As voor Sencys (praxis) afplakfolie + afroller 1,1mx33m
As voor de Sencys (Praxis) houder voor afplaktape + afdekfolie 1,1m x 33m
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant
- Downloads
- 10
- Likes
- 0
- Rating
- 0
293 models
As voor de Sencys (Praxis) houder voor afplaktape + afdekfolie 1,1m x 33m
Print approx. €2.93–€3.58 excl. taxPreliminary estimate for one variant
This is a canopy for the BetaFPV Air Tinywhoops, like the Air65 and Air75. The longer tail section allows a lower camera angle to be set. I also made a widening in the area of the right holder to additionally fix the antenna connector. I…
Remix from “ Air65 Canopy (low angle) ” by raNn . Une nouvelle canopy à imprimer en TPU pour le BetaFPV AIR65 : Incassable Permet des tilts beaucoup plus bas Attention : Ce n'est pas indispensable, mais une impression “dur” facilitera les…
UPDATE 3: IMPORTANT only use these new files with the cutout for the U.FL socket (see images). The old design by BetaFPV likes to knock the U.FL right off the board… Ask me how I know. If you're in a similar situation, I wrote up a quick…
The Pavo Pico, Pavo20 and Femto from BetaFPV use the same VTX hole spacing so they are compatible. Not compatible with the Pavo20 Pro that is larger. The mount is around 2.8gr (depending on your print settings). The stock version (plastic…
This is NOT the lighter "Air" frame (yet). This is the standard Pro edition, which can support up to 35mm props (but not HQprop as they are larger). Also keep in mind that the AIO mounting is 26mm and may not work with all whoop style…
Case for the BetaFPV Air65 TinyWhoop
Case for the BetaFPV Air75 Tiny Whoop. The case has a modular design so it can be used for different battery numbers. The Case consists of the Case itself and a Lid to close it. Also a storage insert for four batteries (Lava 1S 450mAh)…
Someone in the comments mentioned that original canopy is too thin for TPU so I added 0.5mm thickness for it
BetaFPV C03 camera mount The design combines the idea of brighfive's Bribrain LowRider version requested by the legendary TDog. Features: Available Angles: 10°-60° @ 1° interval apart Weight: Approx. 0.573g Mounting Pattern: 25.5x25.5mm…
A modular case to easily carry the BetaFPV Meteor75 Pro O4, batteries, and a few spare parts. Prevents squishing the drone when transporting it. Even if the battery holders can work with the standard case, I'd recommend choosing a cut…
Yeah that small drone is flimsy. I do understand, betafpv shaved every gram to keep that thing as light weight a possible. But I really didnt like the fact, that this small beast will tumble all over the floor the moment you up it on the…
A simple, small box for storing and safely transporting the Air65 drone and 10pcs LAVA 1S 300mah (260mah) batteries
Filament ABS Nylon Layer 0.2 Infill 15% Infill type Rectilinear Support + Support type Snug
This is a remix of the Pavo Pico frame for 3s batteries by al-bandit (@albandit) in order to serve as a replacement for the original frame with 2s batteries. This is designed to accept threaded inserts which should be similar to the…
Changelog: 2024.01.27 : Add file pavo_pico_duct_with_feet_flanged.stl: Height is +1mm to a total of 6mm Flange the base to +1.5mm all around for added strength and overall stiffness Lightweight replacement frame duct for the BetaFPV Pavo…
the camera mount from the five33 whoop These mounts are designed and used by Team BlueEyes in the Italian Whoop League 30 deg 35 deg 37 deg 40 deg print settings: infill: 100% use tree supports fillament: tpu .2 layer also on thingiverse:…
I was looking for a carrying case for my BetaFPV Meteor 75 Pro FPV Quadcopter that holdes my drone as well as accessories like batteries, charger, tools, props and a powerbank. Since this is very specific, I didn't find anything out there…
I designed a canopy to fit a Runcam and TBS nano VTX onto my Meteor75 Pro Frame. It closes with the help of 1-2 Zippies, velcro cable ties or glue or string or anything else. ==> NO ZIP-TIES ON PREVIEW PICTURE!!! The VTX antenna is…
Travel Case for the BetaFPV AIR75 that holds up to 12x Lava 550mah (smaller also works) as well as spare props and more!Travel Case for the BetaFPV AIR75 that holds up to 12x Lava 550mah (smaller also works) as well as spare props, the…
A pluggable battery holder that allows you to fly your BetaFPV Air 65 with bigger battery packs like 450mah / 550mah or any battery pack of 17mm of width. Optionally use a M2 screw to secure it to the frame. Sources available!
This is a simple, light weight stand or landing gear for the Pavo20 series with 3s cells. It helps to stabilize the copter for a controlled take off as it will not roll over the lipo pack one or the other side. The idea is not from me but…
Very similar to the original, maybe next iteration will be lighter. Printed in PETG. Category: R/C Vehicles
In tinywhoop racing, every last hundredth of a gram counts. But you can't have your camera break in a crash either. You need to find the right balance between durability and weight. That's what the Joker is for. Material: TPU95A. For me,…
Fits Pavo Pico O3 and 6 batteries. (Betafpv and Tattu 2S 450mAh) ! Added version (R4...) with smaller outside radius to enhance printability -Place Supports under the latch part of the Box, so supports needed elsewhere -Glue a small piece…
Print with TPU material Layer0.2 mm infill 15% Secure the pad with a tie on the frame
BetaFPV Pavo20 Case with LiPo and accessories slots. Dimensions So as said in the title It is made for a BetaFPV Pavo20 . The batteries I use are 3S 450mAh . If you would like other sizes, tell me ! The others solts in the top part are…
Seems to have fixed my jello issue and is more supportive in a crash avoiding the weak betafpv canopy. Shaved some weight off since it is TPU. Used 2 m1.7x14mm screws. One on each side to mount. I use the spacers to provide some rigidity…
Protection de batterie pour les BetaFPV Lava 550 3S LiHV utilisées sur lesPAVO20Pro entre autres. Système d'accroche de la prise d'équilibrage inclus !!! A imprimer en TPU, 3 parois, 0.20 layer, nid d'abeille 3d 10% max d'infill pour…
Simplified BetaFPV Pavo Pico mount for O4 Air Unit (Lite) without carbon cross
BetaFPV BT2.0 and GNB A30 Connectors
After I broke my lens during a crash with a steel beam I ordered the replacement lens (CADDX ANT) and I designed this so it will not happen again. It is a easy but snug and sturdy fit, no glue or anything needed. It adds less than 1 gram…
That's my variant of the original canopy. I've added holder for 2 antennas and a GPS. Printed in TPU, will see how it holds. GPS used: Foxeer M10Q-120 ← this is my go to for small quads. Amazing performance.…
Mount for DJI O4 Air Unit Pro for the Pavo20 Pro. VTX mount and camera canopy for The DJI O4 Pro specific for BetaFPV Pavo20. The canopy is designed for Heat set thread inserts (for use with the OEM screws), but it is also designed to…
Little mount to combine Pavo 30 drone and gopro. Printed from Flexfill 98
BetaFPV Pavo Femto Storage Box – Remix of SnapLock Storage Boxes This is a remix of the SnapLock Storage Boxes (parametric) by Hugo, designed specifically to store the BetaFPV Pavo Femto drone along with four 450mAh Lava batteries . It…
Nice little 3D print to add little and light landing feet to the BetaFPV Cetus pro tinywhoop drone! Made to press-fit between the 3 protruding edges and print with the pointed part up. Gives around 4.5mm extra ground clearance. Depending…
I broke my Air65 canopy and didn't want to wait for shipping of a new one. I've seen a similar model to this one on the internet for other cameras, and I couldn't find a light weight canopy for the betafpv CO3 camera that I could use, so…
Made this for my Meteors 65 Pro and 75 Pro that have a M03 VTX. Works well with mcstinky canopy and C03 camera. Weight is 0.1g when printed without supports, 3 perimeters/walls and 0% infill. I set extrusion width to 0.3mm on my 0.4mm…
Remix of the frame to get the FC from meteor75 fit under the prop guard with more clearance because of some pins on the board. For the 1s 450mah battery holder, this one fits https://www.thingiverse.com/thing:3448125 Print Settings…
Hello everyone! (ツ)╯ I designed this battery box for the FPV drones BETAFPV Meteor65 for 9x 1S LiPos. Use 'Batterybox_empty_2.stl' for empty and 'Batterybox_full.stl' for reloaded batteries. If you prefer no font, see…
This is my attempt to make a traveling box / case for the BetaFPV Meteor75 Pro. Lid_V2 comes with round handles to make opening easier. Printing instructions still apply. Works with V1 box Box_V2 updated to have keying for V2 lid.…
Print with PLA or PETG. Slide into existing single antenna mount.
I wanted a small box to store my Pavo Pico in, and since I didn't like the looks that are already out there I grabbed whitys parameterized rugged box, and then I designed a simple insert for it. I printed mine in PLA-CF (mostly because I…
Cowboy hat for a little guy. For BetaFPV Meteor75 Pro Analog. Might work with Meteor65, cannot confirm.
This is a canopy for the BetaFPV Air65 (C03 camera) tiny whoop FPV drone with a camera angle of just 15 degrees, perfect for indoor flight. It allows slower and more controlled flight. The canopy is also reasonably light weight and…
I made this cage to protect BETAFPV LAVA 550 mAh 3S Li-Po batteries mounted on Pavo20 Pro. I was going to create a part to hold the annoying 3s balance cable in place but searched here and found a cage made by @DieselSLC which has a…
I have adapted the case from user Hero. once. Now it fits eight 300mAh Lava batteries and on the lid you can find the outline of Sailor Moon ( the case is for my girlfriend ) - of course only the bottom part can be charged, as it is…
Compact Case suitable for the new BetaFPV Pavo Pico drone, designed for those who want to protect it without carrying a bulky case on the backpack. It was tested on DJI O3 vtx version, Walksnail version will be tested soon, but I believe…
This is a 1s Lipo cage and adapter for tiny whoops, its meant to be inserted in the 11mm battery holder to use bigger 550mah lava batteries, it also protects the batteries from being smashed if you crash. it weights roughly 3.4g. Print…
Uchwyt GPS BetaFPV Pavo Pico / Pavo20 / Femto BZ121
This lens was suggested to me by https://www.printables.com/@CarterNguyen_2425202 on the KayouFrames discord. Big thanks to them! I tried a number of lenses for the O4 “lite”, most of them have an extreme amount of fisheye or a lot of…
While I made this model completely from scratch, credit where credit is due. I got the inspiration from this particular model: https://www.printables.com/model/1231690-betafpv-pavo-femto-storage-femto The previous one was sized for 450mAh…
Light weight remake of the original for better flight time. Print Settings Printer: DMS create Rafts: No Supports: No Resolution: nozzle 0,4mm with layer height 0,2mm Infill: 10% Filament: - PLA Notes: Printed upside down for better…
An adapter to directly connect a Worx WA4054.2 LeafPro collection hose to a Ryobi Vac Attack mulching leaf vacuum. The vac attack needs to be modified by cutting off the curved part of the discharge chute as shown, roughly 2 inches from…
I didn't like how the motor screws were the lowest point of the drone, the metal screws can scratch surfaces it lands on, and conversely, rough surfaces can sand down the screw heads and make it harder to unscrew. These feet help prevent…
A 15° to 50° fixed-angle canopy for the C03 camera with raised design to prevent contact with the flight controller. Features integrated retention straps to secure the camera tightly in place, a protective horn on top, and a rear antenna…
BetaFPV Meteor 75/75pro have small bettery tray to use only BetaFPV 450/550 mah battery. If you want to use other bigger battery, you may have to cut tray, it can caught your frame bend. I design a battery adaper tray, It fit almost…
The BetaFPV Pavo Pico has a battery holder than can only hold a very specific size and like everyone, I don't have them. The usual way to deal with it is to snip off the holder legs and use a strap. The issue is that, in my case, the…
Plate to hold lenses inside the BetaFPV VR03 FPV goggles as the goggles are smaller than all tested glasses frames. (Needed size is ~110mm) Print two plates - with the bed side of the pieces facing inwards. Needed as the is a chamber on…
BOX for BETAFPV ExpressLRS Nano 2.4 GHz EP1 20x20mm for M2
“Made for the Tiny Whoop Pinch Camera, and Diamond Style Flight Controllers. You will have to cut 75% of the front post on the BetaFpv Air75 Frame and shave a little plastic off of the bottom of the frame under the front post.” Copied…
The Air 65 and 75 have a rather aggressive camera angle out of the box, even on the "lowest" setting, which can make them rather challenging to fly indoors, especially as a beginner. To fix this I modelled this tiny "adapter" piece, that…
A simple and small clip which can be glued to the inside of your FPV plane to hold 2.4Ghz aerials securely in place without having to tape them down. The antenna used in the photo is from a BetaFPV SuperD diversity transceiver– The clip…
If you like it - please click ‘Like’ and download to support my designs ;-). Using PnP version make sure there is silicone dumpers on both VTX board sides so the board DO NOT TOUCH canopy or screw. If you can use metal nuts (not nylon) if…
This model is adecue for Caddx Polar Vista
This is a remix from 2 different projects on here, but i made it with the intention of using the best from both worlds, its a air 65 or alike tiny whoop case.…
Must be printed with TPU
This is a lightweight 3D printed GPS mount designed specifically for the Foxeer M10Q-120 , an ultra-light GPS module, on the BetaFPV Pavo20 Pro frame. The mount provides a secure and clean installation while keeping the total weight…
I used to have a lot of jello in the camera, but not anymore! It took me six versions to find the perfect fit for the camera. I'm using the original screw from BetaFPV. Print in PLA. Enjoy the flight!
ExpressLRS Vertical Antenna Standoff Mount for Betafpv or AxisFlying antenna 4/5/23: Added a slightly shorter version Category: R/C Vehicles
корпус под walksnail 1s для pavo pico, камера сдвинута вниз и к центру, также фиксируется она крепче, нежели в стоковой рамке, всё под винты M2.
Hang all the gear in the Cetus Pro FPV Drone Kit on a wall for easy access and display.
If you need reading glasses you might have trouble seeing a sharp image on FPV goggles. With this clip you can attach lenses from inexpensive workshop magnifying glass like these (I couldn't find a place to buy just the lenses). Be sure…
A sleeve that will clip on to the 300mah Meteor65 battery sleeve, will allow you to use 450mah. I printed it on it's end with the clip opening facing upwards at 15mm's without supports. It's a tight fit to clip it on the 300mah sleeve,…
A simple cooler for a 65 mm tiny whoop. I needed to adjust a few functions, but specifically with the Air65 the temperatures reach more than 70°C after a few seconds. Especially when you set the power to 100 mW or more xD That's why I…
This is TPU adapter designed to mount the DJI O4 Lite camera into the BetaFPV tiny whoop canopy. It installs using the original canopy screws and requires no modification. The adapter features integrated hooks to securely hold the camera…
Mount to install a Insta 360 GO2 cam on top of BetaFPV's Cetus X FPV quad drone. To be print in TPU. Keep back in place using an elastic tie.
A 15° to 50° fixed-angle canopy for the C03 camera with raised design to prevent contact with the flight controller. Features integrated retention straps to secure the camera tightly in place and a protective horn on top. Lightweight…
I needed a way to mount my BetaFPV Naked GoPro 7 to my SpeedyBee Master 5 V2 Drone. Printed with TPU
Inspired by briBrain Tiny Whoop Mount, but this version is styled to fit the betafpv c03 camera and sheds around 0.15 grams, now 0.6 grams Update 12/29/2024: Added the “Tweech Edition" ,this is the original design with just weight savings…
mise a jour version v2 le 27/09 . pour une bonne prise en main voici une cage pour : Adaptateur SH1.0 4 broches vers USB Type-C imprimer en TPU 95a
Disclamer this is not my design I am archiving the limited edition betafpv design original link: https://support.betafpv.com/hc/en-us/articles/4409821458841
this is a 3d model to use for projects and such, it is an exact replica of the betafpv elrs antenna and you could use it
.STEP files are included but may be not so accurate
An antenna support for optimal reception and to prevent it from getting caught in the rear propellers. Insert one of the lobes into the opening on the frame near the antenna. Squeeze the second one together to clear the frame and it…
This is my take on a ultralightweight mount for the BetaFPV C03 camera (which is my camera of choice for lightweight whoops since the TW Pinch is rather difficult to get in EU at reasonable cost due to shipping). Weight: ~0.37g Camera…
lighter, flywhoo ND filters capable, less vertical space (antenna tilted back) print in TPU 95a, Supports are needed! 2 walls 7% infill worked for me. this is a remix of:
Leichter Schutz für die Starlight, es ist für den TPU Druck gedacht, und gezeichnet
This is a frame replacement for the BetaFPV Air65, which is smaller and has NO propguards. NEEDS longer 1.5mm screws to hold the AIO in place, old motorscrews can be reused. Used a BeQuiet Cable Strap from a PSU, which has the width of…
Just a very simple box that utilizes the packaging foam from the box the drone came in. You will need 6x M3x20mm Screws. I recommend printing the box, lid and latch with “Fuzzy Skin” applied only to contours, I use 0.3mm point distance…
Pavo20 PRO box, batteries, spare propellers and some tools. The locks are solved using 6x3x3mm magnets. The lids on the
I couldn't find a case to fit my Air75 and a v whoopster together. You can also add batteries in rest of the compartment Print suggestions: 15-20% infill Print with flat size at bottom Features: Requires no support. Snap-on fit
A rugged box for betafpv air65. Main box fits: drone spare frame 17 batteries original charger usb cable for the charger usb data cable (in a small compartment) bottom lid fits: props screwdriver spare canopy whatever you can fit inside…
Print in TPU Use 40% infill. Does not require supports or rafts.
Need to scale in slicer up to 1000 Frame for meteor 65 printing SBS, nozzle 0.2, it took me 8 hours with a Layer height of 0.1 ,layer width 0.22, print speed 20 mm/s. The protection is specially wider so that the screws do not bend upon…
Hello FPV Buddys, This is a Box for Tiny Whoops, Battery's, extra storage (Props/Charger). Optimized for BetaFPV Air 75 with 5 x 1S 300mah BetaFPV Lava Batterys (Full/Empty slot) and BetaFPV mini charger I will also upload the Fusion 360…
Frame for utilize with spare motors 1103 -11.000kv of Betafpv Cetus X
Parts are easy and fast to print I used PLA and PLA+ for filament Lid for the case is snap on (you can use some CA-glue to hold it firmly). Battery has its own compartment in the bottom of the case, but I used some strips of duct tape to…
What? A transport box for 1s 450mAh Betafpv lipos It's really tight, so you need a good calibrated printer, otherwise print it with 101% size. Why? I was annoyed that the batteries were flying around in the bag all the time. How? I…