1,719 models
Modified commercial child lock. With sophisticated locking system, which is harder to open for children. There are 2 versions of lock: Print only with mounting with glue or double tape (weaker one) Stronger version with need of M3 screws.…
Print approx. €0.54–€0.67 excl. taxPreliminary estimate for one variant
Simple child lock for the seat belt buckle in the car, so that children do not unbuckle themselves! The fuse is slid over the lock before the belt is engaged. This blocks the unbuckling mechanism and can only be pushed through the small…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
Ochranná krabička na cokoliv drobného, možnost vystlat pěnovými vložkami pro lepší ochranu daného předmětu.
Print approx. €7.67–€9.37 excl. taxPreliminary estimate for one variant
A sign I created with the 4 cardinal rules of firearm safety. Can pause the print midway for color change or print using the gcode provided. Fits the Prusa Mk3 print bed.
Print approx. €4.32–€5.28 excl. taxPreliminary estimate for PETGSource material: PET
My generic step-down transformer from 220v to 110v has a front output that is just taped off. I wanted a more reselient and permanent solution - so this is it. You can, like I did, put a dollop of two-part epoxy glue to the middle of the…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
This is a remix of @DC_53232 's Child Proofing Cabinet Lock. I rebuilt this model making some changes along the way to fit my cabinets. Most notably, the screws have been moved to the bottom and the top of the model ends at the latch,…
Print approx. €0.69–€0.85 excl. taxPreliminary estimate for one variant
The Safety Doorstop prevents the door from slamming abruptly by gently cushioning it. This can, for example, prevent small children's fingers from being crushed when the door closes due to a gust of wind. This also prevents glass breakage…
Print approx. €3.76–€4.60 excl. taxPreliminary estimate for PETGSource material: PET
Drapeau de sécurité Carabine Ce drapeau indique que votre arme à feu est déchargée et ne présente aucun danger. Avec sa couleur orange, cette étiquette est très visible et rassure l'ensemble des personnes présentes et les autres tireurs.…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
I wanted something to use my extra safety razors that I don't like and so I thought make a knife. Cuts and scraps made of a simple two piece conduction the blade fits into 1 side (with the cut out of the blade) and then the other half…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
When Covid 19 hit self grooming took whole new meaning. Also with no one to meet besides family and neighbors mistakes were acceptable lol. Taught myself to give haircuts by buying a buzzer. Next I decided that ‘The Best a Man Can Get’…
Print approx. €3.06–€3.75 excl. taxPreliminary estimate for PETGSource material: PET
I printed a bunch of eric-ao's safety locks for my own drawers but ran into a few cases where the gap I had was just too narrow. Simply height adjustments to make it fit in some tighter spaces more easily. Printed at .2mm layer height in…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
This model originally from @AdamStarbuck has an interesting aesthetic and is a very useful item to have. However, after printing his original version and using it for a little while, I knocked it over and one of the holding arms broke.…
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant
Since the stand I printed originally always over as I closed or opened the drawer I keep my razor in, I decided to make my own. It features an extra thick and wide base, so it won't fall over anymore. The hole's diameter sits at 13.2 mm…
Print approx. €3.10–€3.79 excl. taxPreliminary estimate for one variant
Very minimalistic Safety Razor Stand for Safety Razors with variants for around 11.4mm or 14mm shaft diameter . Includes .STEP files if you want to adapt/remix for your needs, but if you have trouble with that I can upload more variants…
Print approx. €0.91–€1.11 excl. taxPreliminary estimate for one variant
Safety cover for M22 Eaton box. I printed from ASA and the strength is great. It is equal to the original.
Print approx. €4.07–€4.98 excl. taxPreliminary estimate for one variant
parts for : Ultegra shimano 10000 - line safety guard Part Number : RD15149
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
A simple tab clamp for bleach bottle ‘tab-lock’ caps and similar. Will accommodate caps with radius 20-50mm (external tab diameter) Suitable for anyone with a weak grip or forearm strength restrictions such as MS sufferers (one in…
Print approx. €3.20–€3.91 excl. taxPreliminary estimate for PETGSource material: PET
Magnet holder to place on top of 'lid open' safety sensor to enable laser operation with open lid. USE AT YOUR OWN RISK!!!! Printed with transparent PLA to see LED underneath. Use 10mm x 2 mm magnet. Remember to check magnet polarity…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for one variant
The screw should hold the cover with the magnet Die Schraube sollte die Abdeckung mit dem Magneten halten
Print approx. €1.11–€1.36 excl. taxPreliminary estimate for PETGSource material: PET
I printed this in PETG on my Prusa Mini+ with 0.20mm layer height and 100% infill. I only recommend enabling supports in the middle of the underside, if they attach to the outside of the stand, it will be ugly after you remove it. I used…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
Cover made for standart M6 nut (dimension 10mm between outer flat surfaces). In the cap is also space for thread what can stick out from nut(8mm) so you don't need to cut screw.
Print approx. €1.57–€1.91 excl. taxPreliminary estimate for PETGSource material: PET
This is a stand for the Mühle safety razor and brush. Recommend using organic supports.
Print approx. €2.67–€3.27 excl. taxPreliminary estimate for one variant
For safety measures we are obliged to secure certain machines from use by unauthorised users. Machines with a safety switch have a location to place a lock on, this safety lockout does the same for devices with just a regular plug on it.…
Print approx. €1.82–€2.22 excl. taxPreliminary estimate for PETGSource material: PET
pojistka na nosič kol eufab
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
The .3mf file comes with all color changes prepared for a single-extruder printer. A small “purge” tower enables a clean filament swap without a blob on the model. The original colors are: yellow-black-brown-yellow. Print with an 0.25mm…
Print approx. €0.23–€0.29 excl. taxPreliminary estimate for one variant
Hello, Today I have a Safety Object Grasper for you. It is suitable if you want to move an object without contamination. Your hands are clean , and the object is moved. For proper functionality, you need to use a Printing Profile! I used…
Print approx. €1.91–€2.34 excl. taxPreliminary estimate for one variant
Inspired by Vision Zero Vancouver's campaign Grab a Brick! Now you can print your own personal brick to protect yourself while crossing streets! Pictures at 100% and 25% scaled. Print instructions: Printable in PLA; For best results use…
Print approx. €8.51–€10.40 excl. taxPreliminary estimate for one variant
Permet de découper les carrelets pour stylo en tranches très fines sans aucun risque avec une scie à onglet electrique. Ce dispositif repose sur une table en contreplaqué avec un deuxième morceau destiné à éloigner le carrelet pour une…
Print approx. €4.01–€4.90 excl. taxPreliminary estimate for PETGSource material: PET
100x160mm sign, bearing a relevant reminder from The Mgt. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . You may wish…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
This is a functional, 3D printable cover designed specifically for Indian modular switch plates . It is ideal for covering switches that should not be accidentally toggled, such as those for smart home hubs, routers, or sensitive…
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
This safety eyes need to be printed with low layer height (0.1mm) to achieve a nice result. The eyes are made from two different parts for ease of printing (the rod and the head) that need to be glued together, and also it make it easy to…
Print with PETG Z=0,3 Attach dog rope to it and slip it into the car safety belt lock. You can also use 2 pcs and rope to fix luggage on the back seat.
Alarm Stopper Null insert Seat Belt Buckle Clip For all cars (Universal)
Safety Glasses clip for wherever you need to keep them handy. Remix of https://www.thingiverse.com/thing:2954156
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
I use this for making obstacle course for Sphero droids, but it will be great for any RC toy like cars for your kids! Size Base 45mm x 45mm Hight 57mm Wall thickness 1.2mm Main features Stackable - for easy storage Fusion360 file included…
Simple safety razor cover with touch of compliant mechanism.
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Quick and easy print that will save your fingers and time…
This is a double-edge (DE) safety razor that works with standard blades. If you've ever wanted to try shaving with a DE razor before spending the cash on a nice one, you can give this a shot for less than $0.50 of plastic! I bought a…
Print-in-place safety lock with an articulated hinge design, swivel base and a twist lock. Each end is fastened with either a screw or by double-sided adhesive tape. If you are using tape, I have included two “adhesive plates” which can…
The professionally designed travel/storage case for the Henson AL13 safety razor is a sleek and innovative solution for safely transporting and storing your razor and blades. Designed with precision and attention to detail, this…
I created this compact, powerful safety whistle from scratch to be freely shared with anyone who needs one, no questions asked. Whether you’re boating, hiking, camping, running, training scouts, or standing up for your safety and your…
A 3D printable blade disposal bin, suitable for any razor blades up to the size of a double edge safety razor . It is incredibly irresponsible to throw razors, or blades of any kind for that matter, into the normal bin, and therefore it…
Safety eye installer printed in ABS 0.6mm nozzle with 4 walls and 20% gyroid infill.
I couldn't find a safety razor stand I liked, but I found similar ones, so I quickly modeled this in Fusion 360 for fun. Print instructions Print it flat on its back, PrusaSlicer will lay it flat for you if you import the 3mf file.…
Made this box to to store used and new Safety Razor DE blades The box is specific designed to firmly store Feather Blade boxes on the sides, But it hold many other brands of blades --------------------------------------------------- My…
Remixed from a safety glasses holder I found on Thingiverse. There is a version for both the insert and the plug.
The Safety doorstop prevents the door from slamming abruptly by gently cushioning it. This can, for example, prevent small children's fingers from being crushed when the door closes due to a gust of wind. This also prevents glass breakage…
In case you don't want to file a detent pin round for your super safety switch, here is a working solution. I printed it on a resin printer with 0.05mm resolution. Feel free to share…
A Holder for my 3M Safety Glasses. VIRTUAA0 3M Virtua AP Schutzbrille VirtuaA0, AS, UV, PC I sticked some 6x3mm single-sided foam tape on where the nose is, so it fits tight, but not to tight, and it can't scratch. (not showing in the…
Hello everyone, I’ve designed a handy child safety lock for caravan windows and wanted to share it with you. This lock is specifically designed to prevent children from opening the windows on the bunk bed, ensuring extra peace of mind…
Safer Safety Glasses based on Safety glasses by Cisco3d These have hexagonal holes which are superior shape of holes. Slightly tilted for better fit. "Use at your own risk, lol" Update and second upload: I redid the placement of the holes…
This model is designed to be inserted into an electrical outlet to add safety to unused outlets, especially for babies or young children.
Tossing used blades in the trash is really bad. Tossing them in this box, and then in the trash is much less bad. NOTE: The razor blade silhouette on top is a separate solid body within the mesh of the box, you can select it in the…
Display your safety razor in style with this modern and organic stand. It has a sleek design that adds sophistication to your grooming space. The simple yet elegant design keeps your grooming area neat and uncluttered and ensures that…
A pegboard hook for hanging impact-style safety glasses. This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm diameter, 3mm thick magnets. “Board Attachment” parts are…
Lame (/lɑːm, læm/) is a double-sided blade that is used to slash the tops of bread loaves in artisan baking. A lame is used to score (also called slashing or docking) bread just before the bread is placed in the oven. To assemble you will…
If you haven't lost a tent peg or tripped over a peg slightly above the surface of the ground, or the edge of a ground sheet, you have no use for this model! If you have, read on. EASE OF USE Simply hammer in the pegs as you usually…
Simple automatic (self-locking) child safety lock for cabinet drawers. For mounting both parts you can use: high-quality double-sided adhesive tape 2 pcs small screws for hook I recommend to use adhesive tape + screw Recommened print…
I found serious security fault on vans and campervans, which can be found on all type series built from 2006 and on. In the past several years I had been employed as a chauffeur and a garage administrator in the caravan rental company,…
A quick chamber flag I made for use with 9mm Handguns/PCC. Print in a suitable colour, I like to use orange PETG for the added heat resistance. A shorter version is also added.
Second model I have ever created. Goal was to create a safety corner out of TPU filament which does not need any support to print. Use a strong double-sided tape to attach it to a corner. Print instruction 0,2mm layer height no supports…
This is a 2 tone safety whistle I designed to have a slight, two tone sound. Although I designed this from scratch, the basic shape and size is based off of another two-tube design (credit given in the remix section). This can be scaled…
The TriDE Safety Razor seamlessly combines the ease of 3D printing with the time-tested, tried, and true principles of a traditional safety razor design. Designed for simplicity, it exemplifies the following key points: Effortless 3D…
Safety Glasses Holder Remix from Byte Slinger for wall mounting. Brillen-/Schutzbrillenhalter Remix von Byte Slinger für Wandmontage. Für Schutzbrillen empfehle ich das Modell auf 110% zu skalieren. For Safety glasses I recommend scaling…
Someone at work asked me to make a replacement Safety 1st Everfit & Grow and Go car seat cup holder after his kid threw one of them out the window while they were driving. I used a caliper and copied the one he had left to the best of my…
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) I designed this travel case for my shaver, but it might fit yours as well. in addition you will need 8x d6x3mm magnets and can glue to hold…
Remix is the head (8mm) and rod piece together as one piece. No glue required.
Fotis Mint created this Safety Joel model by referencing my "Safety Joel" logo. Can be seen here: https://youtu.be/_lRSweX6Taw Print instructions safetyfirst-final - really, you should use a resin printer for this one. add supports and…
This is a three-piece safety razor for use with double-edge blades. Post-processing requires breaking away the included supports on the blade guards and on the cap. Additional supports are not necessary. The STLs for this design are…
Blocks chamber and gives a visible indicator that the pistol is empty and safe. Pattern for easier grip on each side of the flag. Caliber is imprinted on the top part of the flag. Printed and test fitted with eSun PETG and eSun PLA+
English Version: Hello everyone, this is my second model, which was created on the basis of a template published here. It is a visible indication that the handgun is empty and therefore safe. A friend of mine needed some that would fit…
I know most of you folks won't even know what this is, but for those of you who frequent bear country, this will make total sense. An essential tool in the woods is bear spray - it is thought to be an effective deterrent to a bear attack.…
I spent a long time looking for an elegant solution for the steep curves that isn't permanent. I found the safety fence and adapted it to the scale and my clips. I have modified my clips so that they can be used in steep bends. The fence…
v2 Update Added anti-roll flange, which also doubles as a flat surface for those who want to print this sideways. The updated design accommodates #17 chiseling blades. ___ Yet another hobby knife safety cap. Unsatisfied with the available…
I lost my power switch key to my Tile/Wet Saw and decided to design one. I printed it at .2mm layer height with extra perimeters for strength. I stopped it at layer 3 for a color change and back to the main color on layer 5 so the text…
Simple flag to indicate cleared and open chamber. Safest way to travel with a firearm or when sitting a firearm down on a range. The 22 caliber model will work in most firearms, the larger caliber works in 9m and up.
This is another model to expand the collection of flagazines from DeWZ.
I print these in PETG. The tap rack training aid is printed standing up.
I wanted to create something nice for my new car and as a long standing fan of Moai heads, I thought this would be perfect. Fits 1-7/8"/47.5mm towball. Merged two models to create a theft-proof version and also did some updates for better…
Please note: For structural integrity, print the head cap on its side. Supports are not needed. If you have trouble with it not sticking to the bed, use a raft. This is a two-piece safety razor for use with double-edge blades.…
Simple, yet feature rich cover for the european schuko sockets. Features: use the plug itself to remove the cover fits to all common diameters of plug pins chamfered inserts to easily insert the connectors chamfered backside to easily put…
Simple blade guard that slips over your Henson AL13 safety razor so you can throw it in you dopp kit (toiletry bag) without worrying about inadvertently cutting things or damaging the blade. There are drain holes in the bottom to keep…
This is a complete set of safety zone parts with barrier, attachable to the Carrera tracks with these red connectors (check my other designs if you want to print some of these:…
Vertically stacking used DE razor blade container. Has middle peg to allow for high stacking of blades without falling/becoming disorganized. A proper way for used blade disposal, throw away entire container when full and print again.…
A hook and latch for restricting access to drawers. The hook are purposely designed to be thinner at the base to be more flexible and a “button” with indent is added for finger guidance. Installation instructions: Mind which side the lock…
Simple holder for safety glasses, modified from James Purcell's thing to fit Biltema pegboard. Biltema pegboard holes are 4mm wide and 12mm abart from each other and it is sold in Scandinavia, but there are other brands around the world…
Keep curious hands at bay with the Door Knob Guard! 🌀🔒 Say hello to your new babyproofing sidekick! Designed to outsmart tiny adventurers, this clever little device adds a layer of defense between your toddler and the room they definitely…
My daughter asked me if I could print her some whistle for her and her friends. This is a nice model from ThreeLIttleBirds 3D. I printed them on my Prusa XL, Core one, and old MK3 successfully Things I used: orange PETG (…
I got new safety glasses and needed to keep them somewhere safe. I use pegboard, so that was the perfect place. I looked at a bunch of the options available here (see below for a list) but none of them were quite what I wanted - most hold…
I make wooden badges from lasercut plywood. But how to attach safety pin to back? I designed simple holder. The safety pin is embedded during print. The OpenSCAD model is fully parametric, the STL files are for the sizes I used - 28 and…
Use this template to remove the material necessary to accommodate a manual safety. The XMacro has a thicker frame than the normal 365, so I remixed the template to widen it the necessary amount. Just print the model (I recommend 4 copies…
I work in a robotics lab, so I thought it would be fun to procrastinate by making a safety sign to proudly display how many days it's been since a robot attack. It also conveniently has holes for magnets on the back, in case you want to…
This is version 2 of my original shaving brush stand. The main difference is the incorporated razor holder/channel. The razor holder can accommodate most razors with handles up to 12mm in diameter, and most shaving brushes regardless of…
A simple stand for the Henson Shaving AL13 safety razor with a spot for a pack of blades and a sharps disposal box; which can be found here: https://www.printables.com/model/779604-safety-razor-blades-sharps-disposal-box I will probably…
This is version 1 of an RV extension cord safety cover. This simple design allows one to slip the connected cord in the box and then simply cover. The cord is 3~4" off the ground and the box has ‘weep’ holes in the bottom in case water…
Remix of a remix for a holder for safety glasses. This remix makes it adaptable for the Multiboard system. No supports required, printed in ABS, but should work with PLA or PETG.
This custom hook is designed for Fiat Ducato and similar models. It fits directly onto the seat belt nut, providing an extra hanging point – perfect for camper vans to keep items organized. For secure installation, a strong mounting…
This is a PMAG 10 7.62 AC - AICS Short Action Safety Mag Block for rifles that use AICS mags. This one was designed for a Ruger Precision 6.5 creedmoor. Note: Tolerances on AICS mags and rifle mag block area very greatly between…
![Safety Razor Stand (minimalistic) [Rasierhobel, Shaving Razor]](https://media.printables.com/media/prints/923228/images/7051281_8e969acd-6f3f-4320-a0c7-2f552db57495_effd11f2-9852-4061-916a-9de28dfe6c0b/00.jpg)
