244 models
It took me some trial & error to come up with this. It is most certainly not final because I need to tune it with the weight of the car. When loaded it should be partially compressed leaving some room for more compression and also some…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
28/02/24: Found a bug ! You need to use the new files… I also improved the overall rigidity by adding a PLA slide. TPU spring printing: I'm providing a “color change” in the print file; start with PLA (less than 1 mn) then put TPU. This…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
The former spring was quite fragile because of the print orientation; it would separate in 2 or 3 parts after a while. This design is basically two small springs similar to my PLA/PETG springs like in this design connected together so…
Print approx. €1.13–€1.38 excl. taxPreliminary estimate for one variant
In the paper Acoustic metasurface-based perfect absorber with deep subwavelength thickness by Yong Li and Badreddine M. Assouar, is presented a “a metasurface-based perfect absorber capable of achieving the total absorption of acoustic…
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
3D model dimensions: washer 20mm, washer height 1mm, seat 16.5mm, plug height 6mm, recommended plastic PETG
Print approx. €0.11–€0.13 excl. taxPreliminary estimate for PETGSource material: PET
I designed some shock absorber spacers for tamiya dt-03 chassis Neo Fighter They are used to use the maximum spring compression with the original shock absorbers. I noticed that the springs had little compression even with the stock…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for PETGSource material: PET
worm shock absorber for your tennis racquet printed out of TPU and PLA
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
GENERAL: 3D file to protect your Eggs in the American Rocketry 2025 Challenge see The American Rocketry Challenge - World's Largest Student Rocket Contest . This year’s ARC challenge has 2 grade A large eggs horizontally mounted in the…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
Toilet lid shock absorber replacement This design was computed for repair the shock absorber that i… stupidly… flush when I was woodcrafting the back furniture. It's a very fast print, which can perfectly fit the toilet lid hole spaced by…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have for you RC T98 Land Rover Defender shock absorber support. Raises the car by at least 10mm!!!...the lift is really noticeable and the car is also more stable. It…
Print approx. €0.37–€0.46 excl. taxPreliminary estimate for one variant
Dieses Modell ist mehrteilig, damit weniger Stützmaterial benötigt wird. Neu (April 26): Längere Version für 56er Rahmengröße This model is multi-part, so less support material is needed. New (April 26): Longer version for 56cm frame size
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
This is a simple mount for your RC car's shock absorbers so that you can easily change the oil. ----- Dies ist eine einfache Halterung für die Stossdämpfer deines RC Autos, damit du den Ölwechsel ganz einfach erledigen kannst.
Print approx. €2.89–€3.54 excl. taxPreliminary estimate for one variant
Shock absorber it's very easy to 3d print and assemble. For assembling u need screws, paper and water. Assembilng: dissolve paper in water, putt to the tank, add small amount of water, add "presser stick" in tank too then close with top…
Print approx. €2.57–€3.14 excl. taxPreliminary estimate for one variant
Remix to be able to adjust the height as well as add some shock absorption and grip. Note: Pay attention to how you orientate the TPU feet if you decide to use them, they should be flush on all sides and only go on one way. REMIX Credits:…
Print approx. €19.35–€23.65 excl. taxPreliminary estimate for PETGSource material: PET
3 Pieces... Actuator prints in place but flip it upside down! Spring should print fine but some people have messaged me saying they needed a raft Threaded cap.
The original solid rubber recoil pad on the Remington 870 does somewhat reduce recoil simply because of its weight. It is, however, hard as a rock, and only gets harder as the rubber ages. This shock absorbing recoil pad for Remington 870…
Neue Version verfügbar! / New version available! - Verbessertes design, schneller gedruckt, weniger Filament und Schrauben nötig. Improved design, less printing time, less filament required and fewer screws needed.…
This shock absorber is compatible to the common Lego axles. The sliding piece is put on the axle together with the pressure springs and blocked at the top. There are two versions, each with a hole at the top and an axle cross at the…
Summary Socket head screw M4x40 or M4x45 -> shorten the hexagon socket screw Front spring -> 0.8x12x40 mm -> is also working for the rear -> more spacers needed Rear spring -> 1.0x12x40 mm I used three spacers for the rear and one for the…
Hi, It is my idea for shock-absorbing landing gear for quadcopter with F450 frame. 2 legs on opposite sides should be connected some kind of elastic cord, spring or maybe strong rubber band. It should absorb some of impact of hard…
I didn't have any car parts such as shocks, differential and ESC and I didn't spend so much on that. Then I designed rubber band shocks and surprisedly worked well. It provides adjustability for front and back separately with using…
Spring is splitted in two parts (easier to print)
This model is compatible with the lego system.
I was amazed that manufacturers try to save money even on these small stuff. I noticed the other day that 3 of the 4 shock absorbers on the bottom side of the toilet lid were broken, after only 2 years of usage. They are originally a…
This model is compatible with the lego system.
I changed the dimensions of the clipping part to be more easily inserted / removed on the Ender 3 S1 Pro, since you need to remove the feet in order to remove the back panel. The original model was bending too much and could not be…
6x M3x25mm screws are required for assembly. Print inlays and ring seal in TPU . The seal is best printed in 100% infill - concentric. For the inlays, use 2-4 walls and no more than 0.8 mm top surface thickness. Use 5-8% infill for harder…
Want to have spare parts without waiting for shipping ? This is the front shock absorber mounting plate for the wltoys 124008. I print it with carbon fiber nylon. Probably stronger than the original part if used with longer bolts. It…
FAQ I have built a X500 size quad-copter and I needed to reduce the vibrations to the MATEKSYS H743-SLIM Flight Controller as much as possible. This module will only fit the MATEKSYS H743-SLIM v2 and v3 flight controllers. To complete…
This is a 88.5 mm full 3d printed shock absorber Print it with support. Category: Robotics
This model is best made of TPU. I made this model for my Duster mk1 fl 2015 and it fits perfectly, now water does not collect in this place.
This model is compatible with the lego system.
I recommend printing the spring out of ABS. The rest can be whatever.
Reproduction of the original part to lock the air pistol during transport
Print with support & TPU filament
These are effective vibration damper and noise reducer feet for any 3D printer using 3030 extruded aluminum beams as the frame, like the Prusa i3 MK3S. This was inspired by Plaidbear's design . My reasons for making my own design: I…
This is a cap to protect and beautify the shock absorber bolts of my Mercedes W203. I printed on PETG to withstand the heat coming from the engine. Print with 25% infill. No supports needed.
shock absorber performance design
This is a, Capacitor + spike absorber + Vifly finder 2, support for a JeNo 5.1 Frame , remixed from my model for a Vifly finder mini. The JeNo 5.1 frame is an open source frame project design by Nochamo and JeromeFPV from the french…
Quick little shock absorber stand I knocked up. Sized for 1/10 touring car shocks, fits Tamiya TRF, CVA, Yeah Racing and XRay shocks. I've made the holes quite deep so buggy shocks might fit, I have yet to check. The centre hole and the…
Smoke Fume Absorber This project was realized while streaming live at https://www.twitch.tv/chrisfigge. Years ago i started soldering. And every year I'm promising myself to buy a fume absorber, but since today I've never did. So I've…
**3D Printing File for Spice Lid with Moisture-Absorbing Rice Cage** This 3D printing file features a spice lid with a built-in rice cage to absorb moisture and keep your spices fresh. It fits most plastic spice jars, and for a fitting…
universal mount for fettec absorber and the 50V capacitor for use with cable ties https://fettec.net/shop/fettec-spike-absorber https://fettec.net/shop/kondensator printed in tpu 0.2 layer without supports I would be happy if you leave a…
I designed this case for the Samsung Galaxy S25 Ultra to be drop resistant with minimal bulk. Features: Energy absorbing corners Raised edges and corners so the phone can be laid on the screen Sunken camera lenses Lays flat on both sides…
If you had to take apart the front/rear shock absorbers, you know that the holes to release the shock absorber are just covered with a sticker and re-sticking is not possible without glue, so I made a simple hole cover. Printed with PETG…
Update May 3rd, 2023: added a “Special” version with a 0.4 gap between the two “in-rail” parts, as well as shorter partial in-rail section… you'll see when you download and import into your slicer. The idea here is to have a better gap…
Vibration absorbing feet for the Voron 2.4. Those that came with my kit were already flattened. So I printed my own using TPU90 from Polymaker. They work like a charm. I used PIF settings for the print.
Designed these to add some shock absorption to my longboard with TPU risers and reduce the teeth-rattling feeling I had going over cobblestones. These fit standard drop-through trucks and match the hole pattern for mounting. They're 2mm…
3D Printer Low profile shock absorbing feet. for 40mm aluminium extrusion (like ender 3) I used x5 (2,Stiff) for the ender 3 remix of https://www.thingiverse.com/thing:3116841 Infill: 100 Filament: ABS PLA deforme overtime, be carefull.
Dukedoks cramer truggy shock absorber https://cults3d.com/es/modelo-3d/juegos/cramer-truggy-rc-4x4-full-3d-printed
After seeing Taekys x axis bumper i also wanted to add one to the y axis so i designed my own. The credits for the x axis bumper belong to https://cults3d.com/de/modell-3d/werkzeuge/sovol-sv06-x-axis-tpu-damper. Print one in TPU. It slots…
This vibration damper can help to reduce unwanted vibrations on loudspeakers and other devices. Put one of them on each corner of your device. Print with max. 0.20mm layer height and use a softer material like TPU (hardness should be…
This is a 3D printed shock absorber I made for a future 1:5 scale RC car. the travel is about 40mm. It uses mineral oil (baby oil) as a working fluid and uses a M6x80 bolt with the head cut of and threads cut on the secound end as the…
This is a, Capacitor + spike absorber + Vifly Finder Mini , support for a JeNo 5.1 Frame . The JeNo 5.1 frame is an open source frame project design by Nochamo and JeromeFPV from the french community WeAreFPV . Details : I have a 10mm…
This remix makes the feet a little stiffer, and about 50% wider. Finally I made the horizontal sections solid for added strength. I absolutely do like the original, but when 8 of them break, snap, collapse in 2 weeks time, I need to get…
After moving my KOTTO Fume Extractor onto a small shelf, the pipe could no longer reach the solder fumes. So I created this simple right angle pipe to regain a bit of slack lost in the upward arch.
Tento stojan slúži na uloženie tlmičov pri výmene oleja. Priemer dier: 1,3mm ; 2mm; 1,8mm ; 1,5mm This stand is used to store shock absorbers when changing the oil. Diamater holes: 1,3mm ; 2mm; 1,8mm ; 1,5mm
These printable HiFi absorber feet are designed with the spike principle in mind. They have been tested and are currently in use with HECO Superior 840 speakers, which weigh 19 kg each. This specific design can only be achieved through 3D…
Due to its modern look, it will not disfigure our rooms, and additionally, it can have an aesthetic function. The device has a large contact surface of the absorber granules with air - thus the efficiency automatically increases.
APEX HD holder for Spike absorber vifly finder 2 and capacitor Ø10mm
A simple, friction type shock absorber for 1:10 scale RC buggies such as The Marmot and others. Use a M5 allen head bolt for stem. Also requires a metal spring to be used.
I printed it with a 0.25mm nozzle out of PLA. Designed in FreeCAD.
Remember that you make all the changes to the moderator's work and are responsible for all the dangers. Insert for the Korsar pistol moderator. Under 22 caliber. Printed with Petg filament. Even without filling in the original moderator,…
Aluminium Water Bottle Cover Shock Absorber - Copri bottiglia alluminio antiurto Dimensional measures: Small (Bottle Cover 1 / 2) inner Ø 66mm Outer Ø69x130mm Big_(Bottle Cover 3) Inner Ø 81.5mm Outer Ø84.7x183mm Resize to adjust…
TPU Printable Shock Absorbers for Padel Rackets Upgrade your comfort and performance on the court with these custom TPU shock absorbers designed for padel rackets. Engineered to minimize the transfer of vibrations from the racket to your…
DE Beschreibung: Ein praktischer Helfer zum bauen, reparieren, befüllen und reinigen von RC Stoßdämpfern. Diese verbesserte Version meines Modularen RC Stoßdämpferständers kann schneller gedruckt werden und benötigt weniger Filament und…
I've designed this Ikea Lack table feet stabilizer/vibration absorber to build a 3D printer enclosure in the future. I have not tested them yet as can't currently print TPU, but will update this when I can. The measurements were taken…
This is a suspension Shock from a go kart/ atv. I have worked on these machines forever, so its only natural I make a CAD for decoration of my garage.
New spring stop for shock absorber for 1:16 RC buggy from XINLEHONG. The original one was lost. Parameters of the shock absorber: length: 77mm, width: 14mm, hole: 45mm. Using various colors can result in attractive modifications.
The absorber prevents foam from escaping the skimmer. Other skimmers have this built in, unfortunately the Deltec does not. You can clearly see how well it works in the picture. For me, the part holds without gluing it (clearance ~0.4mm).…
Replacement Shock absorber cap for Alfa Romeo 156. It might fit 147 and GT also. Category: Automotive
A Remix of "Low profile shock absorbing feet for 2020 V-slot (single) profile" with a Twist Clip
PETG is best, for flexibility in the bumpers, PLA works too but wont be as protective/durable Use supports There is a model without bumpers, s20case no bumpers s20case is the standard model for the bumper case s20case ace has an ace…
Borracha tampa de sanita Toilet lid shock absorber
Many of the 32181 shock absorbers have a cap that fails over time, rendering the part useless. This part allows it to be repaired and used again. Print with supports (suggested model orientation in photos).
I was looking for a commercial fume extractor but saw the price tag. So I searched for a DIY thing here at Thingiverse and found the fume extractors linked as remix sources. Though being nice, I thought of something more "complete,"…
Printed with PETG 100% Infill
Expanding on the Rancho Shock Absorber bushing files I made earlier. This set includes the L1 and L3 hourglass bushing shapes as well as the LS straight bushing. Files are OpenSCAD and they allow for user specified height/width, inner…
The circular plate that the spring braces on at the bottom of the shock. What do you call this thing? Printed with PLA+ and will likely hold up fine but you're prolly better off with PETG
Will work even if your printer is not tuned well. Use lighter to remove strings.
Die Schockabsorber Füße wurden entwickelt, um die Leistung und Qualität Ihrer 3D-Druckumgebung zu verbessern, indem sie Vibrationen, Geräusche und unerwünschte Bewegungen minimieren. Diese hochwertigen Füße sind speziell für die…
Use TPU to print this Shock-absorbing foot for all your DIY needs... I recomend using any Openbuilds M5 Low-profile screw. You can optionaly also use a washer on the outside if mouning on a sloted profile. I printed with Ninjaflex 85A
On my OPEL Meriva A the rear dampfer cap sliped down because of the rusty cap mount. The damper works well and i don't want to replace the whole damper only because of the damaged cap. It craps the cap on the top and snaps onto the damper…
This model consists of (2) 3d parts. They fit snugly one inside the other around a rubber vibration damper. The damper compresses vertically with about 40 psi of applied force per damper. The printed parts provide a rigid wall to prevent…
With limited spare on my work bench, I started stacking small parts on top of the KOTTO fume absorber. But I kept bumping the tube coming out of it and every would fall off. So I created this part to attach to the top of the this KOTTO…
A container for introducing sodium chloride pellets. Personally, I prefer them over silica ones, but most designs are unsuitable as they are too small and leak liquid.
For a music room we wanted to install acoustic foam in an appealing form. We liked a few hexagons made of foam covered with felt, but we thought that the exact assembly could be a challenge. That's why we designed this template, which has…
Pajero 3-4 shock absorber strut spacer 10 mm thick.
After the injection moulded ABS clip broke at the screw junction on my shock absorber, I decided that it would be an easy piece to replicate. As a drop-in replacement, the piece reuses the same screws and friction pads. .3MF for printing,…
Italiano Questo design è gratuito a beneficio della comunità, ma se ti piacciono i miei design e vuoi contribuire, puoi fare una donazione a PayPal, che sarà molto apprezzata. Questo è un dumper Nema 17, serve per ridurre le vibrazioni…
Please leave a Like :-) Just my Design for a Shock Absorber Feet with 2 yellow Dot Squash Ball. 1.2 Wallthickness and 30 % Infill is stiff enough for my Printers. On FLSun I had to free some Space because of a Screw - Sapphire and JG…
The feeds are printed with 98A FLEX filament. The absorber under the Z Axis can be made more resistant by adding perimeter layers. I printed all the models with perimeter of 2 and Z axis with 3. For the MK3S, you don't need to print the…
usefull simple design for avoid the bad view after shock absorber modification.
Use TPU plastic
Models for sealing the Wltoys 12428 shock absorbers to prevent shock oil leakage. Only gasket and bladder are needed for the mod. Piston head is just a bonus part. Gasket and bladder should be printed with flex (TPU, TPE, etc.) filament.…
German Mein Design sorgt dafür, dass die Dämpfer (Shocks) oben an der Befestigung am Shocktower geschützt werden. Es funktioniert beim Team Corally Punisher (MLine) und wahrscheinlich auch bei anderen Modellen von Team Corally. Ich habe…
This case was designed for a stroke patient who had reduced hand grip strength and dexterity. Most phone cases are designed with smooth, rounded edges (making them slippery) and minimized buttons to prevent accidental activation. This…
This is a string tensioner for robotic tendons with adjustable elasticity for series elastic actuators that I made for my projects. On the other end of the string there needs to be a string pulling actuator like a reel or a simple lever.…
*** EN *** I created a set of gauges for simple and precise height adjustment of shock absorbers (nut on the shock body). Print out a simple tray and measuring gauges of different heights. They are graduated from 3mm to 15mm. If a higher…
During a drone crash, it hit the camera/gimbal. The lower part of the lower vibration-damping board broke. I have remodeled this part as best I could. Now my drone is working again. This is my first 3D model that I have made and I hope I…
