185 models
The Shell Case is a simple and effective solution for organizing cooling on the ASRock AMD BC-250 module. This snap-on shell allows you to mount a single fan quickly and securely without modifying the card or its case. The model requires…
The 1.2L Replacement case for DeskMini x300. Basic “slots” styled core that's compatible with the whole DeskNano x300 system. This core fits most coolers, but doesn't fit Wraith Stealth. See if you can print this first, since the other…
ASRock BC250 Complete-ish CAD 3D Model Why Does This Exist? My project required a detailed ASRock BC250 model so I could design custom cooling and enclosure solutions. Every public BC250 model I found was either dimensionally inaccurate…
Asrock B450 Pro4 IO/shield. Category: Electronics
Here is the Asrock B450m Pro4 IO/shield. Enjoy! Category: Electronics
Updated geometry to fit with a different graphics card. Inner mounting holes needed slight adjustment. I also shrinked the hole for the standoff screw just a tiny bit so you can use a heat press insert (M3). I also added a simple cover…
SmallFormFactor.net forum post Design features Smaller than original DeskMini case Increased cooling performance across all components Decreased noise/turbulence More aesthetic choices Filler options for de-soldered VGA systems (see…
This is a replacement I/O Shield for an Asrock B550M Pro 4 Motherboard. It should snap into place on it's own. If you wish to add metal shielding, the I/O Shield is 2" tall - the same height as 2" aluminum foil tape used for ducting. It…
This is adult Asriel Dreemurr from Undertale, made by request from my girlfriend who loves the game. Asriel just slides in the base (which is reversible, there is the Delta Rune or Flowey, you choose). It holds well, but if you want you…
The suppressor goes over the muzzle brake . Thread on bottom of the muzzle brake is 14x1L , compatible with most AK style replicas , muzzle break - suppressor body joint is a M22 standard thread with 1.75mm clearance , suppressor-end cap…
ASRock BC250 to AM4 Cooler Adapter Why Does This Exist? I wanted better air cooling for the APU in my ASRock BC250 Steam Machine. The existing AM4 adapters I found did not accurately account for mounting height or the offset processor…
If you like my work and want to support me, here is the link Buy Coffee These is my case for AMD BC-250. It is designed for the BC-250 motherboard and Flex ATX power supply. The case has space for a heatsink on the backplate, heatsink can…
Asriel Dreemurr A version of adult Asriel Dreemurr sitting. there are two version, this is my first model, if you need something, let know and i will fix it. Feel free to Share your Makes and tag me on Social Networks if you print it! You…
das ist mein erster Make, bei Problemen oder Fehlern schreibt mit bitte das ich was anpassen kann. ich empfehle das ganze in etwas festerem tpu zu drucken. die Konen haben alle eine 2,5mm Fassung für Standard 2,5mm Carbon Stangen, um mir…
Here is my Adjustable Spool Roller. It can hold spools from 19cm up to 30 cm of diameter. Dimensions typical for 0.8 - 3kg spools. asr_axle - 4 pcs, asr_roller_L - 1 pcs. asr_roller_L - 1 pcs. 608 bearings - 4pcs. Print Settings Printer:…
🇸🇦 مرحبا بكم في الحجر Welcome to Hegra This model was created by 3D artist Marc Mons. Qasr al-Farid , meaning “ the lonely castle ” in Arabic, is the largest tomb in the archeological site of Hegra (Ancient Greek: Ἕγρα , Arabic: ٱلحجر,…
I modeled this shield after the the dimensions of the motherboard. It fits perfectly on the board and in the case. It is a bit bigger on the ports opening than the original metal one but it still looks nice and quality. I have made it…
AssemblyAid: -For dart cups with a neck diameter of 5mm -For dart shafts with a diameter of 2,5mm Notice: With the assembly aid, the shafts can be glued straight into the cap with superglue! Dart Cup Dimension(mm): Cone_Diameter: 16…
The IO Shield that comes with the X470D4U motherboard does not fit the SuperMicro SC512 series chassis. This solves that problem. This was modelled with a SC512F-350B chassis. Print instructions You may need to slightly shave with a sharp…
Hey zusammen, ich habe hier den Griff, das Mundstück und die Endkappe für ein Blasrohr erstellt. Benötigt wird ein 12mm Alu Rohr aus dem Baumarkt mit 1mm Wandstärke, das man auf einen Innendurchmesser von 10mm kommt. Um es wirklich…
Into 1:72 scale model radio control ships. Usually we buy 1:72 scale fibreglass hulls from somewhere like APS Models and then scratch build the rest of the ship ourselves (e.g. propellers, motors, servos, radios, deck, superstructure)…
Revisiting a concept I made about a month ago, I started from the ground up on a new design piece. The design directed I wanted to move towards was to give it a large amount of activity when assembling the case, so that there would be an…
Blasrohr Mundstück für Außendurchmesser von 20mm und Innendurchmesser von 18mm im vorderen Bereich beträgt der Durchmesser 20.8mm, sodass man Platz für Schrumpfschlauch hat. Die zweite Variante ist kleiner nur 20.2mm für die Verwendung…
IO shield for ASRock B365m Pro4 motherboard. Partially based on Peggy67's B450m Pro4 shield, rebuilt off of Renaud11232's blank shield. I bought a used board that didn't come with a shield and needed to finish the build. STEP file…
This design allows you to improve airflow without modifying the original cooler. When paired with a high static pressure 120mm fan (e.g., Arctic P12 Pro), it provides sufficient cooling for everyday use and gaming. In my setup, CPU…
I remixed this model from the original Noctua design to fit into my Asrock Deskmini X600 with the Noctua NH-L9a-AM5 fan. It should be suitable for the AMD AM4 and L9i (Intel) version and Deskmini X300 as well. You just need 4x 20mm M3…
Description A custom CPU cooler mounting plate and optional backplate stiffener for the ASRock BC-250 . This adapter is specifically designed for the Thermalright AXP120 , but it should work with other CPU coolers that share the same…
40mm Fan mount for Adaptex ASR-7805. Card is recommended in NAS Killer 6.0 build guide from serverbuilds.com. The HBA needs a cooling fan and this will mount a 40mm fan to the heatsink.
YASR is currently a work in progress. I will add more panels over time. Important: Front panels follow the measurements specified in EIA-310/Eurocard. A rack unit (U) has a height of 1 ¾ inches or 44.45 mm and for a 10" rack 254 mm in…
IO Shield for ASRock Z87 Extreme4 Motherboard 2020-11-17: Added second version, more like original one (with holes for audio). Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 100%…
this is part specific, guaranteed fitment with… asrock b650i lightning, with IO plate removed asus 4060 lp with io shield removed and up to about 69-71mm cpu cooler clearance, I have used a IS-55 with a P12x25mm you want a 120mm fan for…
Housing for BC250 with FullATX PSU. A1 mini friendly (179.5x179.5 mm footprint). I used PETG-GF filament. There is no hole for power button in the STEP file, I drilled after printing. For ATX power to work - I used a mod taken from BC250…
I had a AsRock Z170 Pro4S Motherboard laying around, unfortunately I lost the I/O shield. I modeled this one up as a replacement to finish up the build before I sold the computer. Unfortunately, I didn't take any pictures of it installed…
Hello, Enclosed is a custom replaceable shroud for the ASRock A380 Challenger ITX. I found the original a bit boring and wanted to match the design to my case. Assembly Instructions: Print in PETG @ 15% infill Flat sides down. Do not…
Blasrohr-Dartpfeil mit Gewinde für Standard-Dart-Spitzen. für 20mm PVC-Rohr gibt es im Baumarkt, PVC-Rohr für Kabel-Installation. Ich empfehle ABS, PETG oder PC (PLA könnte bei hartem auftreffen eventuell brechen) TPU müsste besonders…
The project started as a concept for a cylindrical “Trashcan” Chassis for the ASRock X300M-STX found in the Deskmini. The whole thing measures 225mm tall from end to end, not counting feet. 175mm in overall diameter from the widest parts.…
ASRock Industrial NUC 1100 Series Rackmount Kit for 10" server cabinets. The NUC is attached to the cage using two VESA mounting screws on the bottom. Alternatively, it can be fixed with a velcro strap. The front plate has 5 connectors,…
Folgende Dateien stehen für FM268M-DG3+ zur Verfügung: V1_ATX_Slotblende_FM2_ASRock : Die Blende muss nachgearbeitet werden. Der Einbaurahmen ist etwas zu groß. Den hervorstehenden Rahmen mit dem Cutter abkratzen hilft.…
IO shield for the ASRock Fatal1ty AB350 Gaming-ITX/ac board. Update 20260114: reported to fit the Fatal1ty B450 ITX aswell
Um das Lock im Luftfilterkasten zu schließen
""UPDATE GEN 2026: I apologize to anyone who tried this project cause it was missing the power button and the radiator side clear dome. I know it's been some time from my last posts, but life got in between and I got lost in it. If you…
Abdülaziz Av Köşkü ya da başka bir adıyla Kasr-ı Hümayun , İzmit 'te bulunan barok ve ampir üslupta bir köşktür. Son şeklini Abdülaziz devrinde alan yapı, Osmanlı Devleti 'nde İstanbul dışında yapılan tek küçük saray olarak bilinir.…
I lost the IO Shield for my ASROCK H310CM-DVS Motherboard, so I created this one. Print Settings Printer Brand: Anycubic Printer: Kobra Max **Rafts:** No Supports: No **Resolution:** .2 Infill: 10% **Filament:** N/A PLA N/A Notes: Should…
EDIT! This item is now obsolete, the newest design can be found here: https://www.printables.com/model/319513-spiggytech-portable-chassis-for-asrock-x300m-stx This project is a work in progress The idea is to build a small enclosure for…
IO shield for the ASRock H310CM-ITX/ac board. Mine came new but without any accessories so I needed to make one. There are two versions available. One with additional stiffening ribs.
This is a remix of the blank IO shield from geerlingguy for the AsRock Fatal1ty Z170 Gaming K4/D3, since mine didn't come with one. Since I found the original to move around a lot, I also added some intentionally slightly oversized small…
Blasrohr Pfeile Halter für 4mm Spitzen. Abstand der Pfeile 20mm, dadurch für alle Blasrohrdurchmesser.
Hello everyone! This is a case I designed for my BC-250. I wanted something compact and portable that I could easily take with me without sacrificing cooling, so I ended up making my own. My BC-250 has been repasted and has the full CPU…
Replacement wheels for a shop vacuum that was sold by several brands: Metabo ASR 25 Bosch GAS 25L Starmix ARD 1225 There may be more brands There is supposed to be a bushing too, mine was missing and too thin to be printed so i left it…
Takes 2 120mm fans and a single 80mm fan all 25mm thickness. Sounds way more bearable now at 100% fan speed and i get -5 degrees less on the hotspot. I used 2200RPM fans to better match the old fans. Link to the fan adapter:…
ASRock BC250 Crossflow Steam Machine Case Why Does This Exist? I designed this case for my own BC250 Steam Machine build and to fit in the space behind my Hisense U6N television. Many existing BC250 cases point a large fan at the board…
Blasrohr-Ständer/blowpipe stand/holder "pipeboy 25" Für Kaliber 10; 12; 16 Für den Transport kann der dorn auf die Seite der zusammengeklappten Füße geschraubt werden Die Füße haben Löcher für die Verwendung von Erdnägel für die…
I modeled this shield after the the dimensions of the motherboard. It fits perfectly on the board and in the case. It is a bit bigger on the ports opening than the original metal one but it still looks nice and quality. I have made it…
This is an IO Cover for the ASRock Z370 Pro4
This is a mouthpiece for a blowgun. It is designed for a 12mm pipe (inner diameter: 10mm) so I can shoot Bang Snaps with it. It should be printed with supports. Organic supports have worked very well for me.
A remixed IO Shield of Petr Sedlář's A2SDi for SC505 Chassis IO Shield , but instead made to be compatible with the AsRock Rack X570D4I-2T motherboard. The STL is extremely dirty, but I'll clean it up once I have the time for that. Bambu…
Erster Versuch Bitte wenn ich Verbesserungen habt lasst es mich wissen. Sollte ganz ohne Supports Funktionieren versucht es ohne das einzige das manche Programme supporten sind die Radien Supports sind aber nicht nötig außer bei der…
Updated 6/3/2023 Added screw holes for TPU feet. Also added feet to be made in TPU. Redesigned it from the ground up. This project is a work in progress I took the strong points of the original design and revamped it in such a way that…
Use 10mm aluminium tube. The mouthpiece fits snugly. A couple of different designs of a shaving stand for the Merkur Futur 700 safety razor, which has an uncommon handle dia
Asrock 870 Extreme3 R2.0 IO shield I have printed in both PLA and PETG. for my PC, i am using PETG. This model is based off of other model mentioned below in tinkercad.
ReadMe.txt Sortimentsbox fuer 5x20mm Glasrohr-Feinsicherungen Anwendung: Diese Sortimentsbox dient der Aufbewahrung von Glasrohr-Feinsicherungen der Groesse 5x20mm. Es finden bis zu 10 "Briefchen" mit Sicherungen darin Platz. Für lose…
Clamp to fix both pieces of the big bore blowgun together to store or transport it. It fits all blowguns with a diameter of 19mm. Fits with quiver! Klammer um beide Rohre der Cold Steel Big Bore Blasrohr zusammen zu halten um es klein zu…
Blasrohr Mundstück abgeänderte Form für Innendurchmesser 16mm und Außendurchmesser 22mm https://www.printables.com/model/1014775-blasrohr-mundstuck
CAD of the M5Stack ASR6501 LoRaWAN module, with antenna. Useful if you want to design IoT modules and just import external components. I haven't modeled the interior. .F3D, .STEP and .3MF included. .STEP and .3MF without antenna. .STEP…
I use Thread-Inserts M4 for the Fans Use tapping screws for fans to secure the adapter. Screw it onto the heatsink fins.
A simple Fan Duct for Asrock Deskmini X600 with Noctua NH-L9a-AM5
This is a basic but functional 3D-printed bracket designed to mount a 120mm fan onto the ASRock RX 7900 XTX Phantom Gaming graphics card. My CAD skills are still a work in progress, so it’s not the sleekest design out there—but it fits,…
Made a cover for my Asrock deskmini to look like a tiny 386 style computer. I printed in bronze (all I had at the time) and spray painted with primer and fossil satin paint from rustoleum. Category: Electronics
New style of cable clip that i design for my ASR4 sim rig from Advanced Simracing, it will fit other 1st gen and 2nd gen Advanced Simracing rig or monitor stand. I still recommand my other model for 1st gen rig and monitor stand but this…
It is surely far from perfect, but if it works for me it might work for you.
An IKEA SKADIS mount for your mini-ITX motherboard. It's designed for the AsRock N100DC-ITX, but will most likely fit other boards, too. It's very sturdy , prints without supports and if parts are positioned as recommended, layers will be…
This model has been discontinued from development. A new design can be found here. Designed it from the ground up. This project is a work in progress At Sub3L, this is a 3D Printed complete chassis for the ASRock X300TM-ITX . The cooler…
Mini pc with modern CPU are still very expensive, and they also have the disadvantages of using soldered CPU or sodimm ram. I choose this board for the cheap price while still being compact, even if it's not an itx board…
This model will only work for this exact combination of case, cooler and motherboard! Any other combination will most likely change the position of the cooler in the case. Feel free to remix.
As asked I post my remix of the noctua fan duct for my asrock deskmini X300 case. I first added some holes so only 5mm of the original hole's depth is left and I can use 20mm M3 screws. Then I added some more cuts so I can close the case…
Asrock z77 extreme 4 IO shield
This friction-mount shroud allows a standard 60mm fan to be mounted to the passive heatsink on Asrock C2750D4I avoton motherboard to increase cooling for cases with limited airflow. Print Settings Printer Brand: Wanhao Printer: Wanhao…
IO Shield for the Asrock 990FX Extreme 4 motherboard
Gedruckt auf mk3s+, PETG, 0,2mm quality im Prusa Slicer 2.5.0
Hi! I made 3D model for the accessories of the asrock deskmini For the moder who wan integrate to there creation
Simple IO shield for the ASRock Z370M-ITX AC. Default print options, no supports.
I designed a simple IO-shield for the ASRock J3455, maybe it fits a few others like J4… or J5… but can't say for sure. I used aluminum foil to better shield EMF, not sure if that's needed, but it doesn't hurt and is easy to do. have fun…
I saw a comment on the original make that the hot air is dumped out over the SSD. I added a 40mm fan to bring in cool air to hopefully counteract that. This uses 4 M3 heat inserts and 4 M3 screws to secure the fan to the case. The wire…
I've inserted magnets in the bracket to snap it to the case, but I've included a solid version to tape down or add your own holes for magnets.
Asrock Deskmini (X300, A300, H110, etc) hat to install full-height (25mm) 120mm fan for better and quieter cooling. Compared to V1, hat gained 10mm but fan can be fully inserted, no side cuts to eliminate air leaks. Attention: Necessity…
Ich habe hier die Drehregler von meinem Weber Q 3200 nachempfunden. Die Originalen haben leider wiederholt ihre Beschriftung verloren. Das passiert jetzt nicht mehr. Gedruckt auf einen A1 mit PETG und dem Strenght Profil bei 0.2mm…
Adoper original desigl by removing VGA port. Fits Asrock B550 RP Riptide perfectly.
Asrock Deskmini (X300, A300, H110, etc) hat to install full-height (25mm) 120mm fan for better and quieter cooling. Attention: Necessity of irreversible case modification . Fan compatibility tested: Noctua NF-A12x25 - compatible Noctua…
Für das Scharnier einfach z.B. ein Stück Büroklammer einkleben. Die Löcher sind zum Einkleben von Magneten mit 3mm Durchmesser und 2mm Tiefe. Das ist nicht zwingend notwendig, fühlt sich aber sicherer an, da der Deckel weniger Chancen hat…
Dimension model that shows die location and mounting holes
This is a remix of the original ASRock B450 Pro4 IO Shield with a redesigned appearance for AMD-based systems. The model is available in two versions: Ventilated - includes additional cooling slots to improve airflow around the rear I/O…
This is just a quick mount for the Wi-Fi antenna that came with my ASRock motherboard. It came with a mount and double sided tape but it didn't go anywhere very well. This mounts the antenna without the included base to a monitor arm…
Die Blende passt jetzt für ein ASRock TRX40 Motherboard. Die Backplate Blende wurde mit den IO des Mainboards angepasst.
Just a simple cable comb clip to suit the Asrock Steel Legend X670 board, this is just to manage the USB 3.0 and USB-C Type-E header connectors, probably very specific to this mother board, but you can try it on others if you think it…
Griff für Blasrohr Aussen-Durchmesser 14 und 20mm PLA oder PETG Zusätzliches Material: M3x16 Schraube für das Scharnier (Schraube formt das Gewinde selbst in das Druckteil) M3x40 und 1x M3 Mutter (zum Kontern) für Schraubelement M3 Mutter…
It's a simple replacement for a lost or broken antenna stand. The original antenna clips in and stands upright.
Interchangeable spool Hardy ASR 5000 reel Tested for 4 years
Der Winkel ist 180mm auf 180mm Glascheibe solte 5mm dick sein.
