Counting matching models…
This set of “executive-size” (45mm) checkerboard squares is a simplified, frameless variant of Martin_au's larger modular modular tournament-size board . Interlock any number of squares to create a custom checkerboard grid. Common…
Print approx. €2.00–€2.45 excl. taxPreliminary estimate for one variant
Replacement radiator valve knob. Open design with 4,5 mm mark. Common in old Prague appartments. Added a slot for a coin to spread the stress. Previous version got punched through into the infill. Compatible with: 1 CZK coin 0,10 EUR coin…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for one variant
No support is required if pot and feet are printed separately. However, both parts must then be glued together. A model has also been added where everything is in one piece, support is required here.
Print approx. €4.61–€5.64 excl. taxPreliminary estimate for one variant
Ersatz für eine alten Ablauf. Einfach zu ersetzen. Kann von Personen betreten werde. Auto oder sehr viel schwereren Gegenständen nicht getestet. Gedruckt in PETG, mit 3 Außenkonturen und 15% Gyros Infill. Außenmaße: 138mm x 138mm x 14mm…
Print approx. €6.26–€7.65 excl. taxPreliminary estimate for PETGSource material: PET
Imagine never spilling powdered detergent again or guessing how much you're using. This compact and durable 3D-printed dispenser gives you full control and consistency with every load of laundry. This system is built around a TR48x12 ISO…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Ložisko z-axis-trapézové matky motorů
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
A little support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.
Print approx. €0.30–€0.37 excl. taxPreliminary estimate for one variant
Added two versions. Both have the same dimensions (14cm x 8cm x 15cm), only the wall thickness is different. Normal 2mm Slim 1mm
Print approx. €8.85–€10.82 excl. taxPreliminary estimate for one variant
M8x1 fitting adaptor for use with professional grease guns - for 8mm linear bushes like LM8UU
These pads help to grip and spread the force of guide rail clamps on a workpiece, when used outside of their normal function. This way they can be used on materials such as soft woods with less risk of marking the surface. Designed to fit…
Print approx. €0.65–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
Frame for picture (188x126mm). For attach a photo to frame i used tape. In slicer you can change dimenson of whole frame
Print approx. €2.28–€2.79 excl. taxPreliminary estimate for PETGSource material: PET
This is a four-piece 8x12 checkered grid of 30mm squares, for playing the extra-wide and extra-fun game of Courier Chess. If 30mm squares are too small for you, then consider my Executive-size Modular Chessboard (with 45mm squares) or…
Search the web, and could not find a functional bearing with this dimensions. So I create one in a simple way and for fast print. The bearing has no rolls inside. The inner ring has a tap, so it could not fall out. I printed the bearing…
Print a Hextraction board on your Prusa Mini+! Print two of the A sections and two of the B sections to replace the standard 5-15 and 5-7 plates. Five of the original clips are needed, as well as two of the slightly modified clip included…
🧶🧶🧶 To make a color pattern, you will of course need automatic filament change . I did not use more than 2 colors (for the pattern itself) For coloring, I select fill and set the maximum Smart fill angle . I specify the needed loops;…
I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc), I started getting approached by people wanting one of equal quality for the Minox 8x11…
Miniature picture frame (~35 x ~40mm outer dimension) with an integrated stand that works for both portrait and landscape. Area inside the frame fits an 8x10-ratio picture. Picture is held in place by a small ledge. Prints fine without…
Hello everyone, Token holder remix for Paleo found on Thingiverse (by Lubi90 April 12, 2021) I have changed the place for the dice so that the dice 18x18x18 can now be stored (e.g. Polish version of Paleo Boardgame have dice in that…
Made this for larger prints and added a few holes to hook into a small nail or photo hanger. Should fit an 8 by 10" photo perfectly if your printer prints to size accurately. You can measure after the first layer goes down if you're…
Small tapes holder for Honeycomb Storage Wall. Designed for tape rolls 15mm wide, and with 38mm internal diameter (e.g., electrical tapes). Attaches to HSW M3 insert with an M3 metric screw (requires also an M3 hex nut). Inspired by…
Da ich nix vergleichbares gefunden habe, habe ich selber einen Rahmen erstellt. Der Rahmen ist schlicht und zeitlos. Bilder können einfach eingelegt werden. Der Clip kann mit zB Tesa Powerstrips an der Wand befestigt und der Rahmen drauf…
Play Fair! Referee cards with the profesional size 80 x 110 mm Thickness 1.5mm Have fun printing
Lego road plate 8x16 brick - from new Lego City. Not 100% accurate to the original but fits. The posted photo - extruder 0.2mm and 0.2mm layer height. I tried to print it upside down to get nice flat top. However the recessed studs with…
I have some OpenRC F1 cars that are only being displayed and won't be driven (anymore). I didn't want to waste actual bearings by having them sit on the car, but the bearings are required for the wheels and axels to fit together…
STL's and Bambulab 3MF files are both included! This is a remix of the Bambu Logo-Multimaterial AMS Rugged Box Remix. I scaled this up 150% and added a Spiderman face inside and outside the lid for my grandson. there is also a blank lid…
I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc), I started getting approached by people wanting one of equal quality for the Minox 8x11…
Collection of screws (ISO 10642 / DIN 7991) including : M8x 8, 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If…
Bitte sorfälltig bis zur letzten Zeile durchlesen: Gedruckte Gehäuse für Sinterbronze Gleitlager in Fest- und Loslagerausführung. Der 14mm CAD-Gehäuse-Bohrungsdurchmesser ist auf 14.10mm Spielmaß konstruiert. Beim Festlager sollte das…
Wall mount for Hikvision doorbell DK-KV8x13, 45 deg. You need four M3 brass heat insert nuts.
This was a proof of concept to design a completely self printed picture frame for hanging on nails or screws on the wall. It has a score on each side to auto align to the nail or screw. Every part needs to be printed 1x exept for the…
Box - outer max dimension 190.2x187.89x34mm - inner max dimension 180x160x30mm Video with disassembly: Used screws: no screws needed 3D printing settings Layer 0,1mm for no supports (0,2 with supports - use organic tree 25°) 4 walls…
VESA 75x75 adapter for the small arm system from RostaP's Multifunction Arm mounting system. The adapter can be screwed onto any 18x18 M4 holder piece using 4 M4x12 screws, then attached to a VESA 75x75 device (also using M4 screws). I…
after downloading lots of nuts and bolts in "ISO Metric profile" and not finding any that fits after print I decided to make my own set from scratch and her is the result for 8mm (M8x1.25 ISO Metric profile) / 13mm spanner
It is a copy of a double-ended wrench organizer (6x7-8x9-10x11-12x13-14x15-16x17-18x19-20x22mm). I replaced the original organizer of the combination wrench set with this one for the set of double-ended wrenches. This other organizer…
I did this remix to mount accessories into the 3030 profile for Prusa. There is two files: for M3 screw and for M4 screw. Regards! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 40%…
The adaptors included in the Aqara thermostat pack did not fit my valve thread. I've made this adaptor and it works fine with the included plastic extender. I've printed my part with a 0.6 nozzle since my 0.4 just broke down but it turned…
A rugged stackable gridfinity box. The base is smaller so it can also fit on a mini printer. 4x4 of 36mm base dimensions instead of the 42 mm base and 105mm interior heigh (aprox 18x13cm total box). Printed at 0.24 leyer height. You can…
ROUND SHIFT KNOB FLAT TOP M8X1.25 THREAD
just print and cut simple as that! Dart Tips: please print in TPU anything else and you risk serious injury or damage to anyone or anything the tips hit. (meant to only print and glue onto the cut ends for practice or simple shooting to…
Hallo, anbei Abschluss, Innen- sowie Außenecke für die Skandor FU060L Sockelleiste / Fußleiste, welche ich bei Hornbach erworben habe. Es passt wunderbar und ist auch nicht zu wacklig. Hello, please find attached the end, inner and outer…
I tried a few, but they were too weak. This model attempts to put the material so that even if the print breaks, it should still keep material between the ridges.
Pour impression en TPU. La version avec support GPS est prévue pour un GPS de dimensions: 18mm x 18mm x 8 mm
A rugged stackable gridfinity box. This one has a smooth lid. The base is smaller so it can also fit on a mini printer. 4x4 of 36mm base dimensions instead of the 42 mm base and 105mm interior heigh (aprox 18x13cm total box). Printed at…
I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc, etc), I started getting approached by people wanting one of equal quality for the Minox 8x11…
Remixed the mount for a smaller GPS Category: 3D Printing
redukce M18x1,5 vnitřní na G1/2" vnější
With these two parts you can connect your M30x1.5 smart Moeshouse Tuya actuator to M28x1.5 radiator valve. It is a simple M28x1.5-M30x1.5 adapter between the radiator valve and the smart actuator. And a plastic spacer to overcome the…
This is a revision of a nice DM Screen. The only changes I needed to make were to resize to use some existing 8x10 chipboard. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: .2 Infill: 100…
Pretty self explanatory, its a bolt with handle and m8x1.25 thread. I printed it at a 45 degree angle with tree support in PLA+ and it held up pretty good. Threads got worn after a few times screwing it in and out of metal threads but…
There are basically 2 mods available here, in 3 variations… If you want to upgrade the screen to the SH1107 128x128 OLED and add COB WS2811 LED strips, then use the “Modified_3dmonkey_semismart_SH1107_COB_LEDs-v1.6.zip” file. If you want…
In this Remixed version of E3Ds “Edition 2” mount, i added an M8x1.25mm thread to the top so you can use Prusas stock PTFE fittings. The clear benefit of the original fitting is, that they are much more durable. The Push-connector in the…
Spüler Schraube M8 x 1,25 links kompatibel zu HE Home Electronics HEDW 44004 vielleicht auch zu anderen Modellen. Bei der Demontage des Propellers zur Reinigung dessen hab ich nicht daran gedacht das die Befestigungsschraube ein…
Simple mask to use for prints. Better with higher infill to make it a bit heavy. Print five "doors" to use it as test strip maker, glue handle on top. How I Designed This…
Orientation of the Walksnail M181 will be CW0FLIP in betaflight for correct compass orientation. Make sure to follow Betaflight's magnetometer calibration before flight to ensure GPS is set up properly. No extension: Won't have the extra…
This enables you to connect a PC4 M8x1.0 pneumatic connector to a M8x1.25 thread (which incidentally is what the Prusa Mini uses). The internal clearance is 4.5mm, which in other words makes it very suitable for a thru-connector which…
Material PETG Sterngriff M6 * 10 Unterlegscheibe 6,4 * 20
This simple adapter has an M8x1 iso metric thread on one side, and a BSP pipe thread G1/8-28 on the other. For reference, the BSP thread is close to being an M10x0.9 thread. Why did I make this? Because my bowden tube kept slipping out of…
Case for 1,5" 128x128 OLED Shield Screen Module SH1107.
For landscape use 2 lower pieces and 1 side.
Case for an 8x1 MAX7219 display powered by a ESP32 Lolin C3 Mini. Build with retention fit for the display and alignment pins for the top case, a cut out for the ESP32 USB-C connector. Almost all USB-A to USB-C cables should work because…
8x10 inch easel for darkroom photo printing, with several frames for different image crops. This is designed to be printable on a Bambu A1, using 255.5mm of build space in one dimension. The default sets all use ½ inch borders. You can…
A rather large box made for a wroom32 ESP32 dev board together with a 1.8 inch TFT display at 128x160 pixels. The box is big enough to use breadboard cables to connect the screen to the ESP. Grooves for miroswitches 6x6mm on the sides.…
M68x1 threaded dust caps, male and female, for astronomy. These threaded dust caps are useful for astronomy cameras, telescopes and adapters. This thread size is often used on telescopes such as Zeiss, Baader, ZWO, Askar, etc. I print…
T-track Stock. 9 inch (228 mm) length Perfect for woodworking jigs, sleds, assembly tables, CNC, downdraft or other work table tops. Fits in a .75" x .375" dado (19.1x9.5mm). Use #6 tapered head screws for instillation. Hole spacings are:…
need two, printed in PLA 0.15mm structural all standard setting
Adaptor supplied (M28x1.5) were too short for my radiator. Printed in PETG 0.2mm
178x178x178mm test model wall 0.8mm
Dispensador de bebidas para latas de diámetro 58 mm y un largo de 145 mm Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.2 Infill: 50 Filament: FERVI ESENCIAL PLA BLANCO HUESO Notes: Apoyos…
8x10 back for the Sinar 4x5 P system (and horseman) see enclosed stl's and fusion files. Its smart to look at the cones and adjust so that you avoid vignette (to much extension needed on the Sinar 4x5) and at the same time that it matches…
This is a remix of Emotiva's "Shift Knob with Mazda Batman Logo M10x1.25" . I really liked his design but the automatic shift knob on my 2006 (NC) Miata uses a M8x1.25 thread pattern instead of a M10x1.25 like the manual NB Miata he…
Print two of these, print two more mirrored. Plop them down into a IKEA samla, the one that is 39x28x14cm (Article number 401.029.78). They will neatly divide the space into 8 compartments.…
Thinner Haptic slider (for 8x1mm magnets) I advise using some glue since the insert is thinner tough it is not neccesary
A frame to hold an 8x10 sheet of glass with 6-32 mounting screw holes
A simple tape measure spool with a ball bearing (8x16x4) for smooth operation. My tape measure is 1.5m by 15mm. The slot to stick the end of the tape measure into is 1.2mm thick.
This is one exposure - glass plate or aluminum plate - 8x10 inch plate holder Print slow with at least 5 layers and heavy on the infill - PLA+ works well Tabs on top and bottom help keep this thing on the plate while printing - I also…
A simple remix for 15-18mm door width. Happy printing.
wanted to use the lens that was on my speed graphic on my intrepid 8x10 but also didn't want to take it off of the speed graphic board as I still use it there. So a few searches and some trial and error later we have this. I probably…
There is a small test piece to check that it is the right size. Print upside down without supports.
Ich suchte für meine Sockelleisten Winkel und Endstücke um schadhafte Stellen auszubessern. Leider gab es die nur zum Stecken, was in viel Frickelei und Arbeit enden würde. Hier nun eine einfache Version zum kleben. Neben 90° Innen und…
I wanted something less cumbersome than a box in a dark bag for changing film, also wanted something more sturdy that I wouldn't worry about sharp metal/glass corners cutting the film bag and letting light in.. Printing is pretty simple -…
An adapter for the uponor hydroscopic floor-heating system to be able to use click-on actuators. Screws directly to the stock before you click on the actuator. Fits all the different click-on actuators i have tried, including the original…
First layer test model for A1 Mini or any printer with 18x18cm build plate. Model drukuje sie niecałe 20 minut na A1MINI,więc to mało czasu a można sprawdzić swoją pierwszą warstwę.
It is a big surprise for most who did not assemble "Prusa Mini +" kit that there are actually three bowden tubes involved in the extruder block. One for filament loading hole, another one from extruder output to hotend, but there is third…
What it is I found this model and thought it would make a good Tiny Whoop box, so I made it 32 mm shorter to better fit the inserts I designed. Credit The original model is by @PaulMostioru_1755420:…
Lens board blank for Burke and James 8x10 Commercial View Camera. Bottom edge is beveled like the original wooden lens board. You'll need to modify the design (add the hole) to accommodate your own lenses. I recommend printing with a brim…
How a hollow bushing connects and the holder is produced can be seen below: https://nerd-corner.com/using-a-barrel-jack-as-a-switch/ or https://nerd-corner.com/de/hohlbuchse-als-schalter-verwenden/
Pequeña cajita para accesorios: 80X18X16 milímetros con cierre. Los ejes de bisagra se hacen con filamento. Las paredes son de 1mm de espesor. El archivo de impresión incluye las 2 piezas. Con boquilla de 0.4 y a una velocidad de 60mm/s…
2 pieces for 18x14 photos. With PrusaSlicer you can edit the dimensions for your photos. I seperate the original into 2 pieces to fit into my printer (Prusa Mini+).
I'll display below the original instructions of 3DPrinty Printing This model is very small and requires accurately printed clearances to work as expected. Print slowly and avoid brittle or inconsistent filaments. Assembly Press fit the…
The assembly video says using two springs is ok, but I was afraid they'd get bound up. I came up with this little coupler to join two 18x100mm springs, while keeping them centered on the guide rod. I printed mine in leftover PETG-GF, but…
Two-piece film holder/guide for scanning 8x10 film on the Epson scanners that support 8x10. Main part - film guide: There are two parts to this guide. One part, called BottomGuide, is placed on the glass and an 8x10 negative will fit in…
PCB Mount 8x12cm 22gr on 0.2 20% infill 2 walls M3 mountingholes (6mm max thread + pcb) Ventholes below. Prints without supports Chamfer of any inner corner See my other pcb mounts for other dimenions. Category: 3D Printing
I am still testing this but it fits my Cut sheet film holders. Easy to read "X" side means no image on that side. "O" is the side an image will be exposed. Estimated image size 92mm x 246mm (3.6" x 9.7") With an Aspect Ratio of 2.69:1 The…
Printmaterial: PETG Settings: 15% infill 0.25 mm layerhight Supports: Yes, as shown in the picture Printer: Prusa mini + Printtime: ca. 3h 30min ------- HAPPY PRINTING :-) ------
Transfer your 810 sheet film holder to 410 film holder. You need 0.2mm thickness double sided tape (10mm width) to attach it to your 810 holder. Place the tape into the blue gap (according to the picture). Remember to double check the gap…
Building a microscope isn't that difficult, and there are many tools and resources available for this, but it can seem a bit daunting for the beginner, especially when it comes to the optics. To make this a bit more accessible, we wanted…
IKEA Skadis mount for the small arm system from RostaP's Multifunction Arm mounting system. This is a remix of the screwless version of LayerCake's IKEA Skadis Xbox One Controller Holder , modified to mount to any 18x18 M4 holder piece…
![[Drop-in T-Nut] [M3 M4] for 3030 profile (8x16mm)](https://media.printables.com/media/prints/167112/images/1554552_ed444b7d-d86d-4ff4-b1f1-e01709364a83/large_display_img_20190903_233919_167112.jpg)
