Counting matching models…
The files here maximize the usage of the print bed from the AnkerMake M5 (235 mm × 235 mm)) and M5C (220 mm × 220 mm) printers to print the honeycomb storage wall. New to the honeycomb storage wall? Look Honeycomb storage wall by RostaP ,…
Keep your phone within arm's reach — no nightstand needed. This bedside phone holder hooks securely onto your bed frame and holds your phone upright in a sleek honeycomb pocket. Grab it in the dark, charge it overnight, done. Fully…
I designed this organizer to sit on a bedside table, to hold a phone, a smart watch charger, an e-reader, and with a small drawer for things like earplugs, chapstick, etc… The caddy itself is 6.75" deep, 5" wide, and 2.625" tall. The…
I designed this so my kids could have a cupholder right next to their bed without having to have a table there. I designed the dimensions to clip onto their bed frame. It would be an easy remix or re-scaling to get it to fit your bed…
Hi, this is a bed-side phone shelf nothing else, enjoy
I tried a few other prints like this but wasn't happy with them so I ended up designing my own version. There are 2 lengths. A short and a long depending on the thickness of the material. There's only about 3mm difference in length for…
Quick mod to store your extra heatbed plates and the lid. Not sure if it with work on a K1 max.
WORK IN PROGRESS This is a fan housing that holds one or two 120mm x 25mm fans. Five choices of Air Directors Two sizes of base for single or double fans Adjustable direction on the two smaller tops Three sizes of ring (Dyson) style tops…
Also included STL's in case others didn't want to deal with the .3mf file.
Add storage while reusing empty filament boxes with a scalable, wall-mounted solution. For peace of mind, I mounted the top holders with screws and then used command strips every other which has held up well so far. Each bracket includes…
YALT - Just an easy way to check your leveling capabilities. Got everything tuned in? Perfectly assembled machine? PID and input shaping done? Beautiful mesh created? Slicer settings done? Superior bed adhesion? Then throw this leveling…
Arduino code on GitHub: https://github.com/SRRychter/Cloud.git
Bedside lamp, a matching ceiling lamp is in my profile. I created a lampshade based on the Zuzanna Lamp by LeFabShop, as i liked the idea but wanted something with a little bit more hight for a ceiling lamp. Translucent if printed with…
A bookstand to go on your bedside table that holds the next five books you are planning to read. What shall I read next? Easy to print with no supports @3DPrintBunny
A simple, single use mount to hold a Bigtreetech ADXL345 or S2DW accelerometer for input shaper calibration of the Y-Axis on bedslinger printers. Print in the center of the bed, then attach the sensor. Print with Brim for extra bed…
I had to make a bedside table for my wife, but she didn't think it would work with a 3D print. So here it is. In the picture I printed a special version just for a magsafe charger, but there is a clean version included, and a STEP-file.…
For one of the most common generic type of ADXL345, see picture (15mm screw hole distance and about 20x16mm PCB dimensions) Print the M3x4 or M3x6 model, once the print is done, set the bed to stay hot (don't let it cool too much or…
Fits ideally over beds with a 22mm edge.
Bedside table sized for Sylvanian Families or Playmobil. Designed to fit with my bed & bunk bed . The book can be found at PrusaPrints The cartoonish alarm clock in the picture can be found at Thingiverse Read more about ongoing work at:…
OVERVIEW This is the first prototype of a series of furniture pieces developed around a “construction kit” philosophy, in which printer-sized components can be simply assembled with minimal experience to create customised furniture…
A small bedside shelf to hold glasses, pods, watch etc. The shelf is telescopic and is secured by the weight of the mattress. Prints easily with no supports Comes with 2 trays one solid and one with a hexagonal mesh base. Loads more…
This is a well made, cute little bed that fits together great (thanks cassidyjames). I reduced the headboard height slightly from the original and put the B and b details on the end of each bed. I also added a pillow to the mattress and a…
Vase inspired phone stand for an off brand MagSafe charger. Print with support face down e.g. MagSafe slot facing the bed. Took 3hrs on my P1S at 0.28mm and 5% support. If you want to add weight make sure you use grid infill and you…
I wanted the bedside table catchall from the thumbnail of the catchall contest, but it didn't seem to exist, so I made it! A few small modifications to fit the shelf in my headboard, and a spot to put spare change, or in my case, earplugs…
This page will be dedicated to a cut-down version of my 5-gallon bucket hydro tower. I have uploaded all of the other tower files to this page, if something is a bit too big, let me know so I can work on it. This will allow users to print…
These tiny print beds are for the Tiny Prusa available here: https://www.prusaprinters.org/prints/146-tiny-prusa-i3-printer by Dominik Císař. I recommend you use my gcode made for the Mk3S but should also work on the Mk3. If you don't use…
Simple bracket for the Fitbit Sense to sit between the bedside table and the bed without any wires. Charger clicks into place with USB cable going out bottom and the bracket has a built-indentation for “Medium” 15x60 mm 3M Command…
A versatile scraper tool for multiple uses. Compact and easy to handle, this tool removes prints and residue from 3D printer build plates, keeps general surfaces clean, helps with sticker removal, and can even serve as an ice scraper. Its…
My daughter sleeps in a High bed, and therefore hasn't any nightstand to put the alarm clock. So I made a small shelf that fits on the sideboard of the bed. I printed in PLA but split the piece in half and then glued, just to prevent…
This 3D Model is always helping me out even if i use a Bed Level Sensor to get the perfect first Layer. You can Stop the print after the First Layer its just heigher for better view. Filament: PLA, PETG, ABS, ASA Layerheight: 0.2mm
Printed in two sections not requiring support, with interference fit that also negates glue. I printed the example at 0.28 layer height with two walls and 20% infill. I think it would be better at 0.20 layer height with four walls. Later…
Split YZ plates for printing on smaller beds like the Ender 3 Pro. The intent here is to print these plates, join them with some type of strong 2-part epoxy, and use these temporarily on the LowRider 3 CNC to mill final YZ plates out of…
Yoto Player Holder that fits over a standard bunk bed frame. I printed in PLA+ at 50% infill. Unfortunately, support is needed to print the lip which goes over the bed. Even with the support and 50% infill, though, this printed in about 1…
Bedside shelf that fits 3cm boards in the base version. Please ask for a fitting model for your bed board size. The phone holder slot is 18mm wide and should fit most phones even when using thick casings like the leather one shown in the…
1:6 scale bedside table. suitable for barbie sized dolls, or other dolls that fall in the 1:6 Fashion/Play scale. Model designed to be printed with no supports, and fitted together once printed and painted to your liking. Other 1:6 scale…
Wanted to use my Samsung Fold 3 while sitting up on my bed watching TV and needed a stand which would work on the sheets and covers without falling over, so I designed this. Printed in Prusament PLA with .4 nozzle and .3 layer height on a…
Simple fully customizable bedside organizer for holding gadgets, from one phone to a whole family of gadgets. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Resolution: 0.3mm Infill: 20% Category:…
I have tried a lot of solutions to keep my fitted sheets from popping off of my bed. I guess I toss around a lot at night, because they just do not want to stay on. Getting an adjustable bed seemed to make the problem even worse. I find…
This is a remix of Fizzy's EMS for the Ender/Switchwire conversion. It's been modified to print on smaller bed sizes (200mmx200mm minimum). Modifications include: Main section split into 4 smaller sections (PSU main, PSU subframe,…
Fantastic original design by Julien Jeanroy - May 21, 2019. My printer was too small and scaling the model down ended in disaster. I split the model and with only two dabs of super glue you can have the flyer on a smaller bed. Connection…
Fits the Yoto Mini in its protective case. The width of the hook fits IKEA beds and bed bars (20mm wide)
Not an original design. I saw something that was way overpriced and thought i can recreate it with what I had on hand. This light is shaped like a house. Where you can rest your book face down to make a roof holding your page where you…
MAG-DOCK PULSE Bedside Mag Safe Charger Stands for iPhone standby mode. There are currently 4 versions to choose between, depending on the charging puck you currently have. Mag-Dock Pulse - Iphone NEW Puck - for use with the new charging…
This is a remix of MysteryDough's Mice and Mystics insert to fit on Flashforge Finder's bed. It stores all pieces in four boxes that will fit inside the game's box. All boxes have a maximum width of 140mm. Update: I've uploaded a new…
A simple yet effective tool designed to make cleaning your 3D printer build plate faster and safer. The flexible handle provides just enough give to help remove stubborn print residue or thin first layers without damaging the surface.…
A small shelf that fits perfectly as a bedside table for the Ikea Småstad loft bed. The model include the base and a border that you glue on top so that things don't fall down. There are models for a left- and a right hand shelf depending…
Based on Wall-e companion M-O scrap your bed with style. Supports required Shaft is 3.4mm vertex to vertex, so you can create your own adjusting tolerances if needed. Enjoy it as much as i did designing it and STAY CLEAN!
his is a remix of guiosca's simple gameboard overlay which I found excellent for its simplicity, speed of printing, and ability to print on a smaller format print bed. The changes are small. I increased the thickness 0.3mm to provide a…
I know there are similar bed scrapers here but I wanted my own one I designed so here it is feel free to use it and make remixes
So… I don't have a label printer or a conventional 2D printer for paper… but I've got a 3D printer! Let's continue the age-old trend of 3D printing upgrades for printers by getting them to print QR codes to fool the Bambu Lab printer into…
New: Remotes_Plus_Phone_Holder_V1 [ OnShape Model ] Holds 3x remotes + phone Extra mounting point at the bottom Remotes_Holder_V3 [ OnShape Model ] + Chamfer to support top bevel printing + Better transition between basket and top
This is a bedside corner shelf designed particularly for those with cabin beds or similar, making a traditional bedside cabinet impractical. It has two shelves and a slot designed to hold a kindle. There is cable routing to both shelves…
This 3D design, created by me, is a set of bed risers specifically designed to elevate round-legged beds off the floor. The purpose of this design is to allow robot vacuums to pass underneath the bed or facilitate cleaning tasks. The bed…
This is a 23cm x 21cm storage container for your home or office. I designed it to keep my stuff from falling off my nightstand. It is adaptable if you would like to make changes to fit your lifestyle. Updated: I added a smaller version…
Xiaomi camera C300 bedside holder layer height: max 0.2 mm material: PLA, PETG, ASA/ABS Print with supports if the bed frame is too narrow, you should add felt pads. Feel free to remix
About: This is catch all tray I designed with some patterned sections. Alot of the other trays seemed kinda jank or bland so I wanted to see if I could do better. The tray itself has 3 flat slots for keys, wallet, sunglasses, etc. and in…
A Table that fits the old Malm Bedframe (50*75mm). Prints on the Side without Supports, scale Z to your personal preference.
all credit to the original designer , I just sliced up the model in bambu so it's a littler easier to print and get started, I also consolidated the materials list so it is less easy to procrastinate. --- print settings build guide —…
This is a 3D model of a moon lamp cover that is designed to fit over a Xiaomi bedside lamp. It is made of PLA filament and has a realistic texture and color of the moon. It has two versions: one with a hole at the bottom for the cable and…
The EdgeMate BedShelf is a sleek and practical bedside solution designed for minimalists and small-space enthusiasts. Perfect for holding your essentials—like your phone, book, or drink—this compact shelf clips securely onto the edge of…
女儿的高低床没有合适的杯子架，特地设计了一个，再不用担心猫会把杯子子打翻了。
I printed in PETG and 10% infill since it does not has to face higher weights. Also i added a small cable passthrough. I made a V2 (also included) with less material used and basically same strentgh.
This is a further development of the bedside lamp with the box shape https://www.prusaprinters.org/prints/20852-bedside-lamp-box-led-12v-25w . Now this lamp had become a tube shape and you can print the backside as switch or dimmer…
Little Bed Side Box for Bunk Beds. It has a size of around 144x80x80mm You will get best stability, when printed on the side, if you have filament with good layer adhesion, feel free to put it on the botton to reduce filament usage for…
This cup holder fits well onto a bedside wooden rail that is around .75" deep. Material: PLA Infill: 25% Wall Thickness: 4x
Just follow the original instructions to print it: Print caddy on its back. Print drawer in its working position. (Supports may be needed deppending on your printer overhang capabilities)
bedside table for Ikea STORÅ bunk bed printed in PETG 60/70 % infill
this is a simple model I whipped up for a friend, though id might as well share it here. should be glued with double sided tape or anything really. hope this helps!
This is a copy of the Lana from Netflix's series "Too hot to handle". The design was made from photos of the real Lana, so the dimensions may differ from original. The assembly consists of 3 parts: 1)Bottom part 2)Transparent part 3)Top…
This tool helps keep bed sheets from tangling during drying. It's 3D printed in TPU, making it flexible enough to withstand the tumbling and heat of the dryer. Simply insert a sheet corner into each of the side holes and place the center…
This is a simple wall mountable phone and glasses holder that can be easily mounted using double sided tape to any flat surface. It will easily hold any modern smartphone in a easy to access location along with a pair of glasses or…
Edit: Don't bother with this. Instead use Prusa's new Mk3s 2-piece design with integrated belt tension adjustment which will work on Mk2 and above printers. See "Y-axis parts: here:…
The model from Mountainstorm looks very good, but the mount was a bit too big, so I designed an adapter plate to hold both the original and third-party magsafe chargers. This allows you to spice up the stand with a contrasting line around…
Remix of a perfect holder by Jacob Bryce. I had a need for smaller holder so decided to remix, download and enjoy!
i needed a pocket to hold my apple controller and other things on my side of the bed where there is no room for a table. easy print with no supports . Print Settings Printer: custom cartesian Rafts: No Supports: No Resolution: 0.30…
I really liked the original model. But like others, I wanted one with hexagon cutouts. Thanks for the base model. Printed in Polymaker Light Green PLA Pro.
One evening while dropping my earplugs repeatedly whilst trying to get into bed (which are IMPOSSIBLE to recover quickly if you're sufficiently nearsighted, by the way) I had the idea for my ideal earplug container which would be easy to…
Bedside table in 1:12 scale for doll houses. The fit in the drawer is kinda loose for commodity. Body is to print on its back with supports on the legs. Drawer is to print it on its bottom. 45 mm l x 30 mm w x 50 mm h
Tired of rolling over your phone when you charge it in bed? Do you use your phone as a remote to your TV and get tired of losing it in the sheets? Don't have a night stand? Well this bedside phone pocket is just for you! Designed to fit…
Bedside table that wall mounts with 3 screw holes. Includes and under shelf glasses holder
Corner protector for bedside tables . Simple corner protector, with two possible sides, one straight and one rounded. For 22.5 mm ikea type wood. **add model with 3cm x 3cm Make it in flexible material, as it has some cons to stay gripped…
You need to have 2.5 metr of light strip and some smart controller. And when you will print a smooter you need to turn on vase mode and walls to 0.4mm.
Holder for Apple Ipad 10.2" (Gen 7th-8th-9th, AFAIK other models have different dimensions that migth not fit or fall out from this holder), that can be attached to the bedside, handy for putting away your Ipad when you got to sleep. Made…
This is a modified version of PjotStrog's Magsafe charger with an additional AirPods charger and wallet storage. It's specifically made to store/charge the following items: iPhone 13 AirPods (2nd-Generation) Saddleback Leather Wallet…
A place to store your extra heat beds
I designed this shelf to keep my CPAP machine and alarm clock organized on my nightstand while minimizing clutter. The top shelf supports the CPAP machine, while the lower shelf provides a dedicated space for an alarm clock or other small…
A full parametric laptop holder you can clip to the side of your bed. Load it into your favourite CAD program, adjust to taste and print away!
This is my first design where i wanted to make a product better than i could buy in the store but that most people could print on their own 3D printer. The paint shield has been designed with the following features: -Razor Sharp Paint…
This is the first version of a bedside shelf for IKEA MALM Beds. There a some minor design flaws, but print turned out quite well (except a problem with first layer) and fits perfectly. it is a quite stable design. if someone wants to…
3D printed furniture is always challenging because to achieve some stability you usually have to throw a lot of material onto your machine to get a decent result. This proof of concept tries to prevent exactly that. My idea was to create…
I got tired of losing the remote in the bed. Designed and printed and problem solved. Simple solution to age old problem! Printed on end, no support needed. I did print with a brim, but it is optional. Useful in many situations.
Fit & Tolerance: Every 3D printer and filament brand has slightly different tolerances and shrinkage rates. If the interlocking parts or joints feel a bit too tight, a quick touch-up with a bit of sandpaper or a hobby knife will get them…
Well, if your a parent of a young child with bunk beds then you know the middle of night call “DAD, I CAN'T FIND MY WATER" . Which you have to come in and dig through the blankets and corners of the bed to find said water bottle. Well it…
As a replacement for a broken glass lamp shade. To blind the bulb, the through slots are not radial. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15mm Infill: No Filament: GEEETECH PLA white…
Bedside lamp 2 models rabbit figure. Modified and added parts for coupling G9 lamp and bottom cover to cover cables. The model is prepared for 0.4 nozzle, in case of doing it with 0.6 nozzle apply an expansion of 0.2 mm . It is not…
My take on a simple bedside shelf! Since I don't have a lot of room for a bedside table, I designed a small bedside shelf! I used two strips of double sided tape for mounting and it hasn't fallen off, though I added a version with m3 bolt…
This is a organizer designed to hook onto the side of a bed. It has a hook for keys, a holder for smartphones with a hole for a charger, a holder for airpods with a hole for a charger, and a holder for an applewatch gen 3 and its charger.…
Bedside phone holder for 3 cm bed frames -------------------------------------------------------------------- Max phone dimensions: 3.5 x 8.5 cm Inner height: 10 cm -------------------------------------------------------------------- On…
This is an organiser I created to hold everything that clutters up my bedside table. I added the top shelf later, so it prints in three parts: the small lower section, the base and stand, and the top shelf. The small lower section can be…
![Mk3 style Y belt holder for Prusa Mk2.5 / Mk2 / Mk2s [Mk42/Mk52 12v heatbeds]](https://media.printables.com/media/prints/35703/images/353134_8b23af4b-5aed-494c-ad86-9e8eb407a9f8/bcfe09fe5a75be63615187a9088cf5c5_display_large_35.jpg)
