223 models
Simple non-marring tip to keep the metal from indenting on the wood. Once printed need to give it a couple of whacks to push the plastic piece on to the metal tip. Print settings I used: 0.2 mm, Prusament PETG, 0.4 nozzle, 15% infill, 3…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
This is a simple design for the Suptek MD6802 desktop screen holder. This is not designed to hold any weight, rather it's supposed to stop the upper part of the rod from shaking, which induces stress on the supporting base. This accessory…
You can buy these from me here! Consider supporting us on Patreon! These are battery holders that can hold (2) 18650/(4) 18350, (2) 21700, (2) 26650, and (2) 26800. I print these out of PETG for the toughness. My builds use a 0.6mm nozzle…
Allows you to use Makita DHS680 on makita guide rails.
Bearing Press Tools for 6900, 6902, 6802 Bearings The files marked "Press In" are a remix of bikenerd tools. I just changed the numbering to be on the side so it could be bigger text. The files marked "Press Out" are for pushing the pivot…
All credits to placebo_design for his beautiful and functional design (thingiverse.com/placebo_design/designs). This is a remix of “51mm Funnel for porta filter Delonghi EC680 series” by “Placebo_design” (thingiverse.com/thing:3471204).…
Print it using a heat resistant material. Orient the print so it is on the side, NOT laying flat on the build plate. Use supports. Use 0.10 mm setting.
This model is compatible with the lego system.
This is arduino BME680 breakout board sensor enclosure/casing. Its made so that the circuit and the sensor are separated with the wall, that way the circuit is protected from the moisture. For even better protection some silicone sealant…
A simple enclosure kit designed for assembling a straightforward room sensor, enabling you to effortlessly monitor temperature, air quality, and humidity levels within your living space. Perfect for Home Assistant integration. Key…
This is an adapter made to suck dust from my Makita DHS680 circular saw with a shop vacuum. opening is 38mm in diameter. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: low Infill: 25%…
u can use 6803 zz/rs2 this is my model little transformed
This is an easily printable bearing (more like a bushing) with the size and shape of a standard 6801 ball bearing. It has two separate pieces that when printed are captured together but can still rotate. This works for a stand-in while…
Use ASA,ABS, PA6 , print with support easy installation with direct taping screws 2.5mm diameter and 3.5mm screws or epoxy glue
osVAC Connector for my Makita MAKITA DHS680 (US: MAKITA XSH03). It is a remake/mix to fit Makita and the osVAC Connectors. Update 2022/05/29 V5 More Material for the screw, because i've cracked it after a few uses with a long hose of my…
Replaces drip tray so that you can fit a scale on the level under the group head
Be careful, you need to change the needles size. Update: the needles size: In green: 22mm (4x) In yellow: 27mm (1x) In orange: 32mm (4x) In red: 37mm (1x)
This is a housing I made for an ESP32 (doit esp32 devkit v1) and a BME680 gas / air quality sensor. Parts: 1x ESP32 Devkit v1 (eg…
Designed a Makita DHS680Z dust bag since I currently do not have a shop vac or for instances when needing to take it outside. I designed it so that there is a hole in the filleting cap. This should allow displaced air to escape. It is…
Do you own amazing gyroscopic DeWALT DCF680G2 and has no place for storage? This hanger holder is perfect for hang screwdriver and two batteries in bottom of shelf. There is hole for screwdriver and small gap to keep device in even in…
I couldn't find any lids for larger Nutella jars online, so I made this one out of OuterSilent's one I found on Thingiverse by adjusting the size and threads. I wanted a tight fit so I can store kimchi and other liquids in the 680 and…
Den Code für den Arduino findet ihr ebenfalls im Downloadbereich (unter "Files" wenn ihr auf Download All Files. Diesen könnt ihr natürlich nach belieben anpassen. Aktuell zeigt die LED-Leiste die verbleibenden Schüsse an (Achtung: der…
The part number of the w639 glove storage compartment is A6396800291 You can buy a replacement compartment for roughly 120€ from ali express sellers or 250€ by amazon sellers. But we are here for nifty DIY solutions, right? This Repair…
For english description please scroll down Komplett over-engineered Sägeschienenadapter für Makita Akkusäge DHS680. Mir war der originale Adapter mit ca. 40 € deutlich zu teuer und zu fummelig. Was du noch brauchst sind 5 Stück…
This model is compatible with the lego system.
A simple slim light weight enclosure for a BME680 sensor. Designed based on the measurements of the specific board I was using, your mileage may vary. STEP file and original Autodesk Fusion model file included.
As I was working on my friends Dedica, I got worried about scratching the fairly cheap chrome coating on top. I wasn't pleased with availabe designs as they didn't account for the ripples on top of the machine, so here we go. Holds two…
Mounting Base Counterplate and Clamp uses M8 allthread with a welded tab added Versions without Nissan and 200SX Features
PLEASE READ: The frame for the grips is pretty tight and one of the tabs might poke your USB or SD card ports when you put the frame on. Its also a bit of a tough one to take off, so I have to push on the tabs near the joystick on the…
This model is compatible with the lego system.
You can buy these from me here! If you like our models, consider giving us a 1 time donation! I print these using a 0.6mm nozzle with 0.2mm layer height using PETG They are very durable!
This model is compatible with the lego system.
An adapter to allow 3M spraypainting/dust/particulate filters to be used with NATO gas masks using the 40mm isometric thread. You can copy and edit the original file here:…
This model is compatible with the lego system.
Volvo XC90 Folding Folding Seat Latch Release Handle (Rear, Interior code: RXXX, RXXX). Volvo original PNs: 39826799 ; 39826801 Two files, with and without Volvo logo available. If printed in high strength material (PETG, PCTG, PCCF etc),…
Board models for: BME680 SHT31/SHT41 SGP30 Category: Models
The same model as the original, but for different bearings.
The remixed model fits snuggly and does not “swim” or have any uplift, in the sink or shower of the VW Grand California 680 Van. It also sits flush with the surface of the sink bottom. The original seemed a little to high, probably…
Material Joints ABS, ASA, or PETG Armor Any Layer height First layer 0.2 mm Other layers 0.15 mm Number of perimeters 2 Infill 20%, rectilinear First layer speed 25% of default Elephant foot compensation 0.15 mm Supports None Brim As…
The cap of the water tank from my De'Longhi Dedica Style EC 685 was broken so I printed a new one. :-D I made this with Fusion 360. You can support me if you want: https://www.paypal.me/mikebayer3d Print Settings Printer Brand: Anycubic…
You can support us by purchasing our paid model to get more free products.
Pretty simple designs. Not perfect but work well. I made these because the other ones I was seeing required purchasing special screws from the hardware store. I haven't verified all the model numbers in the title but they should be good.…
You may need to scale it up or down slightly to help it fit better, or warm up the plastic before putting the bearing in. Also, turn on random seam to help keep it from splitting. Here are the bearings I used (any 17x26x5mm bearing should…
Remix of a remix made in Fusion 360. F3D files included. I made the 18650 battery case and thought it was great but I also wanted a case that fits 26500, 26650, & 26800 batteries. 3mf file made in OrcaSlicer has all the components needed.…
This model is compatible with the lego system.
I want my electronics protected so I made a case for the BME 680 sensor. It has some small indents on the lateral, to he
I made an upright mount for a TYT TH-6800 Dual Band VHF/UHF transceiver to fit in a 50 cal metal ammo box with batteries. This makes an easy go kit with a little more power than an HT radio. I couple this with a tiny mag mount antenna…
Sun visor for T680/T880 it's not an exact replica but if fits. Still have to see how long it lasts
Box for the gas sensor BME680. Project https://github.com/heximcz/raspberry-pico-mqtt-bme680 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.16 Infill: 15% Filament: Design Devil PET-G…
Replacement for Singer - second spool pin holder (vertical auxiliary spool pin) #68003702 . Printed with PLA and I used supports.
I really liked the model by @Gypo_282797 and asked him for model files, but i never heard back - so I created my own version. Rather than to use magnets and scratch the metal tray, I suggest using double sided tape. This version was made…
Print solid with PETG, 0.1-0.16 layer height.
For use with a delonghi 680/685 portafilter. Fits perfectly to a delonghi 685 and a graef cm 800. Put it on your portafilter, fill it with your coffee grinder, twist it half a turn and you are ready to tamp. Print Settings Printer Brand:…
Fill a Nutella Jar with water and a small amount of hydroponic nutrients. Fill the hole in the lid with a hydroponic growth medium (coconut coir, mineral wool, etc). It's also a good idea to let a small strip of cotton hang from the…
This wall mount can be printed upright, the bridge between the two rails feels a bit flimsy, but that doesn't matter as soon as all 4 screws are in. It works just fine, printing this model in PLA .
This is an enclosure for the BME680 board by Pimoroni. It's designed around the use of angled pins, though there should be just enough space if you'd rather have straight pins soldered to the board. The lid snaps nicely onto the two…
Ergänzt um den osVAC Anschluss
Vacuum adapter from Karcher WD2 (may work with other WD) to Bosch Jigsaw GST680 model. Quite tight fit, so you will be able to do work without disconnection. Ender3 V3 SE Layer 0,2 No support No raft Nozzle temp. 210 Material PLA
This is, in my opinion, the best and cheapest way to modernize your GX680. Battery life has been great with two 18650 cells and the build is relatively simple. All the parts are available on Aliexpress. This is a remix of futtigue's…
This model is compatible with the lego system.
Printed in PETG with 5 perimeters for added strength.
Not much to describe. Works as pictured. If you're seeing the other Skadis holders in this image and want those instead, check my profile. Designed for use with T-slot nuts. I personally like these , but in theory you can use whatever.
A hanger for the DeWalt DCF680 featuring: trigger cutout allowing storage in both straight and angled grip configurations storage for spare battery - fits with or without protective cap storage for DeWalt tough case - keeps your bits at…
his is a part for the original hose adapter for the Makita DHS680Z saw. The original part is exchanged with this part. This part is for the Festool cleantec hose connect. update: additional nose for better grip Dies ist ein…
Bosch trimmer blade best printed in Flexfill 98A. Roughly half the price of original blades and better reliability. Tested multiple design and filament options throughout the summer. Original Bosch design and PETG options were too bristle…
Deutsch: Einfaches Modell einer XFX RX 6800 mit den wesentlichen Details. Kein 100% detailgetreues Modell, zwecks des Aussehens auch keine 100% Maßstabstreue. Stützen: Ja Layer-Höhe: 0,15mm English: Simple model of an XFX RX 6800 with the…
Tesla Batteries with stand
I hope you will like this model! :) Layer height: 0.15 mm Supports: Yes
Wall mount for Makita DHS 680 circular saw Category: Tool Holders & Boxes
Simple reference model I took from the website Everything is based off of the a picture and scaled to the size of the USB port From Minisforum Website It's not good enough for a clearance fit But it will get you in the ballpark
A case mod that allows for use of off the shelf 4010 fans as a replacement for the fan and heatsink combo that ships stock with the EM680. The same screws from the original as well as the feet are reused. You will likely require a…
Makita DHS680 circular saw vacuum adapter for Bosch GAS dust extractor
Filament used: ASA for improved thermal resistance. Printed using standard Bambu Lab printer settings. It is not perfect, but it works for me (the small part does not fully align with the larger one). Can be printed as a single piece on…
Does what it says it does. Stops the dust filling your apron
You can buy these from me here! Consider supporting us on Patreon! These 26800 battery holders with a screw lid are incredibly tough and rigid! Designed for use with unprotected button top and flat top cells. Print the bodies out of PETG…
Tested with standard PLA printed at 0.20mm layer height.
Saw blade cover stop, for easier cutting with guide rail. Prevents the cover from lowering than the saw table. Be careful and act at your own risk. I take no responsibility for personal injury or destruction of your equipment! Screws…
Saw blade cover stop, for easier cutting with guide rail. Prevents the cover from lowering than the saw table. Can be rotated 45 degrees to choose if blade cover should be stopped or functional as normal. Be careful and act at your own…
I'm using a bottomless portafilter for my Delonghi EC680 (similar to EC685), and it always annoyed me quite a bit, that the original cup holder has two holes where the coffee drips into, once the cups are removed, but now I only need one…
Here are the step-by-step instructions for installing this replacement cover for the SSD bay in the UGREEN DXP6800 Pro NAS. This cover facilitates the mounting of a 120mm fan to the bottom of the NAS, enhancing the cooling and airflow…
Belt holster for said USB battery. I designed this so that I could use this to power my Vive Pro wireless VR HMD longer than the stock battery. Print instructions Holster is a separate scad file and dimensions can be freely adjusted if…
Remix of https://www.printables.com/model/545406-dht-outdoor-housing-extended-base-plate which is itself a remix. I just added in a mount for a BME680 which has major improvements over a BME280. Get air quality and atmospheric pressure…
Makita DHS680 multiboard mount Top Mount: Secures with two “Large bolts” (a stronger t-head version included). Bottom Support (Optional but recommended): Enhances stability - attaches using two snaps. Compatibility: Specifically designed…
this was printed in Prusament silver PLA using a 0.6mm nozzle 2 walls/2top and bottom, 0.4 will also work fine but I would recommend 3 walls/top/bottom needed a booster to raise the height of my corsair case to fit a blueray drive…
Dust collection does wonders. When i used circular saw for the first time i ended up all white from pieces of wood that i was cutting. Thats when I became dead set on connecting my good old Dyson DC19 vacuum cleaner to cutting tool. And…
This is a remix of the low profile version of https://www.thingiverse.com/thing:2153437 by @bobtidey. I created a cap for the power button, extended the lid 1mm to center it better over the I/O pins and added a little hole over the reset…
The box will work for pretty much any ESP8266 project, it's designed around the ElectroCookie 1/4 solderable prototype board. The board mounts to the box with M2x5 screws The magnets are sized for 2mmx5mm Neodymium. Make sure you get the…
A simple divider made for either CRAFTSMAN CMST40709 / ArtBin 6809PC (same bins from the same molds but different branding and colors) These are for the bigger 9 bin storage versions not ones with a ton of tiny slots. This bins don't come…
This is a holder to attach an Anker PowerCore+ 26800 PD to an IKEA Skadis plate. Nothing very special about it. Printed it myself in PETG. 0.2mm layer height 0.4mm nozzle Filament used: https://amzn.to/3J4QhE3 - awesome material. Prints…
Part of my project to create gridfinity toolbox using Dewalt TStak Drawers. Holds the Dewalt DWHT68001 and 14 bits. Includes magnet holes.
This is a fan holder for the Motorola 68040 CPU for use in Apple Macintosh computers. This bracket is designed to hold both a Noctua NF-A4x10 fan which is a 40mm x 40mm x 10mm fan and a 40mm x 40mm x 11mm heat sink sandwiched together.…
Video: https://youtu.be/f3HCPcvtOeY Guide: https://pastebin.com/hQnH6Q2W Parts: ESP8266 V3 Module ( Amazon US )( Aliexpress ) BME680 Module ( Amazon US )( Aliexpress ) 0.96" OLED Module ( Amazon US )( Aliexpress ) Dupont Wires (Included…
This is a replacement rotary encoder knob for the TM680/TOM680 keyboard. There are three different versions: regular cylinder, filleted cylinder, and chamfered cylinder. The knob's outer diameter is approximately 19.5mm, and the stem…
I needed a chamber temperature sensor for my Voron Trident, and had a BME680 sensor laying around, but could not find a simple mount that I could print to fix it to the extrusion of my printer. Secure the sensor PCB using M2 self-tapping…
I managed to lose the case badge for my Sharp X68000 Super HD computer so I made this, it should be a fairly close approximation (not perfect I know). Paint the characters with a bright bronze colour and it should look good. Print…
Portafilter hanger for the DeLonghi Dedica EC680/EC685. Might fit other portafilters with 3 knobs and a 51mm diameter too. The hanger can simply be attached to the side of the machine using two 3mm countersunk screws. Remove the top lid…
Saw blade cover stop, for easier cutting with guide rail. Prevents the cover from lowering than the saw table. Be careful and act at your own risk. I take no responsibility for personal injury or destruction of your equipment!
