Counting matching models…
In celebration of the 40th Anniversary of ALIEN. I bring you a 1:1 scale Incinerator Unit Model Kit that I crafted in Fusion 360 resembling the unit from the film. (I have always wanted one!) "I am still improving this kit, so some parts…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
1979 Chevrolet Camaro & 1979 Pontiac Firebird — two icons from the same era. Two closely related American muscle cars, reduced to small, clean objects that keep their distinctive shapes and character. The Mini Cars DUO series brings…
About model My custom design of armrest plug for front seats in Volkswagen T4. Made for a friend's Multivan. Compatibility For T4 Multivan / Caravelle / California. Model year: 1996 to 2003. Diameter: 35 mm Modifications I optimised…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
UFO from the French film Le Gendarme et les extra-terrestres / The Troops & Aliens / Četník a mimozemšťané (1979). The model is composed of three parts. You can insert an LED candle inside the model or you can use glue to join parts. I…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
Yamaha FS1 (mod 378) 1973 - 1979 scale 1:8All axes = PLA 1.75mm Velg only: without support Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 220 Filament material: PLA
A giant version of the controversial McDonalds coffee stirrer. Prints in 6 parts + pins. Includes all parts, with pins and instructions. Happy to answer any questions you may have.
I created rails for the Traxxas Utility Trailer #9795 which fit relatively tight into the Trailer and can be taken off if need be.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Honda MT50 year 1979 Spoke rim only: without support Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 - 220 Filament material: PLA
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The model can be printed in 4 parts and bolted together using the groves in the back of the parts. there are parts for doing so. The long rails have inserts for nuts. If you have larger printer, you can print it in two parts probably. the…
This is a new modeled track for the matchbox railway from 1978/1979. It is almost compatible with the original track. It does not fit to 100% but it works fine.
After buying my pickup 5 years ago without a window crank knob I finally decided to fix the problem. Here is my solution to replacing a broken crank knob. Needed material: Qty:1 Window Crank Knob (3D printed) Qty:1 Washer (3D printed)…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
After breaking a lot of stock chopsticks, here is a reinforced edition. It is also more precise and limits the play at the wheels. Choose the right STL version for your balls : 3.4 - 3.5mm are for stock plastic hub carriers, and 3.5 -…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a larger bumper than the stock one to protect your front drive train while driving your car fast. It can prevent breaking the turnbuckles, A-arms or steering hub carriers in case of front impact. This is compatible with WLtoys…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The Warriors - Swan - 1979 3D printable model.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Salem's Lot - Barlow - 1979 3D printable model.
The original design is practically perfect, the best I've found online, so I wanted to modify it by adding lids to the boxes to allow the game to be stored vertically. I also added a small removable box to store the coffee planes and…
These are a set of very cool looking drift tires for the Wltoys A979B. This may also work for the non B version or other cars with a 7mm hex. I printed the rims with white PLA and used 4 walls. The wheels are printed in TPU. When the fit…
Lego Army Volkswagen Iltis 1979
The Warriors - Cochise - 1979 3D printable model.
1/18 Scale 2x4 trailer side rails for the Traxxas TRX-4M (TRX4M) trailer, P/N: 9795. Rails slip into the post holes on the trailer. Print two ends and two sides for a full set. I printed them with Inland Wood PLA filament for an authentic…
The Warriors - Cleon - 1979 3D printable model.
Buck Rogers in the 25th Century - The Searcher - 1979-1981 3D printable model.
Not my files. Reuploaded for my collection. Thingiverse thing:5752997 by JoKneeMo
Apocalypse Now - Captain Benjamin L. Willard (Martin Sheen) - 1979 3D printable model.
Alien - Science Officer Ash - 1979
This is a set of files for improving the steering angle of the Wltoys a979 (also for a959 and a969). This model's steering system articulation is way too low and the wheels may only turn 10-15 degrees most which causes the turning radius…
Sci Fi Movies - The Black Hole - U.S.S. Cygnus - 1979 3D printable model.
Alien - Executive Officer Thomas Kane - 1979
Alien - Captain Arthur Koblenz Dallas - 1979
Alien - Navigator Joan Marie Lambert - 1979
Alien - Engineering Technician Samuel Elias Brett - 1979
Apocalypse Now - Colonel Walter E. Kurtz (Marlon Brando) - 1979 3D printable model.
Winner, 1979 Grand Prix of South Africa, driven by Gilles Villeneuve The 1979 season would turn out to be Villeneuve's best in Formula 1. The arrival of the new 312T4 in South Africa brought with it victory for Ferrari and the young…
Alien - Chief Engineer Dennis Monroe Parker - 1979
The Jerk - Navin R. Johnson (Steve Martin) - 1979 3D printable model.
IMDB says Buck Rogers was a superhero.
This custom-designed 3D-printed model offers a practical solution for storing Allen keys or hex keys, specifically designed for the Wiha Ergostar MagicRing Hex Key Set (41979), perfectly fitting into the Ikea Skadis system. Printed with…
Wltoys A959 series have 7mm hex which is not very common. There are various wheel alternatives with 12mm hex. This part enables the use of 12mm hex wheels with A959 series.
Front tank bracket for Honda XLR XLS 125 1979-1990 Honda Original part Honda: 17611437000 Printing in TPU - PETG - ASA 100% infill
Awesome, you can try printing it, but you will have to separate parts mostly for show. Please check out my other models and like!
Read more at: http://www.drracer.eu/3dp/20160225_vortex/index.html (in English)
Apocalypse Now - Willard Emerging (Martin Sheen) - 1979 3D printable model.
Ash constructed the Motion Tracker as a tool to help the Nostromo's crew protect themselves against the eponymous Alien in the 1979 Ridley Scott film. In reality, this prop was built from a Panasonic Ranger 505 portable TV covered with…
Cookie stamp Pi 3,14159265358979323846
Doctor Who - Mandrel from Nightmare in Eden Episode- 1979 3D printable model.
The 3D Printed Air Intake Tube for the 1979 Lincoln Continental is a modern innovation designed to enhance the performance of this classic vehicle. Crafted through cutting-edge 3D printing technology, this intake tube represents a…
A simple Gridfinity organizer for the Wiha 75979 36 Piece GoBox Electronics ESD Precision Micro Bit Set. (https://www.amazon.com/Wiha-75979-Piece-Electronics-Precision/dp/B0BLTNKRQ6)
Made from pics I found & liked. Models may not be perfect. Made to 150mm (may differ due to pose). Made in STL & 3MF.
I've used a few rear hubs and found that they didn't work, either by being too weak, having the wrong sized holes, or being incompatible with ball bearings. I whipped these up and they work great. Note they may not fit the a9x9b series.…
Custom plate using SF Sports Night font for team 97934X
While designing a custom bezel for a unique shifter setup in my car, I modeled this, a fully 3D printable recreation of the original Ford piece. The bezel prints in 3 parts- the main body (white in the image) and the two "posts" (red)…
This is a Chromaphane of the 1979 Alien Movie Poster made using Lithophane Maker's Lithophane Maker Desktop software (LMD). A chromaphane is a type of filament painting (yes, it is similar to HueForge), but the way a chromaphane is…
Ash constructed the Motion Tracker as a tool to help the Nostromo's crew protect themselves against the eponymous Alien in the 1979 Ridley Scott film. In reality, this prop was built from a Panasonic Ranger 505 portable TV covered with…
Replacement 3D printable choke arm for 1979 Honda CB650 motorcycle
A9x9-20 Servo Arm spare part for Wltoys Print Settings Printer: forkLIFT MK1 Rafts: No Supports: No Resolution: 0.3 Infill: 100% Filament: 3DFila PETG Golden Notes: Printed with ABS outlasted the original part and should be even better…
I wanted to install gauge pods but wasn’t willing to drill into what is now a 40+ year-old, relatively rare part. So, I set out to recreate it. The first challenge was the A-pillar’s unique curvature along the body, which doesn’t lend…
This is a replacement for a 1979 Camaro Berlinetta glove box. the original is made out of cardboard and after several decades needed to be replaced. I had to split this into 2 parts for it to fit in my printer. This should print on a…
Shift bezel for a 1979-1980 manual RX-7. You will need a new shifter boot that is of sufficient size for this. I made my own and can upload the templates a bit later once I finish tweaking them. To assemble you will need 12 M3 heat press…
Plate runner replacement for ariston microwave, suggested material ABS. You can isolate it from high temperature of food using a silicone or crock layer. Category: Kitchen & Dining
[Zink und Posaune : Studien zu Überlieferung, Instrumentenbau und Repertoire page 204 Fig. 11: Zeichnung des Original-Mundstücks von Paris, Musée instrumental du Conservatoire, 979.2.18 im Maßstab 1:1. Vermutlicher Originalzustand ohne…
I'm really lazy with this one
TINY AF F-150. Inspired by this:
This is a replica of the Ral Partha miniature 01-051 named "Gryphon", "Griffon" or sometimes "Young Gryphon" from 1979. It is from the "Personalities and Things that go Bump in the Night" series. See…
Hole cover tachometer engine XR XLS 125 1979-1987 Honda
I added a bowden tube hole to be used with Marks K1C riser when also using his CFS top mount. Should be printed with the honeycomb surface up using tree support.
We removed the A/C from my wife's 1979 Camaro and wanted to replace the stock A/C vents with cubbies for storage. You will need the stock screws for the lower Vent Cubbies and 8 M3 screws and nuts for the front or upper cubbies. The two…
Ce joint permet de masquer les fissures de la fibre qui apparaissent au niveau du rétroviseur. Imprimé en PLa mais le Pteg sera plus durable dans le temps.
Náhrada za rozlámané tlačítka.
Twin I Beam Bushings. I suggest printing in TPU or other flexible rubbery filaments. The bushings should be printed to be firm while remaining slightly flexible. I would suggest keeping wall thickness down focusing on infill to get the…
The 1979 Milton Bradley Microvision was the first gaming handheld with interchangeable cartridges. The “cartridges” are faceplates that slot into the top of the console and clip into the bottom, with integrated touch pads, screen…
Plug to replace the rear window defroster switch on a 1979 Camaro Berlinetta. Ours was broken so I made this plug to cover where the original switch was. You will need the original clip to secure this to the dash. I've only tested this on…
The first model is based on Suzuki P/N: 57465-18600, 57465-18601. #9 in the parts list. Works in the clutch or brake levers. Print 100% infill, I used ABS, but PETG should be good, too. The second model is based on Suzuki P/N: 57481-33010…
A ridiculously long and funny Ford F-150 that is 471.67 mm long (about 1.547 feet long or about 0.3 m).
Replacement part designed to securely mount the cabin noise cancellation microphone in various General Motors vehicles
I am uploading this for a fellow Mustang owner but it may be useful for others as well... This is a custom shifter bezel that I did for my car. Like my other model (shown below), it is designed to fit into the factory location. However, I…
The handle of my Dad's magnifying glass broke off, so this is a clamp to put it back together. Probably nobody will ever need to repair this. This is for the larger version of the IK magnifying glass, around 110mm iirc. The original metal…
Fits Suzuki P/N: 38850-47000, #27 in the parts list. I printed in ABS, but PETG or anything with decent resistance to the elements should be fine. Don't use fiber reinforced, as it needs some flex. Print with supports for the tabs. It's a…
