Counting matching models…
2D artwork of Thumper from Bambi Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the…
Bambi Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the tab so that…
Remix of newman13f's model with a wider hole which fits stock 54mm portafilter of Sage/ Breville Bambino/ Bambino Plus. newman13f does not seem to have a printables account though.
I was thrilled by Reven's Portafilter holder for Baratza Encore but I found my portafilter was too small, tweaked the design of the holder piece to fit it. Go get the other parts from their project!
Flower from Bambi Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of the…
Cute low poly bambi, sniffing curiously upwards. I recommend supports in the belly area and between the legs (as it is integrated in the gcode file). From the belly up you can print without supports.
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
4 different variants of the 54mm Tamper Station for the Sage / Breville Bambino (Plus) available. The WDT-Tool holder fits with the following product, which is available from various manufacturers on Amazon: https://amzn.eu/d/81th8Xx
I could not find a dosing funnel for my Breville Bambino Plus 54mm Portafilter (PF) which fits into the PF holder of my Smart Grinder Pro. The ones I have tried are too tall so I had to tilt the PF forward a little just so it goes through…
Bambi and a butterfly Tip: The tab on the bottom is designed for using something such as Sticky Tack (a reusable soft adhesive putty), to keep your artwork secure in even the strongest gale force winds :D I've also made the positioning of…
Simple Portafilter Holder for stock and 2nd party Open Portafilter for Sage/Breville Bambino. Printed on a Prusa Mini+, 0.6mm Nozzle with Extrudr XPETG Anthracite
Low profile funnel to direct water from steam wand into the drip tray, designed for Breville/Sage Bambino Plus Espresso Machine (BES500) Remix of original by AlmondTofu:…
Just a Simple Funnel for Sage Machines. I used Filler and and Spray paint on PET-G to smothen it. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: 200 Infill: 35 Filament: PolyMaker PETG…
Maracas per bambini. Ho creato questo strumento per mia figlia con disabilità. Essendo di un diametro giusto per le dimensioni della sua mano e con un manico più lungo di quelle in commercio, riesce a farle suonare. Stampata in più…
Breville includes a so-called “razor” tool with the Bambino Plus for leveling the amount of coffee in the portafilter. Being cheapskates, they leave it out of the smaller Bambino model even though it's a few cents of metal material. This…
The metal grate on the Breville Bambino Plus drip tray does not sit tightly on its plastic reservoir, so it rattles around while the coffee machine is running. I've designed some small shims to attach to the plastic reservoir that keep…
This is a 54mm coffee funnel that allows you to fill your sieve tray without getting everything dirty. Please check the dimensions depicted on the attached pictures, since I have got the feeling the Sage's 54mm may not fit all…
One of the downsides of how small the Breville (Sage) Bambino is the fact that a normal sized scale won't fit on the drip tray without slipping around. I designed this plate around the Timemore Black Mirror Scale, but it worked with a few…
Gioco Musicale per bambini. Stampare n° 1 manico e n° 2 parti laterali. Ci sono 2 versioni di manico, una per i bambini sotto i 3 anni e uno normale. La versione per bambini impedisce di spingere il manico in profondità in bocca e i fori…
English: This is a custom-designed Bambi cookie cutter, standing at 10 cm tall (scalable to your preference). It consists of two separate parts: one for cutting the shape of the cookie, and the other for engraving fine details on the…
I designed this Espresso Packing Cup for our new Breville Bambino Plus 54mm Portafilter. Works great and supports the portafilter while packing the espresso. I have included SolidWorks, Step and STL files. Printed with carbon fiber /…
Funnel to help transfer ground coffee into your espresso machine portafilter with less mess. This uses the design at https://www.printables.com/model/164943-espresso-funnel-parametric , modified to fit my Breville Bambino's portafilter,…
I remixed the existing model to attach the sides to the main body for easier use and less assembly. You need to print the grounds tray from the original model. I recommend also printing a funnel, although I haven't yet. I'm also not happy…
Prints without support. 20% infill. made of pla.
Sage/Breville Bambino Plus top tray to dry anything on top. Has grooves at the bottom to interlock with the machine's top surface and stay in place. Recommended to print in TPU. Control drying surface by adjusting infill pattern/density.
This clamp prevents rattle from the drip-tray on the Sage/Breville Bambino plus. Easy to remove for cleaning the drip-tray. I printed this in PLA
We recently got the Breville Bambino Plus and, after seeing there weren't any mounts for this model, I created this little work-of-art. This has a wall mount spot for the 54mm Portafilter, the 54mm Tamper, the 4 stainless steel filters (2…
Fits tight and snug with Standard Cura settings (layer height 0.2 WALLS: 0.8mm thickness, 2 wall count - TOP/BOTTOM: 0.8mm thickness, 4 layers). In case it's ever useful, I've also attached a 5x5mm grid of the water tank used to sketch…
for bambino plus. scratch protection. made of tpu. fits ok.
This is a keygaurd for TouchChat60basic in the commonly purchased Bam Bin case for an iPad 8. The keyguard is set with the menu button open and the speech display / message window set to 2 lines (no icons). There is no mounting,…
Emporte-pièce en forme de “Bambi” 20 cm de haut
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
What This is a cup riser / elevated drip tray for the Breville Bambino Plus espresso machine. It brings small cups a bit closer to the portafilter in order to (1) reduce splashing within the cup due to a long drip distance, and (2)…
I wanted a way to better organize a few accessories on my Breville Bambino espresso machine. This tray is perfectly sized to the top area (with 1mm of wiggle room to allow for production model variation). It is designed to hold two 53mm…
I recommend changing the face offsets on the model according to the precision of your machine for the best fit. The offsets used in the model are according to my inaccurate Anycubic Vyper, but for my more-dialed-in Ender 5, I would…
After trying a few things to reduce or eliminate vibrations, I felt the best way would be to slightly lift the drip tray from the surface it was sitting on. This both creates a tighter fit against the main unit so the drip tray itself has…
Breville Sage Bambino Cup Holder for bottomless portafilter Raises Cup to be closer to bottomless portafilter to avoid mess if it sprays. Also print guard and mirror it for other side to lock it in place on drip tray Also have cup holder…
The model is pretty simple: it is a Gridfinity bin with the cutout for the portafilter that comes with the Breville Bambino Plus (and probably the non plus as well). There are three models available: 8u full - has the cutout to the…
Replaces the standard Breville Bambino drip tray with a new one that can also hold a scale for your espresso making. Supports required - they easily rip out at the end to leave a nice skirt around the edge of the platform. The machine…
A compact platform designed to hold a coffee scale while using the Sage/Breville Bambino Plus, created because most scales don’t sit securely on the stock drip tray. The model is shown in the photos with a Bookoo Themis Ultra, but it…
When you use bottomless portafilters and dial in for a new coffee, it is expected that it is spraying. It is not caused by a single reason, and also the Breville bambino cannot adjust its pressure, sometimes you have to live with it. As…
Clip di collegamento ruota per macchina elettrica bambini, altezza totale 25mm. Post-Printing Category: DIY
Markers are held at a 45° angle and stick out ~12cm away from the skadis board. The hooks are slightly thinner than other 3d printed hooks to allow multiple holders to fit above each other, so I recommend at least 3 walls on the hooks to…
Sage Bambino Tamping station 54 mm with 3 puck screen, i needed space for puck screens.
This funnel is used to stop the Breville Bambino Plus auto-purge feature from spraying milk over the drip tray. It is printed upside-down and with 15% infill and no supports. For fun, it is also shaped like a mini coffee mug!
For some unknown reason the Sage Bambino Plus Espresso machine seems to be delivered without rubber feet under the drip tray in spite of having a space for the placement of rubber feet. In a way I can understand why - there are rubber…
Use threaded inserts and some leftover packing foam to securely attach your Breville Bambino Plus to a surface for easy access. Use files to laser cut from plywood.
Remix from the original model with a few modifications
Possibly the worst designed product bottle I've ever encountered, L'Oreal's BAMBI EYE false lash mascara tends to fall over if you as much as look in its general direction. This little print solves that issue.
Dichtring für die Bambini Trinkflasche. Die originalen fallen leicht raus und sind schnell mal verschwunden. Siehe Amazon https://amzn.eu/d/0X8z1yD Print: Material: TPU 95A HF Infill: 100% Layer: 0.16 Nozzle: 0.4
sagoma bambino per una pedina adatta ad un gioco da tavolo.
This is a riser for the Bambino model. This will not require support if the threshold is 24%. I have printed without any support using PLA and it printed fine. You install it between the metal drip tray and the lower drawer. There is a…
I broke the cleaning tool for the steam wand on my sage bambino plus, so I decided to make a new one. Printed mine in PLA but would recommend to print it in PETG. I have uploaded g-codes for both PLA and PETG with 100% infill to make it…
ORIGINAL DESCRIPTION FROM Zed Barker-Flower A compact platform designed to hold a coffee scale while using the Sage/Breville Bambino Plus, created because most scales don’t sit securely on the stock drip tray. The model is shown in the…
Nearly half of all our shade toggles broke within two months after purchasing our new Airstream Bambi. As much as we love our Bambi, many of the parts are subpar including the shade toggles. (The Caravel with the same floor plan comes…
Bite Me Bambi - Orange County SKA band 3d logo with built in layer/colour changes. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks.
Bite Me Bambi - Orange County ska band Rose logo. With colour changes at applicable layers for a multicolour print. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks. NOTE: The 4 little…
I have created these feet to fit underneath the Tutti Bambini Modena Cot Bed. I purchased the optional under-cot storage drawer to slide underneath and found that, because the cot bed is on carpet, the drawer would not fit underneath. To…
Bambino + tray for tamper and wand tool
Sage Bambino tray for tamper and wand tool. keeps them safe!
English: This is a custom-designed Bambi cookie cutter, standing at 10 cm tall (scalable to your preference). It consists of two separate parts: one for cutting the shape of the cookie, and the other for engraving fine details on the…
Markers are held at a 45° angle and stick out ~12cm away from the skadis board. The hooks are slightly thinner than other 3d printed hooks to allow multiple holders to fit above each other, so I recommend at least 3 walls on the hooks to…
This model is compatible with the lego system.
What This is a cup riser / elevated drip tray for the Breville Bambino Plus espresso machine. It brings small cups a bit closer to the portafilter in order to (1) reduce splashing within the cup due to a long drip distance, and (2)…
A compact platform designed to hold a coffee scale while using the Sage/Breville Bambino Plus, created because most scales don’t sit securely on the stock drip tray. The model is shown in the photos with a Bookoo Themis Ultra, but it…
For some unknown reason the Sage Bambino Plus Espresso machine seems to be delivered without rubber feet under the drip tray in spite of having a space for the placement of rubber feet. In a way I can understand why - there are rubber…
This is a portafilter funnel for a Breville Bambino Espresso Maker. This might fit other Breville espresso maker models but I don't have any to test. I made a few iterations of this and this was the latest version that fits tightly to the…
This model is compatible with the lego system.
NOTE UPDATES MODEL 2.0 After testing for a bit I've made some improvements to the original model, the bottom lugs were not quite longe enough to truly lock the stand in place and there was a slight "wobble" when knocked. to alleviate this…
Coaster for drinks with Bambi design. 95mm square, 1.8mm thick. You will need to add a layer change to get the two colours when you slice it. Prints fine in PLA with 0.4mm nozzle, 0.2mm height. I used 15% infill.
Thank you for supporting me! This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a…
Character Disney Fan Art Bambi and Simba Statue Collector Category: Toys & Games
