52 models
MeLE Quieter3C mini PC Synta finder scope mount for astrophotography. I made this to mount my mini PC on the 80mm refractor OTA. Supports are required for the overhanging section. The design has holes for two M3 screws. I have used M3x8…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
MeLE Quieter3C mini PC Synta finder scope mount for astrophotography. I made this to mount my mini PC on the 80mm refractor OTA. Supports are required for the overhanging section. The design has holes for two M3 screws. I have used M3x8…
Print approx. €1.88–€2.29 excl. taxPreliminary estimate for PETGSource material: PET
EDIT 9/27/26: Added new, basic assembly instruction and updated (incomplete BoM) EDIT 3-7-26: Uploaded files for the new, Linear Bearing 3D Printed Focuser! The focuser drawtube runs on two LWL7B Linear Bearings with a T5 Lead Screw for…
A simple cable management comb for ZWO ASI cameras with a 78mm diameter. Fits snugly over the camera and provides support for cables coming off the back. Printed in ASA (or ABS) for the best fit and UV/temperature resistance. The inner…
A simple cable management comb for ZWO ASI cameras with a 90mm diameter. Fits snugly over the camera and provides support for cables coming off the back. Printed in ASA (or ABS) for the best fit and UV/temperature resistance. The inner…
EDIT - Read full description below as some parts have changed. Please join the discord if you have questions as I may not see them here in a timely manner! - https://discord.gg/QdPa9ed6Jq Building of the success of the DBS114 , I now…
Bahtinov mask designed for either a telescope or a camera lens. The main difference between this and other masks I've found is that this one is designed to work on either a normal camera lens or a telescope. That means allowing a very…
Note: Due to differences in the shape of the Nikon vs Canon version of the lens, this file will need to be slightly modified if you wish to use this with a non-Nikon Roki/Samyang 135. Specifically, the raised lip on the inside of the rear…
Small dovetail bar that can be inserted into common guide scope "shoes". Measurements in mm are shown in the attached screenshot. I used it to mount my OpenAstroGuider (see…
Make your own harmonic drive astrophotography mount. Achieve sub arc/second error rates for well under 500 USD. Unfortunately, projects like this need a large amount of bravery. I would rate this as 8 out of 10 difficulty. You have been…
Easy way to mount Power Supplies, Small PCs, Focuser Controllers, Dew Heater Controllers or anything with a flat side. Print vertically for extra strength around the clamping face, using 15% infill with PETG. Will work on tripod legs…
-NON PRINTABLE : *2 M5 screw as many rubber band as you need The DIY telescope phone holder is a clever solution that allows astronomy enthusiasts to easily document their celestial observations. Made from plastic, this holder securely…
A mount for the Samyang 135. M5 screws and M5 insert nuts are required.
Consider supporting my work on Patreon: https://www.patreon.com/c/Designbydave This Remote Electronic Focuser was designed to be used with my 12.5 inch Dobsonian Telescope but can be modified to focus most telescopes. 3D Printed in…
I started doing astrophotography with just my mirrorless Canon EOS RP, and I'm loving it. While I'm saving up to get proper gear, I'm trying to spend the cloudy nights improving my current setup. Check out this Lens Stabilizer Ring too.…
Updates: Aug-10 2017: 2.0 update. Was not happy with uneven clamping. Increased clamping screws to 6, decrease mounting screws to 2. Tweaked front cap to maybe print better in ABS. Aug-9 2017: Added a notch to outside of rings and inside…
Overview The mount features a worm gear and wheel with a reduction of 100:1, and has shown preliminary good results tracking objects in the night sky and photographing them. This is not a complete build guide, but more of a starting point…
I couldn't find a reasonable DIY tripod online that I felt was sturdy enough, easy to build and suitable for the OpenAstroTracker (OAT)*, so I designed this one. A few designs I found online ones looked suitable for astrophotography, but…
This mount enables you to attach each smartphone to a telescope. It does not matter if the eyepiece is 1.25 inch or 2 inch, the mount can handle all diameters up to approx 2.1 inch. The two pictures of the Moon were taken using this…
12v Power Distribution Box for Astrophotography Run your Mount / Camera / EAF in one to clean up your cabling. Make sure you are running atleast 18AWG wiring to handle the amperage. I am using a 12v 5A connector to run my focuser, mount…
ZM-1, aka Monique l'aventureuse des étoiles Approximative cost : 350€ (with printed parts and electronics) Weight : 1.6 kg Usable charge : TbD, 3kg expected BoM 3D parts PETG parts (60g) : carter + support_batterie PC-CF parts (400g) :…
Introduction This astrophotography tracker was designed for use with a lightweight camera & lens combination to allow long-duration photographs to be taken of the night sky. It was created to meet my specific needs but, as it's designed…
Flat Light Box for create Astrophoto Flat Frame on Sky-Watcher Newton 150/750mm telescope. FreeCAD source on https://github.com/romanhujer/Accessories-for-the-telescope/blob/master/FLB.FCStd Category: DIY
A telescope camera mount for the Raspberry Pi Zero. Full details on Instructables | http://www.instructables.com/id/Astrophotography-With-the-Raspberry-Pi-Zero STLs orientated and chamfered for best printings. Print with your favourite…
Astrophotography harvester for Samyang 135mm f/2.0 ED version 2024 Support ZWO EAF and ZWO ASiair My original version is here OpenSCAD source code on GitHub BOM 1x Samynag 135mm f/2.0 ED (Canon or Pentax version) 1x ZWO EAF 1x ZWO ASiair…
An adapter to connect an astro camera to the Nikon 180 mm F/2.8 AI-S ED using a T2 mount. This way you have a cheap EAA setup with a Skywatcher AZ-GTI. The lens is firmly locked with an M2 screw. It makes sense to print the thread as…
Simple housed light source utilising dimmer to accurately achieve your FLATS up to a OD OTA diameter of 186mm Keeping your exposure time to what you want you can just adjust the dimmer to suit that exposure time, as required. If you do…
This is a small adapter plate to convert a cheap logitech C270 webcam to a polarscope for Skywatcher HEQ5/EQM35. This allows you to remove the faceplate and 3 screws, put a piece of electrical tape over the green LED and slide it directly…
Works alright. Made for the SVX102T flattener and reducer, but can be easily resized to your needs. I used one successfully on threads, and a pair on smooth tubing. 5mm thickness is fairly sturdy and makes alright contact. It can still…
Make your life easier but putting these stakes out to make polar alignment easier since you can hit the same spot every time. Spend time to get everything in the exact position that you want and mark your spots and add stakes, this will…
This is a design for a 3D printable guide scope. A guide scope is the same as a “finder” scope except it has a camera interface instead of an eyepiece interface. It is normally used to track stars and keeps the main scope pointed at a…
A blank filters for darks, I used it in the past to take darks with my filter wheel and my color camera, Works if printed in black filament or put gaffers tape over it to make it dark!
One entry in a line of eyepiece cases I'm working on to encompass my whole eyepiece/lens collection. This case is built around the ZWO ASI224MC Astrophotography Imager. It's a very tight fit (by design), so it's unlikely it will work with…
This is a holder for the Ellumiglow 8 inch circle EL Panel they sell targeting astrophotographers for taking flats. I'm using this on a Celestron C6 (6 inch SCT), which is why the opening is smaller than the panel. This was intentional to…
Simple clip adapter to mount a laser pointer onto a camera's hot shoe - helpful for targeting objects, as required in astrophotography. Sizes The design was made for laser pointers with diameters from 10 mm up to 20 mm. At the moment…
Astrophotography red dot finder adapter with Swiss-Arca plate for tripod clamp. Category: DIY
Focuser is 28 mm higher for a right backfocus of mirrorless camera
Requires parts from V3 114mm travel telescope, 450mm version, please support the original OTA mods these sets of parts replace the stock version to move the focuser, viewfinder and phone mount to make ease of use on an equatorial mount or…
Astrophotography harvester for Pentax SMC DA 18-135mm f/3.5-5.6 ED AL [IF] DC WR Support ZWO EAF and ZWO ASiair OpenSCAD source code on GitHub BOM 1x Pentax SMC DA 18-135mm f/3.5-5.6 ED AL [IF] DC WR 1x PK-EOS Mount Adapter Ring 1x ZWO…
Hard case with soft TPU liner for the Astrowl astrophotography camera off Cloudynights.
Astrophotography 12v PWM Control Box - Dew Heaters / Fans utilizing PWM (pulse width modulation) controllers for astrophotography telescopes. Control 4x Dew Heaters or Fans or both with this unit. COMPLETED for about $20 Retail PWM…
Prints The lens support and focuser support are parametric designs in Fusion 360. The CAD files are included to enable modifications or remixes. I printed at 30-40% infill with 4 perimeters from PETG. Two of these parts use brass heat…
A Parametric Light Box for Astrophotography Flats Case and OTA adapter for an Ellumiglow round panel: https://www.ellumiglow.com/electroluminescence/astrophotography Render STL using OpenSCAD: https://openscad.org/ Edit flat_box.scad to…
I modified the STP file to print in Bambulab P2S 0.4 nozzle. The tolerance in this printer is 0.1mm The original was too loose for PETG. CAD file modifled to print direct. I add the 3mf file. Printed in PETG
Make a statement at your next convention with this Bahtinov Focusing Mask, 8 Inch Telescope, Astrophotography Focus Aid Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
rototype status — not yet physically tested This V3 design has not yet been printed, assembled or validated on a telescope. The source geometry, mating interfaces, screw lengths, support-free print orientation, electrical calculations and…
Notes update - Redesigned from scratch after a few test prints. The blocks on the edges didn't quite close around my phone with it aligned on the eyepiece. Also, it couldn't handle phones like samsungs where the camera was in the middle.…
EDIT - Read full description below as some parts have changed. Please join the discord if you have questions as I may not see them here in a timely manner! - https://discord.gg/QdPa9ed6Jq Building of the success of the DBS114 , I now…
Make a statement at your next convention with this Bahtinov Focusing Mask, 8 Inch Telescope, Astrophotography Focus Aid Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File -…
MeLE Quieter3C mini PC Synta finder scope mount for astrophotography. I made this to mount my mini PC on the 80mm refractor OTA. Supports are required for the overhanging section. The design has holes for two M3 screws. I have used M3x8…
Print approx. €1.42–€1.74 excl. taxPreliminary estimate for PETGSource material: PET
***Listing updated to AllskyGo [Gen2] from October 2026 (Gen1 files remain in .Zip)*** 🌌Build your own Portable Allsky Timelapse Camera Inspired by the Thomas Jacquin concept, Allsky Go is the latest innovation in all-sky camera…
Prusa Referral Program - Time to upgrade your Printer? Use the following @ChrisE referral links to claim your free PETG Spool with the purchase of any Core1+ Gen2 / INDX / L+ / XL+ printer from the Prusa3D Store. Prusa account required.…
![Astrophotography harvester for Pentax SMC DA 18-135mm f/3.5-5.6 ED AL [IF] DC WR](https://media.printables.com/media/prints/1116201/images/8431782_befdcc04-f9f2-4a85-bdd8-38d52b944702_41af4cad-e170-4f1c-aa6a-d68827a15950/p18-135-01.jpg)
