Counting matching models…
Powerbank 21000 mAh with 18650 Li-Ion batteries. Part list: powerbank modul SW6208 (power rating of 22.5W) 6 Samsung INR18650-35E (6x3500 mAh) 2 screws M2x10 (for housing) 2 screws M2x5 silicone cable AWG18 silicone glue Advice: Fix the…
Držák WAGO svorek 4x 5W. Velikost WAGO cca 30x10x18.5mm. 7.2.2023 - Opravena malá mezera v podstavci. Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji
This model is inspired by the Cambridge Audio Minx Mini12 Speaker box designs for a twin centre and single left and rights to utilise the Dayton Audio CE65W-8 Sub box designed for the Dayton TCP115-4 in a sealed configuration. The grills…
A wallmount for the Bosch powertube (625 Wh, 500Wh). hole in the bottom for the Charger Cable. you can see the powerlevel LEDs and push the indicator button.
Hello! This model is made to facilitate the modeling of the mount for this popular video transmitter and simply as a visualization of it for later use in 3D renderings of your drone assemblies.
Redesign of a Wago mount (from Voron) with embossed labels for my RatRig V-Core-3. It has two countersunk holes 55mm apart for fixing it to Voron's really cool printable DIN clips. I have included the STEP and F3D files so you can modify…
Držák WAGO svorek 3x 5W na DIN lištu. Velikost WAGO cca 30x10x18.5mm. Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji
Matches the shape of the OEM phone cubby. To install: Print as you like. Put the 15W magsafe charger in position. The 25W will not currently fit this model. Press the cord into place on the back, minding the bends. If taping, place 1-3…
A case for a power bank control board that fits 17x 18650 cells. You will need these parts: 1x power bank control board - you can buy it on Aliexpress The module is great, with 2 USB outputs, 1x USB-C input/output with fast charging, 1x…
It's possible to print it with tree support which touches just a boilerplate.
Držák WAGO svorek 6x 5W. Velikost WAGO cca 30x10x18.5mm. 7.2.2023 - Opravena malá mezera v podstavci. Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji
Diseño realizado por mi, echo en fusion 360, funcional y actualmente lo uso para mi notebook ThinkPad lenovo T14. Design made by me, made in fusion 360, functional and currently I use it for my ThinkPad lenovo T14 notebook.
Whats needed to build this ? The 100W/65W DIY Power bank Modules typically available on Ali-express / e-bay etc. (Model : MYZL-YD24-2.32) 6x M3*4*5 mm Heat Set Inserts (installed on the Base to secure the Lid) 6x M3x8mm Flathead screws…
This is a simple mounting adapter designed to mount a Baseus 65W Battery to the dbrand Steam Deck Killswitch case. The battery is fitted to the mount using a simple friction fit and the mount attaches to the Killswitch using dbrand's…
https://www.aliexpress.com/item/1005005986842547.html
In addition to the 3D-Printed parts you will need the following: 4x M3 Heat-Set Insert (Short) 5x M2 Heat-Set Insert (Short) 4x M3x8mm Flat-Head-Screw 5x M2x5mm Flat-Head-Screw 2x USB-C PD 65W Modules 1x Makita battery adaptor 2 Pin…
The height of the case is designed to place 12 mm high radiators for better cooling of the chokes and PWM controller. If you want to use a board without a heatsink, the height of the case can be reduced in the slicer. Personally, I don't…
simple box for aliexpress module QC4.0 QC3.0 Type-C USB PD65W standard bare wire version
2026/01/26 update: Added dual stack mount to mount 2 module at once. Remember to cross the wires as the are mounted opposite with each others. ===== 2025/10/15 Update: A user asked for source Fusion360 file so I've added it. ===== I…
This is a Remix of a Mag Safe Charger for a 2024 Tacoma. 3D Print Face down with no supports needed. PETG or ABS/ASA recommended to prevent melting in the Truck. The Mag Safe charger wire can be hidden in the print. Use alien tape in the…
Since the original mount of the Garden Highpro 5W clip fan isn't really suitable for (especially smaller) grow tents, I designed an alternative one. It can be mounted to a pole of the tent with two zip ties. I additionally put a strip of…
Some endcaps for the ThinkPads 65W charger to wind up the cables with and keep them tidy. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Yes Resolution: .2 Infill: 20 Category: Organization
This cable wrap allows the USB-C cable to get neatly wrapped around the power brick. I would recommend to buy an angled IEC C7 cable like this one:…
I liked the idea of the original model, but it didn't fit for my smaller charger (65W) and the hinges “flipped” over. So I created my own variant in Fusion 360 (file attached). I printed the model with supports and 0.2 height. However,…
Update September 2nd, 2024 Added taller enclosure: “Enclosure-4x-LTO-v1.3”. It's 65mm tall and only includes mounting holes for the BattRAK x4 LTO. Added BattRAK x4 LTO. It holds 4 HTC2265 cells. These files are a duplicate of the files…
Made for my S22+ with a UAG Monarch series case (13,5mm thick). Can easily be printed without supports, just expect that you may have to cut a few loose pieces of plastic at the top bridging part. It should friction-fit the charger just…
Vertical wall mount for a CaDA C64005w Alfa Romeo F1
Hier stelle ich meinen Entworfenen USB 15W Filament Trockner vor, er Verfügt über eine 3Stufen USB Heizung diese ist eigentlich für Kleidung gedacht und auch somit Wasserdicht. angeschlossen wird es über einen USB Typ A Anschluss und ist…
Update 11/3/23: Added a slot for a Logitech wireless mouse/keyboard USB dongle: “X1C Cable Reel with USB.3mf” Original: Cable management spool for a Lenovo 65W charger that came with a Think Pad X1 Carbon Gen10. I would bet that Lenovo…
Found a compact powerbank module on aliexpress. its a smaller 22.5w version compared to the rest. As I wanted a more pocketable powerbank with more amps. Installation instructions: installation is pretty straight forward. there is a top…
UPDATE: Reworked also to fit the F-91W. Print Setting Material: TPU Layer Height: 0.20mm I printed with Overture High Speed TPU 95A.
With certain models of TwoTrees diode laser rigs, including TTS-25 (2.5W), TTS-55 (5.5W), TTS-10, a 3D-printed holder comes with it, that holds the nice “Focus Assist Metal Column.” In my case the hole was too small (too tight for the…
Original model was very well designed, however I have reservations about having it completely enclosed with 65w output so I added vents to the top. Because of the added vents, its labels can no longer be on top so I also moved that to the…
The MkII Wind Turbine from 3dprintable1 is an excellent model but have taken to upgrade some of the components. The original plans files are found at: https://www.thingiverse.com/thing:2060281 The first change is the crank arm which holds…
I created this model in OpenSCAD and then applied the callsign text in Bambu Slicer. I've included an example STL with my callsign, KQ4VYY. To print this model, I use a Bambu P1P with AMS for dual colors and a 0.2mm nozzle, but this could…
I made 4 versions for different focal length settings.You should use some rubber ring for sealing from the laser side (red circle on picture) Air input diameter is 5.4mm My air source - 2x CT-404 silent aquarium air pump…
I made this model to use in 3d mock-ups. Measurements taken from a real sample. Note that these usually come in a pack of two, connected together. The link to the specific model is here: https://www.waveshare.com/8ohm-5w-speaker.htm
Simple power module from cheap board less than $1 PD 65W . XT60 --> Usb-C https://youtu.be/TSSBQ88SkE8
I made this model to mount the powersupply for my lenovo dockingstation under my desk. quite a simple design, but i coulndt find it anywhere else, so i made my own :)
I wanted a vertical phone stand with wireless charging for my Samsung Wireless Charger. I couldn't find any models I liked, so I created one myself as CAD exercise. I created it for: Samsung S23 Ultra with Otterbox Defender Case Samsung…
Holder should fit any similar chargers with dimensions 109x47x30. The ones which are bundled with T14s and T490 fit. Mount it under the desk using two wood screews. Update : assymetric version 2 makes it easier to screw.
The original model featured a hole for a C7 Type connector (The one with only two pins) on one side. Because mine had an plug of the C5 Type (looks like an cloverleaf) it woudnt fit. I edited it so it fits for my plug. For this remix i…
Baseus USB C Ladegerät, 65W USB C Netzteil 4 Ports GaN Charger
A wall/desk mount for the Ugreen Nexode 65W 4-port USB charger based on the Ugreen Nexode 200W Wall/Desk Mount by dead1egs .
This is a further development of the bedside lamp with the box shape https://www.prusaprinters.org/prints/20852-bedside-lamp-box-led-12v-25w . Now this lamp had become a tube shape and you can print the backside as switch or dimmer…
Part list: powerbank modul SW6208 (power rating of 22.5W) 4 INR21700 (4x5000 mAh) 2 screws M2x10 (for housing) 3 screws M2x5 silicone cable AWG18 silicone glue Advice: Fix the module board screws M2x5 Fix the housing with screws M2x10 Fix…
Warnings: ⚠ Please read the powerbank module instructions ⚠ Never solder to batteries ⚠ Assemble and use at your own risk ⚠I reccommed getting brand new, reliable batteries from a well known brand, such as Panasonic, LG, Samsung. 2 x…
This model is a housing for a PD65W Fast Charging Module that has a type-C USB interface that supports PD3.1 QC3.0 SCP PPS Fast Charger 5V 9V 12V 20V and DC input voltages from 8 to 32v. The circuit module is like these:…
EN: The Prusa XL with 5 print heads has unused 24V terminals in the centre PSU for connecting the module. I have installed a car fuse holder ( Aliexpress Search ) with a 2A fuse, as this is sufficient for my USB devices. The CKCS board (…
Milwaukee M12 Battery Power Supply ZK-4KX 35W MODULE CASE TOOLS / HARDWARE NEEDED ------------------------------------------ 1X ZK-4KX BUCK BOOST CONVERTER (35W) 2X 14/16AWG FLAG TERMINALS 2X 24mm - 1/4" Male Spade Crimp Terminals 6.3mm…
A holder for Anker's slim 65W USB-A + USB-C power adapter. Can be mounted to a wall, under a shelf or whatever with double sided tape or via the two M2.5 screws. I had my power brick stuck to my bedside table with double sided tape for a…
Insert that fits into the deep part of the Rugged Pinecil XXL Case . It features mounts for a USB PD 65W 20Ah Battery from baseus and an Omnifixo. Model Link:…
I needed a holder to mount my power adapter (65W) of my Lenovo IdeaPad to under my desk. The holder allows for the power adapter to be removed and taken away if needed. The holder itself can be glued with double-sided adhesive tape to a…
Updated 05/22/2025 NOTE: There is another version of this adapter, before you print this, check out… https://www.printables.com/model/615935-usb-c-65w-charger-compatible-with-dual-ryobi-18v This printable adapter allows a single Ryobi 18v…
This is my custom design case for powerbank It use 6 cells 3s2p configuration that suitable with this powerbank control board. Print setting: Filament is PLA-F, this type of filament has some flexible compare to PLA No support needed 0.2…
Dab Station for DTV5 with Hubble Bubble This Dab Station is specifically designed for the Divine Crossing v5 Atomizer with the Hubble Bubble and the Eleaf iStick Pico 75W. It features custom fittings to accommodate all the necessary…
Hello, This is my first print. i was inspirered by Andrew and his https://www.prusaprinters.org/prints/1725-thinkpad-e580-stand Print instructions Printed in PLA
A dock for 2 Ugreen power banks as detailed in the video above! Hardware 2 x 25mm M3 screws for eject arm pivots 2 x 12 x 5mm springs (or similar) 2 x 12mm M3 countersunk screws 2 x UGREEN Cables (Ugreen US286) Printing Instructions I…
Hi didn't want to cut holes in to my gyprock walls (dry walls for those in the US) to mount my TP-LINK EAP-655wall wifi access points. You either need the incoming POE ethernet cable coming out of the wall or you'll need a 90° patch lead…
Not sure does it really works, but at least it blows the laser smoke away. Any tips and suggestions are welcome. Fits a normal 6mm OD tube. I will add the “angled” air input version later. Printed with ASA, 40% infill, 4 perimeters but…
A quick and easy 3d print for a magnetic Quick release 20w (5w) Foxalien Laser module mount - designed to be attached to an already mounted 1.5kw Air Cooled Vevor Spindle. No supports required Print at 0.2mm layers You will require 3x M3…
I wanted something to keep my charger out of my desktop table. This is a mount to be screw under a table/desktop, it places the charger in angle so I can see better which port I'm gonna connect. Not very convinced about that, but I have…
A case for 65W USB-C PD boards that take 8-30V DC input. The board I used is here (see picture below) https://amzn.eu/d/glfAvNE I used mine to make a custom power supply for a ZimaBlade to run from a router UPS with a 12V 3A DC barrel…
Just another box to put your Nodemcu together with a Meanwell 15W 5V power supply :-)
Updated 05/22/2025 NOTE: There is another version of this adapter, before you print this, check out… https://www.printables.com/model/448954-usb-c-65w-charger-compatible-with-ryobi-18v This printable adapter allows dual (or single) Ryobi…
2026/03/12 Update: Added v7 for newer, cheaper copies of the board without mounting recess. ===== This case was made for the base model of this U1E 65w Type-C PD board with solder points. It's a tight fit with the groove, so consider it…
I recommend printing vertically with supports. This will provide the most strength.
I printed it in PETG, but should also be fine in PLA.
Enclosure for CKCS U1E 65W USB Type-C PD Module (XT60 Input) This enclosure is designed for the CKCS U1E 65W Type-C Power Delivery module , featuring power input via Amass XT60 connector . Purpose The primary goal of this design is to…
Držák WAGO svorek 5x 5W na DIN lištu+montažní otvory. Velikost WAGO cca 30x10x18.5mm. Koukněte i na mé další modely . Pokud mě chcete podpořit, můžete zde: PayPal , BuyMeACofee , QRCode . Děkuji
LX-PB225M power bank module for 3D printing. Accurate dimensional model for custom enclosures, prototypes
Overview This 3D printable fan shroud is a custom cooling solution designed to bridge the airflow from a Dell Micro CPU fan directly to an Nvidia Tesla P4. It is ideal for users turning their headless server GPUs into active-cooled gaming…
This is case for USB Load tester KZ35. I added also banana holes for probes. Print without suppot and raft, 1,2mm layer and 30% infill. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 1,2 Infill:…
Maytech MTSKR1905WF Controller / Chargermount
A clean way to add a USB outlet to your printer. This is the MK4S version and allows you to power 5vDC USB items like cameras, etc., easily, without external power sources/supplies. The unit requires the same parts as the MK4 version…
Say hello to ChargeBuddy V3 —your portable power pal that’s as efficient as it is stylish. ⚡🔋 Powered by a 22.5W quick charge module and two Samsung INR18650-35E batteries , this compact DIY creation packs a punch, delivering fast and…
Based on "PLAzzy, 12V LED Dog Lamp" https://www.prusaprinters.org/prints/20323-plazzy-12v-led-dog-lamp I designed this bedside lamp. I have tried to capture the working steps and the assembly in photosl For this project you will need: 1x…
Cable tidy for the surface charger (65W). Easy to use, wrap the cables around your hand to form a loop, then slide the loops into the sections of the tidy. If you're looking for the 44W version (slightly smaller), you can find that here .…
Simple mount for the Anker desk charger.
A mount for Satechi 165W Charger to mount under a desk. Can be mounted with screws or double sided tape. It can be printed with PLA, but this charger heats up a bit under load, so PETG or even ASA/ABS is preffered. It can be printed…
Remix and adaption of Whitys model of a case for the MacBook charger, that prevents the charger from scratches. This one fits snug on the 35W power adapter. Please leave a like and/or a review if you like it.
Charger model: A1424. Macbook model I used it with: A1398.
I made this wall-mounted holder for mine the Lenovo ThinkPad Laptop 65W AC-DC adapter to organize the workspace and manage cables in the office. I printed it from PETG and used a 100% infill. Like what you see? Click an image below and…
This is a casing for replacing a W5W bulb on a motorcycle Check the project out: https://cad.onshape.com/documents/92e5c3f798f8a6130066ce51/w/ae7076d22dcda7223fb65552/e/e8d850c0570b8a4c87a23cd0?renderMode=0&uiState=66744d19abe31d625ad50dec
Baseus 65W GaN Charger mount https://s.click.aliexpress.com/e/_DDM7u8V
Моделі корпусу фірмового павербанку нашого клубу робототехніки CyberConstructingClub. У основі лежить модуль павербанку 65/100W на мікросхемі IP5389 з двома type-c портами. У конкретній збірці використовується з'єднання 3s2p що дає…
Case insert for the Samsung 45W charger (GaN) with it's included 1.8 M USB-C cable. Based on a remix I made a while ago, but this time I've redrawn the whole design. It features a slot for the steamdeck to serve as a stand, and has USB-C…
This is a simple holder for the lenovo 65W power supply. Mine comes with the T14s. I mounted it under my desk. I have incorporated many cut-outs so that the heat can escape. There is a 2nd version without cutouts in the side because they…
thegribble's charger cradle works perfectly fine, though I wanted to a make a version where everything was accessible without needing to remove the whole thing. This version I came up with, should let you easily get the charger and cable…
I created this model to hold my Baseus 65w GaN charger under my desk so I can charge my phone, power my soldering iron and an extraction fan. The charger prints without support and in the orientation you would have it under your desk.…
I remixed it to fit the monitor shelf of my IKEA UTVISNING desk. The monitor shelf is about 22.3mm thick and the remixed model has a gap of 22.2mm. I removed the screws from the model because it fits the shelf very well. This remixed…
This is a stand for the Eleaf iStick Pico 75W mod. When you put on an oven like the Sionara Top Airflow it becomes a little top-heavy and this prevents accidental knock-overs while it's not in use. Open to suggestions/changes/additions. I…
Phone stand that incorporates the 15W Spigen wireless charger. Should fit most Android & Apple phones. I already owned this Spigen 15W wireless charger:…
Speedy Bee F405WingApp Case with built in BZ-251 gps module holder. Print the gps holder out of tpu. The rest can be out of whatever you like. You will need 8 m3x4 and 4 m3x6. It requires to xt60 connectors with the grey wire covers on…
This is a wall mount for "UGREEN Nexode 65W USB C" table charge device.
Just like the original model. print 2 The model is a snug fit around the adapter. Print Settings Printer Brand: Prusa MK3S+ Rafts: No Supports: No Resolution: .20 MM Speed Infill: 15% Material: Prusament ASA
Enclosure for V1284 22.5W PD QC AliExpress Powerbank Controller and 126011 battery bank. Requires superglue for assembly. Light guide should be printed with translucent filament.
This tool just can be screwed to the wall, which is especially usefull, if you supply a docking station with it and only need to take it out occasionally. This design also fits the newer lenovo PSU models with 95% efficiency, which are…
just a socket for a w5w bulb for hardware works in your car... DESCRIPTION: no soldering - all you need is a printed part, w5w light bulb and two 0.5mm2 wires (optionally multimeter pins for the other ends - you can use even nails or pice…
This is a simple level roller mount for longer ray 5w. For mounting you need: 2x screw M4x8 2x T-Nuts for V slot
