Counting matching models…
Overview This is a complete 3D printed replacement for the Kingsong S18 side panels. The aim is to create a more ergonomic and slim design that enables the use of any pad setup while adding more protection and making it much easier to…
A downside of the Inmotion V11 is that there's very little stable surface to mount power pads on. These fairings are meant to solve that problem. Mounted with M5 x 12mm screws, can also use up to 16mm length. Recommended to use double…
This device is design for the DM26xx and DM28xx Dometic refrigerator models. I have included the design file so you can modify it to work with your brand/model of refrigerator. Simply install the device to hold the door slightly open.…
Repair Lock Pin for Honda Transalp Fairing - kit perni per riparazione carene Transalp Overall dimension: Ø20x62mm Ø17x33mm Filaments: ABS - ASA - PLA+ - PETG Resize to adjust dimension If you download/enjoyed this file, please leave a…
Fairing Threaded Standoffs / Spacer - Transalp 650 M10 Thread Mod. 14-42mm - Boccola Perno Carena Transalp 650 Mod. 14-42mm Filetto M10 M10x14mm M10x42mm Suitable for:…
Fairing for KS S22. Model is for LEFT side, mirror for right side. Print fits on Prusa I3 MK3s when placed diagonally on the bed. Printed with 3 Perimeters, 20% infill, PLA+
These are parts I made myself in order to screw on the full fairings on the sv650s. The fairing hold really well eventhough I did not use the Frame Sliders. The Holder on the radiators have to be printed twice. You can choose between the…
This model is compatible with the lego system.
model of the missing elementlego spoiler technic panel fairing smooth #5 long
This model is compatible with the lego system.
A simple clip for socks to keep them paired for laundering and drying. Best working slow printed from ASA without cooling . Do not use PLA, because it will deform in the washing machine because of obvious reasons. I lay my used socks…
This is a DIY wind fairing (AirScreen) designed for a vehicle roof rack. The design is compatible with the Thule WingBar Evo roof rack. Attached also the screen sheet in DWG format.The screen is compatible with the Volvo S60 vehicle. Enjoy!
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
PETG or ABS only. Please do not use PLA
This model is compatible with the lego system.
These are various versions of reverse-engineered fairing inserts for the BMW F 650 CS Scarver motorcycle. There are four variants of the logo area: 1) badge: Houses the original 58 mm BMW emblem (51 14 8 164 924) 2) 56mm: Houses a 56 mm…
This should work for bikes with the 8.5" or 216mm spacing between windshield mounting brackets and 40mm hole spacing for the M6 bolts. Remove the old brackets completely. Print solid with all perimeters. Suggested settings for 0.4mm…
This polycarbonate fairing can be used on the BlueROV2 to protect the Subsea Buoyancy Foam . *Please note: 3D print does not include the following: 4 x #4 – 3/4 screws
w124 fairing clip - verkleidungs clip
This is a teradek pairing tool. I reccomend you print the two pieces vertically as to not allow gravity to squish the threads. Once it's off the printer, unbend a metal paperclip, heat it up (a lighter works best) and stick it in the hole…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Hello everyone, I am proud to present to you this remix. The plate was to big to fit where I needed it so make it smaller. Work well, good idea ! I really enjoyed design it and I hope you will like as much as I do. Do not hesitate to like…
Version 1.2 (Sept 2024) 3D printed Raven Armour, a strong, modular fairing system for the Begode T4 EUC. Featuring interlocking pieces extending surface area of each side of the unit for placement of power pads and accessories. Updates 24…
Original design by Harris Taylor for my Kitfox STI, I am unsure if it will fit other kit foxes but I have been asked for the files so here they are. I printed them on their side, I would probably recommend manually adding supports to the…
Lock Pins for Motorcycle Fairings repair - Collection - Assortimento Perni vari per riparazione carene Filament: ABS/PETG/ASA Suitable for: https://www.printables.com/model/768587-fairing-threaded-standoffs-spacer-transalp-650-m10…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Fits standard 25mm round NFC tag stickers. The logo indent in the top, and the gap in the middle are both 0.2mm, so I would recommend that layer height for easy slicing. A set for wifi, a set for bluetooth, and some blank ones: Pause your…
This model is compatible with the lego system.
This model is compatible with the lego system.
Sock pairing clip with clothesline hanger Simplify your life by using this Sock Pairing Clip to pair your socks before washing them. Just follow the following steps Print some clips Pair your socks before putting them in the laundry…
This 3D printed King Song S22 fairings are intended to provide a large, flat surface to attach power pads. I had some design goals for this Robustness It won't bend or break when hard braking. It should take falls without issue even when…
This is a clay extruder suited to print with very fine nozzles. Cartridge sourced from: https://www.aliexpress.com/item/1005003632721391.html?spm=a2g0o.order_list.order_list_main.46.5c911802oTDOKo Stepper motor from:…
Temporary replacement fairing for the Adventure Spec mini fairing. If you damaged your original this will work until you can get a replacement. Probably wouldn't last long term. Replacement…
Floppy Fairing Fixxer for 2022-up Honda Grom MSX125. Braces the fairing after eliminating the stock airbox using the mounting bolts and U-nuts of the old airbox. The left side brace is easy to print, right side brace is a little awkward…
2022 KTM Duke 890 R Tank Fairing Bolt washer Direct replacement with an M6 x 1.0 x 12 mm bolt 100% infill OR 100% perimeters recommended. Use high temp stuff like PETG or ASA or ABS Layer Height: resolution 0.10 mm (or 0.15 mm)
A slight remix of a great design. The original perfectly fits the nylon gear version of the Tower Hobbies (and clones) 9g servo. However, the MG90S, metal gear, version is slightly taller and required a modification. This design allows…
Slide over camper/rv refrigerator push tab then close door so keeps gap in door for airing out. Made a bit thicker and removed one opening so stronger and not as easy to break. How I Printed Flatt with supports Ran @ 80% Used PETG Head…
it was a request for my mother in law, a peace of plastic for earrings to maintain it in the box. the gcode is for 10 pieces. The hole for the earrings is 2mm, should be enough for any type. comment if you need modification
Mounts for the Zumo XT (and maybe others?) and Oxford's heated grips for the AdventureSpec Mini Fairing. There's a pocket where an Airtag can be snapped into on the rear of the GPS mount. Mounts to the fairing face using existing holes in…
This polycarbonate add-on fairing is used on the BlueROV2 Heavy configuration to protect the added Subsea Buoyancy Foam and maintain a sleek, hydrodynamic design. Please note that this product doesn’t do much when used alone – it’s meant…
This model is compatible with the lego system.
Disclaimer: This model is part of a larger collection of ZX-4R 3D scans that I have on my profile. All models were scanned with my Metro x laser scanner at 0.2-0.3mm resolution. If you have managed to break any of the parts, you can use…
Description: Backgammon pieces for gameplay Pairing die for betting Printing Instructions Print 2 sets of 15 pieces (they should be different colors [or you can mark half of them]) Print 1 pairing die (Board & other 2 dice not included :))
Fits the Pampered Chef paring knife (Item Number: 100034) Print on long edge w/ brim for best results.
A motor mount and custom low-profile fairing for the Atom RC Killer Whale motor pods. The motor mount improves the cooling of the ESC area, and the fairing should be compatible with the original motor mounts (not tested!) The fairing…
Honda Side Cover Collar - Africa Twin RD03_RD04 and many other models - Collarino Carene Laterali Honda Part Number 84702KV0670 - 84702-KV0-670 The Collar is used on 9 models from 1990 to 2014: Honda VF750C Honda VT1100C2 HondaVT750C2…
This model is compatible with the lego system.
This isn't quite a remix, but this is a kickstand specifically for use with this fairing replacement kit. It utilizes the geometry of the fairings and the included m4 attachment points. I used 2x 8mm m4 threaded inserts in the rod, 2x…
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
These are pretty standard in motorcycles to mount plastic fairings. 8.5mm inner diameter makes it just a touch tighter than original providing a snug but not too tight fit. Printed in Bamboo TPU HF on P1S printer 50% gyro infill but I…
Something to dress up the plates that hold the vertical profiles to the base. Requires one M8x16 bolt and T-Nut to attach.
You may want to sand the bottom to make it rougher Use the supplied rubber tape on the camera bump to the top This has a back stop so the camera doesn't slide to the ear and a tiny bottom mount to take up space left around the mount Use a…
Model of the B-DNA dodecamer from 1bna.pdb as cartoon. The H bonds between base pairs are highlighted. Great for discussing the structure of nucleotides and DNA. I made this to use it for teaching Biochemistry and Structural Biology.…
A fairing clip designed specifically for the front plastic fairings underneath the headlights on a 2016 Kawasaki VerSys 650. May fit many models and locations also. Printed model may survive as PLA, but I printed in ASA for a longer life…
KLR 650 Front fairing spacer washer for when you loose them or if you buy one that doesn't have them
This one will require a M3x40 CHC screw and nut, to install it in place of a broken clip or a strap adjuster without clip : no need to unsew the strap, just install it because it's in separated parts. The other side is the adjustable…
Un carenado compatible con el modelo imprimible del Falcon 9 diseñado por la casa FAB365. Es un diseño propio y sencillo que encaja a la perfección, no tiene apertura y quizá no respete las medidas y formas de forma certera, pero se…
22+ Honda Grom/MSX125 Fairing bracket for aftermarket intake/airbox delete WARNING! If you must cut your carbon fiber tube, do so in a safe environment. Carbon fiber dust is dangerous. I use a large tub full of a water, and a bandsaw,…
Honda Transalp 650 Fairing repair tab Right_Left headlight fairing attachment - Linguetta riparazione carena DX_SX aggancio carena faro Create a recess with a Dremmel and glue with epoxy resin Creare un ribassamento con un Dremmel ed…
To fit the side fairing to the Honda VTR SP1 and SP2, you need a spacer that separates the frame from the fairing. This is the perfect replacement in case the original part gets lost. I've had it on my bike for three years now and haven't…
Custom fitted closures for the wing strut fairings on the RANS S-21 Outbound experimental airplane kit. These allow The wing strut fairings to be installed/removed without having to disconnect the struts. Two additional rivnuts are…
The Saturn V Rocket engine fairing and fin system on the Saturn V is part of the S-IC first stage , and it’s one of the most visually distinctive features near the base. Even though it looks simple from the outside, it serves several…
Holders for sidecutters, screwdrivers, glue and flux tubes and other things
Fairing Pin Reinforcement Collar Honda Transalp 650 - Collarino di rinforzo colonnina perno Carena Misura 42mm Transalp 650 Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx
Added 10mm brim and support in the strap slit. I did not add anything in holes to save material but it would benefit of support to get a better look. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Filament:…
Replaces a broken fairing peg in ABS fairing parts. PLA is ok, no support or raft, epoxy into place.
These were used on the bodywork of various '90s era Ducatis. I know the 907 and Super Sport used them, probably other models too. Last I checked they were still available from Ducati but I needed a few for a trackbike and didn't care if…
Wanted an embossed version of gexgecko's NFC pairing buttons so I could add a nice colour change.
A at least 100mm long threaded m4 rod, 3x m4 nuts, suction cup and super glue are needed for assembly. Simple to assemble and print, yet very useful.
This is a fairing for the Busch&Müller Cycle Star bicycle mirror. It is tilted 5° and can just be clipped on the mirror - no need for glue or tape. The provided .stl contains the model for the left side mirror.
It keeps the display open as long as you are working in the phone, or repairs it. It is lightweight and can be printed very quickly in a 3D printer. You definitely need supports. With 15% infill, the model is stable.
A fairing for protecting the ping360 on Blue Robotics BlueROV2 Heavy
Honda Grom fairing rod that I printed for my SF. Printed it standing upright. Used a M5x0.8 nut on the outsides and nut and bolt to attach the 2 fairing rods together to make a single rod. Used super glue to hold the nuts and bolts in the…
To save weight for a Ninja 400 race bike, it is common to replace the heavy stock fairing stay with an aftermarket one, such as the Motoholders race fairing stay . If you do this, you need to reuse cumbersome stock bodywork to mount the…
Hello! Have you ever broken the plastic part of a similar key that you use to unlock your front door at home? If so, you know how much it costs to have a duplicate made. No worries, because with this model, in about 10 minutes, you can…
Good morning, Welcome to my profile, full of models and miniatures :-) I have for you Repairing a flat tire / inner tube on a bicycle. The tools are mainly useful for removing the tire to get to the inner tube. It works really well. It…
My Acerbis Koerta motorcycle body armor was missing a few pins. I used NUT JOB | Nut, Bolt, Washer and Threaded Rod Factory and a caliper and designed a replacement. Printed in PETG, then I used some heat to melt the top of the bolt to…
MOST IMPORTANT!!! IF YOUR X56 IS UNDER WARRANTY, USE IT FIRST!!! This guide is for when that is not an option. - This is my 2nd Logitech X56 HOTAS, and probably my last. It worked fine UNTIL I found the throttle grips starting to wobble…
my wife run out of sock clips, so i took it upon myself and my Neptune 4pro to make her more. I could have saved plenty of time looking online for a model, but yet here we are…
Repairing Broken Parts of a Chair ----------------------------------------- 0.40 mm - nozzle 0.10 mm 0.12 mm - layer height PLA
Do you have an old Thule fairing that was meant for rectangular bars, but have a VW with their more aerodynamic carrier bars that you would like to use the fairing on? Well that's what I made this adapter for. This was designed for my Mk1…
Remix of https://www.thingiverse.com/thing:4844369 This one is hollowed out so that it flexes slighly. I found that the other versions are a bit too stiff for the field that I fly on. Print in PETG 0.2 layers N.B. Mirror the files in your…
After paying almost $50 for a new switch that was similar to the old model no longer in stock I have at home, it was about time to design the only part that really needed replacement. Print instructions Unassociated tags: electric switch…
A fairing that incorporates servo extention point for upper wing panels, sized for standard JR or futaba style extensions. I printed in PETG on an MK4, standard .4 nozzle and .15 quality settings (not input shaping) with 3 perimeters with…
This was something I put together for the 2023 Valentines Day competition, and I'm glad to mention it worked first time! This was inspired by the single cover for Benny Benassi's Satisfaction , and eventually evolved into the three-piece…
Towel Rail Bracket 30 x 15 Oval Bracket Airing Cupboard Rail Holder I designed these holders to replace an old tired over the door towel rail for in my airing cupboard. I used PLA+ printed with 0.2 layer height, 4 perimeters with 20%…
Add some little strips of VHB to the narrow bit on the rear where it contacts the recess in the battery casing to secure the plate. Then when applying Velcro to the wheel ensure you use one large sheet which will contact both the plate…
Split this fairing up so it would print on a 6x6x6 print bed. Category: Other
A spare hot shoe mount for the Nikon SB-28 camera flash repairing. 3D printing settings for nylon: 0.25 (0,2) mm nozzle 0.08 (0,1) mm layer height walls ≥6 6 layer top/bottom filling ≥ 40% support - yes brim 5mm speed ~30-40 mm/s fan -off…
Drill the switch with a 6.5 diameter drill Glue the part with cyanocrilate
I designed a wind fairing specifically for the side T-track profile for the Lone Peak V1 Truck Camper. Designed to cover about a 150mm X 150mm packed profile of a side mount 270 awning (specifically the OVS HD 270 LTE Awning). Best…
Print Instructions Supports required for top and bottom model overhangs. Top includes 0.2mm layer for better supports. Poke through top holes after printing with hex driver or other tool Print footer and cover with flexible filament (TPU)…
