P
Printablesthall72
Lego Compatible (3705.dat) Technic Axle 4L
This model is compatible with the lego system.
- Downloads
- 1,512
- Likes
- 80
- Rating
- 4.67
Search results: 705
Counting matching models…
P
PrintablesEA2W
Icom IC-705 Shield
NEW VERSION WITH FRONT COVER IS AVAILABLE HERE: https://makerworld.com/es/models/2585450-icom-ic-705-shield-v2-front-cover#profileId-2852226 Icom IC-705 protective shield. Available as single part or 2 parts for smaller 3D printers. For…
- Downloads
- 751
- Likes
- 62
- Rating
- 5
P
PrintablesDL2MAN
Icom IC 705 cage - next level !
Designed completely from scratch around ICOMs STL Model of IC705. It was printed and improved in at least 5 iterations until it was release-worthy. Housing is a tight fit and should protect IC705 in outdoor use from all sides without…
- Downloads
- 740
- Likes
- 54
- Rating
- 5
P
PrintablesOK1HRA
Icom IC-705 transport rugged box
Now available OPEN FRAME version! Two version Basic size with BP-272 battery Large size with BP-307 battery It is need for assembly 8 pieces of M3 x 30mm silicone sealant for sealing the joint
- Downloads
- 712
- Likes
- 101
- Rating
- 5
P
PrintablesKF0ARE
Icom IC-705 cover
A simple front cover for the Icom IC-705 based off their published STL model of the radio. You can add a strap if you'd like some more security but I didn't feel the need. I printed mine on a Markforged Mark Two in Onyx with Kevlar…
- Downloads
- 621
- Likes
- 42
- Rating
- 5
P
PrintablesVisualReversal
Dual Screw Mounting Brackets for Govee Permanent Outdoor Lights - Model H705
Made at the request of a Printables community member, these mounts are a traditional mounting bracket with dual offset screw points. These mounts are best used with typical flat bottom soffits. If you have angled soffits or rafter tails,…
- Downloads
- 599
- Likes
- 45
- Rating
- 5
P
PrintablesJordan
Ikea Kitchen leg METOD 705.560.67
Stabile Küchenfüße zum Nachdrucken – Universell & Robust Du suchst eine langlebige und stabile Lösung für deine Küchenmöbel? Diese 3D-gedruckten Küchenfüße bieten sicheren Halt und sind ideal für individuelle Projekte oder als Ersatz für…
- Downloads
- 564
- Likes
- 51
- Rating
- 5
P
PrintablesPyDesign
IC-705 Display Cover
IC-705 Display cover that slides over the knobs and protects the screen. Works with mounts that prevent access to the side. I tried some other excellent covers, but they required clips that wrapped round the edge of the radio and didn't…
- Downloads
- 530
- Likes
- 41
- Rating
- 5
P
Printablesliqwid
Power Supply and Controller Wall Mounts for Govee RGBIC LED Permanent Outdoor Lights H705A H705B H705C
The power supply mount is compatible with the 36V 2A PSU model SOY-3600200US-306 which comes with Govee RGBIC LED Permanent Outdoor Lights models H705A, H705B, and H705C. The controller mount is compatible with the aforementioned models.…
- Downloads
- 401
- Likes
- 18
- Rating
- 5
P
PrintablesSchumo
Mini Wheels - BBS RS2 Concave Version (RS 701 705)
I recreated some classic (JDM-)wheels. They're approximately 1:3 scale and have an diameter of around 13.5cm and a width of around 9cm. They're not a perfect copy as I drew them just after some pictures from the internet. Print them as…
- Downloads
- 369
- Likes
- 50
- Rating
- 5
P
Printablesolebor
Icom IC-705 Desk Stand - snug fit
A desk-stand for the Icom IC-705. This stand fits snugly around the unit and has dents for rubber feet. The rubber feet make sure that the device does not move, and the buttons can be operated without holding the device in place. The…
- Downloads
- 361
- Likes
- 20
- Rating
- 4.67
P
PrintablesOK1HRA
Icom IC-705 survival rugged box (size S)
Compact design ready to go Support for standing on a table Space for CW key or MIC BNC ntenna connector TRX 10W power output with aditional powerpack Powerpack rechargeable from USB-C Two size by powerpack UMAP 12000 revision B2 C3 For…
- Downloads
- 322
- Likes
- 98
- Rating
- 5
P
Printablesliqwid
3 inch Spacer Installation Tool for Govee RGBIC LED Permanent Outdoor Lights H705A H705B H705C
There are two versions of this tool provided: v1 - The tool pictured in the cover photo - This is the tool my brother and I used. It has a label so years from now you or whoever finds it will know what the heck it is. v2 Slim Edition -…
- Downloads
- 306
- Likes
- 21
- Rating
- 5
P
PrintablesmUSER
HP EliteDesk 705 G2 A8 under desk mount.
Simple mounting brackets for microPC. Can be printed standing or lying down. For lying down orientation please consider support placement proposed here in gallery. Design meant to use screws for desk mount and uses holes in PC case. Why…
- Downloads
- 304
- Likes
- 35
- Rating
- 4
P
Printablesseed49
Dell Optiplex 7050 Micro MFF Front Bezel / faceplate (face avant minipc)
I have a Dell Optiplex 7050 Micro with no faceplate and no power button. So I rebuilt it. Optimized print profiles for Bambu Lab printers available here:…
- Downloads
- 294
- Likes
- 35
- Rating
- 4.5
P
Printablestechfoamer
Icom IC-705 front cover
I wanted a lightweight cover to protect my IC-705 when it is in a bag with other objects. This cover includes stops to keep the cover from hitting the front panel knobs and two clips to keep the cover from sliding off easily. Can also be…
- Downloads
- 275
- Likes
- 30
- Rating
- 0
P
PrintablesOK1HRA
Icom IC-705 table stand
A chair stand that holds the IC-705 transceiver at a 27 degree angle. It includes stops against lateral displacement and the possibility of fixed screwing to the transceiver. I recommend gluing rubber feet on the underside to prevent…
- Downloads
- 269
- Likes
- 13
- Rating
- 0
P
PrintablesJavacer
Mechanic fast lock for Meiho Versus 7070 & 7050
Mechanic fast for Meiho Versus 7070 & 7050 Print with PETG
- Downloads
- 246
- Likes
- 6
- Rating
- 0
P
PrintablesLx
Dell OptiPlex 7050 MFF Faceplate Logo
Recently got a Dell OptiPlex refurb and the logo wasn't pristine. Gasp! Gave me the idea to model and print a new one. Since I installed Ubuntu on this machine, I thought it would be cool to have the Ubuntu logo on it. I've added 3…
- Downloads
- 240
- Likes
- 41
- Rating
- 0
P
Printablesliqwid
Gable Roof Peak Mount for Govee RGBIC LED Permanent Outdoor Lights H705A H705B H705C
This mount gives you a flat surface to mount a Govee light in the top center of a gable roof peak. I designed it to perfectly fit a roof with a pitch around 5.3/12 with the arctan(5.3/12) = 23.83 degrees. It should work fine for roofs…
- Downloads
- 237
- Likes
- 9
- Rating
- 5
P
PrintablesBen
2.5G Ethernet adapter bracket for Optiplex Micro 7050
Installs into the secondary display port, just above the built-in network and USB ports. Requires: 4x M3x4x5 heat-set inserts 2x M3x8mm countersunk screws Also uses 2 screws removed from the original metal bracket Potentially worth…
- Downloads
- 227
- Likes
- 25
- Rating
- 5
P
PrintablesFX82
ICOM IC-705 Akkudummy Batterydummy
The battery dummy closes the back of the ICOM IC-705 when no battery is to be inserted. The print fits very well and must be adjusted slightly with a file to hold it in place. Der Batterie-Dummy verschließt die Rückseite des ICOM IC-705,…
- Downloads
- 198
- Likes
- 15
- Rating
- 0
P
PrintablesSteve
IC-705 Antenna Stabilizer
This is a design I whipped up to provide stabilization for the BNC connector on an IC-705. It utilizes the ground lug and the little handle thing on the back to provide 2 points of solid connection. Print instructions I printed this with…
- Downloads
- 188
- Likes
- 20
- Rating
- 5
P
PrintablesPaul
Ryobi Handheld Vacuum Screw-in Wall Hook (for PCL705)
Use a couple of screws to mount this anywhere you want your vacuum at hand. You'll need a little force to pop it into place and remove it. Make sure your screws are flush! I also made a similar one for pegboard that doesn't have the…
- Downloads
- 187
- Likes
- 15
- Rating
- 5
P
PrintablesEvilProphet
ESRack - Module - HP EliteDesk 705
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
- Downloads
- 182
- Likes
- 24
- Rating
- 0
P
PrintablesFang64
Dual Stand for HP EliteDesk 705 G4 DM (possibly other EliteDesks/ProDesks)
This is a vertical stand to hold 2 HP EliteDesk 705 G4 DMs next to each other. It also is a parametric FreeCAD Model. I think it might work for other models possibly in the EliteDesk/Pro Desk line but it may require modification of the…
- Downloads
- 177
- Likes
- 25
- Rating
- 0
P
PrintablesDiesel Dummy
M705 Wall Mount
Just a wall mount for the Logitech M705 wireless mouse. I was doing some organizing and decided to make wall mounts for various items.
- Downloads
- 176
- Likes
- 26
- Rating
- 5
P
PrintablesOK1HRA
Icom IC-705 mobile rugged box
Available two version Basic size with BP-272 battery Large size with BP-307 battery What is need for assembly 8 pieces of M3 x 30mm 2 pieces screw of M3 x 10mm 1 piece screw of M4 x 12mm for TRX fixation Right BNC connector to TRX (…
- Downloads
- 171
- Likes
- 27
- Rating
- 0
P
PrintablesHA3JO TechFusion
Icom 705 BNC mounting bracket
I designed for my ICOM 705 this bracket, for solid antenna holding. Used material was PETG.
- Downloads
- 162
- Likes
- 9
- Rating
- 0
P
Printablesstickn_notes
Stand for HP Prodesk 400 600 Elitedesk 705 SFF
A vertical stand for the HP Prodesk / Elitedesk SFF models. It should work with any G3, G4, G5, G6 Prodesk 400 / 600, Elitedesk 705 SFF. Print settings: 3 perimeters PLA or PETG (I used PETG) 20% infill
- Downloads
- 159
- Likes
- 14
- Rating
- 5
P
Printablesthall72
Lego Compatible (70501a.dat) Minifig Coin with "10" Sans-serif Type
This model is compatible with the lego system.
- Downloads
- 156
- Likes
- 35
- Rating
- 1
P
PrintablesVC Design
Braun Mixer Coupling 4191 Part. 67050811
Print in Petg or ABS. The black rubber O-ring is stock
- Downloads
- 155
- Likes
- 30
- Rating
- 0
P
PrintablesSenonu
DeWalt Throat plate lock / cam / N705229
A cam / throat plate lock that fits several DeWalt tablesaws and can be used with a series of zero clearance inserts, such as the ones sold by Dulin on Cults3d. Also works with the original, of course. Based on DeWalt part number N705229…
- Downloads
- 148
- Likes
- 6
- Rating
- 5
P
Printablesanjoze
Light Switch 13870519 for BMW vehicles
This is the inside plastic of light switch. I have bought another in car spares and it was worst than mine. The design it's not perfect but it works very well and the light warnings stopped :) IMPORTANT, when assembling the part: Be…
- Downloads
- 141
- Likes
- 26
- Rating
- 0
P
PrintablesKB9RLW
IC-705 very portable table stand.
This is an ultra portable desk stand for the IC-705. It breaks down small enough to fit in a small envelope and take very little space in your go bag or back pack. Print two of the cross member parts, and two of any of the angled sides…
- Downloads
- 139
- Likes
- 20
- Rating
- 3.67
P
Printablesthall72
Lego Compatible (70501d.dat) Minifig Coin with "40" Sans-serif Type
This model is compatible with the lego system.
- Downloads
- 135
- Likes
- 33
- Rating
- 1
P
PrintablesAlison Foster
Dethleffs Trend 7057 Motorhome Waste Water Key
Waste Water Key for Dethleffs Motorhome Grey Waste, we have glued and put a screw in the tighten it (also put some duck tape on to make sure its tight) at moment its working very well
- Downloads
- 133
- Likes
- 15
- Rating
- 4
P
PrintablesPaukkulaakeri
Elitedesk 705 G4 Vented Cover
Model work in progress, not final Here is a top cover for the Elitedesk mentioned in title, this sports mounting for the front cover with two screws and attachment to the rear screw. Vent design can be customized by changing sparse infill…
- Downloads
- 131
- Likes
- 20
- Rating
- 0
P
Printablesthall72
Lego Compatible (70558.dat) Minifig Head Sesame Street Bert
This model is compatible with the lego system.
- Downloads
- 127
- Likes
- 18
- Rating
- 5
P
PrintablesOK1HRA
Icom IC-705 variably expandable rugged box
The modified box will allow you to transport everything you need for portable operation with the IC-705 transceiver. Antenna, power bank, USB-C power delivery adapter, headphones, antenna , telegraph key, etc. Since the bottom part is…
- Downloads
- 125
- Likes
- 16
- Rating
- 2
P
PrintablesPrintBAB
Replacement frontplate for HP Elitedesk 705
Replacement front plate for HP Elitedesk 705 - small desktop PC with holes for ventilation. Original clips to hold front plate are to small to print, plate has to be glued on front of computer.
- Downloads
- 124
- Likes
- 21
- Rating
- 5
P
PrintablesBeyond_Life
Playmobil Truck 2170534 Camper Flatbed
This is a camper add-on I made for PM-2170534 car. It's the blue pickup with yellow stripes from the speedboat set. I printed it with 0.2 layer height normal matte pla, and it's a friction fit if you paint it. I didn't make this to scale.…
- Downloads
- 123
- Likes
- 25
- Rating
- 0
P
PrintablesLemon Head
Rack 10" - 1U pour Dell Optiplex 7050 Micro
Rack 10" - 1U pour Dell Optiplex 7050 Micro En Fontion de votre rack je vous recommande de le fixer a l'arrière également ,le poid du dell 7050 peut etre important. joins en fichier l'extension arrière , mais a voir en fonction de votre…
- Downloads
- 122
- Likes
- 6
- Rating
- 0
P
Printablesthall72
Lego Compatible (70501c.dat) Minifig Coin with "30" Sans-serif Type
This model is compatible with the lego system.
- Downloads
- 120
- Likes
- 34
- Rating
- 1
P
Printablesthall72
Lego Compatible (70501b.dat) Minifig Coin with "20" Sans-serif Type
This model is compatible with the lego system.
- Downloads
- 119
- Likes
- 34
- Rating
- 1
P
PrintablesHalfwitTomfoolery
mAT-705Plus Tuner Case Add-On for ICOM IC-705 Case
Add-on for https://www.thingiverse.com/thing:4709792 This is a case for the mAT-705Plus tuner to allow you to attach it to the “Icom IC-705 cover V3” by basstoshawn. It uses similar mounting hardware to what you need for the handles,…
- Downloads
- 116
- Likes
- 6
- Rating
- 0
P
PrintablesJavacer
Magnet lock for Meiho Versus 7070 & 7050
The lock system for cover for Meicho Versus fishing boxes. Use magnets in caps 10*6mm Print instructions Use the 0.15 layer height or lover. Your can print with 0.2 layer, but thread is not cool quality.
- Downloads
- 111
- Likes
- 5
- Rating
- 0
P
Printablesthall72
Lego Compatible (70538.dat) Minifig Head Sesame Street Ernie
This model is compatible with the lego system.
- Downloads
- 109
- Likes
- 18
- Rating
- 5
P
PrintablesSGSDoom
ICOM IC-705 Microphone Wall Mount
ICOM IC-705 Microphone Wall Mount. I just used some super glue (cyanoacrylate) to mount it to the wall. Printed 30% with PLA. Printed base down. Print as per Cura Snapshot.
- Downloads
- 109
- Likes
- 9
- Rating
- 0
P
PrintablesSilver99
BBS RS 704, RS 705 cenral nut wrench
This wrench replaces the original part delivered with wheels. The original part is quite soft and sometimes is not easy to loosen the central nut. Also, I designed a new centre cap with a Mercedes star on a convex surface protruding out…
- Downloads
- 108
- Likes
- 8
- Rating
- 0
P
Printablesthall72
Lego Compatible (45705.dat) Windscreen 10 x 6 x 2
This model is compatible with the lego system.
- Downloads
- 106
- Likes
- 17
- Rating
- 0
P
PrintablesMaubror
Hp Elitedesk 705 G1 Wall Mount (VESA100x100)
I needed a model to hang my Elitedesk on the wall but didn't want to attach it permanently since i'm going to mount it in a tight closet. This way i can just slide it out if i ever need to plug something in. The standoffs need to be cut…
- Downloads
- 106
- Likes
- 9
- Rating
- 0
P
Printablesmgle
Protective cage for Icom IC-705 - by IU1OPK
Design by IU1OPK - for full details visit the page on Thingiverse :-) https://www.thingiverse.com/thing:5146730 http://iu1opk.com/my-projects/ https://www.shapeways.com/product/RCSDDB86K/protective-cage-for-icom-ic-705-unibody-improved I…
- Downloads
- 101
- Likes
- 15
- Rating
- 0
P
PrintablesMarc
Old Version 1: Replacement fix for BOSCH fridge door tray 00705901 // Ersatzteil Bosch Kühlschrank Türfach
I made a more sturdier new Version 2 which can be found her: New Version 2: Replacement fix for BOSCH fridge door tray 00705901 // Ersatzteil Bosch Kühlschrank Türfach I'll leave the old version here since it uses very little filament:…
- Downloads
- 96
- Likes
- 16
- Rating
- 4.8
P
PrintablesDO1XX
ICOM IC 705 Hamradio Transceiver Cover / Lid
I am happy to share the IC705 Cover here for other radio amateurs! I recommend printing it in PETG in case it gets a bit warmer in the summer, but PLA will also work if it's not in the sun or a warm car. 73! Please only for yourselves and…
- Downloads
- 94
- Likes
- 9
- Rating
- 0
P
PrintablesDenys Shevtsov
HP Mini PC Cooling fan attachment (Elitedesk 705, 800, etc mini)
So I've got my hands on HP EliteDesk 705 g4 mini pc. Wanted to use it as my home server. It had a AMD Ryzen 5 2400GE CPU, which is only 35w TDP, but still - under IDLE loads it would sit at ~55-65 C For some reason HP decided to not…
- Downloads
- 93
- Likes
- 23
- Rating
- 0
P
PrintablesPrusa_Heb
IC-705 Antenna Stabilizer for BNC male to female ellbow adapter
V01: for cylindric ellbow adapter (diameter 11mm) V02: for cubic ellbow adapter (dice 11x11x11mm )
- Downloads
- 90
- Likes
- 6
- Rating
- 0
P
PrintablesBAH
Govee H705 / H805 Series Permanent Outdoor Lights Mounting Brackets
Brackets for Govee H706C Permanent Outdoor Lights Pro Remix of https://www.printables.com/@Gelap https://www.printables.com/model/630613-govee-permanent-outdoor-lights-pro-mounting-bracke
- Downloads
- 85
- Likes
- 11
- Rating
- 0
P
PrintablesHamOp
TPU Gasket for IC-705 rugged box
Version 2 is the same height as a silicone seal made with the tool included in the original model, the other one is a little bit thicker for a tighter fit. Choose the one you like more. I printed mine with Overture HS TPU.
- Downloads
- 72
- Likes
- 10
- Rating
- 0
P
PrintablesMarc
New Version 2: Replacement fix for BOSCH fridge door tray 00705901 // Ersatzteil Bosch Kühlschrank Türfach
The mounting of the door tray failed on my BOSCH fridge. So here is a little Model to fix the broken mounting. This is a improved -more sturdier- Version 2. Printed with Prusament PETG Urban Grey . The print in the picture is from a MK4S…
- Downloads
- 67
- Likes
- 11
- Rating
- 5
P
Printablescolossatr0n
DW705 Dewalt Miter Saw 40mm (1.5 in) Hose Adapter
Hose adapter for 1.5 inch outer diameter hose to the DW705 Dewalt miter saw dust port. Length of hose insertion side is 74 mm. Inner diameter of hose insertion side is 1.5 inch, or 38.1 mm. Length of saw port insertion side is 36.5 mm.…
- Downloads
- 67
- Likes
- 8
- Rating
- 0
P
PrintablesМихаил Пряморуков
Housing icom IC 705
Housing and protect icom IC 705
- Downloads
- 66
- Likes
- 1
- Rating
- 0
P
PrintablesVisualReversal
Painting Tool for Govee RGBIC LED Permanent Outdoor Lights Models H705 (A, B & C)
This is a very simple model. It's just a tube with a bevel on the top that allows you to position it over the dome of your Govee Permanent Outdoor Lights so you can spray paint them to match the color of your house (or whatever reason…
- Downloads
- 66
- Likes
- 11
- Rating
- 5
P
Printablesstone
Nexa LYCT-705 remote wall mount
I didn't find a suitable holder for my needs, so designed one in Fusion 360. Printed in PLA. Used settings in PrusaSlicer: - 0.2 layer height - enable ironing on top surfaces for nicer finish - infill 10%
- Downloads
- 60
- Likes
- 3
- Rating
- 0
P
Printablesliqwid
Recessed Light Mounts with Optional Removable Covers for Govee RGBIC LED Permanent Outdoor Lights H705A H705B H705C
Note that there are two versions of mounts provided - One accepts a removable cover and the other has no removable cover ability. The one that accepts a removable cover has an annular ring on the bottom designed to help prevent any light…
- Downloads
- 59
- Likes
- 13
- Rating
- 0
P
PrintablesKB9RLW
Ic-705 hanging shelf.
This is a hanging shelf for the IC-705. The platform has a recess that matches the underside of the radio to keep it in place. I'm able to depress all front panel controls without the radio moving around. (As long as you're not stabbing…
- Downloads
- 53
- Likes
- 8
- Rating
- 0
P
PrintablesSQ9MDD
IC-705 MFJ-1699T antenna mount kit
Mobile antenna holder MFJ 1699T, mounted on IC-705 radio Category: Hobby
- Downloads
- 52
- Likes
- 11
- Rating
- 0
P
PrintablesKaosuNeko
Car speaker spacer podium 5 inch for GAZ Gazelle 2705
Car speaker spacer podium 5 inch for GAZ Gazelle 2705 Applicability: GAZ Gazelle 2705
- Downloads
- 52
- Likes
- 17
- Rating
- 0
P
PrintablesJon
Quick Connect Tripod Plate - SLIK(tm) SH-705E
Summary This is a tripod quick release plate for a SLIK SH-705E tripod head. The OpenSCAD and STL files for just the plate are available to use for other purposes, but this set of files includes a captive bolt that can spin freely inside…
- Downloads
- 51
- Likes
- 2
- Rating
- 0
P
PrintablesTaylor
IC-705 Peovi Carry Cage Antenna Mount
Designed using a BNC to BNC mount thing I inherited from my great-grandfather (I'm not sure where to find new ones) but I have also had success with one of these “OPEK OPSM1” 3/8-24 to SO-239 adapters:…
- Downloads
- 51
- Likes
- 8
- Rating
- 0
P
PrintablesTaylor
IC-705 Peovi Cage Stand
I had an idea one day for an antenna mount for my Peovi cage. The only problem was that my 705 wouldn't stand up straight when the extended battery was in. Several drafts later… Don't expect perfection here. I reached “good enough” with…
- Downloads
- 51
- Likes
- 5
- Rating
- 5
P
PrintablesAntonín Roll
Držák na zeď ICOM IC705
Džák radiostanice ICOM705 na zeď.
- Downloads
- 51
- Likes
- 14
- Rating
- 0
P
PrintablesDustin
Icom Attachable Mobilinkd TNC4 ID-52 / IC-705
Easily attach the TNC4 to the back of an ID-52 (Plus) or IC-705. Print Settings These are my experimental settings thus far. Filament: PLA NOTE : T he original clip model suggests using PC Perimeters: 4 Supports: Required on the build…
- Downloads
- 50
- Likes
- 8
- Rating
- 0
P
PrintablesOK1HRA
Icom IC-705 transport rugged box - Open Frame
OPEN FRAME , based on the closed version . It is not waterproof, but it is not necessary to remove the transceiver from the box, because all connectors are permanently accessible. The transceiver is fixed in the box with a one screw. BOM…
- Downloads
- 47
- Likes
- 4
- Rating
- 0
P
PrintablesWet4Killers
Dell Optiplex SFF 5040 5050 7040 7050 3 HDD caddy with fan
This is a remix of a thingiverse file to fit 3 hard drives. I made an optional 80mm fan bracket too. https://www.thingiverse.com/thing:5894917 Go rate the original if you like it. They did a great job.
- Downloads
- 47
- Likes
- 7
- Rating
- 0
P
PrintablesSilver99
W124 door window regulator outer plug A1109870544
Original rubber plugs A1109870544 are usually ruptured because their surface is deep under door surface. In some cases (on my C124 front adjusting screw) the screw is protruding out so it is impossible to mount original cap without…
- Downloads
- 47
- Likes
- 6
- Rating
- 0
P
Printablesbetucanprintthat
Ikea Metod Leg Extender (705.560.67) Raise Your Cabinets for Robot Vacuums!
Check my other IKEA designs: Ikea Metod Screw On Leg Extender (402.055.99) IKEA Metod Back 10mm Spacer Replacement (10036383 or 10039201) Why Do you have a robot vacuum that can’t clean under your IKEA Metod cabinets? The default 8 cm…
- Downloads
- 45
- Likes
- 13
- Rating
- 5
P
PrintablesKaobaishu
Icom IC-705 cover remixed
A remixed model of Icom IC-705 cover. The original model was designed by KF0ARE. Kudos to KF0ARE.
- Downloads
- 44
- Likes
- 2
- Rating
- 0
P
PrintablesArtur Motyka
HP Elitedesk 705 G4 Mini stand
Simple stand for hp elitedesk 705 g4 mini. It stays stable enough with one at front, but you should print two (one for front and one for back) to make it stable. Print Settings Printer Brand: AnkerMake Printer: AnkerMake M5 Rafts: Doesn't…
- Downloads
- 43
- Likes
- 3
- Rating
- 0
P
PrintablesKaosuNeko
centering shaft for clutch friction disc GAZ 2705
installation mandrel (centering shaft) for clutch friction disc GAZ 2705, 33021, 32213 (UMZ 4215, 4216 and compatible) Use plastic with high strength and high adhesion between layers: PLA, PETG. Category: Automotive
- Downloads
- 43
- Likes
- 8
- Rating
- 0
P
PrintablesKojakitchane
Gear Box Serpent rc 705/950/960/966
Gear Box for Serpent rc 705/950/960/966 -First Gear 48T -Second Gear 45T
- Downloads
- 40
- Likes
- 4
- Rating
- 0
P
PrintablesKevin
KAON Rear Roof Shelf GME AE4705B/AW4704B Antenna Storage Clamps
These clamps will hold either a GME AE4705B or AW4704B (they can be purchased as a twin pack AE4705BTP) antenna onto the KAON Rear Roof Shelf so that it's out of the way and secured in place. They are designed to allow you to quickly but…
- Downloads
- 38
- Likes
- 7
- Rating
- 0
P
PrintablesKaosuNeko
Bonnet support holder GAZ Gazelle 2705 3302
Bonnet support holder GAZ Gazelle 2705 3302 Original: 4301-8418126 Applicability: GAZ Gazelle 2705 3302
- Downloads
- 30
- Likes
- 5
- Rating
- 0
P
PrintablesHalfwitTomfoolery
IC-705 Add-On Stand with Speaker Mic Compartment
This is an add-on module for bastosshawn's IC-705 case ( https://www.thingiverse.com/thing:4709792 ) which adds a slight backtilt to the radio and gives you a compartment to store a speaker/mic. It bolts onto the main case using similar…
- Downloads
- 30
- Likes
- 4
- Rating
- 0
P
PrintablesMuffelkraft
Replacement Window for Gewiss GW27051 Watertight Electrical Enclosure
This is a replacement for the transparent window in the Gewiss GW27051 watertight electrical enclosure, commonly used for sockets. Printing it in clear PETG helps maintain the original look while adding durability. An additional benefit…
- Downloads
- 28
- Likes
- 11
- Rating
- 5
P
PrintablesNatas Bruins
Singer Heavy Duty 6705 insert and storage box
Insert and storage box for the compartments in the accessory tray from the Singer Heavy Duty 6705. Printed in PLA
- Downloads
- 28
- Likes
- 6
- Rating
- 0
P
PrintablesJoebee
Dewalt 705 0-Clearance Insert
This is a Dewalt 705 (older model) miter saw zero clearance insert. Print this part, assemble into miter saw, and make first cut for zero clearance slot.
- Downloads
- 27
- Likes
- 3
- Rating
- 0
P
Printablessascha
Svbony SV705C Cable Comb + Fan Mount
This is a versy specific model as it was made to fit an SV705C astro camera that doesn't come with a fan by default. The mount provides special clamping points to mount a special fan onto it while also providing a cable comb for cable…
- Downloads
- 27
- Likes
- 0
- Rating
- 0
P
PrintablesPrusa_Heb
AL-705 Magnetic Loop - fine adjustment variable capacitor
fits very well to the knop of the variable capacitor
- Downloads
- 27
- Likes
- 1
- Rating
- 0
P
Printablesrecrudesce
Svbony SV705C Cable Holder
I found that the USB cable on the SV705C is very loose, so it disconnects easily when the telescope slews. So I made this to provide a bit of stablity to the cable. This is friction fit, as in VERY friction fit. It's not coming off any…
- Downloads
- 26
- Likes
- 2
- Rating
- 0
P
PrintablesOle
Kawasaki 57001-1705
A tool to open the fork of your kawasaki kx 250 2018
- Downloads
- 24
- Likes
- 3
- Rating
- 0
P
PrintablesVolan
Woox R7051 Zigbee Siren Wall Mount
A simple wall mount for the Woox R7051 Zigbee siren. For use with home automation software like Home Assistant. Prints solid, backside down. No supports. Is taped to wall with double-sided tape. Has holes for cables and buttons. If you…
- Downloads
- 23
- Likes
- 1
- Rating
- 0
P
PrintablesJusPetBob
47053-1000 4-Pin fan header (470531000)
Instructions: You will need a 4 or more (just snap to size) pin header that can be inserted with a pair of pliers, than just remove the original plastic spacer and press them through until ~3 mm are out the back (just reference other…
- Downloads
- 22
- Likes
- 4
- Rating
- 5
P
Printablesjofeinmechaniker
Mic-Rohr kompatibel zu KESS Universal Funkkopfhörer 83705
Mic-Rohr kompatibel zu KESS Universal Funkkopfhörer 83705 Der große Ring wird mittels zwei 1,75mm Filamentstücken auf der linken Kopfhörermuschel geschlossen. (wahlweise verkleben oder verschmelzen) Gedruckt, Mat: PLA (PETG, ABS, Nylon…
- Downloads
- 22
- Likes
- 0
- Rating
- 0
P
PrintablesАлександр Косоногов
Minelab X-Terra 305 | 505 | 705 Control Box Mounting Repair Kit (Dovetail Mount), ремонт корпуса
This is a repair part for the Minelab X-Terra series (305, 505, 705). It is designed to replace the original broken mounting stem (the part that slides into the shaft bracket). If the original mounting post on your control box housing has…
- Downloads
- 21
- Likes
- 2
- Rating
- 0
P
PrintablesKaosuNeko
Plain bearing roller side door GAZ Gazelle 2705
Plain bearing roller side door GAZ Gazelle 2705 Medium side door roller Gazelle, Sobol (Sliding door support medium). Applicability: GAZ Gazelle 2705 Article of the original part: 2705-6426194-30 Part number for installation:…
- Downloads
- 21
- Likes
- 3
- Rating
- 0
P
Printablesnguyenkvvn
81731-17050/81731-17051 Gasket for Toyota Sera Turn Signal Light Lamp Winker
Print using TPU. These fit around a 81731-17050 and 81731-17051 lamp housings. It may fit other Toyota cars too of the same era that use these winkers.
- Downloads
- 20
- Likes
- 4
- Rating
- 0