Search results: 9x

Boeing 777-9X Model

1:200 Desk Model of the Boeing 777-9X.

LED U-Channel (9x17mm)

I designed this because I couldn't find any 9x17mm aluminium u-channel here in Australia and really, this is one of the great things about 3D printers - if you don't have it, you can make it. The drive to make this was for use with…

Lathe Change Gears - 9x20

If you have a 9x20 lathe then you know what change gears are, and if you bought a used 9x20 lathe some of those gears may have gone missing. These 3D printed gears can be used to replace missing gears. Even if you have the original metal…

9x20 Lathe Sacrifical 80 tooth gear

This gear should work on numerous 9x20 lathes available from Grizzly, Central machinery (Harbor Freight), Jet, and many others. This is an 80 tooth "sacrifical" gear - so called because the idea is that in the event of a head crash or…

Bonsai pot 31 rectangular beveled 199x149x56mm

Bonsai pot 31 rectangular beveled 199x149x56mm, Support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is…

Sterilite 149X Series Replacement Handle

Handles mysterious sometimes go missing on these sorts of bins. I made a printable replacement for the 149X series clear Sterilite bins. It requires two 6 mm M3 screws per handle to secure the pegs and enable printing with optimal…

9mm Luger Cartridge 9x19 Patrone Mega Size Model for Education

A multi-part model of a 9mm Luger cartridge with detailed construction. Primer, case, bullet, bullet core and powder charge. Ideal for decoration and education.

Lathe Spindle Spider for 9x20 Lathe

This lathe spindle spider fits small lathes with a rear spindle thread of M27x1.5. This includes many 9x20 inch lathe models. This is a modification of my 7x10 lathe design - resized to fit my 9x20 lathe. Assembly There are 8 holes that…

Fired 9x19 Parabellum Educational Model

Another fired round. This time 9x19 Parabellum. Also called 9x19 Luger. Tolerances are .15mm for the primer and projectile. These tolerances are not what a true bullet would have. The tolerances have been increased for 3d printing. The…

9X20 Lathe Cross-slide Crank Driver - Two Versions

Note : See the attached PDF file with crank handle dimensions to see if this will work with your lathe. This was made for use with my Central Machinery 9x20 lathe, and will likely work with many other similar import lathes. The general…

9x20/7x10 MT2 Lathe Draw Bar Handle for Collet Holder

Feb. 20, 2021 : See the improved version of this print here: https://www.prusaprinters.org/prints/57606-9x207x10-mt2-lathe-draw-bar-handle-for-collet-hold Recently I purchased an ER32 collet holder for my lathes. The collet holder fits…

9x20 Lathe Spindle Nose Thread Protector

This print protects the threads of your lathe spindle when you are using accessories mounted in the MT3 spindle bore. This is for a 9x20 lathe (or any other lathe) with an M39 x 4mm spindle thread. I also included a test print piece which…

9x20/7x10 MT2 Lathe Draw Bar Handle for Collet Holder - Version 2

This improved version of my previous print is a bit easier to use. The previous version worked, but the handle tended to get a bit jammed into the spindle hole. This new version still fits into the spindle hole, but it has a shoulder…

Myuto Flick 19X - Working Toy Gun - Rubber bands slingshot gun

Battery Storage Tray - for AA (36x) + AAA (49x) Batteries - Drawer Organizer

Practical battery storage trays to keep your drawers clean and organized. No more loose batteries rolling around! 🟧 AA Version: Holds up to 36 batteries (approx. 104 x 94 x 23 mm) 🟧 AAA Version: Holds up to 49 batteries (approx. 93 x 80 x…

9mm Luger, 9x19mm

9mm Luger, 9x19 Nato

9x LEGO Minifigure Display Stand

Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) Showcase your LEGO minifigures with this…

MAK Ammo Box 9x19mm Para - 100pcs

Medium capacity ammunition box for 100 pcs of 9x19mm Parabellum bullets – made with IPSC, IDPA or similar shooting sport in mind, where lots of bullets are spent during every training. High capacity box (150pcs) available here –…

MAK Ammo Box 9x19mm Para - 150pcs

High capacity ammunition box for 150 pcs of 9x19mm Parabellum bullets – made with IPSC, IDPA or similar shooting sport in mind, where lots of bullets are spent during every training. Medium capacity box (100pcs) available here –…

Flick 19X With MODS! - A shooting toy pistol. Fully open-source (CAD file Included)

LEGO Peugeot 9X8 24H Le Mans Hybrid Hypercar 42156 Vertical Mount

Print using at least 4 perimeters and with 20%-30% infill. I suggest some material that resists cold flow better than PLA such as PETG or ASA. Leave the part the way it is oriented to the bed so the layer lines are arranged properly for…

Large Scale (1:50) Boeing 777-9X

Model of the Boeing 777-9X. Contains files for creating a HO (1:87.1) model (can go bigger). Or a more reasonable 1:400 sized one with all the parts in one .3MF. Print instructions Make sure to mirror the parts for the large print Large…

Gun loader: CZ P10, CZ P07, CZ P09 — 9x19 mm Luger

Recommended to print with PETG.

LSI 9300-16i Noctua NF-A9x14 Fan Shroud

This is an older design. Please consider also checking out this one created by @ briancmoses : https://www.printables.com/model/1046107-lsi-9300-16i-hba-cooling-fan-shroud This HBA runs pretty hot and I wanted to mount a fan to it instead…

ECM (v1) 30cm Rifling Mandrel-9x19

note that there is a V3 version out there... https://odysee.com/@c0ld\_d8rk\_h8nd:8 this design is taken from a: Rifling Mandrel-9x19-6gr-polygonal-1in9.82-Twist-8.82mm-Bore step file. this for the use for a 300mm barrel and this can be…

Cat Food Storage for wet food pouches, 9x14cm e.g. Whiskas

Cat Food Dispenser for Wet Food Pouches Overview Designed for wet food pouches (~9x14cm) Two sizes: Tight fit and loose fit Features Can be printed without support Compatible with popular wet food brands (e.g. Whiskas) Printing Suitable…

lego technic beam 9x1

lego technic beam 9x1

Custom Glock 17 9x19mm | +3 extension (no mag alteration needed)

No support needed. Print in ABS, I didn't test it yet with PETG, but it's on the way. If you use a magwell, make sure to take button head screws, my socket heads ones make it more difficult to insert and extract (but they may lower the…

Snapmaker U1 Mainboard & PSU Cooling Brackets for Noctua NF‑A9x14 Fans + Chamber Insert/Divider

This project includes cooling brackets for mounting 92 mm Noctua NF‑A9x14 fans to the Snapmaker U1 mainboard and PSU, along with a chamber insert/divider that improves airflow and adds thermal separation inside the electronics bay. Print…

Complete 9x9 Go Set with Board, Bowls, and Stones

Ever heard of Go? It's simple to learn, fun to play, and has pretty much no skill ceiling. Print yourself a set and have some fun! No supports are required for any parts, and the board will fit on an Ender 3 Pro's print bed (but just…

🂋 Travel Dominos 9x9 Set 1 Color Change

I'm printing this soon and will add more pictures. ------ The 9x9 remix of my travel set!! Goes on a string or shoelace to put in any pocket or bag! 1 color change included.

Reloading Funnel 9x19 & .223

Small but handy powder funnel for Luger 9mm and .223 Remmington / 5,56 NATO. Fits resized cases perfectly. Designed to be usable in reloader big hands... ;) Print instructions Category: Tools Print Settings Printer Brand: Prusa Printer:…

Cookie Cutter - Ausstecher - 9x STAR WARS

Collection of cookie cutter with Star Wars theme. Size can be modified +- 20% in the slicer. N joy

9x19mm Parabellum

The 9x19mm Parabellum is a cartridge that was designed by Georg Luger for DWM's Luger semi-automatic pistol. Category: Sport & Outdoors

Speaker Adapter for BMW E9X - 4 inch speaker - 3 screws

Adapter for use on BMW E9X vehicles when trying to mount standard 4inch speaker with 4 screw holes on BMW which uses 3 screws for mounting. Print Settings & Assembly Printed using PLA+ 0.2mm layer height 20-30% infill No Supports needed

Lego Technic Ford GT & Peugeot 9x8 wall mount.

Modeled this in Fusion360 to allow me to get these giant models off my desk. Mounts to wall using simple drywall anchors that you can get at Ace Hardware / Home Depot.

Tiered 9x LEGO Minifigure Display Stand

Follow me on Instagram or Twitter for weekly updates on free, high-quality designs like this. Get exclusive free designs, commercial licenses, and premium model plans on Thangs ! (affiliate link) Showcase your LEGO minifigures with this…

Enraged Rabbit Carrot Patch (ERCP) MultiMOD 6&9x Buffer

BOM Besides the printed parts you need of course the: 6x 608 bearings 1x 5mm steel rod with a length of 135mm (+ M5 tap) or directly as threaded rod. 2x M5 nuts 6x Pneumatic connector with M6, M8 thread or Ecas (choose correct PatchWall…

Follower glock G17, G17L, G19, G19X, G26, G34, G45

Follower glock G17, G17L, G19, G19X, G26, G34, G45

RUGGED AMMO BOX - 9x19

A 100-round waterproof rugged ammo box to store/transport your 9x19 ammunition.

Yankee Box 9x200 - 200 count, 9mm luger storage container

This is a two tier latched container box for storing 200 count 9mm lugers. Compact storage for use when going to the range, for example. The box is not designed with a locking point as it's a moot point if one can just smash it open…

Plastic Nut Insert for #10 screw 9x9mm square

I made these for my 1995 4Runner for the front bumper license plate. They fit a 9mm x 9mm square hole and use a #10 screw. Tested fit - perfect. These are best printed in nylon. Try them and post your results in the comments. Print…

9x8 Lego stand

Stand for Lego 42156 Technic Peugeot 9X8 24H Le Mans Hybrid Hypercar (35°) There is a second version where you can print “9x8” and “Peugeot” logo separately in order to change color at 2mm

9x19 Springfield Armory ammo box

I got a request for a 9mm Luger ammo box. The spacing is 50pcs/10,34x30,74mm between the insert top and bottom. Please read the size for the ammunition before you comment that your ammo doesn't fit. I am using 1,6mm stainless steel…

9x9mm square nut (Tool board/wall/pegboard)

The center hole is 3.5mm to allow for it for M4 hardware, but the f3d file (and step file) is available for you to customize to your needs. Would definatily recommend PETG for this, as it need to be a little flexible to not crack when…

Semi Closed Cable Drag Chain, 49x21mm internal, 59x27.5 external.

Semi Closed Cable Drag Chain, 49x21mm internal, 59x27.5 external. The links have an integral support that will need to be snapped off and thrown away after printing. The standard link cap somewhat restricts the internal space when in the…

9X19mm Stacking Loading Block

This is 9X19mm stacking loading block. This is a work in progress, so check for updates before printing. Revision History: 05/12/2023 - Text vertical adjusted. Category: Tool Holders & Boxes

9x19 LUGER

Náboj 9x19 LUGER Sellier&Bellot

9x19 Luger ammo box

What to do with 50 pcs box of ammo? Ten rounds to target, twenty cartridges to pistol, another twenty cartridges to 3D printed box.

Slide-in legs for IKEA BURHULT 59x20 Shelf

Project Overview Have you ever thought about adding a personal touch to your IKEA furniture? This project to create legs for the IKEA BURHULT shelf will allow you to do just that! Not only will they enhance the shelf's aesthetics, but…

9x19 Ammo box 9mm

Capacity of the box is optimized to its dimensions which had to be exactly box for 720 pieces of 9x19 ammunition tray contains 3 x 240 Tray rows columns We need a 2 mm line which we glue on with super glue Screw 6x M3 40mm This is the…

Gridfinity - A23S battery holder - 1x1 - 9x

This Gridfinity container holds 9x A23S batteries. It does not have screw holes but I kept the regular magnet holes.

9x18 Makarov ammo box

I got a request for a 9x18mm Makarov ammo box. The spacing is 35pcs/10,25x26,07mm between the insert top and bottom. I am using 1,6mm stainless steel Tig-welding pin for the hinge and latch. I made the latch smaller than necessary but let…

9mm Luger 9x19mm Training Bullet w/ TPU Firing Pin Cushion

(Imported from my models on Thingiverse: https://www.thingiverse.com/muchtall/designs ) 9mm Luger 9x19mm Parabellum Snap Cap Dummy Training Bullet Cartridge Round w/ TPU Firing Pin Cushion Print the cartridge/bullet in PETG or ABS, and…

9mm (9x19mm) Ammo Can Label Stencils

9x19mm (9mm NATO) Ammo Can Label Stencils! There are a lot of variants here.. they are as follows: - 115gr FMJ - 124gr FMJ - 147gr FMJ - 125gr FMJ \\ - 125gr JHP - 124gr JHP Enjoy!

Ultimate 9x9 Bed Leveling Squares! - Optimized for Professional firmware with UBL

Want to torture yourself further? Want a beyond great first layer in every part of the bed you can get? Or maybe your build plate surface is more like a gravel road? Well then this is the print for you :) This print matches a 9x9 mesh…

FPV Drone Landing Feet [19x19mm] (eg: for the Rekon 10 Pro)

These TPU landing feet are custom-designed to mount under each motor on the Rekon 10 Pro frame, providing durable skids for smoother landings and protecting the frame during takeoff and landing. Each foot/skid has 4 mounting holes to…

Tie Fighter Google Mini Mount - Resized 169x199x222

Had this for a bit and decided to post it even though I have not printed it yet, which I really hate to do as I think everyone should print their own project first just to make sure nobody else wastes material and time but I just don't…

Sterilite 149x replacement latch

I broke a latch on one Sterilite 1495 (25qt) clear container and saw a chance to try out 3D scanning. This is the very rough result. Functional and printable, but not a very clean model. Latch should fit any containers in the 149x series.…

Gridfinity Tool Base (Grid 9x13)

In order to put my tools into good order I needed the 9x13 grid which I created from a SCAD file. Don't remember who it was, but thanks! In TinkerCad I added some borders to fit the grid into my tool box drawer. I had to fill 410x560mm,…

Gravity Knife (with 72x9x0.4 blade 30°)

Based on [ TIKTOK GRAVITY KNIFE FIDGET TOY ] but I don't need a toy. So redesign to pair my artists blades. Requires the following hardware: x2 M2 nut x1 M2x11mm flat head screw x1 M3x5mm flat head screw x1 72x9x0.4x30° artists blade…

Phone Holder clamp for a C49RG9x monitor

Print two of these clamps and snap them to the top of your C49RG9x. This clamp is designed for a iPhone 12 but will work for any phone which is about 1 centimeter thick.

9x19 HK ammo box

I got a request for a 9mm Luger ammo box. The spacing is 35pcs/10,34x30,74mm between the insert top and bottom. Please read the size for the ammunition before you comment that your ammo doesn't fit. I am using 1,6mm stainless steel…

4x5 9x12 sheet film developing holder

I stole the design from the eTone 4x5 holder photos and made this thing from 1.6 nylon trimmer line. Added flexible joints instead of screw. I prefer this simple 2 sheets holder because of x-ray film stiffness and emulsion fragility. Fits…

Grid 9x9 Multiboard

Grid 9x9 MultiBoardOctagonPlate/Underware

Thrustmaster P310, R383, T300, 599XX Magnetic Paddle Shifter Mod

Purpose Simple addon to the back of Thrustmaster P310 (and other similar rims*) that converts them to magnetic paddles. Makes the feel of the paddles feel much more premium, and provides a nice solid point where the paddles aggressively…

9x19mm Parabellum dummy

9x19mm Parabellum dummy

3d printed 9x17 u-channel for LED Light Bar

I got the idea from other projects, but I found them a little light, so I designed one that is a little more robust. If you use my 3mf file, you will also have a nice pattern on top of the channel what is in line with the LED light bar

9x19mm Snap Caps

The TPU parts are just press fitted. They cycle fine on a Walther PDP.

9x19mm 9mm Parabellum Para Luger snap cap with TPU buffer insert

Didn't have any 9x19mm snap caps, so I printed my own. Took the measurements straight from CIP. The body has a Ø4mm hole with a rounded end, so you won't need any supports. The insert should be printed in TPU. In theory it has a radial…

9x OO Guage Wooden Barrels

Nine OO Guage barrels, Perfect for OO guage model railways and other models

D&D tiles 9x9

dungentiles for DND

9x12cm Standard sheet film holder V2

Overview This is the 9x12cm version of 4x5" Standard film holder. It uses 0.5mm dark slide made from black plastic A4 folder. This will be my main film holders because of metric x-ray film dimensions. No supports Velvet sealed dark slide…

NV-AA1-09 Airflow Amplifier specified for NF-A9X14 92mm Fan

NV-AA1-09 Airflow Amplifier specified for NF-A9X14 92mm Fan, with a custom support and two fixing points with M3 screws

9X19mm Vase Mode Stacking Loading Block

This is Spiral Vase Mode 9X19mm stacking loading block. This is a work in progress, so check for updates before printing. Revision History: 05/14/2023 - Fixed *-50 slot cut into lip. 05/12/2023 - Text vertical adjusted. Print Settings…

K36 Box AmmoBox for 9x5 Rounds .22 LR

In a.m. discipline you need 5 rounds per stage, standing, lying, kneeing. Therefore, this box provides 5 round per stage. Multiple parts: Box itself Slider (cover) Nameplate(s) Arrow Nameplates you need to design individually.

9x17 gun shell pot

9x17 gun shell pot scaled up 666%

Simple 50 round ammo box with sliding lid and snap lock for caliber 9x19 mm (S&B trays)

Simple 50 round ammo box with sliding lid and snap lock for caliber 9x19 mm / 9 mm Luger / 9 mm Parabellum. Takes standard Sellier & Bellot plastic trays out of the box. Prints without supports.

Improved magazine clip (rubber band powered) for "Flick 19X With MODS! - A shooting toy pistol. Fully open-source (CAD file Included)"

Thanks Many thanks to @myuto_675467 for not only making this design, but allowing this Labs category version of it that allows remixing. Original open-source CAD files are over there: Why this listing? The problem with the printed springs…

CLCKbase with Screw Holes, Sizes up to 9x9, Gridfinity Baseplate

See Original Model for details and 1x1 to 1x6 versions (1x do not have screw holes). The Flat-on-Top connector makes it a bit easier to use for me. You will appreciate the larger versions if you have a big printer.

9x19mm Parabellum Cartridge

Vytis 9x19

9x19 mm ammo box featuring Coat of arms of Lithuania. Holds 100 rounds off 9mm. additionally you will need two 1,5 mm nails. A support is added in the closing flange in the lid, so you can print it horizontally. Doing this will make the…

Dummy Cal. 9mm Luger / 9x19mm Bullet

Simple print for sports shooters and hunters.

BMW E9x M3 Manual Shifter Boot Clips

This replacement clip is designed for the BMW E9x M3 (E90, E92, E93) center console shifter boot. If your shifter boot keeps detaching or won’t stay secured, this clip is the perfect solution. Installation: This clip must be glued in…

BMW E9x car jack points insert

Insert for your car jack to fit the E9x car jacking points. Made to fit a car jack from manufacturer Winntec, but will probably fit others. I own a E91 and modelled it for this one, but i suspect all E9x models share the same jacking…

Custom 9x HDD Array Sled System for SSUPD Meshlicious

Refer to reddit and PM me there if you need help with this: Serverlicious: An SFF NAS with 9x HDDs for UNRAID and Plex : sffpc (reddit.com)

Shaft 2.9x8.5

It was really hard to source the Shaft 2.9x8.5 for the cassettes so I made some in Prusa Slicer.

Canon EF / EF-S to M39x1

DISCLAIMER Due to the different distance between the lens and a DSLR sensor/film, the lens can not focus properly, it only focuses on very short distance.

Scope Throw Lever for UTG Bugbuster 3-9x32

Based on the great work by mvasilakis (https://www.printables.com/de/@MVasilakis_835 and https://www.thingiverse.com/thing:3550867 ) I remixed the scope lever to fit on my utg bugbuster 3-9x32. It's thinner, the opening is different and I…

SLV6 Magazine Speedloader - optimized slide (for Glock 19X)

An optimized slide for Glock 19X (remix)

UNW 10x 9x19mm stripper clip

I used ESUN PLA PLUS for this model and it gives enough flex to the detents this way. but other materials might work fine as well. Category: Sport & Outdoors

Box for 100pc 9x19mm rounds

Box for 100pc 9x19mm rounds. To assemble this box fasteners are needed: -3x M3x20mm Socket Head Screw -1x M3x30mm Socket Head Screw -4x M3 Nylock Nut Material: PET-G, PLA etc. Layer high: 0,2mm or lower Supports are needed.

Dummy Round 9x19

little object for evening houres plastic dummy round 9x19 perfect for dryfire, safe handling trining or just for decoration. bloody beginners make, but there is a learning curve… i have printed it with 100% infill with PLA. Testresults…

AtomRC Dolphin Motor Mount 19x19mm

The AtomRC Dolphin motor mount is pretty weak, and barely glued in. This mount replaces the stock wooden one, with an insertable mount. There is an included 19x19mm plate which attaches via m3 bolts and screws into nuts on the mount. Best…

TikTok Magnetic Fidget Sword (8 x 3 / 9x3 magnets)

I included three versions: 1(A) - Encased - The magnets are encased. I did not like the idea of gluing the two halves together, so the model is one piece, and the magnets can be placed by adding a pause at 8.6mm. 1(B) - I also included an…

ToDo List (Checklist) Stencil for 9x9cm notes

ToDo list (checklist) stencil for 9x9cm paper note block. You can choose square or circle checkboxes. There are two versions with 8 and 10 items.

Throw Lever Leupold VX-I Rifle Scope 3-9x 40mm

I used a 7/64 drill bit on the thin side enabling a small wood screw to pass through. Use a 5/64th bit to pre-drill the lever side. Drilling is required to prevent splitting. Super Glue can reinforce the thinner side if needed. 30% infil…

PS1 USB-C Mod SCPH1xxx-9xxx

Summary Since every other USB-C mod didnt fit my needs, I decided to create one on my own. This prototype is currently in green - will try to print it in resin in black or grey. PARTS USED: RePSX variant (white pcb in my case): PDC004-PD…

Photo Frame Polaroid - Picture Frame - 9x9cm (10,2x12cm) - Hexagonal Shape - Portafoto per Polaroid

Photo Frame - Picture Frame Polaroid 9x9cm (10,2x12cm) - Hexagonal Shape - Portafoto per Polaroid Update 07/05/2025: added Hex Polaroid 9x9 Frame_1 REV_C.stl, geometry cleanup Resize to adjust dimension If you download/enjoyed this file,…

9x tall hex bit peg board holder

9x hex bit peg board holder It's made for the taller hex bits that need deeper slots and wider space. Print standing with 10%-20% grid/gyroid infill and organic support from build plate only. The hex bit holder couples with the attachment…