1,155 models
Simply print with the Bambulab default settings 0.2 in PLA. For coils 55 mm x 64 mm and 50 mm x 64 mm Printing time approx. 1h49m Use 6 x used AA batteries The screwing revised . Added empty containers to fill with e.g. plaster.
Print approx. €4.59–€5.60 excl. taxPreliminary estimate for one variant
Hello, Today I have for you the Bambulab P2S original tool box . It is absolutely great for storing the original tools that you get with the P2S. It fits absolutely great and the writing just clicks on, no glue needed. I used PLA/PETG as…
Print approx. €5.90–€7.21 excl. taxPreliminary estimate for one variant
The standard buffer for AMS on BambuLab printers has a wider hole for the PTFE tube, but the 4 inputs hub for multi-AMS has a 10mm wide hole. So the quickrelease buttons I found did not fit the 4 inputs hub so I designed a proper one.…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Please consider posting a make! Thank you! This is an adapter you can slide into a BambuLab Spool to make it compatible with FormFutura's ReFill spoolless filaments (750 grams). They have there own master spool but I don't want to make…
Print approx. €2.74–€3.35 excl. taxPreliminary estimate for one variant
Dobré ráno, Vítejte na mém profilu, plném modelů a miniatur :-) Mám pro vás velmi šikovnou škrabku Bambulab na postel. Docela efektivně odděluje produkty od skla nebo PEI textur. Tahle verze je pripravena na barevny tisk, ale protoze me…
Print approx. €2.04–€2.50 excl. taxPreliminary estimate for one variant
There are several reports that AMS units, that arrived to users from 08.2023 had a slightly changed configuration of the feeding funnel. The AMS Funnel Buttons on the new units are thicker. Please check the thickness of AMS Funnel Buttons…
Update 16.02.2025 : The newer X1C/P1S have minimally smaller filter niches (very tight tolerances) - I have now adjusted the size. Now fits this version the old AND newer X1C/P1S perfectly! 👌😊 It was time to replace my activated carbon…
Important! This is a remix version of Perfect Fit Bambu Lab/Bambulab AMS Feeder Button Cover Protector for the new revision of AMS feeding funnel . There are several reports that such AMS units arrived to users from 08.2023 . Please check…
UPDATE Sep 24 2023 Before you download and print this, I made a new version with VENT Holes, check it out > DK Riser And another version of a low profile riser >> DK Riser Low Profile A Remix of Daniel's Bambu Labs Carbon X1 Top Glass…
update v2.1: See https://www.printables.com/model/380870-customizable-honeycomb-storage-wall-openscad/comments/807006 for more info about the fix. I also configured the default size to be a 10 x 10 grid that fits a Bambulabs printer.…
For each printer you have a PETG model file and a PLA model file. Please make sure to keep all the gcode changes inside the files, in order to apply the temperature changes All my BambuLab Temperature Tower models: BambuLab P1P, P1S, X1C,…
Desiccant box for AMS. The slim version support 44mm X 44mm X 13mm hygrometer. ----------- Here is the explanation to address some comments regarding the hole orientation. The reason I chose horizontal orientation, which results in many…
Remix of the box to have an indent that makes it slide in place even with installed AMS reinforcement clips. For me no resizing was necessary. AMS reinforcement clips The AMS reinforcement clips were introduced by BambuLab as a quick…
V2 available here: https://makerworld.com/de/models/1577703-bambulab-anti-vibration-feet-v2-p1p-x1c-p1s-tpu#profileId-1660067 These are anti-vibration feet for the Bambu Lab X1/P1P, inspired by the original ones that can be bought in the…
This is a stand for the round common Hygrometers. I designed it specifically to fit into the middle of the Bambulab AMS (tested with new version, bought in 2023). Of course it can also stand alone anywhere else. Secure fit, Hygrometer…
Printed this with 0 infill but I recomend the use of some. Support is needed for the BambuLab logo. 2023-01-12 updated so the logo is embossed in to the bucket so no support should be needed
Remix to add a handle to the lid. Had to shorten the box to accommodate the lid so you will lose some volume. Includes versions for the rectangular and round hygrometer. Link for rectangular hygrometer:…
I redesigned them mostly from scratch to make them slimmer and fit in th AMS with the new Hydra Pro mod. They're about half the size and fit in the Hydra Pro AMS like a glove. The convenient knurled tab on the back make it a breeze to…
This is a holder for your HotEnds / Nozzle and spare Extruder, as well as some necessary screws/Mounts. The last of the top row holders is for a fully assembled Hotend/Nozzle with fan & silicone sock. Update 12/23/22: Added new version…
UPDATE: Version 2.1 of this spool adapter has been uploaded. Slight correction to V2 on the retention tabs. This is a Bambu Lab AMS adapted for Polymaker cardboard spools. There is one registration pin to avoid slippage. I honestly do not…
I remade the model in fusion and made it so to allow me to add the ledstrip that i bought from aliexpress , I hooked the ledstrip up to a custom PCB which can controll the RGBCT from homeassistant and will clone the Bambulab Ledstate from…
Update: Since some new printers from BambuLab have a modified cable chain, the originally designed clip did not fit anymore. There are two variants, please check which one you need, otherwise the clip will not fit. The difference is in…
I liked the original bracket, but it didn't solve the problem that the PTFE-Tube rises upwards and collides with the glasstop (ok, not so easy as before) or the LED-Frame that I installed…
My AMS roller supports cracked. There's a hot fix here from BambuLabs which works great but it means the existing little boxes I printed don't fit anymore. So I made it back from scratch with groove to fit. I also added a little grabber…
Extension for the top of the poop chute door to help with filament not getting stuck on the top of the door. it just pushes on top of the door , flat side to the front. I was always having problems with the long oozed strand of filament…
A poop/purge basket designed for Bambu Lab A1 Mini. It was designed to be light weight and friction mounted to the purge wiper. This Mini version is 40mm tall. This remix changes : Included BambuLab logo added fill-indicator holes
My AMS started to fail when loading/unloading filament, i discovered that this little piece broke, so i asked my colleague to model it. I just installed it in my AMS and works just fine :) I hope i could help you if you have the same…
Filament purge collector - with 2 holes to install 6x2 magnets compatible with P1P, P1S and X1 Carbon
Bambu Lab AMS Spool Adapter for Sunlu 250g filament 27/11/2023: I added some minor changes to reduce the bouncing when winding/rewinding a nearly empty spool. Spool 195mm v12 -------------- I kinda reinvented the wheel. I was surprised I…
I had so much silica gel left for dehumidifying and drew myself a little box. Can be printed completely without support. In the picture you can see the 3 versions from the development. The last one can be seen on the far left. The Fusion…
Silica Dry Box for BambuLab AMS with rectangular hygrometer and vertical slots. Updated 10-20: Added indent to back wall for AMS roller fix from 'dietrich'. Also added the original lid for convenience. Updated 10-18: Updated with vents…
Spulenadapter für Jayo & Sunlu Pappspulen, um diese im AMS von Bambulab zu nutzen. Dieser Adapter läuft in meinem AMS bereits seit mehreren Spulen problemlos und lässt sich in etwa 15 Minuten pro Seite (inklusive Kalibrierung) drucken.…
After hours of searching, I was not happy with form or function of other available “poop chute” models. The Bambulab printers are beautiful, and I did not want to attach something to it that did not look like it belonged. So, I made the…
EDIT ------------------------------------------------------- 2023.08.10. On request from Chris Ondrovic added frame parts without side ventilation (holes only on front side) 2023.03.26. Added STL for Alu profiles caps. Printed from…
Y-splitter to make it easier to print with or without the AMS. Designed for standard profile PA-CF or PAHT-CF, 0.3mm layer height, 0.6-0.8mm nozzle. The fittings just threads right in. Uses 3x PC4-M6 which can be ordered of Amazon of Ebay…
Tired to print almost half a kilo of plastic for a box? This is the answer! :) At the moment this IS the most lightweight (in both weight and printing time) poop chute I am aware about. The walls are thin - 1.2mm in order to be perfectly…
WHY? I love my BambuLab X1 Carbon, yet it makes a hell of a noise. I do not have a basement or garage to put it in, so it needs to quiet down. Slowing down the chamber fan in the print profile has a huge effect, but I needed more. So, I…
This is a refillable Activated Charcoal Filter Box for the BambuLab X1. The filter medium should be replaced every 50-100h or as soon as you start smelling your ABS prints again. It saves you money and reduces waste! Best used with…
this is a low profile LED COB strip mod for the Bambulab X1C and X1 printers. This prints in four pieces and is securely held together with 4ea M3x16 screws. I recommend this kit.…
Work in progress until the Beta test. The day of receipt of my p1p. Travail en cours jusqu'au test bêta. Le jour de réception de mon p1p
Bambulab AMS spool adapter for cardboard Elegoo Filament spools. Print with outside face on the bed , 20% infill
It's BambuLab Poop Bucket. It need three 6x3 magnets.
It is designed for the Bambulab plates but I guess it will work for other plates as well… I added the missing "coupler" to couple the front and back. I glued the parts together. and mounted them to the printer with double sided tape. The…
BambuLab AMS 2 row Vase Mode desiccant containers. It addresses all my pain points from the many other AMS dessicant containers that I have printed. You can fit 6 of these confortably in the AMS, 5 if you choose to replace one of them…
When your model is closing to the corners of the bed, the magnetic force is too weak to hold the magnetic sheet down against the warping. If the model has good adhesion, the sheet just curls up. In my case, I printed the model (in PETG)…
I introduce the AMS spool weight holder, it is an easy to print design. It is my first creation using Fusion 360. No supports needed.
--– Whats new! --- The 3.0 Update is all about usability and efficiency . This new filtration system has been completely redesigned to: Allow easy assembly and disassembly Replace the filters without taking the whole system apart Include…
Bought a textured PEI build plate from AliExpress and wanted to get rid of the warning “Build plate marker not found”. So I just converted a screenshot of the textured PEI plate in the slicer to an STL and painted it a little. I uploaded…
Narrower remix of the original box to fit the AMS 2 Pro.
it's Bambulab P1P anti vibration feet adapter. Just print and adapt it.
This is a remix of the great design by DaveRig of his “garbage chute” but we all know it's a poop chute. Changes I made: made bin deeper to fit BambuLab X1C / P1P when sitting on a paver (1.75" higher) Added a kind of ramp inside the bin…
Wanted to make a helldivers cosplay for comic con, found this great model by ZerekMasters that looked perfect. However it had some problems like too many polygons and other misc. errors. Fixed the models up in OrcaSlicer and sliced them…
Catch that filament poop! This is a small, minimal poop basket remix in which I made only two simple changes: Magnet holes have been adapted for 6mm x 3mm magnets The BambuLabs logo has been embedded on the outside of the bin 3 versions…
This is a remix of SoftFever's middle dry box for AMS that works with the hygrometers that are available on Amazon in the US. The same top is used from the original project. Updated 10-20 Added indent to back wall for AMS roller fix from…
https://github.com/DRIgnazGortngschirl/bambulab-studio-orca-slicer-presets Welcome to the Bambu Studio / Orca Slicer Presets repository! This repository is dedicated to storing / collecting presets that have been meticulously crafted and…
I was looking for some cool waste box for my A1, but haven't found version that both looked cool and was compatible with extra supports needed when you use AMS on the top and used deflector instead of huge wall. Hence designed this little…
This is for mounting the bambulab (x1 or p1p) hotend to a creality machine like the ender 3 (v2) and similar. It allows the mounting of the Bambulab Hotend on a MK8 style carriage like most Creality printers and clones. While the…
Profile for Sainsmart TPU that I use mainly for fpv drones. My Bambulab P1P has hardened steel nozzle and gears and aux part cooling fan. Is usable on all Bambulab printers though. I've printed a lot of colors and models. Enjoy :)
Another silica box to fill the AMS, with this slim one you can put two more boxes on the front side spaces.
AVISO IMPORTANTE: VERSIÓN 2 DISPONIBLE AQUÍ: https://www.printables.com/model/845017-bambu-lab-p1p-super-mario-block-enclosure-mod-20-c --------------------- IMPORTANT ANNOUNCEMENT: VERSION 2 AVAILABLE HERE:…
Cut out the sock and heater from Said's model and pasted onto this version
Classic temp tower 3mf file is designed to work on the Bambu X1 C
Just a small test, how much I can achieve with this design. ;-) Infill: 5% Walls: 6 layers Magnets: 15x5 mm Noise reduction: about -10 dB (from ~68 dB to ~58 dB) in 50 cm distance measured by a mobile with app “Schallmessung”.
A lot of the purge buckets I found where too large or none magnetic so I created my own and added the bambulab logo. One is 90x90x50mm, one is 100x90x50mm and one is 150x100x70mm. I made it to take 10mm magnets that are at least 3mm thick.
I am currently using three types of print plates, so I made this plate organizer to have them ready to go. Each stand comes with five slots for the plates. It can also be used for the replacement stickers of the cold plate, but you might…
Heatsink was completely reworked, collets were remade as close to original as possible. Since provided model was fused into one solid, E3 Collet is rough estimation according to drawings/photos. CAD is accurate to provided technical…
Modeled in Fusion 360, face down, no need support. It has two “buttons” that will fit the left 2 holes at the back, so it stays in place. Angled up a little so you can look in from the top glass. The last firmware update allows you to use…
A glass riser for the Bambulab P1S/X1C 3D printer. Contrary to the other models available, this is a riser without vents. I use it because I had problems with my AMS unit loading an unloading. After the elevation, the PTFE tube no longer…
No need to explain, all is in the title. Based on Voron Stealthburner for Bambu Lab X1C/X1 Hotend by MrTelip Changelog : Update 12/11/2023 : - Too many versions ! attempt to simplify choice table - Fix airflow for “clone + std V6 nozzle”…
BambuLab Aufbewahrungbox für Zubehör. In diese Box passen fünf komplette Hotends, ein Klebstoff und weitere Kleinteile.
Hey everyone, I've been looking for the Y-splitter which: -Looks good -Works well -Can be attached to the frame -Get ride of the stock coupler -Is invisible from the front of the machine Well… I had to roll my sleeves up ! Here is my…
Quite sure this fits A1 and A1 mini as well. Was remodelled from a.m. stl-file on Makerworld. My prints were always a pain, no idea why, but I also liked the idea of something that comprehenses the cable completely (all around, instead…
Adapter for Hotend Bambulab. Print in ABS, ASA, ASA-CF, PC-CF, not in PLA or PETG. 3 possible choices. -The original Bambulal version with fixed nozzle. You must print the BBL-O version. -The AliExpress clone, with the tiny nozzles…
For a pre sliced version visit the makerworld version. Copy the following onto the end of regular link to find it - models/17484#profileId-16249 Screw on poop chute designed for P1P and P1S (unsure but probably works with X1). Uses a…
With the stock metal rear spool holder I would sometimes get a squealing noise as my plastic spool would turn on it. I decided to design an improved holder so that I could avoid those noises. This improved spool holder reduces friction as…
Print it as you like. I printed it in Fiberlogy FibreFlex 40D light green as other flex parts for bambulab, because this filament is so nice...
A poop/purge basket designed for Bambu Lab A1 Mini. It was designed to be light weight and friction mounted to the purge wiper. This Mini version is 40mm tall. This remix changes : Included BambuLab logo added fill-indicator holes…
I have decided to create some subtle 3D printed parts for the Bambulab P1S printer to give this otherwise very simple printer a typical 3D printer touch. By integrating characteristic features commonly found in 3D printers, I hope to…
Wide spools do not fit in the AMS from Bambulab. I printed spoolholders updated by Joshua Smith https://www.printables.com/model/251457-bambu-lab-reusable-spool-holder-hex-remix but after rewinding one by hand I designed the drill…
Edit 18/09/2023 : It looks Voron Team officially support Bambulab hotend for V0.2 . You can download it on the Voron design official repo This is a mount for Bambulab TH on Voron 0.2 miniStealthburner But Why ?? Bambulab toolhead is…
I have redesigned the model by adding 1 extra space for square magnets measuring 10x10x3mm and removing the bamboo logo with letters. The magnets fit perfectly, the only thing you would need to do is use hot glue to secure them. Layer…
Small plug to cover the hole on the top plate. i would appreciate Feedback and makes!
English 3D Print Template: Precision Container for Storing Bambu Lab A1 Mini Nozzles and Discs Introduction: This 3D print template allows you to create a precise container for storing four Bambu Lab A1 Mini nozzles (0.2mm, 0.4mm, 0.6mm,…
Dust cover for the hole on top of P1P/P1S
A slim poop box (30 x 180 mm) if the printer is (must be) close to the wall. Fits perfectly with the AMS. If the roller is at the back of the printer, the box might be too high. Print Settings Printer: Bambulab X1 Carbon Supports: No…
This is a Mousepad version of the Bambulab X1 and P1P Printsheets. Prints within 1 hour and 6 minutes with a 0.4mm nozzle on the X1-Carbon You will have to print WITH AMS system bacause its 2 colored. You will have to DEACTIVATE…
2024-The hard shell version has been redesigned and anti-loosening buckles have been added. https://makerworld.com/zh/models/100371#profileId-198369
If you select the step file, make sure to reorient the holder so that the teardrop shape hole is facing the correct way! Print 1 “Spool Holder” I suggest using paint on supports on the overhang where you will screw on metal spool holder…
EDIT ------------------------------------------------------- 2023.02.08. Added step files for both covers (side, front), without text, logo, motiv… Feel free and make some nice design for your self.…
I made a simple Spoolholder for the Bambulab P1P/X1C. I have not enough space between my Printer and the wall. So i needed a Spoolholder wich doesn't take to much space. I also use the original BambuLab Spoolholder. You need 2x M3x30mm…
I really liked the original design from @ humebeam . It worked with most spools, but the weight with silica was not enough to avoid the problem. I have made a remix to put weight. I have put “Rim Weight"
Simple 3 and 5 build plate holder for Ikea Platsa Cabinet. Pre-drilled holes. Needed 20mm screws. Added two differents sizes, for 3 and 5 plates. And modified with holes design. Updated using internal pre-drilled holes on platsa. Printed…
Greetings 3D Printing community, This is the CAD model of the popular and affordable Bambulab hotend derivative that uses a round radiator that can be mounted using groovemount or 4-bolt Dragon Hotend pattern. Despite being popular and…
Added versions of Zack Freedman's Gridfinity base to nozzle holders . X1 Carbon Complete hotend nozzle holders. Added Single Holders with text 0.2 - 0. 8 Single Gridfinity complete version with no text so you can add you own . Added a 4…
Simple stl of the BambuLab logo. To use the logo, open an object you want to print in a slicer of your choosing, then import the BambuLab logo stl and affix it to a surface in the slicer where it will be added to the printed model.
As there's sometimes fila-poop getting stuck in the chute-cover's bottom-brim, I've removed it, thus removing the constipation caused but this.
[Changelog MK2] 20251103 User @CoreyRogers_489647 reported interference with bed issue. Lightly remix to increase clearance. UNTESTED. ----------------------------------------------------------------------------------------- As suggested…
Added a fourth larger tool box. All boxes can be printed with Bambu. The boxes are attached under the legs of the AMS unit. Printed without support, up side down. The printing time of the largest is about 4 hours
-------------------------- IMPORTANT NOTE: Recently some of the spools sold by BBL have slightly different (larger) diameter of cardboard core. This model has 80,4mm core and was designed to snugly fit 80mm core spool. Please measure your…
