Counting matching models…
This remixed part will serve as a replacement for the stock GoPro mount in order to provide a location for mounting 21x21 mm HGLRC M100-5883 GPS module on a SpeedyBee Mario 5 frame. GPS mount with GoPro v2: better fit and easier…
For better seating …. V2.1 Small Clamp has been reinforced
Harley Davidson Sportster 883
GPS mount for FlyFish Volador VX5 for the original antenna mount, compatible with all GPS units with dimensions of 21x21mm. No screws are required to mount the module. Print settings: Material - TPU Infill - 50% Walls - 3
This model is compatible with the lego system.
Replacement scales for the Ontario Knife pocket knife (Model: ON8838 Rat-1). Update: I added my solidworks file that I used to model this item, along with the tracing that was referenced for the measurements. Print Settings Printer Brand:…
I love to make useful 3D Desgins, and i love Coffee: Buy me a Coffee: https://www.buymeacoffee.com/phitscho Or Twint me something over 078 713 68 61 THANKS! GOKU GM10 Mini V3 GPS Holder for BOB75 Frame with a 32x32 M3 Mounting. How to…
Here is my gps mount that will fit any quadcopter that has a 32mm spacing back plate and 20 mm high standoffs. was designed for the AOS series of qaud copters but will fit anything that has a back spacing of 32mm. printed with ninja flex…
This model is compatible with the lego system.
This model is compatible with the lego system.
HGLRC M100-5883 M10 mount GEPRC MARK5 DC TPU
Mercedes Benz C124 Door Panel Clip. Pictures have 3D printed and broken original in comparison. Might not be perfect. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: Yes Infill: 100% Category:…
I needed an antenna and GPS mount for the AOS UL5, and thought I'd share it. This is for the O3 Antenna and the Matek M10-5883 GPS. Printed in TPU w/ 50% infill it came out under 5g This is a work in process, feedback is always welcome.
GPS mount for HGLRC M100-5883 + Source One V6 Print in TPU. Use 0.2 mm layer height, 30% infill, tree supports ON, build plate only OFF, remove small overhangs OFF.
Ho fatto questo modello stampato in PETG con un riempimento del 30%
A quick and dirty adaption of the Matek M9N-5883 holder for the 5" ImpulseRC Apex frame. Mounts the GPS out the back and at a slight angle. Use self-tapping screws or machine screws + superglue as a ‘threadlocker’. Can also put down a…
The Diatone Roma F5 DJI V2 frame kit comes with an included GPS and Immortal Antenna holder which is very nice quality and does a great job, provided you have the correct GPS (I think a BN220 fits it, can't remember exactly), but if for…
This GPS mounting bracket includes a strap to more securely hold the GPS module. Great for Drone or other uses where the GPS module could fall out. It also provides some isolation for the modlue from the chassis of the vehicle. Designed…
Philips CM8833 Monitor without ports and cable. Needs some supports.
lego 32028 4510 30586 4216 88393 4217 2653
This is a sizing blank.
GPS is hold by 2 tabs from the sides, it requires quite a lot of force to snap it in or out Version 2: Made it simpler to print and bowden printer by making print path more continuous It's more rigid GPS mount a bit tighter Print Settings…
This small adapter was made to make it easier to mount inexpensive AMG8833 Thermal Camera boards from Aliexpress into this case: https://www.thingiverse.com/thing:2799023 These cheap board have a smaller PCB compared to those sold by…
Mounts 20x20 GPS with no mounting holes slided into housing, screwed in 25x25 2.5MM holes.
This design was created by Matthew Byington over in the Home Assistant Community, I am simply sharing it here with Matthew's permission for others to use. Used as an optional housing for the Gas Meter Remote Reading project found here .…
From https://www.thingiverse.com/thing:2815310, by erdem03. Backup for when thingiverse offline, OEM no longer available
Made the mount using the original GoPro mount as base to fit my HGLRC m100 5838, made 2 holes in the front so you still see the lights. New version combine gopro mount and gps.
Simple Matek (http://www.mateksys.com/?portfolio=m10-5883) GPS module holder for Flywoo Explorer drone. After printing needs a bit of filing in order to tightly fit GPS module also it is capable to secure GPS with included heat shrink…
merged two designs to produce a battery/Gopro strap mount for the Matek M8q gps or whatever other thing you would like to fit in a 20x20x10mm enclosure intended to use with a strap 2cm wide Print Settings Printer Brand: Creality Printer:…
NATO/Picatinny Rail for Kowa TSN-883 Spotting Scope Use this to mount a red dot sight (reflex sight, finder) to your spotting scope. Includes FreeCAD source file in case you'd like to modify the part. Requires 2 pcs M4 x 20 screws with…
Dovetail Rail for Kowa TSN-883 Spotting Scope Use this to mount a red dot sight (reflex sight, finder) to your spotting scope. Dovetail type: 11 mm dovetail, 72° flank angle, 2.5 mm height Includes FreeCAD source file in case you'd like…
Nahradny diel . Tlačit odporúčam plné vrstvy a z PET-G.
GPS for a FlyWoo Hexplorer/Explorer, same position and mount as original, just allows you to mount a Matek M8Q-5883. Category: R/C Vehicles
Purpose This mount allows the Mateksys M10Q-5883 GPS & Compass module to be fastened to the Speedybee Master 5 v2 RC drone. It mounts the module to the drone's rear. Special care was taken to design the mount such that the module sits…
I print them solid. I use abs. I used these t bolts. https://www.amazon.com/dp/B0BYJP2GJW?ref=ppx_yo2ov_dt_b_fed_asin_title The rear bolt clamps down the weird thing in the groove , so the featherboard wont move into the blade. The front…
I made this small mast after finding that hard-mounting my GPS to the frame using this design ( https://www.thingiverse.com/thing:4057458 ) put it too close to the EMF of the controller/motors and threw off compass readings so iNav…
I designed this plate to upgrade the cheap spring loaded binding post in my Dayton 652-Air speakers. I used Pomona 6883 dual binding posts, but it may fit similar binding posts. (The 6883 has approximately a 3/4" center to center distance…
compact backpack for m8q gps (iflight or matek) and vista antenna Category: 3D Printing
NATO/Picatinny Rail for Kowa TSN-883 Spotting Scope (compatible to Weaver rail) Mount a reflex sight (red dot sight) to your spotting scope with this adapter. Minimal weight and bulk. Fits below Kowa stay-on case. Installation: Remove…
Remix from https://www.thingiverse.com/thing:3696205 Like Tuxar, I needed to get out from the fascia. His LNB4421 spacer was a great base, I just needed to add to the radius for my C883DA cameras and make it thicker.
Purpose This mount allows the Mateksys M10Q-5883 GPS & Compass module to be fastened to the Speedybee Master 5 v2 RC drone. Instead of mounting the module to the drone's rear, the mount moves it to the front. The main purpose is to get…
Holds the GPS module, in nice and tight without and adhesives or worry! NBD Inertia - SMA and standard DJI antenna mounts Mounted on a TBS SourceOne V5 in Pic. Printed in TPU - 3 Perimeter 30-40% Infill Check my profile for more upcoming…
Printed in TPU95A. I used 50% infill(grid). 0.2 layer height. 0.4mm nozzle. Cable from gps is abit tight to get into the channel for it, but it was more important to prevent too much flex.
Casing for ESP8266 with HMC5883L to clamp it to water meter for smart home data logging. Link to Project Wasserzähler Smart Home ESP8266 HMC5883L Print Settings Printer Brand: Anycubic Printer: Kobra 2 Rafts: Yes Supports: Yes Resolution:…
Volvo Penta Fitting 23238467 3883597 + key Material: ABS Infill density 100 %
This is a simple compass sensor holder for G4 RF1 kind of gasmeters with the magnet on the second decimal place (i.e. 1 Imp = 0.1m³). In my case it is a Pipersberg Actaris model - from my understanding other G4 RF1 models could be…
Stampato in PERG con riempimento 40%
These are the sealing caps for various Bosch, Siemens and Neff oven doors.I printed them on an SLA printer with HighTem
This model is compatible with the lego system.
A pole to move a Matek M10Q-5883 GNSS/compass away from interferences Install in the rear gps compartment of the Heewing T2 Cruza Designed in two part so that the pole can be unscrewed for transport Print with some support You will need…
A shorter mount than the original designs I remixed from for the Matek M9N-5883 GPS module that I am using for my iFlight Nazgul5 V2 but should fit other XL5 models. Category: R/C Vehicles
Replacement part for adding GPS to the Nazgul5 adapted for the Matek GPS M9N-5883 Category: R/C Vehicles
a 30x30 mount for a matek F411-WSE flight controller, a M8Q-5883 gps module and a VTX-HV video transmitter. fits into the sonicmodell mini ar wing. heavily remixed from https://www.thingiverse.com/thing:4438702
This print is a friction slide mount for the Mateksys M8Q-5883 . It can be hot glued to any desired surface. The design is parametric and can easily be modified.
print it in abs , you will need 4 M3 screws and 4 nuts you need to flex the part to put the gps in and then screw it in the frame
Needed a smaller drive so I could fit an SSD and an M.2 in my laptop. I've added the M.2 riser for a dell e5570 and the holder I remixed (https://www.thingiverse.com/thing:5161985) in case anyone else needs them (very specific use case I…
Case for a Thermal camera module. I designed it to be battery operated with an integrated type-c charger. Front and back panel (Sensorside.svg and Displayside.svg) are laser cut out of 3 mm acrylic. The red part of the svg image is…
Modelováno a tisknuto pro kamaráda z TPU.
I needed a reference model for a project I was working on. Sharing it here for anyone else that might need it. NOTE : This is not an official Adafruit model. Positions and sizes of the components are not precise. It should be a good…
Sleutelhanger van L.A.C. Frisia 1883
BASIC MODEL SINCE I COULDN'T FIND IT ANYWHERE POMONA 6883 BINDING POST
I used 6x3mm neodymium magnets, stacked 2 deep in each hole to hold the nozzle into the spindle mount. This adapter was designed to be used with an Atrix Omega Supreme HEPA Vacuum Clean Room Fine Particle Vac. I imagine other vaccums…
This model is a direct replacement for the cappuccinatore cover used on the Philips Saeco Syntia Cappuccino series. The original chrome‑plated part is known to flake, peel, and degrade over time , especially due to constant exposure to…
A mount for the Matek M8Q-5883 which uses the sma Mount Category: R/C Vehicles
A simple box / storage container for a OM SYSTEM WS-883 Digital Voice Recorder that also has space to store two spare AAA batteries.
the pegs are press fit, if you want you could put a little bit of glue in there to help secure it.
Mount for https://www.sparkfun.com/sparkfun-grid-eye-infrared-array-breakout-amg8833-qwiic.html. See https://codeberg.org/uwearzt/freecad/src/branch/main/lab/gridfinity/grideye.FCStd for the original model
This is an adapter plate to mount a 5065 outrunner to the spindle of a Carbide 3D Nomad 883 Pro. The motor is a Flipsky 5065 sensored outrunner. It has an 8mm shaft and I used the stock Nomad to mill out an adapter from 6mm aluminum…
I wanted a case to keep it from getting dirty when transporting it on my person
Purpose This mount allows the Mateksys M10Q-5883 GPS & Compass module to be fastened to the Speedybee Master 5 v2 RC drone. Instead of mounting the module to the drone's rear, the mount moves it to the front. The main purpose is to get…
Purpose This mount allows the Mateksys M10Q-5883 GPS & Compass module to be fastened to the Speedybee Master 5 v2 RC drone. It mounts the module to the drone's rear. Special care was taken to design the mount such that the module sits…
This print is a friction slide mount for the Mateksys M8Q-5883 . It can be hot glued to any desired surface. The design is parametric and can easily be modified.
Mount for https://www.sparkfun.com/sparkfun-grid-eye-infrared-array-breakout-amg8833-qwiic.html. See https://codeberg.org/uwearzt/freecad/src/branch/main/lab/gridfinity/grideye.FCStd for the original model
A simple box / storage container for a OM SYSTEM WS-883 Digital Voice Recorder that also has space to store two spare AAA batteries.
GPS mount for HGLRC M100-5883 + Source One V6 Print in TPU. Use 0.2 mm layer height, 30% infill, tree supports ON, build plate only OFF, remove small overhangs OFF.
Bloomberg Dishwasher 175883 Start Button Replacement, this gets glued onto the clear display case. This only replaces the start button, slight modification to the model would be required for the other buttons. The case is made of PP, so…
“I f you enjoy my work and would like to support me, consider contributing .” This is my UPI ID — mahendraguptha.97@oksbi This Model Is used for holding a GPS mount for an FPV drone
Yes, mini drone motors and DRV8833 motor driver could be superglued together without any help. But that would be always slightly different robot bases. The 3Dprinted part gives motors and motor driver a defined position to superglue to.…
Historical Figure Art - Franz Kafka 1883-1924 3D printable model.
Historic Figure Art - Franz Kafka 1883-1924 3D printable model.
Riser ARM for GPS A 15cm riser arm for M8Q-5883 GPS module used for Hobbyking X525 quadcopter frame. I had very bad case of magnetic interference for compass embedded in the GPS module, therefore needed to raise it a bit. This arm raises…
This latch broke on my vaccum and I didn't want to order a whole new neck for it (~$50) so I designed a replacement.
