14,676 models
I really like gears - you can see it on my models, there are many on this topic. I was inspired by similar holders, but I added new things to this one - it can be printed print-in-place, I added a locking wheel so that the gears do not…
First layer 60x60 mm square with 0.2 mm height 100x100 mm square https://www.prusaprinters.org/prints/10876-first-layer-test-100x100-mm-square Print instructions First gcode: PLA Second gcode: PETG
First layer 100x100 mm square with 0.2 mm height 60x60 mm square https://www.prusaprinters.org/prints/9838-first-layer-test-60x60-mm-square
Use-case This geared self-clamping and self-releasing hook is ideal to hold towels that have no hanger (or have an owner that is too lazy to use hangers). To hang up the towel, simply touch the lower lever slightly from the bottom and it…
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
You can use these squares to easily level your bed. Print them out and then adjust each corner individually. If the surface is rough, lower that corner and if it's not sticking at all or you see gaps between the lines, then raise that…
Made to accomodate DJI Mini 3 Pro parts. (This was designed for the Mini 3 Pro but may also fit the Mini 3 parts) Just a simple container to hold two full sets of replacement rotor blades/propellers/air screws, screws, some tools… Thats…
Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)
Have fun with two geared fidget rings! I uploaded many sizes (inner diameter in mm from 12mm for kids to 24mm for big fingers, please use the conversion table below in case you are used to your local ring sizes and use the closest value…
I made these three "Custom First Layer Calibration Squares" to help you dial in your perfect first layer. When printed properly they will come out as a solid single sheet of plastic. Its a fast easy print! .20mm Layer Height Single Layer…
I saw a box for CCG cards with a gearing system to raise the cards up. I thought it was quite nifty but at the same time, overly complex, requiring multiple metal pins. This is my own take on the concept. Huge update - 05/12/17: I have…
Multifuncional case This case design is inspired by Prusa style and motto: Everyone is a maker, only I am a printer PRUSA It fit self-rolled cigarettes, to fit regular size cigarettes you can just scale it to 114% in every direction. The…
This fidget toy is fully Print in place and does not need any assembly. Perfect to test your printer or just as a fidget on your desk. If you turn the second square really fast you can even see a gyroscopic effect. The “Low tolerance”…
WaveShare 7.5" e-Paper case - symmetrical and without holes on the outside. Note: There is a new variant available now too. Check it out here: https://www.printables.com/model/1400457-school-timetable-with-epaper-display Features: For my…
45mm and 65mm 0.2mm thick square for calibrating your first layer, the presliced files are set to pause at 160c extruder temp to auto bed level. Updated for 0.4mm and 0.6mm Nozzle version Gcode files and 65mm size
Simple pendant earrings, two pairs. STL, and G-code for Original Prusa MK3S / MK3S +, PLA, 0.4 mm available for download. Jednoduché visací náušnice, dva páry. Ke stažení je k dispozici STL, a G-code pro Original Prusa MK3S/MK3S+, PLA,…
3D map of the Prague Castle area. Available on three scales: 1:5000 1:2500 1:1000 How to print your local area? Read the article: https://www.prusaprinters.org/how-to-print-maps-terrains-and-landscapes-on-a-3d-printer/
Enlarged and modified version of @BobMcGlobus_870140 click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.) The original…
Possible to print in 2 colors with MMU to print logo Diameter : 40 cm
I was inspired by Mr.Baham to make a USB mount that didn't require any hardware. This mount will snap fit into the 3030 extrusion. It works best if you stick one side in and lever it into place (it's a tight fit). You will need a USB male…
WaveShare 4.2“ e-Paper case - symmetrical and without holes. It can hold up to a big 10000mAh LiPo battery and has a mounting point for a ESP32 - Lolin D32 For my projects I wanted to have a symmetrical case to mount my often used…
Complete Yagi Antenna Clamps Collection — Universal, Dedicated & 6m Heavy-Duty (Boom 15 to 30 mm) A popular, highly versatile antenna clamp collection designed to fit multiple Yagi antenna configurations. Thank you to the ham radio…
Hello there! I recently moved to another country, I'm used to roll cigarettes with this thing, but I couldn't find it here. So by the photos and memory, i created this version, similar to original, fully printable :) I prepared gcode…
Available in two versions: 15cm / 6in 10cm / 4in Now you can make perfectly parallel lines on your paper, woodwork, etc. In addition to the horizontal distance (15cm/6in or 10cm/4in), I added markers for vertical distance between lines (…
The scarecrow is powered by the wind and scares away birds and moles in the garden or just birds from the balcony. This scarecrow produces a slight vibrations that are transmitted in the ground and these vibrations scare the moles away.…
The 25 mm wide and 5 mm thick square allows you to always draw the same width of margin for calendar board as a binding medium. Saves time and precision. Part of a set of 4 scrapbooking tools.…
You can use these squares to easily level your bed. Print them out and then adjust each corner individually. If the surface is rough, lower that corner and if it's not sticking at all or you see gaps between the lines, then raise that…
Printed on Mk2.5 S, no supports needed, standard PLA profile.
Student 3D designer chasing a dream. I don't own a printer yet, but every like and download truly helps. Thank you! All❤
You know it, you need to accurately measure the right angle and you have nothing. No problem, ten minutes in the modeling program, an hour and a quarter of printing, and the problem is over. Dimensions: 100x50x20 mm. If you want to edit…
Holds the square Xiaomi temperature and humidity sensor. (I think this is the Aqara version?) It mounts with a common drywall screw, or with a zip-tie. (There's a flat bit at the top of the screw hole to make zip-tie mounting a little…
This box supports following components: Raspberry Pi 4B Waveshare 4.3" DSI display ( https://www.waveshare.com/wiki/4.3inch_DSI_LCD ) Noctua 40mm 5V fan - NF-A4x10 5V PWM 1-channel relay (unfortunately not exactly a typical one:…
I made these boxes for my own drawers based on my kitchen utensils, specially the knifes that I modeled to fit my specific set of knifes (Brand: Tramontina). As a starting point I generated the gridfinity boxes using an onshape template…
Chase Stadium in San Francisco Print instructions Columns were added to enable overhangs.
Length ajustable right angle tool - slide the ruler in and out + straight line tool - place pencil in the hole and go!
A chicken feeder. Designed to make your hens feel like they're (already) in heaven, or at least in broth. Meticulously designed based on Leonardo DaVinci's lost sketches, tested and approved by former NASA engineers. Give your chickens…
This is a tool to provide a physical example of packing 17 1x1 unit squares into a 4.7x4.7 unit square. It was inspired by this twitter exchange, which I came across on imgur: The image used in that exchange was created by Erich Friedman…
Dieser hochwertige Aufhängehaken ist die ideale Lösung, um Christbaumkugeln, Dekoanhänger oder kleine Bastelprojekte stilvoll und sicher zu befestigen. Das Design ist stabil, formschön und speziell für eine zuverlässige Aufhängung…
Need a way to pay at the Our Generation Cafe? Use this terminal from Square! This Square credit card terminal is for American Girl / Our Generation dolls because it's at 1:3 scale but you can modify the scale. This terminal has a hole to…
Print MK3.5 0.2mm Strukural Prusament PLA Supportn:None Infill_0% Seam position: Random First layer: 225/60°C Other layers: 220/60°C
This “Geodreieck” is a common tool used in school K-12 and they are getting so expensive so that I just started 3D printing them. The result is a dual-color triangle with important markings being highlighted. HOW TO PRINT Download the…
3D sign warning trespassers of the dangerous attack frog. Best we can do is warn them, what they choose can't be on us. Our conscience is clear once this sign is posted. Both PLA and PETG prints are added below. The picture is PETG for…
Holds a WaveShare 2.7" NFC card that is used as a Data Range Card. Data is transferred from Strelok Pro Ballistic Calculator to the WaveShare card via NFC. Displays the distance, elevation and windage. Hardware Required: (4) 3mm x 6mm…
Praktischer und einfach zu druckender Eierbecher im stapelbaren Design. Sollte mit einem recht Temperaturbeständigen Material gedrunkt werden. Ich empfehle PETG oder ABS. Ich empfehle ca. 20% Infill und eine 0.2 Schichthöhe. Supports sind…
90 degree square for all sorts of things. I use it for woodworking to make sure my projects are square while framing and glueing them up.
This is a modular ratchet socket holder. It consists of a base, 9 springs that hold the ratchet sockets and a locking pin. If a spring breaks you can replace it individually without having to print another holder. The ratchet sockets…
I made this box for my wife's quilting squares of various sizes. She was concerned she might misplace the smallest ones and wanted them all together. So, I took some measurements and modeled this box to hold them. To save on filament, the…
I love to play with shapes to see what kind of patterns I can make. Then I just have to dial it back to something that is printable.
Corrected text: "It is a bullroarer that I modeled from a wooden bullroarer. The different sizes I tried worked well, and the sound changes depending on the scale. To use: Tie a string of any length you prefer (recommended length is 70cm…
This is Dr. Finkelstein ! You can gift it or just make it for personal use. Some other possibilities include mounting it in a frame, or tacking it on the wall. The possibilities are up to you! The included gcode is sliced for the Prusa…
Sign: BEWARE! RAPTOR CHICKENS - 20 cm, three colours
Add a color change at the appropriate spot, there is one already added in the gcode I included.
Description This arena design is based on a soccer arena in Munich (Germany). This model has three parts: 1. Roof; 2. Arena (without roof); 3. Base plate. 1.+2. are separated prints to reduce the required supports and to easily install…
This is overlay for mage wars arena player board to keep wooden cubes in place in the heat of the game. I used just some leftover PETG, 0,2mm Quality as print setting - print top resting on print plate to avoid any needs for supports.…
This pair of models is a replacement Beyblade arena foot and mounting plate. Stock height is maintained The design should also allow repair of an arena whose mounting squares have split or broken, as it uses the outer two holes and…
More photos to come once I have printed and assembled the model.
Einstellung Empfehlung Material PLA/PETG/ABS (Antirutschunterlage in TPU ) Schichthöhe 0,2-0,3mm Infill 30–50% Stützstrukturen Erforderlich Düsendurchmesser 0,4-0,6mm Druckzeit ca. 3–6 Stunden Hilfreich Keine Supports in den Löchern für…
The 3D model of the "Beware of Killer Cats Sign" is a creative remix of the “BEWARE OF CELL PHONE ZOMBIES, SIGN” by Becker Thorne. The bottom section showcases silhouettes of my two cats, labelled "Shadow" and "Ember," with their names…
Two included models: MMU model, with individual elements to assign colours Recommend to print face down to get a consistent surface finish on the front of the sign A variable height model, so the slicer can be configured to swap filaments…
My girlfriend always complains that cigarette packs are everywhere, which is why I designed a holder with Fusion 360. Elegoo Neptune 4 Plus 0.2 mm infill: 15-25% support: No Elegoo Pla pro 150mm/s
Monitoring of PC parameters was made according to the project of Alex Gyver using a screen lsd 2004 and arduino nano v3 with usb-c port. All parts are printed without supports. I printed with a 0.6 mm nozzle, but I will add an z-code…
A puzzle illustration the Missing Square illusion, sometimes incorrectly called Curry's Paradox. Print with or without the tray. Arranged one way the pieces makes a complete 5x13 triangle. Arranged another way the same pieces makes an…
BOM 4x M2 threaded inserts 4x M2 screws 2x Mount points (I used wall plugs) 1x Waveshare 7.5inch E-Paper Hat Display Module Modify model if necessary The mounting holes are 117mm apart. If you want to change that, edit the Fusion 360 file…
I got tired of having off-center and crooked predrill holes for installing the MultiBoard Core grids in my UnderWare (https://www.printables.com/model/941161-underware-the-ultimate-cable-management-solution) system, so I made this small…
Print the model with mostly standard settings and good quality filament. I used the following: Prusa Mk4 (IS) Prusament Galaxy black Default filament settings Default printer profile Prusa Mk4 IS 0.4mm Print settings 0.15mm STRUCTURAL 1…
End Caps for Open V-Slot 2020 with Open Hardware logo. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.16 Infill: 20% Filament: Prusament PC Grey Notes: Any material will do the trick Category:…
Circuit Design of crow with red LED eyes Power Supply (9V Battery) : Connect the positive terminal of the 9V battery to the positive rail of your breadboard. Connect the negative terminal of the battery to the ground rail . LDR and Base…
As part of my artistic process (drawing, woodworking, etc.) I design, create, and 3D-print my own custom art stencils. Based on the stencils I use in my social media videos , this stencil is part of a new line called my "Creative Stencils…
I was looking for a holder for my precision square and found one, but not for the skadisshelf. I adapted the existing model and thank you to the creator Ben.
A 3d Representation of the KDFW Terminal Area for use as a Teaching Aid for Flight Instructors! Scaled laterally to match the scale found in the FAA Private Pilot Testing Supplement (IMPORTANT: NOT SCALED TO MATCH A STANDARD SECTIONAL…
This is a bracket for mounting E27 lamp holders (40mm diameter) behind televisions or monitors with VESA 200 mounts (max. M6 screws). The angle can be adjusted in 30° steps. To do this, simply insert some 1.75 mm filament into the two…
As part of my artistic process (drawing, woodworking, etc.) I design, create, and 3D-print my own art stencils. Based on the stencils I use in my social media videos , this stencil is part of a new line called my "Creative Stencils…
Make sure you push in the two triangles close to the short end of the command strip first and tilt down towards the long end to snap into place. Compatable with all the channel models that David D has created. If you have any issues…
Templates currently available: 15ft lines straight offset diagonal 15ft cones orthogonal diagonal 30ft lines straight over three down one over three over two down one over two down one over one diagonal 30ft cones orthogonal diagonal More…
Farebný 3D obláčik je ideálny doplnok pre detskú izbu alebo hračkáreň. Jeho veselý dizajn a živé farby vytvárajú príjemnú atmosféru a potešia každého malého obyvateľa izby. Jeho inštalácia je veľmi jednoduchá a rýchla, takže si ho môžete…
Another design for my wife for sewing . 4 1/2" template. Real sturdy with the g-code here.
Die 440/480Watt Solarkoffer von Plug-In Festival, Wattstunde, Enjoy Solar oder Offgridtec können nur in einem festgelegten Winkel aufgestellt werden und der ist extrem flach. Meine einfache Lösung verwendet mehrere Schlüsselbänder mit…
Dare Mighty Things is a “motto” at NASA. While on a tour at the Jet Propulsion Laboratory, I saw “Dare Mighty Things” in simple raised metal letters on a gray wall. Since then, I have wanted a version for my house. I finally got a printer…
Quick print for an adjustment knob for Manitou Skareb Elite MTB Shocks (circa 2003). Mine broke after many years of service. If anyone else still uses these and also needs to replace the knob, this print may be of use. PETG is fine for my…
Make your own parking!! I made it with the lasercutter but you can also made it by a 3Dprinter servo boxes not included! materials that you can connect: Utrasonic sensor, RFID-sensor, LCD-display The code is very easy, ask this to AI and…
This is a sample print using the Terrain2STL site here: http://jthatch.com/Terrain2STL/ Site parameters were NW corner at (38.8898 N, -77.0752 E), box width 0.05 degrees, box height 0.03 degrees, vertical scaling 4. Other parameters as…
Das Model testet den Einsatz von Input Shaping Damit ich eine schwarze Magnet-Werkzeugleiste in der Küche verwenden kann, habe ich eine foliendünne weisse Hülle gedruckt, mit der ich die Leiste verkleidet habe. Sie dient jetzt als Messer-…
Mr.Fox loves tinkering with robots and teaching children how to build and program them. To prevent the robots from speeding over the edge of the table and crashing to the floor, he designed a modular system of connectors and boards to…
Underware is the universal, open-source, modular, extensible and re-usable solution for managing cables, mini-pcs, usb devices…pretty much anything, anywhere! Watch this video to find out more: Key Points Open-source design - The whole…
FYI if you scale the model down it will not fit together Collection of Interlocking fidget toys, Square, Cone, Hourglass, Ball I like to print PT1 in matte and PT2 in silk, it really makes it looks great!
Check out some of my other fidget keychains! Captain America Gyro Fidget Triangle Gyro Fidget I wanted to recreate a model that I came across by offering a few size options along with some aesthetic changes. Here are four different sizes…
Thank you all for the many overwhelming responses! Because I have noticed that many have additional wishes and would like to put their own spin on the design, I have decided to change the license and allow remixes. To help you get…
The sign is mirrored, so the exposed part will be the one laying on the print bed. This ensures better finish of the sign. This whimsical and humorous 2D design features three curious cats 🐈 peeking around the corner, with their head…
Don't forget to hit the like button if this helps you :) A perfect calibration square print has alluded me since I got my Ender3S1. Sure I have lots of prints that work but most of them are smaller and around the center of the plate. If I…
Activate firmware retraction in your slicer. Activate firmware retraction in klipper by adding this to you printer.cfg : [firmware_retraction] retract_length: 0.8 retract_speed: 60 unretract_extra_length: 0 unretract_speed: 60 Slice the…
A fully parametric polygon fidget. Printing tips: Decrease the printing speed Decrease the cooling fan's speed For a robust handle use 3 walls Ensure a good bed adhesion How to customize your own? You will need to download FreeCAD , a…
This is the openGrid adaption of the Underware system by Hands on Katie . The channels can be directly snapped onto the openGrid base board - the lite board version increases print speed and reduces filament usage. See my introduction…
Sometimes all you need is a 45/90 degree tool for tracing and cutting. It is a 2 piece tool that is a must-have in any Carpenter toolbox. You can use them combined and it is good to join wood planks at 90 degrees or to trace lines tracing…
Portable and handy Mini square with 100 mm scale for measuring stuff. The dimensions of 100x60 mm it is perfect for checking or marking the angle of your parts while staying portable and easy to put in a pocket. To ensure your print is…
I've been enjoying modelling SpongeBob characters lately, so I thought I'd try my hand at making Fred the fish. Done in Blender using mostly subsurf and boolean modifiers.
Squares See-Through Bowl - Vertically This 3D printable bowl features a unique geometric pattern of intersecting squares, creating a mesmerizing see-through effect. When viewed from above, the intricate latticework reveals a captivating…
