronalizada para Arduino Mega 2560 con ethernet shield, cierre sin tornillos.
Remix of a snooth for a Yongnuo 560. Turns the snoot into a diffuser. Print Settings Printer: Original Prusa MK2 Rafts: No Supports: No Resolution: 0.3 Infill: 20% How I Designed This TinkerCAD Category: Camera
The Synology WRX560 wireless router/access point doesn't have any holes or come with any wall-mounting hardware. This model offers a solution by providing a wall-mountable platform with clips that hold the router securely. Requires…
This is a very simple cap for the Leifheit 85606 Washing Line Ground Socket (Bodendübel Abdeckung) that I created after the original part was lost. I designed it by using FreeCAD and attached the file, too. So feel free to improve this…
I bought this on 23/02/2024 and want to design my own holders, bins, organizers and stuff for the IKEA Skadis tool wall. If you do the same but don't want to spend time on taking measurements, this is your way to go. Import the STL into…
I just lopped off the left end of Oscar's Arduino slot and the Mega fits right in.
This case is for Arduino MEGA 2560. Need x3 M3 Bolts.Contact me if you need any info about this print.
This is a simple tool to fix your FritzBox7560 under a table. You will need 2 of them. I'm using the version without holes, but there is a second version with 5mm holes. You may turn two additional pieces by 180 degree, and you will have…
This is the fourth lot 20 tiles that I created to make Tudor Buildings for my Tudor village that is 00 scale ( 4mm to the foot, 1:76.2) model railways. Can be also used for HO scale, British themed but could be used elsewhere. The cover…
This project is a detailed 3D model of the Arduino Mega 2560 R3 designed specifically as a desk prop and decorative accessory. It captures the iconic layout and components of the board to create a clean, recognizable tech aesthetic that…
SOPORTE PLACA MEGA2560 LLEVA INGERTOS M3/OD4.2/L7
This is a flash projector fitting for Yongnuo YN-560 flashes and an F-Mount lens. You can project anything fitting in the projection-slot - like a gobo.
I wanted to install a 2.5" 5tb HDD into this newer mini-pc, but the darn thing was too small. With the power of Fusion 360 I modeled an adapter to accommodate the extra girth. You will need longer M2.5 screws. I have texted M2.5x20mm…
I designed this to be low profile for my own needs, cuz existing mount models were not great. Narrower then the Nema17 profile Side cutouts for wires only 4mm high. Use PETG or other higher temp plastics, NOT PLA. Steppers get hot.…
For a 18mm motor with three screw mounting AS5600: www.aliexpress.com/item/1005006502384626.html Motor: www.aliexpress.com/item/1005006110056005.html Tolerances are tight, either use a 2mm drill bit to make sure the magnet holder fits…
Magnetic Wind Vane for Arduino / AS5600 A simple and reliable wind vane designed around the AS5600 magnetic angle sensor. No potentiometers, no contact wear — just a magnet and a sensor giving you clean 0-360° wind direction readings over…
Print the backplate with the fireboard opening down and your choice of supports(I used tree). Print the faceplate with magnet holes up, no supports needed. Recommended to print with ABS or PETG since this will be outside. Requires…
My HPE Ethernet 10Gb 2-port 560SFP+ Adapter came with a small backplate and I needed a tall one, so I modelled one in 3D. Note: I printed this model and I am using it, but I did not put a lot in effort in refining and optimizing the…
Mercedes-Benz 560 SEC AMG Widebody — Classic German Grand Touring Coupe Miniature The iconic 560 SEC AMG Widebody — one of the most striking coupes of the 1980s, famous for its flared fenders, aggressive stance, and timeless luxury…
Instead of buying the rare original filter for over 100€ just buy 10€ VW T4 Filter (OE 044 129 620) and print this Adapter (of course with heat resistant material like PA or maybe PETG).
Remix of Original for Dell Precision 5560 + WD19TB Dock USB Plug Support
Ich habe das von lukie80 entwickelte Gehäuse weiterentwickelt und Platz für 2 Mosfets von 3D Freunde geschaffen. Außerdem hab ich es etwas vergrößert und auf beiden Seiten vom Board Platz zur Kabelverlegung ermöglicht. Außerdem habe ich…
NEEWER TT560 Speedlite Flash Diffuser If you have any comments/questions or if you need help with a design, please contact me and if you like any of my designs please feel free to [buy a me a cup of…
Needed an adapter to install an SKR 1.4 Turbo with TMC2209 stepper drivers, after a few tries I finally came up with one that works. I used Jayo PLA Meta in Gray, 1.8 layer height. M3x5 Screws to mount the board, M3x5 with washers to…
Assa Abloy EL 560 lock crude demo STL file
Moin! Der Sockel für das Arduino Mega 2560 hat 4mm Löcher, 6 tief, für M3 Gewindeeinsätze. Passend dazu habe ich noch ein Prototypenboard entworfen, in das noch die beiden Steckleisten von meinem Arduino Koffer passen. Der Arduino-Sockel…
ORGANIZZATORE GT560 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Combo Anycubic Kobra S1 Laser: Mecpow X3Pro 10W
Printed from PLA Makes mounting an AS5600 module to a Gearbox motor easy, magnet neads to be glued on the axle https://amzn.eu/d/7d1CGoh
Check my other IKEA designs: Ikea Metod Screw On Leg Extender (402.055.99) IKEA Metod Back 10mm Spacer Replacement (10036383 or 10039201) Why Do you have a robot vacuum that can’t clean under your IKEA Metod cabinets? The default 8 cm…
A long time ago I got this LEGO set as a present from my dad. Because I like to drive fast and the RC control is only binary I crashed a few times and the jumps of the included big cardboard ramps did their part as well and the front…
LEGO AS5600 Mount with Magnetic Axle Adapter Enhance your LEGO projects with this custom mount for the AS5600 sensor. Designed for seamless integration with LEGO components, this mount provides a stable and precise setup for your sensor,…
ATMEGA 2560 Stand w LCD and Breadboard with threadedd inserts for 3D printing M3 x5.7
Windrad-560 (English-Text is below) Das von mir entworfene Gartenwindrad mit 6 gebogenen Flügeln und einem Durchmesser von 560mm (also 56cm) ist ein schöner Blickfang für jeden Garten. Dank der Heckflosse dreht es sich immer gegen den…
Mega2560 ProMini case M2x6 screws Print Settings Printer: Hephestos2 Rafts: No Supports: No Resolution: 200micron Infill: 20% Category: Electronics
This is a tiny footprint case for stacked Wemos D1 mini esp8266 board and Mini560 dc-dc buck converter. D1 mini sits on the bottom of the base part, Mini560 is secured on the cover part by small clips. Solder necessary cables on your…
A very compact and strong mount for the Arduino Mega Pro. It uses 2 pegs and some hot glue to secure it in place. The bracket has holes for two M3 heat inserts to secure the whole mount to whatever you want. M3 Heat Inserts, OD 5mm,…
Since attaching a magnet to the Nema 17 shaft is difficult, I added an alignment jig designed to fit into the holes on the Nema 17 housing. Adhesive is used to attach the magnet 2 of M3 35mm socket head bolts are used to attach the mount…
