Counting matching models…
If you're looking for an easy-to-print case and diffuser for your WS2812B 32x8 LED matrix panel, you're in luck. The case and diffuser have been designed to be printable on a common-sized print bed, and are split into separate parts for…
Children are amazing, and they get into everything! This is a childproof lock for Bifold Doors commonly used in closets and pantries. Just slide the out of the way along the top of the doors to allow you to open them, and slide it back…
Build Instructions: Print Blobifier and optionally Brush Holder and associated Bucket-Brush, Install M3x2 Magnet into Bucket-Miller350, Install 4 Heat Sets into SB_Shaker_arm, Install the SB_Shaker onto the SB_Shaker_arm using 2 M3x8 FHCS…
Blobifier - Dropin adapter for Bambu silicone nozzle wiper kick out Brass Brush and dropin adapter for Bambu Silicone Nozzle Wiper Bambu Silicone Nozzle Wiper: https://eu.store.bambulab.com/products/heatbed-nozzle-wiper-a1 This is a…
Update 8/20/2025 - I added the Fusion (.f3d) files for anyone who is interested in modifying the models. I have owned a copy of Sidereal Confluence (remastered edition) and the Bifurcation expansion for some time now. Given the prevalence…
This simple sliding locking mechanism should be enough to keep pets and younger children from opening your bifold doors. Can optionally be printed with a handle on one side or both. OpenSCAD file attached should allow a decent range of…
This is a template for a traditional style leather bifold wallet. It is recommended to use 3-4oz vegetable tan leather for something like this. Will need to cut out the following quantities of each template from your leather to have…
V1 I designed and printed this to replace the existing pin for my bifold closet door. There was an extra gap at the top of the door, causing the existing pin to slide out of the track. The design is longer than the original to account for…
A simple door lock to keep the kids out of the closet. Easy to modify SLDPRT file for different thickness doors. Prevents the door from opening when in the center section, slide it over to open. Simple and effective! Print instructions…
A simple print in place design that perfectly displays your business cards at an angle! I suggest printing at a lower layer height to allow for the correct tolerances, Happy Printing
Same idea, smaller size, less material, vertical print,use 3 perimeters to print solid
More info on https://github.com/Dendrowen/Blobifier
A mod for the Blobifier mod that replaces the tray and servo arm with a rack+pinion mechanism to allow for a shorter base. Note: I'd recommend adding some plastic-safe grease to the rack and pinion interface to reduce wear and tear in the…
This door knob is designed to attached with a 8-32 x 2.5" standard machine bold and fender washer. Capture an 8-32 nut in the print by pausing the print at layer 45 (assuming a .2mm layer height), insert nut, and resume print. Printed…
Voron A4T toolhead Blobifier shaker arm A modified version of the shaker arm and shaker to fit the A4T toolhead. Variations Against the Stealth Burner Shaker Design Redesigned the shaker to match the A4 toolhead geometry One M3x8 SHCS…
Modification of blobifier for Sovol SV08 Build of Materials: Servo SG90 or MG90 - 1pcs Switch OMRON D2F-5 (use NO) - 1pcs Magnet 6x3mm - 4pcs Screw M2x12 - 2pcs Screw M2x6 - 1pcs Screw M3x6 - 3pcs Heat set inserts (M3) - 2pcs Brass brush…
Just a simple bambu nozzle silicone brush holder that hovers over the blobifier bucket rather than the opposite side. It makes more sense for me to have it over the bucket to collect any left over filament.
Un adorabile e muscoloso gatto che mostra i suoi bicipiti scolpiti! Perfetto come decorazione da scrivania, regalo divertente o mascotte motivazionale. Questo modello unisce la dolcezza felina con la potenza di un vero culturista. 🖨…
Been working on this for a while on and off, pretty much has been working great for my setup. I had to change the files some to work for the standard bed layout for the 350mm 2.4 since my bed sits lower. Its also made for a 355mm and can…
A remix of the taller A1 nozzle brush for the Blobifier MMU purge system. Printing settings: Voron standard, vertical orientation
You don't need to feel frustrated about having to hand-pick strands or bits of filament from the bottom deck of your Micron printer anymore! You can instead, use these buckets (originally designed by @3DeezNutz ) but now in combination…
Created a Phone Stand for watching Movies on the Train etc. Just put the top of your phone in it and adjust the angle to your needs. There is a hole in one side to add the MobiPhoneStand to a keychain. You can get those carabiner hook for…
If you like this model, feel free to tip me at https://ko-fi.com/kcthechemist. If not no worries and enjoy! Good for manual hand columns. Print each model on it's side. Keep in mind solvent and plastic compatibility. ABS melts with…
This shaker adapter should work with the standard Trident/V2 toolhead mount for dragon burner.
Hab hier einen Schwimmender Tubifex-Futterspender konstruiert.
I have closed the shaker in by 2mm either side. Because of this mod, and the fact my toolhead was pushing the shaker back too far, I also extended the shaker arm by 5mm - this allows the Xol to sit back at 0 on the X axis when shaking. I…
simple 3d printed pen holder to make welding easier. since cables are short using dh20 can be difficult so check this model also https://www.printables.com/model/448320-bifrc-dh20-show-holder
AVISO: las alturas de la catapulta del cepillo y de la bandeja deben ser ajustadas físicamente ya que esta modificación se mueve con el pórtico en todo momento para ahorrar tiempo en cada purga. Por lo tanto es recomendable comprobar que…
1.The closing angle is 0 degrees, and the opening angle is 180 degrees as shown in the figure. 2.This design is suitable for converting voron or vzbot into trident. 3.I have provided the settings for the nozzle cleaning and waste…
UPDATE: I added a version with hooks so that the doorstop can double as an over-door double hook for hanging clothes/light bags/etc. Check the files! Do you have cats that love to get inside your closet, but it's a bifold door that the…
My Laundry door closet guiding rail hardware broke and replacement hardware didn't seem to fit without additional modification. On top of that, it was like $30. I took some measurements and replaced the spring pin. I had to compensate for…
This is a bifold door upper pin roller. None of the other model i found online were the right size apparently mine was smaller. I printed it in PLA at 100% infill at 0.1 resolution with organic supports "probably not needed but didnt…
Nozzle seal + silicone brush + blobifier standard mount
I wanted a travel notebook like the Lochby mini, but I am new to journaling and wanted to see how I much I use these little things before my ADHD invests in another hobby. Holds 2-4 field notebooks I used 1mm craft bungee cord, but i…
Mit der Presse können Sie Hackfleisch in Form bringen, mit Feta füllen und mit Hackfleisch verschließen. Ich habe es mit der Rechteckigen Form ausprobiert. Das hat gut funktioniert. Ich habe noch zwei ovale Formen hochgeladen. Eine Große…
This is a remix on the the Blobifier bucket for use when you have a single fan “ The Filter ” installed. The magnetic wired mount interferes with the standard length bucket and doesn't let you snake it around the Blobifier servo. This…
Here is my holder for the BIFRC DH20 show spotwelder, something not too big with plenty of ventilation that allows the welder to be held steady.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Stand for the BIFRC spot welder to hold it vertically to make it easier to use. 30/12 - Added updated version with enlarged cut-out at bottom to accommodate bottom button and ports. Category: Tool Holders & Boxes
Replacement handle for Bifinett KH1204 Customize This thing was made with Tinkercad. Edit it online Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0,2 Infill: 10% Category: 3D Printing
This is a basic slider replacement for a bifold type door, i print it upside down without support.
Batman "BIFF!!!" If your printer supports the M600 command, you can use the Prusa color change page to add a pause for filament change at or slightly higher than 2mm & 4mm. https://www.prusaprinters.org/color-print/ Openscad code is…
This is a mount for an ABUS Combiflex 65 lock. The mount will fit on 33,5 mm tubes. In my case I use it for a Hudora BigWheel scooter. It's the first model I created and I included the FreeCAD files in case you want to optimize something…
make a 3x3x3 from almost any shape even if it has a hole! based on the void cube. Stl's are for example. I call the examples the "ghost void cube" and "bumpy bead". Print instructions Unassociated tags: customizable puzzles, puzzle cube…
the original 300 and 305 blobifier buckets where very short and filled up fast and would spread out good when shaking and i didnt like that! so i designed my own with a way bigger bucket and it also has a very very slight slopw towards…
Mesh files are compatible with Schiit 6x9in devices using the old-style U-shaped chassis (e.g. Bifrost 1, Lyr 2) and Noctua NF-A14 fans (and probably any 140mm PC fan). Use one left part and one right part; both the fan brackets and the…
Created a New Silicone Nozzle Brush holder, with a Small tray around it to catch those stray filaments and Blob's from the Blobifier that dont always come off.
This is a pattern for a 9-pocket horizontal bifold leather wallet. Pattern components Shell_Inside_Left Left side of the inside shell of the wallet No trim allowance. Shell_Inside_Right Right side of the inside shell of the wallet. No…
Super Mario Wonder Purple Flower Coin. Print vertically using thin tree supports for best results.
Remix of horizontal z chain moving the mount to B drive to avoid collision of chain with blobifier Only compatible with IGUS chains Temperature mount can be found :…
I don't recall if I changed any other geometry, but this works with my LDO-spec 300mm bed perfectly. (Actual bed dimension is 305mm). YMMV. I intend to remove the decontaminator eventually and switch to its single pin sheet stop, but for…
I don't know if this will even work for anyone else, but here it is. Peg presses in and is fastened to corner with 2 screws. Screw holes are chamfered for shorty drywall screws. Pre-drill the holes in the wood. Printed at .2 layer height…
For my Homecockpit i use Mobiflight (what else…) and for this some Arduino Megas. Additionally i use a Leonardo without Mobiflight for some other funtions. For both i found the mentioned holder, but changed the mounting holes for the…
Bifold gate latch I needed to keep from doors swinging open.
We have found that cheap MG90/SG90 servo motors can die pretty fast from bed heat, therefore we developed the option to use a pancake stepper motor instead. This model uses a small GT2 belt as a toothed rack to move the blobifier's tray…
The original pull handle has tiny metal pegs and it's almost impossible to fix if you break them or lose them. I replaced it whole, adding a handy “dome” which is easy to grab. You can screw it or simply glue it to the broken handle.…
Puts the airtag on the outside of the wallet to reduce its impact on the back pockets wallet users. The wallet straddles the opening, allowing the airtag to not increase the thickness of the wallet.
This is a box to control FSDreamTeam's GSX in your flight simulator. I printed it with the following settings: My controller card is a Pokeys 56U USB card. I wrapped the key-bindings with it from 1-0 and the Ctrl+Shift+F12 Otherwise you…
Tested with PLA, decided to print mine from TPE for better durability during crashes (it's for kids). Mounted to the bike frame with zip ties. No supports needed. Bunch of frame diameters included, if you need specific size, let me know.
Modified with several changes. Mix and match to suit your needs - eg. use the servo arm for cheap 9g servos, use the OG gantry mount to mount underneath 2020 extrusion Gantry mount modified to be able to be attached to upright 2020…
Print and spin! Print Settings Supports: Yes Resolution: Hires Infill: 16% Category: Toys & Games
This is a snapfit case for the BIFRC spot welder. No mouting screws are required. The case is a tight fit, without visible gap between the case and the lid. There is a button and a hole for the LED. I used a bit of hotglue to cover the…
This is a quick to print, rental house friendly wallet and key hanger. It features grooves on the back for Command Strips, eliminating the need to drill holes in drywall. This is meant for a bifold wallet. I could remix it for any wallet…
The original version hits the gantry screws while printing. This solves it! I hope you like the models! If you want to support my work you can Buy me a Beer !
Simple case for the BIRC Spot Welder. Just need four M2x12 button head screws Designed to work with the Spot Welding needles that can be purchased with the welder and the wires need to be connected on the back side of the PCB. Thanks for…
It's a pullout tray for the pen pocket hole in the Dango bifold pen wallet. Extra Materials Needed: 2 4mm x 1mm magnets 1 4mm x 3mm magnets You'll need to superglue the anchor to the magnet end of the tray and the endcap to the other end.…
There are 2 parts to this print. The case houses the board nicely. This is a remake of one I originally printed for my Bifrc spot welder because I like the design and the layout of the case. I could not get a nice print of the cover…
This was used to create an enclosure for my 3d printer, using Cable trunking Some plastic/cloth/acrylic IKEA Bror M5 screws + nuts The prints in this page Hopefully the mechanism is evident in the picture. Otherwise, the whole assembly is…
I designed this for BIFRC DH20+ spot welder. There is opening at the bottom for ports and button. No "M" logo on stl. No supports needed. New version (V2) is more sturdier and has support for handles. Print Settings Printer Brand:…
Product Need The bottom plate was missing from my bifold door, which caused the door to release from the track at the top. Solution Using the intact plate on another door, I modeled a replacement plate with accurate thickness and inset…
A simple sliding lock for a bifold closet door. It can be used to keep pets and small children out of closets.
Mobiflight Seat Belt & No Smoking Sign Panel You need: Compatible Arduino board (Mega, Micro, Uno, ...) 2x warm white or wold white LED's with matching resistor (I used two warm white 3mm LED's with a 1kΩ resistor) 2x M3x8mm countersunk…
This is a snapfit case for the BIFRC spot welder, no mouting screws are required. The case is a tight fit, without visible gap between the case and the lid. I used a bit of hot glue to cover the hole for the LED so the light from the LED…
Just to be safe, I printed it with 80% fill, but it probably would have been enough with 40%. Rotate the print 270°. Layer height 0.20 Por asegurarme lo he impreso con un relleno del 80%, pero seguramente con un 40% le hubiese llegado.…
You may need to scale this to fit your closet's knob - by default it fits a knob w 28mm base. Print with wood filament or paint to match. 3 designs plus plain included, along with source .f3d files.
Das Modell von https://www.printables.com/model/929117-ryobi-router-vacuum-adapter-for-nilfisk-multi-ii-3/files hat mich inspiriert, dieses Konzept auch für die DeWalt DCW604 umzusetzen. Verwendete Hardware 2× Metallstangen Ø 7 mm, ca.…
Adapted for PTK 7462W MG servo (better than MG90s)
Sliding Bifold Door lock for small kids and cats. I liked the idea of a poll coming down so I didn't have to reach as high to slide the lock back and forth. They were $15 on amazon so I created my own. I made it so you could pick up a…
This is a snapfit case for the BIFRC spot welder. No mouting screws are required. The case is a tight fit, without visible gap between the case and the lid. I used a bit of hotglue to cover the hole for the LED. The light from the LED…
Product Need The bottom plate was missing from my bifold door, which caused the door to release from the track at the top. Need a thinner design to fit in space and allow door to connect. Outcome My first attempt at solving the problem by…
Since I use the "breeze" auxiliary fan on my Voron 2.4, I couldn't mount the blobifier on the side. So I came up with another solution that can be mounted on top, doesn't require any "shake," and moves the blobs with a shield. The blobs…
I converted a 25mm thick closet bifold door to french doors by duplicating the bifold hardware on both sides (I didn't want to mount hinges). This is a functional duplicate of the original top bracket that holds the top pin of the bifold…
Just added som reinforments to make the upper part, where the tray slides a little bit more rigid. No other changes required. Is compatible with original mounts and shaker
Keep your cats out! (at least that's what i use it for :) 35mm or less thickness on the doors No supports needed. Recommend 4 wall loops and 50% infill for strength
I converted a 25mm thick closet bifold door to french doors by duplicated the bifold hardware on both sides (I didn't want to mount hinges). I made this door catch to keep the new french doors from swinging too far inward as well as…
A template for the 5mm locating pins on the Blum Bifold lift mechanism. First hole is 37mm from the edge. Second hole is 192mm back from the first. Printed in PLA
I designed a replacement cover for the rear Picatinny rail of the GRS Bifrost gun stock. I did not like the Pica rail and the grip of it when stabilizing the rear end when shooting seated. This gives you clean look and great control over…
this is my mix between blobifier, blobifier x and designed to fit a mercury zero g printer
A cap for the top of a bifold door that holds the two panels open at a fixed angle. Six angles: 15°, 30°, 45°, 60°, 65° and 75°, one file each. Fold the door to that angle, then press the holder down over the top edges at the hinge. Fit…
The tabs which the MG90 sits on where pushed by about 2mm to allow for taller servos to be installed without bending the rack.
I have closed the shaker in by 2mm either side. Because of this mod, and the fact my toolhead was pushing the shaker back too far, I also extended the shaker arm by 5mm - this allows the Xol to sit back at 0 on the X axis when shaking. I…
Super Mario Wonder Purple Flower Coin. Print vertically using thin tree supports for best results.
Been working on this for a while on and off, pretty much has been working great for my setup. I had to change the files some to work for the standard bed layout for the 350mm 2.4 since my bed sits lower. Its also made for a 355mm and can…
Sliding Bifold Door lock for small kids and cats. I liked the idea of a poll coming down so I didn't have to reach as high to slide the lock back and forth. They were $15 on amazon so I created my own. I made it so you could pick up a…
I converted a 25mm thick closet bifold door to french doors by duplicated the bifold hardware on both sides (I didn't want to mount hinges). I made this door catch to keep the new french doors from swinging too far inward as well as…
I converted a 25mm thick closet bifold door to french doors by duplicating the bifold hardware on both sides (I didn't want to mount hinges). This is a functional duplicate of the original top bracket that holds the top pin of the bifold…
Das Modell von https://www.printables.com/model/929117-ryobi-router-vacuum-adapter-for-nilfisk-multi-ii-3/files hat mich inspiriert, dieses Konzept auch für die DeWalt DCW604 umzusetzen. Verwendete Hardware 2× Metallstangen Ø 7 mm, ca.…
Update 8/20/2025 - I added the Fusion (.f3d) files for anyone who is interested in modifying the models. I have owned a copy of Sidereal Confluence (remastered edition) and the Bifurcation expansion for some time now. Given the prevalence…
