Counting matching models…
Most XT30 housings on Printables are designed for bulky RC/drone battery leads, typically using 14–16 AWG silicone wire for relatively high-current RC/drone applications. I needed a connector housing for a much thinner cable — an aquarium…
I created my own svg file to make this 3D logo using Adobe Illustrator. I made this logo for my nieces who are studying at UGA in the city of Athens, Georgia, US. This is one STL file. Colors to use are: black, white and red. Add a gcode…
This is a jig that can be used when soldering round SMD mounted WS2812 LED using 24 AWG Magnet Enamel Wire I created this jig to assist me in soldering magnet wire to pre-populated WS2812 LED assemblies. The jig will hold the LED in the…
I noticed that the XT60 housing designs online mostly take 22-16AWG wires. I like to push my XT60s to their limit so this model is able to house to 12 AWG wires (4.5mm OD). The two parts are held together with an M3 screw and either a M3…
I made this to attach a 14AWG wire to a rope for my EFHW antenna. You don't need to use all four holes to get enough tension to hole the wire, I used 2. Simply attach a rope/paracord through the larger hole and you're all set to hoist…
I like the design of the WAGO 221 DIN rail holder and its very practical. However, I needed a version for the bigger Wagos (Which can handle 2,5mm² cables) AWG 20-10. Here it is :)
6S balance clip to prevent balance connector to move. it holds firmly attached to the lipo battery. Easy to print in TPU. Infill dont really matter the object is completly full because it mostly only perimeters. Post your makes! 4S…
So I created a roll consisting of two halves (which differ from each other) and glued them together. With a cordless drill and some helping parts I could wind up the 10 meters of AWG 26 cable. A ØM8 screw and nut with washer serve as…
Exact replica of Sonic the Hedgehog. He will hold your sticks with his stick holes. Show off how superior you are with this table piece by letting others know that you are a man/woman of culture with truly refined tastes. Instructions The…
A reasonably accurate rendition of a lever style wire connector I recently bought. I needed a 1:1 proxy of one of these for designing a mount of sorts for them but couldn't find any out there. I've included the Freecad file as well if…
Cleveland Browns Dawg Pound plaque designed to fit on a 220 x 200mm bed (Ender 3). The “trinkets” are designed to be printed in the correct color and then inserted into the base. I HIGHLY recommend you print the “Fit Test” base and…
Designed to work with Striveday™ 20 AWG wire kit (https://www.amazon.com/gp/product/B01LH1FV0Y/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1) Feed the wire through the hole and place the spool in the corresponding slot. The spool holder…
Dispenser for silicone hook up wire, similar https://www.amazon.co.uk/gp/product/B08R9WLLSZ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 the spools in this set are 55mm diameter x 21mm deep, Holds up to 6 spools. Each spool has a clip…
Gix as depicted in the Brother's War set. I made a variation that has the Phyrexian Symbol like early depictions.
Cable clips, for clean wiring of the Gaggiuino Mod. Suitable for 18AWG high-voltage cabling as well as 22AWG low-voltage cabling. Should be printed from heat-resistant material. At least PETG, better ABS.
4S balance clip to prevent balance connector to move. it holds firmly attached to the lipo battery. Easy to print in TPU. Infill dont really matter the object is completly full because it mostly only perimeters. Post your makes! 6S…
Junction Box for 5 AWG Wire Splicing Connector Overall dimension 50x30x21.5mm Easy cable assembly Easy to print, optimized filament usage Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx
I created a simple adapter for the Parkside PHKSA 20-Li C4 AKU circular saw for use with a MAKITA guide rail. I am using the C4 generation of the saw, but the base will probably be the same for older versions. I recommend printing on a…
I don't know why WotC decided to make Yawgmoth a goth twink when he was still human If you want to help me keep making free models or want to tell me what I should make next please check out my [Patreon](https://www.patreon.com/stormcrow13)
Cable spool for 1.5mm² / 16 AWG wire. Designed outer diameter of the wire is 3mm / 3/32 inch Prints without support Screws together with the printed threads. It's tight. Wire can be poked through to the middle before spooling for…
Small wire holders - 20 mm wide by 5 mm thick 100% infill 0.6 nozzle 0.30 layer
The model is designed to hold an arbitrary number of lever wire connectors. The top bar snaps into place. Included Fusion 360 f3d file can be used to change the number of connectors (Modify>Change Parameters>n_connectors). You can also…
Balance plug holder for 6s lipos Category: R/C Vehicles
Organize your wiring with this modular, parametric set of wire holders for 00 to 10 AWG wire. Designed with clean mounting in mind, the provided stls accommodate: 00 gauge holders (M5 screws, 20mm outer, 5mm internal) 0–6 gauge holders…
Cawgnito from Palworld I recommend using 0.08mm layer height and tree supports. Enjoy!
There are 2 sized, 12awg and 14awg I tested these using 12awg Deans Wet noodle, 12awg Hobbywing, 14awg Ruddog wire. Hobbywing being the thickest.
Vertical and right-angled saw cuts are an important factor for success, ensuring that even beginners can complete simple woodworking projects. This simple saw guide helps with this. It is suitable for beginners because the saw blade is…
K'rryk has been sitting around unreleased too long. Mini of K'rryk, Son of Yawgmoth If you want to help me keep making free models or to tell me what I should make next please check out my Patreon Category: Games
So I created a roll consisting of two halves (which differ from each other) and glued them together. With a cordless drill and some helping parts I could wind up the 5 meters of AWG 26 silicon insulated cable. A ØM8 screw and nut with…
Nato Strap Adapters for the Casio G-Shock AWG-M100. It has a 16mm lug and is made for 22mm wide straps
This is the wire retainer for Diatone Roma F5 FPV Quadcopter. This holds the 12Ga battery leads to the aluminum standoff. This may fit other Diatone FPV Quads. Leave a commit if anyone needs the 14Ga version.…
It straightens wire better than I could by hand. Uses M5x20mm bolts and M5 nuts. I highly suggest threading the wire through the rollers as you assemble the unit. I don't think you'll be able to do it after.
I needed a very small cable clamp. I can't find a suitable here on printables so I created this model. This clamp is suitable for 2x0.25mm² or AWG 24 cables. I printed it in ABS for more rigidity.
Boost your engraving workflow with the WeCreat Lumos Golf Ball Laser Jig by Song Dawg Designs — a precision-engineered jig built to let you engrave six golf balls at one time with perfect repeatability and alignment. Designed specifically…
Wanted to combine my 30 AWG and 36 AWG Bare Copper Wire onto one spool. So I made this spool. Works like a champ. Could have sanded and cleaned up the left over supports better, but hey, its only a spool to hold my wire.. and was happy…
This design is simply rolled over the wire, so they can be added or removed at any time without desoldering or pulling wires through. The F3D file is included to modify/create any length. As you make them longer (printed upright), the…
This is a modified wago mount for the mercury zero g hydra bed heater terminals that mounts on the rear arm. this is sized up to accomodate the larger 20-10 AWG WAGO 221 blocks, this mount also locks in the blocks so that they cant move.…
Bring a touch of classical artistry to your collection with this highly detailed sculpt of Moses. Captured in a dynamic pose holding the Ten Commandments and his staff, this model is designed to showcase the beauty of high-end filaments.…
Two printed parts, five bearings (MR128ZZ (12mm outer, 8mm inner, 3.5mm height)), five M3x10mm screws and five nuts. Operation: You have to twist and turn the straightener as you drag it along the desired length of wire. I think I will…
Ich habe hier einen Stecker halter konstruiert der einen JST SM2,54 Stecker am Nema17 festhält damit dieser beim Bewegen des Motors nicht die Kabel beschädigt. Dies war eine der ersten Ursachen für den kleinen Umbau. Später erwies es sich…
Modified original model from qwerty to hold up to 30m of AWG 24 wire. The Spool has now an outside diamenter of 70mm.
Threadboard AWG Spool Holder – Ordnung für Drahtspulen Der Threadboard AWG Spool Holder ist die ideale Lösung für alle, die AWG-Drahtspulen ordentlich und griffbereit aufbewahren möchten. Er ist speziell für die Verwendung mit…
For 36 AWG wire — approximately 75 meters per spool (also suitable for thicker wires (30–35 AWG) with proportionally reduced length) Each spool consists of two parts that press-fit together without glue. There is no built-in alignment…
Rough External Model for a TEC1-12706 Peltier Plate with dimensions 40 mm x 40 mm x 3.9 mm and a 16 AWG wire. Ceramic Plate Thickness is 1 mm on either side. Groove Dia is 1.9 mm. Built the model to get a better picture on a project I'm…
These connectors keep the two wires together for the BougeRV 20 Feet 10AWG Solar Extension Cable. So odd they are made as separate wires. These are easy to Print. I think I am using about one per foot. Print in FLEX/TPU otherwise this…
The model is a bit broken, good luck trying to print it.
Unleash some serious cool vibes with this stylish canine bust 3D print that's ready to become the ultimate conversation starter on any desk or shelf! This incredibly detailed STL model features a sleek dog head wearing trendy sunglasses,…
3x5 Gridfinity bin for Deutsch connector 20-26AWG crimp tool. This is a no-name crimp tool that I've had for a while. It looks like the one I bought was sold on Amazon by Gizwiz but it might fit similar models. This was a quick and dirty…
This model comes with an opening on its side and bottom, so you can leave the USB-C cable attached to the cutter when putting it on the wall. You can use a cable holder then to keep the other USB-C end attached to HSW. Print the holder as…
A wire thimble designed for the end of an end-fed half wave long wire antenna and associated counterpoise. It is sized to accept flexible 22AWG wire. The area along the curve is open for easy manipulation and feeding of the wire. It is…
3x5 Gridfinity bin for iCrimp Deutsch connector 14-18AWG crimp tool. This was a quick and dirty design. The crimpers have little plastic loops on the bottom of the handle which I cut off to make them fit. There is a little shelf at the…
This is a mini spool to store thin 30AWG wire. Holds about 5 meters. Just print the two parts and carefully snap them together. This 3MF was created with the Elegoo Centauri Carbon 2 profile in Elegoo Slicer (OrcaSlicer). If you're using…
Hi, I bought this Awgem Soldering Iron from Temu and designed Gridfinity container for it. Dimensions: 5x1x4
A simple desk mounted awg cable spool holder. Warning the Photo don't show the default values. You might need too adjust the values in Freecad. If you want to use M10 screws for desk-mounting, instead of press-fit, you can 3d Print them.…
This basket ball keyring can be fully printed in pla. Was created to support the local Bulldogs Basketball Team. The elements are separate on in the STEP file so coloring the model to your liking is as easy as selecting a color for each…
Wire Buds Printed in PETG and tested with 18 and 22 awg wire. Found myself with too many ground and Positive wires hanging around prior to attaching them together so made this totally unnecessary gizmo to keep them neat and tidy until I'm…
Perfect for the bulldog spirit wear! Go Dawgs! Category: 3D Printing
This is not an ordinary dog feeder It is a weapon built for endurance, an instrument of control over hunger itself. The weak offer fragile devices that falter under pressure - feeders so frail they split open at the first scratch of a…
Holds tennis ball for attaching to a iphone 4 currently, 9.5mm gap. attached rsdoc file for designspark mechanical if chanegs required. it was a 5 minute design just to see what the dogs thought. they like it. Category: Camera
This ornament is inspired by the classic Georgia Bulldogs mascot design.
20mm sheet metal hole, 6.5mm 8AWG Ancor marine cable, Used to go through a firewall hole in Nissan Leaf ZE1. Shall also work for ZE0.
Boost your engraving workflow with the WeCreat Lumos Golf Ball Laser Jig by Song Dawg Designs — a precision-engineered jig built to let you engrave six golf balls at one time with perfect repeatability and alignment. Designed specifically…
If you run an xTool F1 and you’re tired of wasting time on alignment and one-at-a-time engraving, this set is built to speed up your workflow. The xTool F1 Core 4 Jig Set covers the most common day-to-day jobs for laser enthusiasts—so you…
Bring a touch of classical artistry to your collection with this highly detailed sculpt of Moses. Captured in a dynamic pose holding the Ten Commandments and his staff, this model is designed to showcase the beauty of high-end filaments.…
Clawgrip. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
Gridfinity Kynar 30awg Bodge Wire Spool Holder (1x1 base) - Parametric. 6x2mm magnet recesses in the bottom. Printed in PLA with 4 perimeters, supports touching buildplate only, and adaptive cubic 15% infill.
This is a 3D Printable In-Line Fuse. It works by you inserting two wires 14-16 Gauge that have all-metal female spade connectors on the ends that will go into the plastic fuse housing. You can then use a soldering iron set to a high…
Balance plug holder for 6S Lipo or Li-Ion batteries (Standard JST XH connector) Available in Two Sizes: Check the markings on your battery wire to choose the correct size. 10 AWG – Typically used with larger 6S LiPo batteries 12 AWG –…
Have you ever wondered what size wire you are looking at (but likely shouldn't be messing with?) Say no more! This handy little gauge card gives you a quick reference to check wire gauge. With 2 options for checking - insert the wire in a…
Had some silicone 30awg wire left in 1-3 meter rolls. I think it could hold around 5 meters or so. There isn't any print settings ;) just use some super glue to hold two parts in place
Full Image Catalog The complete gallery of my works can be found at www.marjers.com You can search by the file’s reference number or simply click the preview image to open it directly. Print setup Infill: 100% (solid) Layer height: 0.08…
This ist for WAGO 221 -41* with AWG 20-10 these are wider.. 1x for 3 1x for 5
Edited to fit DIY Wire from aliexpress: https://www.aliexpress.com/item/1005005450270866.html Please note! - 3mf file has cutout block in base! Printing base from STL will not fit spool! - wireholder needs to be printed twice, I…
Designed to fit cable below: Cable spools are about 20mmX50mm. https://www.amazon.com/dp/B07G2JWYDW?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
If you run an xTool F1 and you’re tired of wasting time on alignment and one-at-a-time engraving, this set is built to speed up your workflow. The xTool F1 Core 4 Jig Set covers the most common day-to-day jobs for laser enthusiasts—so you…
This is a strain relief/holder designed for two pairs of 10 gauge mc4 solar cable into a Victron mppt 75/10 controller. It is designed to stand the cables off and feed the Victron controller at similar standoff height inside of an…
Meet PawGuard, a cute dog-shaped door stopper designed to keep your door open in a fun and practical way. The dog is built directly into a strong wedge base, making the model more durable and stable for daily use. Its low-poly style gives…
I had a few feet of loose 22 gague wire in my drawer that I wanted “not-so-loose”. Designed to organize loose wire. Can be easily scaled/remixed to accommodate larger gague wire. Print Settings: .4 mm nozzle .2 mm layer height Cubic…
Thanks to the excellent work here: https://www.printables.com/model/132124-compact-low-profile-5v-usb-type-a-connector This model has been modified to accommodate 14 AWG copper wire, since this was readily available in my situation.
A very convenient add-on for the awg30 wire frequently used for PCB rework and various bodges. Designed to print quickly. Mine is in recycled PETG. I heated the end tap with the hole with a heat gun and bent a little, so it's slightly…
A cable clip that works well with 14 AWG wires (3.5mm OD). Used it to organize cables on my bench such as multi-meter leads, power supply cables, etc.
simple shell for xt60 connectors. Use super glue to assemble.
Angled holder for FG-100 DDS. You could potentially use it for bigger stuff if you dont use the rib, or if you make the rib yourself bigger. Print with PETG 0.2 20% infill.
I wanted to keep the wiring on my solar install tidy. I made a 90 degree guide for a pair of cables (negative and positive) with a 6 mm outer diameter. The clips use simple nylon zip ties to constrain the cables to the guide, and small…
I wanted to keep the wiring on my solar install tidy. I made a cable clip for a pair of cables (negative and positive) with a 6 mm outer diameter. The clips use simple nylon zip ties to constrain the cables to the guide, and a small wood…
Simple cable spool for e.g. 30 awg or similar cables, solder etc. It consists of 2 parts that are screwed together. The inside hole is to fix one end of the cable so it doesn't slip around, the outside holes are for your cable so it…
