Counting matching models…
https://hazbinhotel.fandom.com/wiki/Alastor Alastor is the infamous entity known as "The Radio Demon" and is one of the many powerful Overlords of Hell. He has offered to assist Charlie in her endeavours, albeit, for his own amusement. He…
This case has 4 versions: Plain : No cutouts and no mesh Plain cutouts : This version also has no mesh but it has slits for GPIO and camera cables Mesh standard : A mesh is added in PrusaSlicer to the 3MF files. This only works when you…
yet another great file found over at the 3D Warehouse https://3dwarehouse.sketchup.com/model.html?id=u68712f10-7a38-41eb-aa6a-2bbc276fb497 Lots of errors with these files but still possible to print in the right hands. : ) My son was…
This is a replacement interior panel for the Ghostbusters Haslab Proton Pack. This panel includes a cut out for a Talentcell 3000mah Battery Pack: https://amzn.to/3HDwbBf Uses a USB cable mod from GBFans.com:…
🇲🇦 مرحبا بك في المغرب Welcome to Morocco! This model was made by Dany Sánchez . One of the most recognizable architecture features from the region south of the Atlas Mountains of Morocco is the Amazigh Kasbah, Ksar, or ighrem . The…
https://hazbinhotel.fandom.com/wiki/Alastor Alastor is the infamous entity known as "The Radio Demon" and is one of the many powerful Overlords of Hell. He has offered to assist Charlie in her endeavours, albeit, for his own amusement. He…
I used the holder with the Raspberry Pi wide-angle lens with a focal length of 6 mm. See technical drawing for exact dimensions. Print PLA 0.2 mm layer height printed as four pieces joint 2 w/ support 20% infill Additional material M2x 8…
I created a sanding block for the 50mm wide sanding paper I have. You'll need a M6 hex nut + a 15mm-ish M6 bolt.
You only will need some M3x40 screws.
Changed design for the shown bottles.
I cleaned up a set of old Christmas baubles and have derived some new things from it. This is one of the newer baubles and I test printed it with a 0.8mm nozzle. If you like this thing, you might want to check those too:…
Original model: https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/nikolasbabetas/Neopixel_Holder by nikolasbabetas You need to print 4 of the holders, and they fit in the upper extrusion. For full instructions, see the…
It is a cute Christmas ball with step file for name editing. Scale it down before print. PLA- 0% infill, 3 perimeters
Required parts M2 * 4mm GB823 screws M2 * 2mm (height) * 3.5mm (OD) brass heat set threaded inserts DASBOB keyboard created by GroooveBob: https://github.com/GroooveBob/DASBOB This model is licensed under a Creative Commons (4.0…
This Project was made for a friend, and there the sizes seams to fit well. So here the disclaimer: I did not check the size for myself, please use the FreeCAD file if you need so! Here I give you an STL to repair a may broken slider from…
This model is something I made based on a lack of an existing “perfect” solution. I wanted to convert the crappy peg-on Spirit Halloween 80% wand to a printed V hook that doesn't easily break and can be later converted to use for a Hasbro…
UPDATE - 22 November 2020 Added a set of new caps for Aux Jack mods. There is a flat cap with Aux Jack. Additionally, there are caps with the 3/4" stub with just the jack, the jack + 2 circuit holes, and the jack + 4 circuit holes. There…
This is a reversible wand tip modification for the Hasbro Neutrona Wand. Simply press the printed part over the existing tip. The fit is very snug, so it shouldn't fly off during normal use. I've tested it on both the Spengler wand and…
The first gasbottleholder needs screws. This version is slightly different and do not need screws. Some bolts holds everything in place. If you feel better, you can glue them together.
Note: This model was imported from Thingiverse where it originally used the “Customizer” add in. Fear not, it can still be customized by downloading the .scad code and open it using OpenScad! ------- Hats off to AndreasBastian's…
This is a remix of the top half of the Raspberry Pi 4 case created by plammers to include extra height to allow the fitting of the official Raspberry Pi 4 POE HAT.
I designed this canopy for Dronarchy so he could fly the DJI O3 in DLQFPV and MambaFPV ASBOX frame. Print in your favorite TPU. When you are ready to install the VTX just run some hot air over the Canopy to make it slightly more pliable…
Mounts for components commonly used in Meshtastic outdoor installations utilizing a weatherproof box. These mounts are for: RAK19007 WisBlock Board Raspberry Pi 4 Heltec v3 coming soon. They are meant to be used with a box which uses a…
I wanted a way to attach my Pi camera to the awesome case design that Malolo provided for the Pi4. I did some rough measuring of the printed case top, set up for a 30mm fan mounting pattern; did some modeling in F360, mashed some models…
"Your tasbih, always within reach." 33-piece Tasbih (Prayer Beads) that easily transforms into a stylish wearable bracelet. Updates: V2: Enhanced Flexibility V3: Tightened snap-fit mechanism V4 (Major Update): Replaced snap-fit joint with…
A Case for the Rasberry pi 3b+ with screws. It has air vents and a slot on the side to put in a note with e.g. the pins
This is a fully printable case for a Raspberry Pi Zero 2 & Camera Module v3 (Wide) that can be used as a face camera. The primary use case is a wireless HMC (Helmet Mounted Camera) for facial motion capture. For example the Brekel Body v3…
Hi, ich bin die Tage bei Amazon über diese 70mm Lampioneinsätze gestolpert:…
This will work perfectly and exact on your hasbro proto starter launchers. Enjoy!
These are a friction fit, press in mod that requires no permanent modifications to your 1984 hasbro proton pack. They can be a tight fit, so use caution. These files were created using reference from…
A simple mount for Rasberry Pi Zero.
I built a very slow movie player and I built my own snap-fit case. It features a perfectly-sized window for the display, with slide in holding mechanism for it, a 10 degree tilt up, pegs to fit a raspberry pi 4, and a cutout for power.…
Working on a version that has mounts for a BTT can bus interface A remix of a remix! Added mounts for 2 lm2596 buck converters, use a 90 degree usb c adapter to power your pi . Follow the print instructions from the original creator…
The case is a snug fit, with only 0.2mm offset from the DASBOB PCB. Layer height: 0.2mm or less Filament: PLA or PETG Required parts M2 * 4mm GB823 screws M2 * 2mm (height) * 3.5mm (OD) brass heat set threaded inserts This model was a…
This is a replacement ice cube for the Hasbro “Don't Break The Ice” game (non-vintage model). It is a relatively straightforward print. Printing Orientation You can print this either face down or face up. You can print it face-up with…
Stand for the Star Wars Black Series Kylo Ren Lightsaber Force FX by Hasbro A hole in the bottom has been added to prevent the lightsaber to swing back and forth Printed using pla with 15-20% infill, no supports needed Height: 265 mm…
Adapter damit man eine Asbach Flasche auf eine Jägermeistermaschine stecken kann. Man braucht zusätzlich Dichtungsringe. Wichtig ist das Material muss Lebensmittelecht sein.(PETG)
Need an easier way to take down your Beyblade stadium? These quick release locks have you covered! Simply insert and twist to lock in place. Features a raised and textured design for easy removal. Tested to fit the Hasbro stadium but may…
The model is stil in progres! Feel free to test and mention what else should be added in order to become a perfect case!
I couldn't find an Osu keypad using the Rasberry Pi Pico so I designed my own using mechanical switches To build this you will need 2x Cherry Mx or equivalent switches, 2x 1N4007 diodes, 4x M3x12 screws, a Rasberry Pi Pico and some thin…
Here you will find a holder for the Sodasteam gas bottles. This bracket can be attached to the wall. Have fun with it *Update: I made a Version 2 where the screw mounts are inside the frame
Mit einer normalen Pumpe ein aufblasbares Zelt aufpumpen. You can inflate a inflatable tent with a normal pump.
Bast on Sinns his Case that I like, But Becouse Im on a top floor where is very hot i need a case for good cooling for my raspberry p4 And also I want my hyperpixel 4.0 in it with a Dual Cooling Fans so i had to change some add a few to…
Meine Tochter hat leider das Futter von der Katze verloren und ich habe dies anhand eines Fotos nachmachen können. Für alle Eltern die keinen 3D Drucker haben, ihr könnt euch gerne melden, ich Drucke euch das dann ;-) ich kenne das…
🇲🇦 مرحبا بك في المغرب Welcome to Morocco! This model was designed by Mohamed Naciri @mohamed.naciri21 A kasbah is a fortification, citadel or stronghold, and this one is located in what was the port of Mehdya (also spelled Mahdiyya,…
Bracket para añadir un ventilador 3030 de refrigeracion a la raspberry pi zero o zero 2, esta conectado directamente a la placa y controlado por klipper. Bracket to add a 3030 cooling fan to the raspberry pi zero or zero 2, it is directly…
You can buy the Rasberry Pi Zero 2 here This is an on going project of the new raspberry pi zero. All dimensions are accurate to the CAD drawings provided. I have modelled a variety of the SMD components or readjusted from existing other…
Remix to accomodate TP-Link TL-SG108 (had de 94mm verison) a rasberry pi 3B+ with heatsink and my ISP ONU model AN5506-01-A1. The parts that are different from original are in Gray. Both of them connect with the LEFT TP-Link TL-SG108…
is that da freddy fasber octopus
A 3D model of the greatest small man ever, converted into a Saint, for those praying for this new religion
Modified case top for use with Armor Lite V5 cooler for Rasberry Pi 5. May want to double check the hole diameter, i had to shrink it down pretty small to fit my magnets. hex grid isnt centered on the fan, OCD beware.
I wanted to create a totem inspired dasbob case. Top and Plate are mirrorable to print left side, base cannot be mirrored. While this is not technically a remix, it's heavily inspired by…
This is a Raspberry Pi 5 Model B case that I designed. It has the ability for an RGB LED to be istalled on the top right or left. On the Back of the case you can unscrew the back panel to reveal some passages for the wires needed to hook…
I made this for a project, and I'm really happy with how it turned out. I am not an experienced CAD designer, but I thought that someone might like this design as much as I do! It uses an 80mm radiator and fan, with a cheap water cooling…
The '84 version of the Hasbro Neutrona Wand does not have a painted hat light on the main body like the Spengler version does. This is a simple cover that fits very snug, so no glue is needed. Just print and press on. I printed mine with…
While I liked the look of the stand that shipped with this prop, I found it pretty flimsy. I took measurements and copied of the parts I liked into a new Fusion 360 model. This print is much more stiff than the original stand and works…
this will work with the TMC short AK hand guard. but it can be used on other markers as well like the FGC68. a recommended thing to print is the barrel sizer so you can get close to the size you will need for your 7/8 barrel if you like…
Ersatz für den Korkverschluss einer 3 Liter Asbachflasche. Zusätzlich wird ein passender Dichtring benötigt. Je nach Flaschenöffnung kann die erforderliche Breite variieren.
Camera mount for Prusa i3 and standard rasberi PI camera module. Function: camera holder place under the screw Heat Bad (print only one) can move camera left/right can move camera front/back can rotate with camera without screw all things…
//* Nerf dart carrier uploaded, sorry I forget it Recently I bought a Tie Striker in a flea market without a wing. My son was so excited with it that I did a spare wing for replace the missing one. There is two versions: Ala.stl is the…
Behälter mit Schraubdeckel für die Rituals Body Lotion Nachfüller. Somit braucht man nicht mehr die Glasbehälter mit zu kaufen. Achtung!! Nicht für Nachfüller für die Kunststoffvariante geeignet. Die Abmessungen sind anders.
This is a modification to the End Cap to allow you to use the CNLINKO LP-16 M16 Connector https://www.amazon.com/dp/B0816BMDKQ?ref_=cm_sw_r_apin_dp_Z64RTF47HAMNZWPDRRAZ I had another person make this for me based on the original design
I have designed some alternative canopies for the ASBO X. Take your pick if you would like to customize your craft. Check out https://dlqfpv.com/collections/frames/products/asbo-x if you would like to pick up a frame.
Set of grips for Hasbro starter launchers Easy to use and ready to install. You can choose from couple of different sizes . Find yours and get ready to fight! The starter launcher is supposed to easily click in. If you're having trouble…
This massive stairs was printed on my Anycubic Chiron with 0.6mm Nozzle, 2 Walls and 8% Infill, without any supports but 30mm brim! Filament Use was about 400g. On the highest point it is 416mm high. To print the right side of the stairs,…
This model allows for a triangle connection. But not any connection; a Pythagorean triple: https://en.wikipedia.org/wiki/Pythagorean_triple Triangles are awesome because they're strong, and this way you can harness that power in…
The 3 is becouse it is the 3 version of the model, it is ment for a rasbery pi 4 with a fan cooling stack. modeld like a desktop pc, rgb recomended, if you like it please leave a like.
I really loved A simple case for the DASBOB keyboard which fits perfectly with the pcb. However the tenting in that model was too bulky for my taste so I designed new from scratch. I printed on Bambu A1 with BambuLab PLA Silk 0.4mm nozzle…
Da der Junior unbedingt mit dem ASB1 fahren wollte, aber sich auf der letzten Fahrt zwei Dämpferteller verabschiedet hatten, mussten kurzfristig neue her. Ich habe sie in PETG mit 100% Infill gedruckt.
Wer nur kleine Glasbaustein Kippfenster in Bad oder Toilette und dennoch Lüften möchte muss die kleinen Fenster immer offen stehen lassen. Da ich noch Fliegengitterreste über hatte habe ich mir diese kleinen Rahmen überlegt. Dazu…
three with Christmasballs and Christmasstar in a pot The print on the photo is printed at 50%.
Standfuss für Gasbrenner ( GB-2001 ) aus dem letzten Jahrtausend ( Ca. 1992 ) - Guter Stand - Satte Klemmung - IDØ 36mm ( 1992 ) - In “jedem” Winkel verwendbar - Bohrung zum Wiederbefüllen - IDØ 15mm Apropos Gas-Brenner: Ü30 und läuft wie…
This is a remix of Ledronclubs toothpick canopy for 14x14 cameras. Made thicker in meshmixer and added height. Specifically to MambaFPV's specs for his ASBO X 3 inch frame. https://www.thingiverse.com/thing:3499430
baywatch bow keychain Print Settings Rafts: No Supports: Yes Infill: 60% Category: 3D Printing
My version of Raspberry Pi 3 B Cooler 30mmx30mm Holder
Camera accessory mount for Creality Ender-3 V3 SE. You can attach GoPro (and similar) accessories to the mount. Mount also holds Raspberry Pi 4 case. I use it to attach @Geek5D's Raspberry Pi Camera case (with a Raspberry Pi V2 camera) to…
This is a snap-fit case for the Rasberry Pi 4 b with mounting holes.
Blade bushing for Bosch ASB 10.8LI Hedge Shears. Recommended to print in ABS or Nylon or PETG for strength.
Hey everyone, I wanted to share with you a basic and simple design for a Raspberry screen that I found on Amazon. You can find it at https://www.amazon.co.uk/gp/product/B07QK. This design relies on a push-fit mechanism, which means it…
I constructed a holder for strapping my 5kg gasbottle in my RV down. It can be screwed down and fits strap with 2,5cm width. No Supports needed.
ABSIMA ASB1BL SAND BUGGY Front or Rear Skid also fits for these cars: T2M Pirate Sniper DF-Models Dune Fighter BSD Racing Prime Desert Assault MODSTER DUNE RACER could also fit for Redcat Racing Blackout...? enjoy!
Auf unserer Konainerwache ist es nicht erlaubt etwas an die Wand zu hängen wo ein Nagel oder Schraube von Nöten ist. Da dort aber die Wände magnetisch sind habe ich dieses Zifferblatt entworfen. Mit 3 12x3mm runden Magneten in den Füßchen…
Just a couple things I modeled up to replace parts on my boys toy lightsabers. No supports required for anything, just print them with the flat base on the bed. The blade takes a litte bit to get it worked loose, but after that it's…
its a case for a raspberry pi zero of 2w version
Just simply Cathedral of Our Lady of Strasbourg Line
A friend of ours created a custom PCB containing a display and Pico W for an engineering class that my son is a part of, and so we decided to create this 3D model of a case that could hold the custom PCB components. Case is approximately…
This is a simple cable clip I created to route Raspberry Pi camera ribbon cables. Attach to a surface using double sided tape, and the cable clips right in. It has a little wiggle room, so you can even hold a few cables in one clip (or…
A Herbgrinder hidden in a Christmasball. Perfect decoration for your christmastree. The model is constructed to suit 4mm magnets, which are essential for the proper hold. Enjoy the Holidays.
Made as a stand-in so I could model & measure my 3D-printed cases without having to use my actual pi.
MambaFPV came to me at Christmas of 2023 and asked if 2024 could be the year he gets his own signature frame. Well, it's been a bit of a journey to get here, but here we are, October 2024, and we are ready to release the ASBO Mamba No. 5…
Hasbro Clone Helmet Targeting System functional
Card bracked for all banknotes and item cards
Absima ASB1BL Wheel Hub with Pin (4) Buggy/Truggy Radmitnehmer 12mm (4) Buggy/Truggy Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.1 Infill: 100% Category: R/C Vehicles
I came across this Pi Zero UPS ( link ) and decided to create a sturdy case to protect it and keep it secure. https://s.click.aliexpress.com/e/_omeOqNL alternative link:…
Used to mount all PCBs together and allow for an upright position. Raspberry Pi 3B+ Raspberry Pi PoE Hat CSI-to-HDMI Adapter Modifications needed: Drill out holes of CSI Adapter to 2.5mm Mounting Hardware needed: 4x M2.5x10 (Bottom 4…
Hasbro's Battle Droid Blaster is one of the most accurate toy props they have ever released. That is not to say it doesn't have a few imperfections but this upgrade kit will help fix them! THIS IS NOT A FULL MODEL OF THE BLASTER. Just…
Requirements: Print the controller holder horizontally for better quality 4.3" waveshare display with Raspberry Pi (4/3/2) inside of this box model https://www.printables.com/model/189275-raspberry-pi-case-for-waveshare-43-inch-dsi-lcd-mo…
Shop signage Category: Signs & Logos
After friendly advice from my neighbor, i wanted to decouple prusa mini from sideboard for its night jobs ;). For shure there are a lot of great anti vibration foots designed for prusa mini here. But i wanted to bring some extra mass in…
