P
PrintablesShionS
Backpack Strap Adjuster (25mm)
An adjuster for nylon straps commonly found on backpacks. This one fits 25mm wide straps.
- Downloads
- 1,515
- Likes
- 144
- Rating
- 5
Search results: adjuster
352 models
P
PrintablesZenfunk
Very Printable Strap Adjuster
This is my design of a Strap Adjuster (Belt Buckle, Ladderlock, Tension Lock etc.). Unlike many other designs, this works fine and is very printable. No Supports, no weaknesses due to our slightly weaker 3d- printing materials. Just slice…
- Downloads
- 1,437
- Likes
- 181
- Rating
- 4.96
P
PrintablesShionS
Backpack strap/webbing adjuster (Parametric)
A parametric FreeCAD model, within the spreadsheet there are 3 simple parameters: Width - set the width of the nylon strap you wish to make a buckle for EndThickness - set the thickness of the material on either side of the strap Depth -…
- Downloads
- 836
- Likes
- 113
- Rating
- 4.88
P
PrintablesDavid S
Dillon Powder Adjuster Knob
For a more convenient knob, insert a magnet into the slot. The magnet should be somewhere smaller than 0.315 in.
- Downloads
- 789
- Likes
- 48
- Rating
- 4.4
P
PrintablesMitch Muske
BMW E90 A/C Vent Adjuster
I created this for my 2011 E91, but it may fit others. Just pull the other parts out of the vent and snap this one on.
- Downloads
- 740
- Likes
- 73
- Rating
- 4.67
P
PrintablesOscar A
Dillon powder adjuster
V2: Adjuster is now indexed in reverse (increase in weight increases in index). Arrow and plus/minus signs are wider.
- Downloads
- 734
- Likes
- 61
- Rating
- 0
P
Printablesh1x
Ring Adjuster (Different Sizes)
Ring Adjuster (Different Sizes) – Keep Your Rings Secure Got a ring that’s too loose? Instead of letting it wobble or slip off, use this Ring Adjuster for a snug, comfortable fit. Designed for affordable fashion rings, this simple tool…
- Downloads
- 685
- Likes
- 25
- Rating
- 4.5
P
PrintablesSamotrel
Strap adjuster 30-50mm
I suggest to print with 3 perimeters and 100% infill. PETG, ABS, or Nylon.
- Downloads
- 683
- Likes
- 38
- Rating
- 4.67
P
PrintablesArthur Grigoryan
Creality Ender 3 V3 SE KE bed level adjusters
Creality Ender 3 V3 SE KE bed level adjusters If you lost it or want to improve it, no matter how your printer is configured, you will still get two. If so, 14mm and 16mm. Print at least with ABS plastic. My MODS for Ender 3 V3 SE, KE…
- Downloads
- 680
- Likes
- 102
- Rating
- 0
P
Printableskanga
Strap Adjuster - Two Parts
One strap adjuster on my backpack broke, and one of the straps is sewn into the backpack, so I went looking for a two part adjuster online. All of the 3D printed solutions I found were too weak to use with PLA filament or required…
- Downloads
- 676
- Likes
- 170
- Rating
- 5
P
PrintablesLine Arc Line
15mm Strap Adjuster (Parametric)
This parametric strap adjuster is set to 15mm, but can be adjusted to plenty of sizes by changing the parameters in the Fusion 360 file!
- Downloads
- 596
- Likes
- 74
- Rating
- 5
P
PrintablesPhrilten
Strap adjuster Clip 25 mm Buckle Backpack
I designed a replacement for a broken buckle from a Backpack.
- Downloads
- 561
- Likes
- 55
- Rating
- 4.33
P
PrintablesDan Vaas
Strap Adjuster
🌟 Enjoyed this 3D model? Share your creation! 🌟 If you’ve printed and loved this design, I’d be thrilled to see your make! Post a photo so I can celebrate your creativity. Your feedback and support inspire me to keep designing more…
- Downloads
- 549
- Likes
- 50
- Rating
- 5
P
Printableskennyd1gital
SuperPINDA Precision Adjuster for Prusa i3 MK3S+
Introducing the SuperPINDA Precision Adjuster! The SuperPINDA Precision Adjuster (SPA) is an integrated mount and adjustment tool for the SuperPINDA probe. This first version is specific to the Prusa i3 MK3S+, however the Drill Bit…
- Downloads
- 542
- Likes
- 184
- Rating
- 4.91
P
PrintablesLiam_Plumridge
Raspberry Pi Camera Lens Adjuster
Lens adjuster for Raspberry Pi Camera. Modeled this on the RPi Camera 2.0 that I have Printed mine in PLA, 0.2mm The case I've mounted my camera in is from:…
- Downloads
- 486
- Likes
- 73
- Rating
- 4.86
P
Printablestw
Shimano Hollowtech II Crank Preload Adjuster
This is a simplified version of mckgyver's preload adjuster tool for Shimano Hollowtech II cranks. While mckgyver did most of the work, I've made a few adjustments to make the model easier and quicker to print by removing the concave…
- Downloads
- 474
- Likes
- 26
- Rating
- 5
P
PrintablesYosuke
Ikea LACK enclusure level adjuster feet low profile
An adjustable feet for Ikea LACK enclosure. I designed it for my enclosure that has one additional LACK tabletop plate at the bottom. However, you may also use it for the table legs directly. It's equipped with M24 thread that enables to…
- Downloads
- 448
- Likes
- 107
- Rating
- 4.83
P
Printablesrazvan.cristea92
BMW E39 headlight long adjuster
This is the BMW E39 headlight long adjuster with all the injection mounding features removed. Place the part with the biggest flat part on the printbed, the ball cuts also indicates this. I recommend PETG or ABS and as much as possible to…
- Downloads
- 436
- Likes
- 40
- Rating
- 0
P
Printablesbogdankecman
SeatBelt Positioner / Adjuster
You ever had a problem that seatbelt is scratching your neck, or in case you have them going over your sensitive parts on the chest? This little thing will allow you to add a forth point of contact on your waist so that belt going over…
- Downloads
- 435
- Likes
- 38
- Rating
- 5
P
Printablesrazvan.cristea92
BMW E39 headlight short adjuster
This is the BMW E39 headlight short adjuster with all the injection mounding features removed. I recommend PETG or ABS
- Downloads
- 417
- Likes
- 42
- Rating
- 0
P
Printableskaytec
Anycubic Kobra neo 2 Anti-vibration feet, fine level adjuster and noise reducer / Antivibration Fuß höhenverstellbar
Anycubic Kobra neo 2 Anti-vibration feet, fine level adjuster and noise reducer / Antivibration Fuß höhenverstellbar feet → 0.4 Nozzle → 0.2 mm Layer Height, → 15 - 25 % infill, → TPU spacer → 0.4 Nozzle → 0.2 mm Layer Height, → 50 %…
- Downloads
- 403
- Likes
- 45
- Rating
- 5
P
PrintablesdeKay
Tenere 700 (T7) screen height adjuster
SCreen height adjusters for the Yamaha Tenere 700. STL file for left side included, mirror in your slicer for the right side. Print at 0.2 layer height, the model contains a single layer to be drilled out for the mounting holes, so no…
- Downloads
- 383
- Likes
- 22
- Rating
- 5
P
PrintablesAndrey E
Belt tension adjuster for Flashforge Adventurer 5m
Part for manual belt tension adjustment FF AD5M. Made for 20mm+ M3 screw and M3 heat inserts. To add slight length and protect motors consider to use included caps. This adjuster meant to push motors towards the frame and decrease tension…
- Downloads
- 347
- Likes
- 117
- Rating
- 5
P
PrintablesDJ_Designs
3DO Enclosure CAM focus adjuster
make sure you don't over extrude when you print this (top wall is 0.6mm)
- Downloads
- 327
- Likes
- 24
- Rating
- 5
P
Printablesquinkq
SRAM DUB Bottom Bracket Preload Adjuster
SRAM Bottom Bracket Preload Adjuster - MPN: 11.6418.001.001 Modeled replacement for myself after breaking the original (ordering aluminium one from ali probably would have been more time efficient). Printed out of PETG 40% infill months…
- Downloads
- 322
- Likes
- 30
- Rating
- 0
P
PrintablesTickTock
MMU2S Extruder Filament Sensor Micro Adjuster
Update: This part was recently changed. If your extruder was manufactured after February 2021, you should use the 2021 version. Earlier printers will have to use the other. I found it very difficult to set the very sensitive extruder…
- Downloads
- 311
- Likes
- 44
- Rating
- 4.83
P
Printableskennyd1gital
SuperPINDA Precision Adjuster for Prusa MINI/MINI+
The same great SuperPINDA Precision Adjuster for the MK3S+ , now available for your MINI/MINI+! The SuperPINDA Precision Adjuster (SPA) is an integrated mount and adjustment tool for the SuperPINDA probe on your MINI/MINI+. Overview: The…
- Downloads
- 290
- Likes
- 90
- Rating
- 4.8
P
PrintablesRobert Rosenbaum
Seatbelt Adjuster Clip
This lightweight clip will help to adjust the length and positioning of your seatbelt strap. It is printed with PLA at 100% infill.
- Downloads
- 285
- Likes
- 18
- Rating
- 4.75
P
PrintablesFishbone Workshop
Strap Adjusters Bundle (with STEP and Fusion parametric model)
How to print it? It doesn't matter what kind of filament you use, this design works the same when printed with PLA, ABS or PETg. I tested similar design printed with PLA and it lasted more than a year of everyday using. How to use user…
- Downloads
- 282
- Likes
- 57
- Rating
- 5
P
PrintablesMrDaedalus
Cord Adjuster
I had a few of these make of aluminum and some extra filament I needed to use up so I decided to sketch one out and see how they work. While I wouldn't trust them with my life I very unscientifically discovered that they can hold 30lbs.
- Downloads
- 281
- Likes
- 53
- Rating
- 5
P
PrintablesMauri_F
loop adjuster for padel racket
My padel racket loop did not come with a wrist loop adjuster so I designed this one and printed it with TPU. It's simple but does it's job very well, it holds the position the whole game.
- Downloads
- 275
- Likes
- 29
- Rating
- 5
P
PrintablesSnobbyComa8
Backpack Strap Adjusters / Buckles
3D print a replacement backpack strap adjuster! I recommend printing from a strong filament such as ASA or nylon. There is a model file for a thin version and a (barely) thicker version. Both should be plenty strong for an average…
- Downloads
- 273
- Likes
- 49
- Rating
- 0
P
Printablesbluefin66
Backpack Strap Adjuster
Remix of https://www.printables.com/model/30496-very-printable-strap-adjuster by @Zenfunk, with ideas from @gloda: Added slot so it can be attached to closed strap loops (without re-stitching). Added fuzzy skin to the bar making contact…
- Downloads
- 269
- Likes
- 29
- Rating
- 5
P
PrintablesDzyn3D
Arm Rest Height Adjuster - Parametric (designed for use in VW Polo AW - should fit Audi A1 / SEAT Ibiza + more)
Quickly threw this together at the request of my nephew for his car - concept and size roughly based on a few examples I saw on the market, exact angles and dimensions down to your own needs … made it parametric so he, and now you can mod…
- Downloads
- 253
- Likes
- 18
- Rating
- 5
P
PrintablesLoosiu
Bra shoulder strap adjusters fix
A washing machin has teared my wife bra shoulder strap. Both ring and "eight" were destroyed. The fix was needed - infant feeding bra. Open designs were made to avoid ripping and sawing strap loops - stitches with high load and…
- Downloads
- 244
- Likes
- 25
- Rating
- 5
P
Printablesfrez_knee
B6 A4/S4 Headlight Adjuster Gears
These are replacement gears for the headlight adjuster mechanism on my B6 A4 with bixenon headlights. The gears often break or strip leaving you with no way to adjust the aim of the headlights. The assembly shown is for the up and down…
- Downloads
- 231
- Likes
- 17
- Rating
- 0
P
PrintablesLWW
Bag Strap Adjuster (Ladder Lock Buckle)
A heavy duty strap adjuster for up to 32mm straps. Includes a tab for ease of grabbing onto it when making adjustments, friction features to secure straps well, and rounded edges for comfort. STEP files included for ease of customization,…
- Downloads
- 222
- Likes
- 30
- Rating
- 5
P
PrintablesEcapox
Dual adjuster ladder lock HBZ
I took some inspiration from some super fancy metal ladder lock adjusters that I saw on Facebook that people use for headbands and decided to design one myself. I made three different sizes if you wanted to use it for headbands, belts or…
- Downloads
- 204
- Likes
- 11
- Rating
- 5
P
PrintablesMike81622
Glock Rear Sight Adjuster
Since all new Glocks usually come with their rear sights off center, I wanted a simple tool to be able to adjust the rear sight in both directions. This tool will work for all 9mm Glock Pistols with a 25.5mm wide slide and a 6.1mm / 6.5mm…
- Downloads
- 198
- Likes
- 30
- Rating
- 0
P
PrintablesEvgeniy Trunin
Belt tension adjuster for Flashforge Adventurer 5m (nut version)
Part for manual belt tension adjustment FF AD5M. Made for 20+mm M3 screw and M3 nut.
- Downloads
- 196
- Likes
- 56
- Rating
- 5
P
PrintablesMaker Mike
Larger Voron 0.1 Bed Level Wheel Adjuster
A larger adjustment wheel for the Voron 0.1 3D printer. Allows for finer and more precise adjustment when bed levelling. This wheel is 25 mm diameter compared with the standard 17 mm wheel. Add an M3 heat insert after printing to fit M3…
- Downloads
- 195
- Likes
- 30
- Rating
- 5
P
Printablesmaxelman
Enviolo shift cable gauge / adjuster
Same as this paid tool: https://www.ebike24.com/enviolo-shift-cable-gauge Painted 3MF file included for Bambu Studio Used on a Tern GSD
- Downloads
- 192
- Likes
- 13
- Rating
- 5
P
PrintablesFubuki Lab
Strap adjuster 20mm
I shortened it to 20mm and added a 0.5mm chamfer to the bottom. 20mmに短くし、底面に0.5mmの面取りを追加しました。
- Downloads
- 187
- Likes
- 14
- Rating
- 5
P
Printablesdantech
Adjuster buckle
Adjuster buckle Category: Fashion --- If you are interested in supporting my work and gaining access to the original STEP file of this model, I now offer the opportunity to receive it through a small donation. The STEP file will allow you…
- Downloads
- 180
- Likes
- 20
- Rating
- 0
P
PrintablesJan Surała
Very Printable Strap Adjuster for 40mm strap
This is a remix of the "Very Printable Strap Adjuster" by Zenfunk remodelled for wider strap (40mm)
- Downloads
- 176
- Likes
- 21
- Rating
- 5
P
Printablesmattmak3s
Adidas Padel Racket Strap Adjuster
Adidas strap adjuster for padel racket to help shorten the strap
- Downloads
- 171
- Likes
- 11
- Rating
- 0
P
PrintablesKubiV
Tent Rope Adjuster/Tensioner
Adjuster/Tensioner for a rope. Typical use on tent ropes. See photos to see how to use this element. Use with 3 mm rope.
- Downloads
- 167
- Likes
- 31
- Rating
- 4.5
P
PrintablesJesse Mayer
Ankermake M5 belt adjuster „Y“ axis
Ankermake M5 Y Axis Belt Adjuster
- Downloads
- 161
- Likes
- 19
- Rating
- 5
P
PrintablesLukasz Filipski
Slim Strap Adjuster with opening - for continous straps, no cutting!
This a remix of a great design by Xuis - I remixed it to be less bulky while providing just the right amount of friction/tension and allow it to be placed on the strap without cutting/removing it. 20 mm version, more coming soon
- Downloads
- 151
- Likes
- 19
- Rating
- 5
P
Printableshuskyte
Window Adjuster Holder (Fenster-Arretierung)
Pretty simple window holder with ball bearings (10x4x3 mm, if you want to skip on them just print them as plastic bearings). Designed in F360 and prints really well. You will need some screws out of your Prusa spare bag including hex…
- Downloads
- 151
- Likes
- 42
- Rating
- 5
P
Printableshorrovac
Field Repair Backpack Buckle (locking adjuster) 20mm
Print in orientation shown for maximum strength (layer orientation optimisation), then snap together with the latch orientated upwards. Remove the old buckle (use pliers to break it if you need to), and insert the longer bit of the split…
- Downloads
- 149
- Likes
- 20
- Rating
- 5
P
PrintablesIDVert3X
KTM 390 Adventure Fork Adjuster Dial Cap
I designed this cover to prevent random people walking around my bike from changing my suspension settings. Yes, I'm that paranoid. As an added bonus, it makes the bike look nice, stealthy if you will. It's a friction fit part that…
- Downloads
- 148
- Likes
- 11
- Rating
- 5
P
PrintablesMRLeach85
Creality K1 Max X-Y Belt Tracking Adjuster
Tired of squeaky belts? This little adjuster gives you easy leverage to adjust the angle of the tensioner pulley, while tightening down the screws, to align it to the drive pulley. This will allow the belt to track in the middle of the…
- Downloads
- 147
- Likes
- 41
- Rating
- 5
P
PrintablesLaceSpades
Shure SRH840 SRH440 Toughened Headband Adjuster Joints Headphones
Cheap and long-lasting repair of critical design flaw in Shure SRH-840 headphones. I've owned many pairs due to them all failing by snapping at the connection between the pivot block holder and the adjustment arm My one pair of SRH-940s…
- Downloads
- 140
- Likes
- 4
- Rating
- 5
P
PrintablesSkullKill
Adjustable Strap Elastic band Adjuster - 12mm
Migrating from thingiverse https://www.thingiverse.com/thing:4281713 Adjustable Strap Elastic band Adjuster - 12mm good for face mask e.g https://www.thingiverse.com/thing:4281750 FreeCad 0.18 design file included
- Downloads
- 139
- Likes
- 21
- Rating
- 5
P
Printableskotana
CFMOTO 450MT / IBEX450 FORK Preload Adjuster
The fork preload adjuster for the CFMOTO 450MT / IBEX 450. It’s designed to fit very tightly, so you need to tap it in with a hammer during installation. Once installed, it stays in place securely unless it receives a direct hit. I’ve…
- Downloads
- 127
- Likes
- 8
- Rating
- 0
P
Printablesxorvious
Creality K1 Leadscrew Z Adjuster
First model! I noticed that my K1 had vertical play in the rear Z leadscrew, appx 1 mm. It didn't seem to effect my prints much, but there is for sure the possibility of movement during a print. I had no luck adjusting it via the grub…
- Downloads
- 127
- Likes
- 39
- Rating
- 0
P
PrintablesDesignAndBuild
Strap Adjuster - Tri-Bar Adjustable Slider - Designed for Nylon, PETG, PLA
Strap length adjusting device for webbing or fabric. Who knew it was officially called a Tri-Bar Adjustable Slider?! Designed for 45mm - 50mm fabric or webbing Can easily be scaled to fit other widths. See video below for some generic…
- Downloads
- 124
- Likes
- 20
- Rating
- 0
P
Printablescjnaz
XY Adjuster for MINI/+
Problem statement: The MINI's XZ tower does not have a squaring/alignment mechanism, possibly resulting in an X-Y non-90-degree skew. This skew really matters when printing pieces that have to mate together. This adjuster piece and…
- Downloads
- 124
- Likes
- 50
- Rating
- 5
P
Printablesdasfrodo
BetaFPV Air 65 / 75 Camera Angle Adjuster
The Air 65 and 75 have a rather aggressive camera angle out of the box, even on the "lowest" setting, which can make them rather challenging to fly indoors, especially as a beginner. To fix this I modelled this tiny "adapter" piece, that…
- Downloads
- 123
- Likes
- 20
- Rating
- 0
P
PrintablesTom Loveday
Z axis adjuster for Longer B1
This part allows you to adjust the z axis of the longer B1 Laser. Use two brass threaded inserts that are m4xH10 the lower one should have the threads drilled out it is just to keep the screw from wobbling. The laser head wobbles a bit…
- Downloads
- 121
- Likes
- 5
- Rating
- 0
P
PrintablesFxWoody
***NEW VERSION *** Qidi Plus 4 *BEACON* bed adjuster
***ATTENTION !!! SOME NEWER MODEL DO NOT HAVE THE 4 HOLES FOR THE PLATE TO BE SCREWED ON …. YOU WILL NEED TO MANUALLY DRILL THEM *** Design these spring adjuster to replace the ones mounted with the PIEZO's on the QP4 bed. In order to use…
- Downloads
- 119
- Likes
- 45
- Rating
- 0
P
Printablesfriedmann_martin
Škoda Scala armrest adjuster
This is a little height adjuster for the Skoda Scala (2019 and later). Since it isn't height adjustable I had to make this little thingy to make it high enough for my girlfriend (her car). Only printed the 40mm one, the others should just…
- Downloads
- 116
- Likes
- 10
- Rating
- 4.67
P
PrintablesMaker Space 307
Swim Goggle Strap Adjuster
Keep those swim goggles from going to the landfill when one of the adjusters gets lost. The elastic used on these goggles is about 7.2 mm wide and around 1.0 mm thick, but this model should work with other similarly sized straps.
- Downloads
- 106
- Likes
- 13
- Rating
- 5
P
PrintablesSwagga5aur
Worx landroid cutting height adjuster
My worx landroid (WR143E) had an accident with some rocks which caused the cutting disc to explode and the height adjuster broke. Took the landroid apart and found the broken pieces, glued it back together to have a base to measure from.…
- Downloads
- 104
- Likes
- 7
- Rating
- 0
P
PrintablesJB
Buckle adjuster
Light weight buckle adjuster to fit 25mm width elastic Holes are 26mm x 3mm Printed in PETG with 0.16 layer height
- Downloads
- 102
- Likes
- 10
- Rating
- 5
P
Printablesgyrex
Triumph T3880104 - Swinging Arm Adjuster Wrench Tool
I haven't tested this yet but I'll be doing the 20K km service on my Street Triple soon and need this tool. Let me know if there are any issues with it. Designed for a 22mm socket. You'll need to consult your service manual for the torque…
- Downloads
- 99
- Likes
- 2
- Rating
- 0
P
PrintablesSpline Design Works
Buckle Webbing Adjuster 15mm
Print Settings: -PLA +/PETG -80% Infill -Mostly <1.5 grams per item I used Ender 3 V2 to print this item. Thank you
- Downloads
- 98
- Likes
- 9
- Rating
- 0
P
PrintablesOlehander Shevchuk
Plastic Adjuster Fastener
Plastic Slider Tri Glide Adjust Buckles Size inside holes size for 30mm strap (you can resize to any size)
- Downloads
- 94
- Likes
- 9
- Rating
- 5
P
PrintablesHD_Creator
Raspi Camera for PrusaMini with articulated arm and ball joint adjuster
This is a housing for the RaspberryPi night-and-day cameras that typically come with two IR lights. Also part of this publication is an articulated arm with ball joint to fine adjust the camera angle. In my case the articulated arm is…
- Downloads
- 94
- Likes
- 10
- Rating
- 0
P
PrintablesJack
Adjuster
Assembly: Point the ring mark to the coarse side and screw completely on it. Align the other thread and screw back Each turn will now move the sides 0.5mm apart (expanding)
- Downloads
- 94
- Likes
- 46
- Rating
- 5
P
PrintablesBasementLAB
MAZDA 2-3-CX5 - Seat Guide Adjuster Unit Protector - End Cover Plate - Cover slitta sedili anteriori
MAZDA 2-3-CX5 - Seat Guide Adjuster Unit Protector - End Cover Plate - Cover slitta sedili anteriori Spare Part Number: KD45-88-091 02 - KD458809102 - #88167A Fits: CX-3, CX-5, CX-9, Mazda2, Mazda3, Mazda6 Resize to adjust dimension If…
- Downloads
- 93
- Likes
- 16
- Rating
- 0
P
PrintablesMuddle
KTM Fork compression adjusters
KTM Fork compression adjusters - should fit most all WP forks
- Downloads
- 92
- Likes
- 9
- Rating
- 0
P
Printablesbriand42956
Starlink Mini tilt adjuster
I made this model to allow me to adjust the Mini's tilt angle while in the field. I have an aluminum frame around the Mini, which altered the OEM kickstand's tilt angle. The third step from the bottom of this model is the height needed to…
- Downloads
- 89
- Likes
- 19
- Rating
- 5
P
PrintablesLukasz Filipski
IKEA VARMBLIXT light diffuser / color temperature adjuster
If you've ever seen the viral IKEA VARMBLIXT on social media, then I'm pretty sure you know what this is about. This amazing lamp has one flaw - the light emitted by the stock light source has a rather cool temperature, and the lamp…
- Downloads
- 87
- Likes
- 8
- Rating
- 5
P
Printablesenque
Adjustable Elastic Strap Adjuster - 1 inch
Widened the channels for 1 inch elastic. Using elastic in the link below; Elastic Band
- Downloads
- 86
- Likes
- 13
- Rating
- 0
P
PrintablesFlat Endmill
Shokz Openrun Pro Fit Adjusters
I've never been happy with the way my shokz sat on my head. The sound quality is much better if the transducers sit closer to my ear, but the the band is too large and the transducers would not stay in place. I designed this small form to…
- Downloads
- 82
- Likes
- 11
- Rating
- 0
P
PrintablesBadger
Strap quick connect with adjusters
A series of strap connectors with a thumb release. I used a generic polycarbonate Carbon Fiber filament. updated the latch and housing to have better strength changed the layout for the housing. improved tolerances. and added positive…
- Downloads
- 80
- Likes
- 9
- Rating
- 0
P
PrintablesPatrick
Preload nut adjuster 14mm (fits perfect for CFMoto 450MT)
Print 100% infill, doesn't make sense to print hollow.
- Downloads
- 80
- Likes
- 4
- Rating
- 0
P
Printablesderfley
Hawke scope easy parallax adjuster
Simple parallax adjuster for the Hawke side focus telescopic sights. Uses a 2.5mm nut and bolt for tightening. Don't forget to orientate this to print flat in your slicer! Print Settings Printer: DMS DP5 Rafts: No Supports: No Resolution:…
- Downloads
- 79
- Likes
- 5
- Rating
- 0
P
PrintablesBrian Flores
Yamaha PW50 Throttle Adapter Adjuster
I purchased a cheap carburetor kit with cables from Amazon, for my Yamaha PW50. The cable was to short, and the rubber grommet was way to small, and would not snug fit into throttle hole. So I modeled up an adapter in Fusion 360, and made…
- Downloads
- 77
- Likes
- 5
- Rating
- 0
P
PrintablesBobS
Large 28mm Wrench or Spanner 7mm Deep Washing Machine Foot / Leg Adjuster
A very simple 28mm spanner or wrench. The spanner is 7mm deep. Made to turn/adjust the levelling feet of a washing machine ( Hotpoint WMFUG 742 ) while in situ. Printed in PLA with an infill rate of 15%, it was strong enough to do the job…
- Downloads
- 76
- Likes
- 3
- Rating
- 0
P
Printablesreserve
Sculpfun S10 Focus Adjuster
Modified @Nejc 's design without the brass inserts. You'll need a M3 and a M4 threadcutter. Works perfectly.
- Downloads
- 75
- Likes
- 10
- Rating
- 0
P
PrintablesRoyaleWithCheese
Leica Elmar Lens Hood/Filter Adapter with Aperture Adjuster
Push on lens hood/filter adapter for Leica lenses such as the Elmar 50mm F/3.5 and others that have the aperture adjuster around the front element. There are dots on the outer diameter to mark aperture positions, install with the aperture…
- Downloads
- 74
- Likes
- 7
- Rating
- 0
P
Printableskaleido~eye's monsters
Bra slider strap adjuster buckle
I made it of PETG. Layer height 0.1 mm.
- Downloads
- 72
- Likes
- 11
- Rating
- 0
P
PrintablesTony Tsai
Rockshox Rebound adjuster knob
Adjuster knob for rockshox forks. adjust for your fork Uses a 2.5mm hex key updated to have a longer grab in the middle for the key Print instructions Category: Sport & Outdoors
- Downloads
- 72
- Likes
- 10
- Rating
- 0
P
PrintablesJackint0sh
Amp Gain Adjuster Keychain
If you don't want to use a flathead screwdriver and potentially damage your Amp to adjust the gain knob, or maybe you don't always have a screwdriver, you can print this and always have one available since you're always caring your keys…
- Downloads
- 72
- Likes
- 7
- Rating
- 5
P
PrintablesHD_Creator
Rubber band adjuster for face mask
Being in the middle of a pandemic, most people are required or at least asked to wear mouth and nose covering masks in public. To hold the mask in place, we often use simple 5mm oder 8mm rubber bands (even if they are hard to get lately…
- Downloads
- 70
- Likes
- 7
- Rating
- 5
P
PrintablesShaun577
Magura MT7 Brake Bite Point Adjuster
Adds a bite point adjuster option to the levers of Magura MT7 brake systems. This allows adjustment of the amount of lever throw before the pads bite on the disc. Magura offers a BAT kit to try and do this but it doesn't really work and…
- Downloads
- 69
- Likes
- 17
- Rating
- 0
P
PrintablesMakertoMarket
BOA Fit System - Sport Footwear Adjuster
This is the down part of the system, it means the piece attaches to the shoe. It's important to say, it was 3D printed with 0.2mm nozzle because the teeth are small and with this size nozzle we got a good definition and functionality We…
- Downloads
- 68
- Likes
- 3
- Rating
- 0
P
Printablesdscarbro
Keihin PWK Carburetor Idle Adjuster Knob
Large knob to make adjusting the idle speed on Keihin carburetors possible without a screw driver. The knob presses onto the plastic knob supplied on the carburetor.
- Downloads
- 68
- Likes
- 6
- Rating
- 0
P
PrintablesSteffen
Micro adjuster for router edge guide
Microadjustment for router edge guide. Hardware needed: 1 x M8 bolt 1 x M8 nut 2 x M6 bolt 2 x M6 nut Sketchup file attached Print Settings Printer Brand: FlashForge Printer: Finder
- Downloads
- 65
- Likes
- 17
- Rating
- 0
P
PrintablesEmsup
EXT Storia V3 - HSC Adjuster
It's a tool you can use to adjust the HSC on a EXT Storia V3 rear shock. EXT is using a 12mm spanner to adjust the HSC, it's not a common tool you or your friends would bring on the trail. I printed it in PETG with 0.6mm nozzle. But PLA…
- Downloads
- 65
- Likes
- 7
- Rating
- 0
P
PrintablesOpadera
Manitou (Mezzer) Rebound adjuster knob
I lost the rebound adjuster for my Manitou Mezzer and designed this replacement.
- Downloads
- 64
- Likes
- 2
- Rating
- 5
P
PrintablesRaul Lugo
UTG Bug Buster side AO scope parallax adjuster ring, smaller version
UTG Bug Buster side AO scope parallax adjuster ring. A smaller version (~50mm) for those that may want something more compact. Made to fit the Leapers Inc., UTG BugBuster Riflescope, 3-12x32mm, 1" Tube, Side AO model SCP-M312AOD. Should…
- Downloads
- 64
- Likes
- 3
- Rating
- 0
P
PrintablesDanBau
Bosch Indego S 500 hights adjuster
Hights adapter for Bosch Indego S 500, lowest mower hight is 30mm. Adapter to get it down to 21mm. You will need 3 new m4 screws that are 10mm longer then the original ones.
- Downloads
- 62
- Likes
- 9
- Rating
- 0
P
PrintablesPaul Martin
- Downloads
- 62
- Likes
- 3
- Rating
- 0
P
PrintablesJan Lorenzen
Ikea Lack - Height Adjuster
I printed with: Material: PLA Max, Pure Black Nozzle: 0.6mm Layer height 0.16mm Walls: 2 + Alternate wall Top/bottom 3 layers = 0,9mm Infill: 15% Speed Generally: 60mm/s Outer wall: 40 mm/s Threaded with M42x3.00 to make adjustment easier…
- Downloads
- 60
- Likes
- 11
- Rating
- 5
P
Printableslayer.works
Wrench for pre-2005 Herman Miller Classic Aeron chair round "dial" knob arm adjuster
If you've got an older (pre-2005) Herman Miller Classic Aeron chair with the round “dial” knob arm height adjusters (instead of the new flip lever locks) you can find yourself in a constant battle to keep you chair arms fixed in one…
- Downloads
- 59
- Likes
- 12
- Rating
- 5