Counting matching models…
Update 16.02.2025 : The newer X1C/P1S have minimally smaller filter niches (very tight tolerances) - I have now adjusted the size. Now fits this version the old AND newer X1C/P1S perfectly! 👌😊 It was time to replace my activated carbon…
This is a refillable alternative to the original activated carbon filter by Bambu Lab. Just fill the box with activated carbon (I bought mine here: https://amzn.to/3lYflF9) , and you are ready for another 60 days of printing. As shown in…
Aire is a refillable activated carbon filter mod designed for the Ikea UPPATVIND filter. Simple to print, easy to install, and has helped to improve my Quality Of Life. IMPORTANT Please read the instruction guide below. I do my best to…
General I was unable to find a refillable activated carbon air filter (box) for Bambu Lab X1 / X1C / P1P so I rolled up my sleeves and designed my own version. Features Allows to save a decent amount of money using this instead of the…
I wanted to use the carbon pellets I had for the BentoBox v2 for the internal carbon filter and saw @TechwithKramer's model, but the model took almost 3-4 minutes just to slice in Orcaslicer/Bambu Studio and a staggering 2 hours+ to print…
UPDATES 2022-12-02 Released DRIP_TIP_V2 ; it really makes it easier to push air through, IMO. Print with threads facing up. Removed historical files. No one should be using those anyways. 2022-01-20 Released EXT_CHAMBER RC2 2022-01-19…
Vento is a refillable activated carbon/ HEPA filter mod designed for the Prusa Core One. Simple to print, easy to install. It uses magnets and self-align to the exhaust fan opening with the help of m3 screws attached to the rear panel of…
Left and right are available: Please note : I might not be able to keep the files here up to date at all times. It's better to get them from the Git repo . I've been a maker and board member of the French e-Nable association for a few…
The original QIDI activated carbon box keep a lot of space where the heat from the internal chamber will enter to electronics chamber… with this mod we reduce this negative air flow and increase the amount of activated carbon to filter air.
Activated carbon filter to remove odors from your 3D printer, works with FDM and resin. The printer needs to be enclosed as is small and does not have the capacity to filter an entire room. Requirements 1. You need to print one box (you…
Update: 2023 Feb.28 I uploaded pair of ACF exhaust blocker. Since it's nearly impossible to make a bag of activated charcoal as a really square brick, and it'll leak by the two sides. Adding these blockers should make leaking to minimum.…
Required parts: 2 x filter_body_cap.stl 1 x filter_body.stl 1 x filter_holder.stl Additional items: cylindrical activated carbon, fine mesh. Optional parts: mesh_stencil.stl - for mesh chopping Slicer parameters: Support: No Infill: 15%…
Remove harmful fumes and VOC from the air to keep you, your family and your pets safe. This mod uses proven HEPA and activated carbon filters with powerful 5015 radial fans to achieve a 5.5x improved filtration over the axial version!…
The goal here was to design a way to add an activate carbon filter to K1 exhaust fan. I've researched for an specific filter for this application, and found that Anycubic has one for this specific use. So, it was designed to use this…
**UPDATE: Although very tight at first, the filter seems to loosen and can fall off over time due to the K1 back ribs flexing outward. Recommend using doubleside tape or similar adhesive to keep filer plugged on the K1 (6/12/2024)…
This is the best of both worlds from two very good models. The combination of the two creates an exceptional Activated Carbon Filter for the X1C that can be filled with carbon pellets to filter out Volatile organic compounds (VOCs) from…
I re-upload the model from Thingiverse as I've used it for my server rack based enclosure for the MK4, and it does its job very well. Full credits to the original author. Summary Deutsch siehe unten :) This is a housing for using…
This is a version with a switch limit and a large area horizontal structure, unlike a hole, to reduce wind resistance. Use 1 cm diameter adhesive tape as a pull ring
This is a carbon filter designed to filter the air in enclosed spaces where a resin printer is operating. It is designed for an 80mm computer fan, The internal carbon capacity holds exactly 600gm of activated carbon, the fan sucks the air…
This adapter screws on the back of the Core One with (4) M3x10 screws, makes a good seal, and has a 20mm plenum area between the fans and filter to ensure the exhaust air can spread over the entire filter surface area. The Tesla Model 3/Y…
DIY Activated Carbon Filter: Instructions Print the Adapter Ring Print the Body Print 2 Lids Glue adapter Ring to your 100mm Fan (make sure its on the correct side!) Screw one lid in the part with the long thread of the body Fill it up…
3D printing is known to release harmful compounds (VOC - Volatile Organic Compounds) in the air. Several studies have shown that activated carbon is effective in removing these compounds. There are several models of activated carbon…
Two part container for activated coal granules to replace the obsolete filter. It fits into the upper cavity of the Elegoo Mini Air Purifier. Holes are small enough to allow the use of 3 mm and up granules of activated coal (like Clean…
BOM 2x printed part "Luftfilter.stl" 1x printed part "Luftfilter_Case.stl" 4x Panhead screws 4.5mm or 5mm diameter, length depends on the fan width 1x Fan 120mmx120mmx38mm or 120mmx120mmx25mm, 12V or 24V, high pressure model highly…
Print the Gasket part between the frame and the duct out of TPU 100% Infill everything else can be printed with 20% infill out of ABS/PETG/PLA. Video on the project: https://youtu.be/apJjoncsMGM Designed to use this HEPA filter:…
The 180mm Filter and adapter are designed for my Arctic P12 PWM (Attachment hole distance 105mm) The 206mm Filter and adapter are designed for the beQuiet Silent Wings 4 Pro (Attachment hole distance 125mm) Overall dimensions: Filter for…
Model Summary: Improved Design : I've created an additional version of a charcoal filter. Active Charcoal Pellets : Unlike the original model designed for carbon filter pads, mine is tailored for coal-activated carbon pellets. Screwable…
This model is optimized to use heat set inserts and also removes the unnecessary screw in the middle of the cassettes. This only includes models for the filter cassettes, for the rest of models needed for this project check out the…
The activated carbon filter system enabling switching between external exhaust and internal recirculation. Switch the duct orientation inward or outward to toggle between circulation or exhaust. This is designed to fit perfectly with the…
I needed to increase the efficacy of the filtration against odor so I remixed the Silica Gel container for DRY Box to fit in top of the Xiaomi replacement filter I observed that regardless of how small the opening pattern is some dust of…
Adapter mini filter elegoo for aquarium activated carbon, version to print with FDM and SLA.
I seem to be slightly obsessed with magnets at the minute after building a bentobox v2. https://www.printables.com/model/272525-bentobox-v20-carbon-filter-for-bambu-lab-x1c-enclo I have been inspired by it to build a similar little box…
Update: I updated the compartment and offer two version of that – see below for the differences. If you use a Levoit Core 300/300s Filter (replacement), you can add with this model an additional compartment to fill with activated carbon.…
Why the filter? Filter design will not interfere with internal spool or the moving bed! Apart from significantly cleaning the air inside the printer chamber the filter will also circulate the hot air in the chamber and will help it heat…
What happens when Labubu decides to drop the spooky vibe and go full kawaii? You get THIS fluffy overload! With those oversized eyes, an award-winning smile, and fur softer than your favorite blanket, this little mischief-maker is ready…
Hepa and charcoal filter for Bambulab X1C. Ideal for printing ABS. What you need: 120mm fan: https://www.amazon.de/gp/product/B06XQWMFDQ/ref=ppx_yo_dt_b_asin_title_o09_s01?ie=UTF8&psc=1 120 mm Hepa filter:…
Can be used with any fitting enclosure by making the necessary holes, but is made to fit in this enclosure: https://www.printables.com/model/329918-flsun-v400-enclosure-cover I have adjusted Amazon62's top plates in the following remix to…
Aire is a refillable activated carbon filter mod designed for the Ikea UPPATVIND filter.
This is a remix of Deltapie's “passive activated charcoal filter” (found here: https://www.printables.com/model/119879-passive-activated-charcoal-filter), but with a screw-on top to allow for the easy exchange of carbon. Construction is…
I upgraded the IKEA UPPÅTVIND air purifier to make it more useful for 3D printing. The stock filter works well for particles, but it doesn't do much for VOCs and odors. So I designed a 3D printable add-on that adds an activated carbon…
Wanted to create a filter for reducing fumes and odors (VOCs) that come out of molten plastics when printing at home so activated carbon pellets was the way I wanted to go than a some airpurifier/vacuum cleaner/car fresh airfilter because…
This small box is suitable for all Bambu Lab printers. In order not to always have to buy (and throw away) the expensive filters from Bambu Lab, the idea to print a reusable box for carbon pallets is obvious. I bought this activated…
Small filter with activated carbon and HEPA. I already use Nevermore in my enclosure, without space for another, so i desinged a simple filter to help out with ABS fumes. My version uses 6x3 magnets. 3 to mount to the frame, 2 are…
Print instructions: Printed on a single bed, this mobile pendant, its 32 mobile sections have limited rotation with its upper and lower sections at 15 degrees, thus forcing it to rotate in a beautiful spiral. No supports are needed, a…
This air filter with activated carbon pellets helps to reduce the fumes/smells from printing ABS or ASA by recirculating the air inside the printer. This also helps to create a more even temperature throughout the build chamber. Make sure…
Here is my take on AirFilter for Voron 2.4 and other Printers: 2022.4.03 Update: new adapterplate V2.stl You need: 2x 5015 blower fans (confirmed fitment with Winsin brand, but same as used in nevermore micro) 16x 6x3mm magnets (same as…
You can use activated carbon pellets with my version. The unpleasant odour when printing ASA or ABS is reduced very well. IMPORTANT !!! You should be aware that despite the filter, toxic gases still circulate. So only process these…
This filter for the Creality K1 series printers allows the user to add more activated charcoal for an enhanced exhaust air filtration. The mount of the filter matches the geometry of the stock filter and therefore this filter attaches to…
This is a refillable alternative to the original activated carbon filter by Bambu Lab. After printing the model created by @TechwithKramer I realized that the airflow could be more restricted compared to the mesh used by Bambulab in their…
Fill with activated carbon to filter VOCs and odors from 3D printer exhaust. I made this specifically for the Qidi Q1 Pro. It fits in the external holder you can find here.…
I started using ABS and PETG a lot in my prints and started noticing funky smell during and post print without realising that these filaments give off some nasty fumes. Previously I conceptualised and came up with Tingkat - Creality K1C…
This is an activated carbon filter that I designed for the 3D printer enclosure by enclosure lab. Activated Carbon: I recommend purchasing Voron-branded activated carbon locally to avoid rusting the metal bolts in your printer. Attachment…
INSTRUCTIONS Use PETG, ASA, ABS or other temperature resistant filament - PLA will probably not survive For assembly, all you need is 9 standard 6x3 magnets (10 if you want to print the box removal tool) There is a 0.25mm tolerance for…
使用4020风扇的迷你空气过滤器，我不是很相信活性炭的效果所以只做了一个很小的装置
You will need a 80mm x 25mm computer fan
This is a remix of FilterRing which is somewhat a remix from Nevermore Voron filter. All credits go to https://github.com/songcq/FilterRing https://github.com/nevermore3d/Nevermore_Micro#sourcing-the-proper-acid-free-carbon : Do not, I…
Funny Sign - "Did you know that 14 muscles are activated...", printed in ZIRO Black and Overture Matte White PLA. For more funny signs see my (growing) collection of them here -…
I wanted an activated charcoal air filter for the flip top LACK enclosure of my Qidi 6.08 mono resin printer. There was sufficient room in the enclosure for a fairly large filter element. I built a filter core sized around the intake of a…
Please Note: Fan should be installed to pull air through the filter and exhaust out towards the back, this gives you the max performance of both the fan and the filter, and will stop crap from building up on the fans. Update: I have…
Replaces the original cap to accommodate inexpensive activated carbon granules available anywhere, while also increasing the quantity of activated carbon. The STL files are divided into the outer shell, the top cover, and the replaceable…
This is Version 2 of my activated carbon insert for multiple Air Purifiers made by Xiaomi which use the SCG4026GL filter and it's variants. My first version (…
Fidget button, activated by a cog. I created this version to allow the button to be extended, as long as desired. It doesn't have the satisfying click of the Super Toggly Fidget Button, but it's still a fun fidget. Inspired from: Super…
I now have a growing number of printers and have growing concern about particulate microplastics and VoCs from printing with various polymers in my printing space. So, I wanted a reasonably quiet, always-on air filter. I selected some…
Drop in to use activated charcoal. pellets are chips Print Settings 0.2 Layer Height 6 perimeters, 0 Top, 0 Bottom, 20% infill Rectangular Pattern, no supports required Printed in PETG
Update 1 Added a 6x3 magnet version for the carbon container, you will not need the turning tool anymore and instead will need to source 8 to 10 6x3 magnets. Removing the lid can be easily done by using some tweezers inserted into the…
This is a recreation of the infamous Voice Activated sticker for use in the most creative places you can think of. Hand dryers and printers are the best! This design has the ability to use up to 3 colors (Background, Works and Icon, and…
The Carbon Aktivist - activated carbon VOC and odour filter EDIT - Top tip … I also use one of these as an air filter when I'm soldering Attach or place in or near any 3D printer or enclosure in order to help keep you healthy and clean…
I came across the model of RevHazlett and the remix from Spifer and decided to create a remix as well minimizing the design and making it a bit more suitable for my needs. Printing: For the Fan Cover simply remove all solid surfaces and…
Simple duct to allow the use of off the shelf activated carbon filters. Model comprises of the duct that replaces the fan vent on the back and uses the existing screws and nuts, and a cap. It is designed so that the filter is a push fit…
just a simple holder for activated charcoal pellets. great for closed smelly areas(shoe closets, fridge) you can adjust the fill ratio for smaller pellets g-code is designed to make 2 of them so if you want to make only one, please use…
No support needed, ABS or PETG, drop granular activated carbon for air filters >2 mm, use glue to stick to the standard filter insert
This is a remix of the filter box by 1C1OOCC. It is scaled to 90% for you in order to fit the Elegoo Mars 2 Pro. Otherwise, no other modifications were made to the original. Parts were organized to help people print the parts in order. It…
Gridfinity 2x3 bin that will hold 2 Bambu Activated Carbon Filters
It is equipped with a high quality, very quiet S and P 160 TD fan which can be adjusted in two steps up to 160m3/h. Due to the calculated pressure it is suitable for air filtration against pollutants and especially odours on a high level.…
There were no filters out there that met all my requirements. The requirements are: Low profile to minimize distance between printer and back wall. Filter exhaust exits to either side so as not to interfere with removable top or MMU.…
Components : Filter P3D-R (HEPA13 + activated carbon) H12 fan DC 24V power supply Remote control EPDM gasket … Key Features 1. Minimize harmful emissions Incorporates a HEPA13 filter to trap harmful ultrafine particles (UFPs) emitted…
Warning: check that there are no collisions with the printer after installation General Information This Model was inspired by BentoBox v2.0 Carbon filter for Bambu Lab X1C, enclosed P1P & Voron Trident & others? I printed out the…
BOM all printed parts printed in ASA/ABS/PA/PC (or whatever is heat resistant) 3x M4 heat inserts 3x M4*12mm screws 65mm GPU Fan (i used a “BFB0712HF 65mm 12V 1.8A Graphics Card Cooling Fan for GTX Titan GTX980”) jst ph 2.0mm connector or…
I decided to model my activated carbon filter box for a Bambu Labs X1C, using the Mac Pro hole formation as inspiration. Mac Pro drilled hole details: https://saccade.com/blog/2019/06/how-to-make-apples-mac-pro-holes/ The top cover slides…
I designed this filter holder for the QIDI Q1 Pro to improve air filtration inside the enclosure. It features a simple, clean design that requires no additional hardware – just press-fit it into the two existing holes located on the back…
Overview VOC Scrubber is a combined VOC and HEPA filter using activated carbon pallets to remove fumes and particles generated during 3D printing. Initially developed with the Voron 2.4 in mind, it should also fit Voron Tridents and other…
This is a simple stand to clip Nevermore Micro V4 and make it stand on a table. This allows the filter to be standing upright without attaching to anything. Useful for printers like Original Prusa i3. Additional Parts: (2x) M3 x 5 x 4…
This model is a modular activated carbon insert designed as a filter extension for the Xiaomi Air Purifier 4 Lite. It enhances air purification efficiency by adding a layer of granular activated carbon in the space between the inner…
You can use 8cm 4 pc fans to be exact. It also has a 24cm x 10.5 cm x 0.3cm activated carbon filter on the grid. Instead of the 8cm fans, you can put a turbine at the outlet with a 10cm diameter tube.
this filter uses: 2x 40x40 coolers, the stronger, the better 1x hepa filter for Mondial Robot RB-03 and some activater charcoal pellets. printed in PLA, 10% infill, only one piece required suports, 0.2mm layer height.
This is my improved design, which now also has an attachment for activated carbon. Only Part B for the carbon filter requires support. If you want to use it without the carbon filter, only print the main body and part a BOM: 4 x M3 Screws…
Aire is a refillable activated carbon filter mod designed for the Ikea UPPATVIND filter.
https://www.buymeacoffee.com/rockyprattastic
Bolt-on Filter box for refillable activated carbon. ..I just wanted to have an alternative to the orig (expensive) cartridges that are for sure never at hand when you need them. it replaces the metal guide and lid as well for…
Purpose A 3D-printed fan unit that attaches to the FY0293/30 HEPA filter by friction fit and pulls air through the filter . In the model, the air outlet side can be recognized by the built-in fan grill on PART 1 . Required parts HEPA…
I will describe some print settings I used, but just use what you would normally use. Most important is to pay attention to the infill of the cassette, because it has to fit the activated carbon in the main section and the front has to be…
Filter uses a 4010 12v fan no mounting hardware needed. Filter head has some room for making connections and connectors. It uses (pepersap) replacement filters. Approx. 61mm x 84mm HEPA filters with activated carbon. Google will find them…
I still had some 13*13*1cm activated carbon filter sheets, so I decided to design this filter housing, it uses 6mm magnets, I have 5 of 0.9mm thickness stacked in each corner, it's what I had laying around. Attach it over the case fan…
The official enclosure for the Sovol SV08 exhaust fan has a flimsy, thin foam filter. I wanted to use either an activated carbon filter or a HEPA filter. I designed a holder that accommodates these filters. I printed it with PETG, and it…
With Voron0 I have observed that sometimes, chamber's temperature becomes too high. This is especially problematic, when running CANBUS and canboard MCU gets close to it's max temperature of 85 C. Opening lid or door is not a solution,…
Behälter , um eine zusätzliche Menge an Aktivkohle in den Luftstrom des Reingers einbringen zu können. Zum Zusammenbau nur mit einerm luftdurchlässigen Rieselschutz auslegen und Aktivkohle einfüllen. Der Deckel ist flexibel und lässt sich…
A simple Hepa & Activated Carbon Filter & Fan Box I created for my custom made 3D Printer enclosure. There are several similar prints here but none of them fitted my 3D printer enclosure design or I could not find the required filters, so…
I couldn't find a fume extractor that used activated carbon media (that I already had a 5 lb bag of), so I designed my own. Buying this media in bulk is a lot less expensive than buying carbon filters. I went a bit crazy and it is powered…
Instead of constantly having to change out carbon pouches, I made this insert for my Litter Robot 3 to hold activated carbon granules ( I bough a big container on Amazon). Just pour a little in and the lid snaps on. It fits snugly in the…
Allows the built in blower fan to filter air. Includes recesses for 10x3mm magnets to attach to chamber bottom and sides. Requires extension of the auxiliary fan cable for reposition.
