Counting matching models…
This is a remix of the awesome looking OctoGlasses from Ramalama2 which fixes some issues in the original design. Design There are the following changes: The terminal cover on the left side of the board is now fully accessible The fans…
This is a remix of the BTT HDMI display mount Voron with all modified parts being compatible with the originals design. So you can Use the remixed mount bracket with the original asymmetrical display frame Use the original mount bracket…
**This design is for HDMI5 V1.2** If you're looking for HDMI5 V1.1 mount, use this one: https://www.printables.com/model/787236-btt-hdmi5-v11-display-mount-voron Notes Mount BTT HDMI5 Version 1.2 on Voron V2.4 and Trident My display came…
Easy customizable OpenSCAD electronic project box V2.4 by pbtec You’ll need to download the free, opensource OpenSCAD software from https://openscad.org/ and install it. Once installed, open the ".scad" file in Openscad. Activate…
What is this? This is a mount for the BTT Eddy for the stock Sovol SV08 toolhead/shroud. Please note: The BTT Eddy needs to be removed from it's casing to fit. Why another/different mount? I had to remake the design because with me the…
BTT-PI v 1.2 Two piece case for BTT Pi v1.2. Though this is my own design, I had a lot of inspiration from this design and highly recommend it if you need case for RPi 4b. Print with your desired material. No supports required. Print with…
LRS-200 : M4x5-8mm BHCS, SHCS x4 *8mm bolts may too long, be careful. RS-25 : M3x5-8mm BHCS, SHCS x 2 *8mm bolts may too long, be careful. raspberrypi : M2.5x5mm or longer BHCS/SHCS x4, designed for considering self fixation without using…
A simple stand to display any of the 3 versions of the Lego Back to the Future DeLorean. I printed the stand with PETG to prevent sagging over time. PLA might do fine as well.
The screen is held into the housing using 4 m2.5x8mm socket head cap screws. The housing attaches to the Voron 2020 rail using the default m3x8mm socket head cap screws. This screens screw pattern is too wide to accommodate the default…
Much thanks to Reagantoby27 for helping me redesign and test the evolution from V1 to V3 and all its variants. See P320 variant:https://www.printables.com/model/1011678 Holds a mag, at an angle. Designed off of Glock 9mm mags, not sure…
This is a BTT U2C Mount for my DIN Rail Bracket. You can find the bracket here ! For the U2C you need M3 flat head screws and M3 Nuts. For the DIN Rail Bracket Mount you need M3 countersunk screws. If you like what I do feel free to buy…
Mount Mellow UTOC or U2C to DIN using this PCB DIN Clip . Attach mount to PCB DIN Clip with 2 M2 or M2.5 self tapping screws Attach UTOC or U2C to mount using 2 or 4 M3 x 6mm or 8mm
Edit 3/12/23 0800. I think I finally got to a version that prints without a bunch of weird settings and crazy supports. This is a screen case for the BTT TFT35 SPI V2.1 that BigtreeTech introduced for their CB1, Raspberry Pi alternative.…
The mounting holes for the BTT Pi 1.2 are measured directly from the STEP file in BTT's GitHub repository, as they differ slightly from a regular Raspberry Pi. To mount the boards, you will need: four M2.5x8 screws (or M2.5x4 when using…
update 7/11/25: added box options for heat inserts and hex nuts for the base, revised stand offs to work with inserts (thicker but tapered on top so they shouldn't hit any solder joints). currently untested/unprinted but should work with…
The Mount This mount replaces the stock housing for the BTTEddy probe, bringing it in like with the Y axis of the nozzle. This makes it so we no longer have to worry about Axis Twist Compensation . The mount can be easily installed using…
http://www.prusa3d.com/#a_aid=3090
Model Update: 3/18/23@2030 hrs Pacific. After printing one of these, i realized that I made the counterbores for the screw holes too small in diameter. The counterbores are now 5mm diameter and should clear all M2.5 socket head and button…
Y accept requests for another artist, song or playlist that's not on the list, It'll be the same base for them. Artists: Camila Cabello Katy Perry Taylor Swift Bad Bunny The Weeknd Lana Del Rey Morat BTS Jesse & Joy One Direction Peso…
I love this design by mbrady because it sends air where you want it, rather than randomly blowing it away like the top down models do. I oriented my Octopus so this blower shoots the air straight out the back of the base. I used a nice…
This is a Pivoting Display Mount for the BTT TFT35-SPI V2.1 The pivot assembly is spring tensioned to apply friction to the mechanism. I have repurposed an old bed levelling spring for this. A reasonably sturdy spring with a minimum ID of…
Mount for the BigTreeTech Octopus V1.1 board using a DIN rail. Options for 92mm and 120mm fan. Prints without supports. Printed in PETG at layer height 0.2mm. I mountend the Octopus with M3 brass standoffs. Fan Mounts are designed for M3…
-Display frame (stand) for your kpop photocards. -Plain version without any text to display other cards such as Pokémon, etc. is also downloadable. -It can be printed in one piece standing up (I recommend using organic supports) or lying…
Just slightly remixed model (https://www.printables.com/cs/model/518519-btt-pi-tft50-v21-screen-mount-for-voron-skirts) cutout for reset button frame is around whole display with cutout for buttons (just remove supports) I used this…
Hello, this is my sculpt of BT from Death Stranding. I use Oculus medium for a sculpt. Hope you enjoy my work, and if you like DS too, feel free to download stl and print one BT for yourself. :) Here is video from creating…
The CheaPad : the most affordable DIY Klipper Pad ! Let me introduce The CheaPad, an incredibly cost-efficient alternative to all the Klipper pads out there! 🚀 I'm excited to share this minimalist yet highly functional solution for 3D…
Hoy os dejo una reparación de unos cascos bluetooth JBL TUNE 510BT de mi hija. Para arreglarlos hay que desoldar algunos cables como comento en el video.
I used the dimensions from the BIQU store page for this model since they do not yet have it on the github page. I actually printed a slightly different variation of this file since I used L adapters for both the HDMI and USB C ports which…
See below the .cfg attached. ;) on to the Other Files section 🛠 Sovol SV08 Klipper Macros: Tap Z-Offset, Nozzle Cleaning & Adaptive Purge Thanks to Vlad for the brilliant firmware that enables the BTT Eddy sensor to support tap-style…
Thank you all, who downloaded this design. I want to also tell you that unfortunately you will need to print the cover again. The small print. I found an issue thanks to all of you who have told me Later Edit : April 30, 2024 Added the…
4Stk. M3Sx4.0 Gewinde Einsätze werden benötigt.
Update der Display Aufnahme für Bigtreetech btt pi tft50 v.2.1 Das Original Display Halterung ist unter https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/alanho/BTT_PITFT50_v2_Mount zu finden. Der Original Halter für den…
!!WARNING!! I am not a structural engineer! I am making this sh!t up as I go along. The risk I see with the project is the risk of the PETG limbs giving out while under tension. This could result in the limbs shattering. For safety sake,…
UPDATE Added v2 (RECOMMENDED) Changelog Easier to tighten. Accommodates: Standard ADXL345. BTT ADXL345/S2DW (see this make ). 3 versions of the mount (see filenames for explanations). The bed spacer now plugs into the mount. BOM 4 x M3 x…
Do you have the fantastic Tribute64, Brawler64 or Admiral BT wireless gamepads, but notice that the dongles that plug into the front of your console...sag? This is especially true with the Retro Fighters Brawler64 and made worse with a…
Revisions 2024-03-26 Revised Main Body to incorporate Straightened Latch. Replaced corresponding Motor Plate as well. Overview This group of objects implements a CAN based Toolhead for the Voron 2.4r2 3D Printer. The design uses a…
TFT 5" holder for Voron BTT 2.0 TFT50 this is a remix of ryanwilson's TFT holder. I raised the edge a bit to close the gap in the frame. After printing just break away the bridging bar. For printing please use the original instructions.…
This is a mount for the BTT EBB42 toolboard for Eva 3.x with Orbiter 2.x extruder. Two versions available: one with a mounting option for piano wire inside umbilical cord, one with mounting option for the outside. Piano wire can be…
User Smuk3d asked me if i could create a version of the TFT35 Voron 0.2 housing that moved the viewable area of the screen to center, and allowed for a more symmetrical bezel. It was alot of work and required a 90ish percent redesign of…
I remixed this model at a request to have the honeycomb design from another model. UPDATE: 11-24-2023 I updated the files and added more clearance for the USB and ethernet ports based on makes that have been submitted. The new files all…
Mounts on the brace on the rear using 2x M3 heat inserts. Offset: X: 0mm, Y: 27.53mm
Replacement adjustable beard comb for some Philips HC and BT models. Recambio peine ajustable para barba compatible con algunos modelos Philips HC y BT.
This is a non destructive way of fitting a HDMI output to the Amiga 500. Adding the RGBtoHDMI adapter to the original Amiga 500, gives it the ability to deliver a perfect digital HDMI output. When the small board is fitted inside the…
UPDATE (2026. 08. 16) : I’ve uploaded a new version of the box designed for a 40×40 mm fan. This is the only change compared to the original version. E3V2-MantaE3EZ-BOX-poly-40x40.stl I mportant information about the E3V2 - Manta E3 EZ -…
70th Anniversary of the Founding of the People's Republic of China I share the files of this remote control tank. I designed M551 IS-3 ZTZ99A T54 and so on RC tanks. This 99AMBT is an early-made model and therefore has many defects. My…
Modular tray to let dish appliances and cutlery drip of. Designed to sit on the edge of the sink so the water can drip back into the sink. Currently the parts are designed that you need exactly one of each. Height of overhang: 4,6 mm…
Simple BTT SFS (Smart Filament Sensor) V2.0 holder for Voron back panel. There is almost 1mm gap between backpanel and holder. Its just for tolerance. You can use 1mm foam tape to fill the gap. STEP file included.
Mounting bracket for the BigTreeTech (BTT) U2C CANBUS Board for mounting on DIN rails. The bracket is attached to the Voron DIN Clip ( GitHub Link ) with 2x M2x10 self-tapping screws, while the board itself is attached with 4x M2x10…
This is a remix of the original PI4B Adapter case from Bigtreetech. Changes: Chamfer near the DSI port exit to avoid supports. Holes where to screw the CB1 and heatsink, both with M2.5 nuts or screw on plastic. Bigtreetech logo/name…
I recently decided to install a BTT smart filament runout sensor on my Voron V2.4. I side mount my spool holder (front left of the machine) so I wanted a sensor inline with the bowden guide which would be easy to load, easy to access, and…
Remix of the both existing models. The grenade model comes from here https://www.printables.com/model/483438-complaint-department-please-take-a-number The number tag comes from here…
A remix of @Anollya_1115736 M8P Fan duct but with @SimplifiedLife's Vents from his Octopus Duct, I increased the walls to be thicker on top and sides for it to be more sturdy (the original cracked for me, and a optional bracket to use if…
These files are designed for the most part for laser cutting. But if you are not confused by the small size, you can also print them on a 3D printer. To increase the size, you can cut these models into pieces, print them separately and…
A FINISHED MODEL IS NOW UPLOADED *DOWNLOAD “BTTPi_V1.0_TOP” AND “BTTPi_V1.3_CASE” FOR THE WORKING MODEL! BigTreeTech just launched their version of a Raspberry Pi! Well when new products are released, it gives people like us a chance to…
Quick heads up: These remix designs were somewhat “intended” for the case being positioned on the X-max end (right side) of the LR3 gantry. If you are planning for placing it on the X-min (left side), then the only concern with simply…
This is a screen case for the BTT TFT35 SPI V2.1 that BigtreeTech introduced for their CB1, Raspberry Pi alternative. The CB1 has the drivers for this display built-in. The Screen sits a couple millimeters below the level of the housing…
Rear mount to mount the EDDY BTT sensor on the DragonBurner toolhead
Create for the new bigtreetech Smart Filament Sensor(SFS) 2.0 Mount with voron2.4/trident. Suit for 2020 extrusion.
This LCD cover is to fit the Big Tree Tech TFT35 V3.0 on a MK3/S Bear frame. In this design the supports are held in by 4) 3mm x 8 screws, which also hold the board in the cover. Trying to think of a better way because there isn't much…
BTT EBB36 Umbilical Strain Relief for Stealthburner Works both as a mount for the BTT EBB36 on the Steathburner CW2 but also has strain relief. Mix of two other makers models. Requires two m3 heat inserts 3 versions - 58mm, 65mm and 70mm…
This remix is based on the elegant Filament Rack originally designed by BTR3D . Big thanks to the original author for the simple and practical idea. Modifications I made: Replaced the 15 mm aluminum tube with a 3D-printed cylinder (up to…
Simple transport case for JBL Tune 500BT headphones. For hinge pin I used a piece of filament. Material: PLA Nosupport Layer high: 0,3 or lower
See Zip file for all files including STL & STEP. ---Citations: Inspired by the Recovery Tactical MG9 Angled Mag Pouch. ---Description: Holds a mag, at an angle. Designed for the Taurus TX22. Mag release is ambidextrous. ---Variants: A:…
I remixed this case https://www.prusaprinters.org/prints/20416-skr-bear-case to make room for the WIFI chip on a Bigtreetech SKR V1.4 There is 2 options V1 has the chip extended outside the case V2 has the chip enclosed inside the case…
A 2 parts mount for people using BTT SB2240/SB2209 CAN Bus board that are also using PG7 for strain relief. I didn't want a bend in my cable, so I made this from scratch. Note: I do not use a cable cover (didn't want extra weight) so the…
made the CAD light with less surfaces to be used for your design proses of building a case for it
This design is for HDMI5 V1.1 If you are looking for HDMI5 V1.2 mount, use this one: https://www.printables.com/model/926845-btt-hdmi5-v12-display-mount-voron Design intents There are existing mount for the HDMI5 but I ended up…
Print the front face together with the accents! Use supports for the door assembly (this is the most critical part!). Some thread inserts are also needed (see photos). I uploaded the CAD-files, so you can use them for modifying or…
Just updated the files to v2, enlarging the bolt holes to 5.5mm to accommodate a m5 bolt diameter easier. My wife needed a bta (between the arms) bottle cage riser for her 51 Speedshop cockpit on her tribike. Figured I'd share the design…
On my Voron 2.4r2 i have an BTT EBB36 v1.2 installed. Since the board is mounted on the back of the LDO Nema 14 stepper behind a ClockWork 2 the cables came extremely close to the drag chain when homing. Also the wires were exposed on the…
Elegoo Neptune 3 Pro Klipper Upgrade This page contains instructions for installing Klipper on your stock Elegoo Neptune 3 Pro and model to attach BTT Pi V1.2 inside printer's bottom housing. I wrote this instruction after upgrading my…
This Adapter adds a mount for the BTT Eddy. On the elegoo discord there is a project to support Eddy software wise. For Eddy itself there is no additional hardware required. Adapter mounts with stock probe-screw to the Shround while you…
Needed a bit more vertical clearance for the EBB36 on my StealthChanger build so I created this mount/carrier for it and also tried to get it as rigid as possible with just the two mount points. There are two versions, one where the EBB3…
I made this for my girlfriend who's a big ARMY ;)
Simple and fast to print. A little bit curved for better fitting and stability.
M4 version for using metal DIN rail clips (or 4mm clips) M3 version to use with 3mm (remixed) printed DIN rail clips from here:…
Für den Mk3s gemacht, andere haben evtl einen anderen Führungsstangen-Abstand. Ein einfacher Halter, um eine Messuhr an die X-Achsen Führung zu klipsen. Die Messuhr ist auf gleicher Position wie die Nozzle und kann händisch in x Richtung…
This is a silhouette ornament of BTS. Very easy to print, no supports needed, the back slots into place securely. Print more than one back so that you can change the mood by changing the background. @3DPrintBunny
BTT SKR Mini E3 4010 Fan holder. (For voron V0.1 or other printers) -3x M3x25 Screw for board and holder. -2x-4x M3 Screw for fan fix (length depends on the fan) -Ink. STP Assy. for Remix. I use for V2 but its work with v1.2 and v3 also.
Summary After a make of my previous model Led Light (Crystal on Rock) - USB powered was posted with the use of multi-colored LEDs, I decided to do more with this. It kind of ignited my imagination.... The model now presented is the…
Easy to print Print instructions Rafts: Not needed Supports: Not needed
Tested and useable display case to be able to use the Bigtreetech HDMI5 Display in version 1.2 (Backside connectors) with the Sovol SV08 printer. ## Print settings * 4x Walls * 5x TopLayers/Bottomlayers * 20-40 Infill * Tree support
.2 Layer height Whatever infil but I did 20% No supports needed 5 M3x10 socket head screws 4 M3 heat set inserts 4 M3x6 button head or socket head screws
This is standoff to mount the BTS7690 Driver Board with 4mm screw holes, mounting up and upside down possible If you want to mount it upside down, put the connection pins in the spot where the support beam is missing.
Prints well with default settings. Be sure to print 2 feet and 1 arm. Push the arm pegs into the holes in the feet. They should fit snug but if they don't, try adding a drop of glue. Updates v1.1: Increased stealth factor by 50%. Made…
Lightweight mount for the EBB42 toolboard directly mounted to Bondtech LGX. Suggested printing with a material with good mechanical properties (e.g. PC-CF) due to the thinness of the part. BOM 1 x Bondtech LGX 1 x BTT EBB42 4 x…
Heya - this is still a work in progress. I wanted an alternative to the huge BTT Octopus case from https://www.thingiverse.com/thing:4883809 and decided to remix the case from @InnovationWorkstation. Thanks for providing the step files! I…
Removable BTT HDMI7 Screen Case Can swivel and screen can be easily removed and slided back in. Included a knob to tight the screen in the correct orientation. Printer RatRig V-Core 3.1 Infill : 15
BTS Headphone Stand Would make a great gift. Easy to print, slots together. no supports. Stands just over 20cm tall Are you a fan of a different KPop group? Would you like me to design a headphone stand for them? Let me know in the…
This model is made of three parts: BTT Pad 7 Bracket. Simply slide the pad in the bracket, tight fitting but still removable. Square part for attaching to Neptune 3 Pro. This part allows to adjust viewing angle within 15°. Duck Throne.…
Just separated for those who does not have CAD software
use vhb tape for antenna
update 05/20/2026: Rev 1 is the original file Rev2 I made the band 1mm taller in the z direction to add a little more material around the head and threads of the screw Rev 2.1 has a 5% smaller inner diameter requested by bob92553 About a…
If you like me parts, you can also support me here: https://buymeacoffee.com/andretheengineer :) I remixed this part, because the original was great by design, but was missing a strain relief. so here it is. also use the original or 18mm…
3030 Tslot Aluminium Profile 4 sides open Adjust the Z scale to obtain longer profiles All our designs are free to download and use. Your support fuels our creativity, if you download/enjoyed this file, please leave a like. Thx
Later edit: I have added a 20mm tall version i prefer the 25 because i can easily remove/insert the Neopixel and Det Plug for the 20mm version you will need M3x25mm instead of M3x30 If you want to but this Board here is an affiliate link…
