Counting matching models…
Remix of my original mouse bungee with added cut-outs for 12mm diameter bumpons for desk. Added STL for people who want to edit this. Print Settings 0.2mm, Brim, 80% infill Notes: Rotate 220 degrees on the Y axis so the top of facing the…
Looking for a smart way to hold your mouse cable in place? Try this mouse bungee! Just print both files, put the cable in between and screw the parts together. You can use double sided tape to fix it on your desk or a M3 screw to place it…
This simple and stylish device holds your computer mouse cable above the desk, making use of the mouse more comfortable without the cable dragging around. Additionally, it has storage for the excess cable in the base, eliminating some of…
Molle MultiFix : for the well-known molle system, this offers a lot of individual application options. You can use it with paracord, bungee cord (rubber band) or any rope you have on hand. Simply thread the paracord and you can attach…
This is a remix of an old injection moulded model I found. I printed in ABS for strength and environmental resilience, but would probably work with PLA, PETG, etc… The bungee/shock cord goes through the hole at the back and is pushed down…
This is an adjustable bungee hook. The blue and yellow hook works with a 6mm bungee rope. The black one is a 3mm bungee. Just scale the hook 50% down in your slicer to fit 3mm. Scale the hook up or down for each type of rope you have.…
Introduction This is a printable mouse bungee that mounts to the back of your desk by an included screw. It helps keeping your mouse cord from getting tangled into the back of your desk or other stuff on it. The model does not require…
This Thing lets you convert a piece of bungee cord into a general purpose adjustable, secure, yet easily undoable elastic fastener. They are often used to attach a bicycle to a car bike rack, but can be used in plenty of other situations,…
These adjustable bungee cords are the bees knees. You can cut a bunch of 6mm bungee cord to 24-36" and slide the hooks to what ever length you need. I use these things for everything, Will they work as well as a metal bungee cord, likely…
The Bungee Carabiner lets you use your keys without removing them from your belt loop / backpack / etc. so you will not lose them and never have to worry about dropping them. After pulling the keys out, simply pull on the slotted part of…
Adapters to replace Mares Genius dive computer strap with bungee cords. Initial design using nylon block and file by fellow dive club member Alex P. Print instructions Printed in TPU98. Infill: 40%. Perimeters: 4
A little remix of TomHoyleDesign's model that allows you to fix it firmly to your desk.
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Bugsnax inspired, Bunger, Tabletop DnD miniature 25 mm medium base which can be used for DnD and other Tabletops.
The Bungee Carabiner lets you use your keys without removing them from your belt loop / backpack / etc. so you will not lose them and never have to worry about dropping them. After pulling the keys out, simply pull on the slotted part of…
It gives you a better grip to pull the bungee cord off the magazine. should work with any mag pouch that uses bungee cord keepers. I printed it with fuzzy skin in PrusaSlicer to give some texture to it to help aid with grip.
After a couple of dives I found out that I hate the watch type strap on my compass. OpenSCAD to the rescue! :-) The mount is designed for 3mm bungee and lets you put it on while loose and pull the cord from the back to front to tighten…
I recreated the bungee balls that our boy scout troop uses to tie down the dining fly to the frame work
I designed some removable clips to attach the “flushing” spray to my Trobolo mobile dry toilet. Can be used for any Auer Euro boxes. They have a cone on the back to fix them in a vertical section of the box. Easy to clip on and off for…
Initial version of this was one of my first self-designed products shortly after acquiring my printer. After a few months of design and print experience, and failures of my original design, it was time to re-visit this. The new design is…
The mouse cable is secured to the tip of the spring using zip ties, and the spring is fixed at the desired angle using M3x14mm screws and M3 nuts. I recommend the following three methods for securing it to the desk: Use double-sided tape…
UPDATE: 30/01/2021 V2 - same design but have some details ( Wife request :P ) Base V3 - work in progress but is a bit crazy, is compatible with any top part. Another add-on for my desk, mouse cable is somethings that is always on the way,…
Used for break fencing paddocks when connecting a “hot” electric wire to a inert wire. This isolates the live wire from whatever you connect it to (usually a non live wire). Print Settings Setting Walls 2 (min) Layer Height 0.2mm Nozzle…
Allows to make secure tie down that clicks into the cleat. Simple knot on the other side, improved slide surface for easy feeding in. Use 6mm cord line, infill 100%, 0.2mm layer, no brim with slowed down first layer on textured plate for…
Bungee cord hook can be resized for different cord sizes.
for more info see original model https://www.printables.com/model/90240-mouse-bungee
This Shearwater Teric bungee mount is created to provide a secure and adaptable mounting solution for the Shearwater Teric dive computer. It is engineered to accommodate a 5mm bungee cord , ensuring a secure and adjustable fit for your…
Turn a spare few cm of your TPU filament into miniature bungee cords. You can make a straightforward bungee cord with two hooks, make a simple strap with one buckle, or mix-and-match to create any manner of web or net. The unique E-Z…
Hi there. I have been frustrated by my Switch controller many times while traveling. After a long day of going places and doing things I just want to unwind with some Rocket League or Tears of the Kingdom, but I always find my controller…
I print it in PETG and recommand to use 4 M3x6 or M3x8 screw.
Hi threeD Printers, This Mouse Bungee attaches to your monitor using strong adhesive tape, eliminating mouse cable tangles and drag while enhancing the cleanliness and fresh appearance of your setup. It's designed to be partially printed…
This is used to make an eye in the end of bungee cord and comprises two parts - the bones that secure the cord, and a slip-on cover. It can easily be removed, adjusted for size, or reused. There are 3 sizes supplied for 3, 4, and 6mm…
Printed using PLA+ Make the loop from 6mm bungee cord, and secure with a cable tie, as seen in the photos. Cut the bungee to length to suit the size of your bundle. These can be used for securing your hoses, sullage pipes or power cords…
Printed in Prusament PLA, GCODE attached takes 4.5 hours to print two side by side, with supports. For use with 2mm width screws (drywall screws), simply screw the fixture into the wall, and hook up your bungee cord to both hooks to hold…
Bungee mount for DL07. Update: Now in version V2 with wider base and deeper holes for the bungee knots Update: In version 3, the thickness was increased so that the nodes are completely hidden in the holes. Feel free to leave a like or…
An adjustable bungee hook for many types of attachments. smaller hook than the original model
MOUSE BUNGEE Works for 16 to 20mm thick desks. No screw no glue
Bungee mount for the Suunto SK8. It is very tightly constructed. But the inner holds very well in it. You have to fiddle a bit to get the whole thing together. If it is too heavy for you, simply increase the scaling in x and y a little.…
Slim bungee mount for my VTL3500P BigBlue dive torch. Additional material: 1x screw M3 x 15mm 1x washer M3 10x1mm 1x bungee cord 4mm See my goodman handle for this torch: https://www.prusaprinters.org/prints/33673-bigblue-goodman-handle…
A hook so you can carry a bag with you on the scooter. Additionally there is a hook for a bungee cord, to keep your bag in place.
Works best with a bungee cord approximately 8 mm in diameter, of any length. One end must be crimped to itself or otherwise need something to make it a fixed end. Extremely useful for tying stuff down. Can be much better than the standard…
This is a simple bungee cord hook that allows you to turn some 3-4mm shock cord into a custom bungee cord. I use bungee cord to hold my hiking back into the back of my car. my old bungee cord broke but I had some old 3mm shock cord laying…
8020 1010 1"x1" curtain or bungee sliding attachment point
Mouse Bungee. Optional: Hollow version For Adding/Removing Weight, I used steel balls and silicone. Add “100% Silicone grease” to the threads for a smoother operation. Add Velcro to the bottom for noise reducing or for more attachment…
Bungee ball bracket for patio shades. I designed this so I could have bungee ball holders at different heights. Mid height allows you to see your yard but offer privacy. Lowest height helps with weather protection. The replacement bar end…
I really liked similar hooks on my old Osprey Quasar so I made more of these to use on other bags with bungee cords/webbings. It makes much easier to hang, say, a jacket: just unclip the hooks put the jacket on and clip hooks back. Note…
After some extensive searching, it took a while to find a way to add “attach points” to my backpack to be able add some bungee cord without permanently modifying or damaging the bag. There were no printable models that did quite what I…
To keep it simple, I modified the design to include features of commercial mouse bungees and other 3D printed mouse bungees; a stable heavy base (~250g) , cable held up and away (~100mm height) by non damaging rubber jaws & non-slip feet…
Printable bungee based on Pulsars micro bungee, use some double sided tape to attach it anywhere!
Sizes: M12, M16, M20, M25, M32 and M40 Recommended layer height: 0.1mm (for smoother movement of the threads) If you need an adapter for special configurations, click below. ⬇
Bungee mount adapter (6mm) for Aqualung i330r dive computer. Allows you to mount your dive computer on 6mm bungee cords. Enjoy
Ein paar einfache Schoner für Schraubstöcke mit 100mm Backen mit Einkerbungen für Rundmaterial. Die Schoner passen bei mir so genau, dass keine Magnete benötigt werden.
Mouse bungee, print base in PLA/PETG/ABS/ASA and arm in soft TPU (i used Filaflex 70a). (printed with 0,6mm nozzle 0,2 mm layer height, arm 2 walls 20% gyroid infill, no supports) edit: added v2 base (arm mount with 2x M3x8mm screws and…
Adapter that allows you to mount the Garmin Descent MK1 diving computer using bungee cords. A perfect solution if you want to use a computer, e.g. with a dry suit. Print with pet-g. I recommend the filling 100%
You will need 11mm wide double-sided tape.
After buying a dry suit I realized that my D6i dive computer will not fit on my wrist compfortably, even with the wrist strap extension. Therefore I made this adaptor to securely mount the computer with normal bungee cord. The holes are…
Notes rev 1 & 2 are sized for a 700 x 20-23 mm tube rev 3 is sized for a tube that is about 47 mm flat, probably a 26 x 1.5" tube Parts below printed in Tough 2000 on a Form 3 as of 2024-02-18, both rev 1 & 2 do experience some slippage…
Simple, generic, bungee wrist mount for Bottom timer or computer. Fits computers 55mm wide by 24mm deep. Print Settings Rafts: Doesn't Matter Supports: No Resolution: Normal Infill: 100% Filament: Any TPU Any Notes: Flexible Filament of…
A hook so you can carry a bag with you on the scooter. Additionally there is a hook for a bungee cord, to keep your bag in place. This is the 2nd version of this design, this has a carabine hook. This way your bags won't fall off.
Mouse Bungee F2 holds the mouse cable to move it freely. Work is in progress. I must make it heavier and more adherent to the desktop surface. It can be tested using double adhesive tape. They are 2 pieces printed in PLA connected by 2…
Got a nifty cargo net for my truck last fall, but over the winter several hooks broke(they apparently disagree with -40 degrees, and lots of ice). I could get a new net, but this one was free, and why waste something I can fix? Simple…
The original model didn't work for me. For some reason, the hole in the base was far too small for the arm. I also wanted a bit of springy action from the arm (got that portion of the model from this clip model:…
This is a set of parts to repair/replace the bungee anchors and endcaps for a porch rolldown sunshade. Mounting holes made for #6 wood screws. Bungee not included. Print Settings Rafts: No Supports: No/Yes (Needed for pipe endcap)…
Print with no supports. Prints flat, with pull force in line with hook center and layer lines that form loops, contributing to strength. PETG recommended for durability, shatter resistance, chemical, gasoline, and solar radiation. Use at…
Use with any standard elastic.
Mashup of 2 or 3 versions of a bungee cord/rope hook I've been working on for a while now. I liked the alligator grips of some store bungee hooks but didn't like the retainer width and the hooks were weak. So I modified them to what works…
This tiny little buckle is designed for use with 1.75mm TPU or other flexible filament to create quick, reusable straps for bundling cables or other items. Stretch the TPU as you pull it into each groove and it locks in place. The 4 slots…
Bungie ball ends for use with 3mm bungie cord. Thread the loose ends of the bungie cord through the holes, tie them off together, and tuck them back into the cavity in the ball. Use it to wrap up cords or fasten tarps to support poles…
Printed in PLA with 50% infill, no support are needed.
I didnt like the color of the preinstalled elastic laces on my skechers so i cut them out and replaced them and made this to finish of the 2 ends. Required hardware: 6mm - m3 countersunk bolt and nut. like this:…
Convert your fins to Bungee and you will never go back. You can print a heel strap (there are a couple out there) or use tubular webbing for that cool Salty Diver look. I used PTEG because of its ability to withstand the elements better.…
EN: A simple bungee cord cable organizer made from 4mm bungee cord and a couple of knots. FR: À simple sandow à boule pour organiser tes câbles fait avec 4mm corde élastique et deux nœuds au bout du câble. ES: Un simple organizador de…
It is recommended to print the parts with a layer height of 0.1 mm so that the threads can be printed more precisely. Otherwise the threads could get stuck. ⬇
A simple automatic servo controlled trigger mechanism for bungee plane launcher The "crossbow style" trigger mechanism is controlled via 30kg RC servo This "e-pedal" can be controllerd electronically by any micro controller allowing to…
Bungee links for the Aladin dive computer. Replacement for the bracelet. Print instructions Category: Sport & Outdoors Summary Bungee links for the Aladin dive computer. Replacement for the bracelet. Print Settings Printer Brand: RepRap…
I make a replacement for Gallileo Luna Diving Computer. It Works with a 3mm Diameter Bungee Cord
Draw, write, and doodle on the go with this handy 3D printed pen! The attached bungee cord allows you to clip the pen to your belt, bag, or really anywhere else. See more at: Instagram: @3DBrooklyn Facebook: 3D Brooklyn 3DBrooklyn 3D…
Print using any material you're comfortable with. No supports needed.
I designed these to use with my Motor Home tarp so I could use a rope and / or Bungees to Adjust tension on the Tarp.
This is a model similar to the bungee clips (not sure what they are really called, feel free to correct me) that come on my sundolphin kayak. Included models with and without supports. Category: Hobby
Need parts for your Bungee Grabber for your Longarm Quilting machine? This design will allow you to print everything you need minus the (2) torsion springs and (2) M4x6x6 heat set threads. I have never located a source for the springs. I…
A simple bungeemount for the Subgear XP10 dive computer. Print, clip in and insert 4 mm bungee cords at the desired length. Print instructions Category: Sport & Outdoors Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 20%
This is my first iteration of a cup for my bungee straps I use on my Jet Fins and on my Mares fins. I use 1/4 inch bungee with two zip ties to form a loop for a one size fits me quick strap. Similar to the stainless springs that cost 60…
This is a simple device for clamping 10mm bungee cord, especially when the cord is being used through a hole to fasten something. There are 2 printed parts, plus a suitable spring - around 10 - 14mm diameter, and 5 - 10mm long. The spring…
This is a Goodman Handle with bungees for the Sofirn SD01. The design has already been tested over months and found to be good. In the back, another bungee is pulled through the lamp to fix the rear part on the arm. Feel free to leave a…
A pair of compact clip/bracket pieces designed to hold 6mm (1/4") elastic bungee cord inside a recessed wall niche. Each bracket has two holes for the cord to pass through, creating a tidy and functional storage solution for lightweight…
Original design: https://www.thingiverse.com/thing:3775086 You need 6mm springs rather than 7.
This is the winglet, and a hook for bungee launching, for the TBS Caipirinha 2. The winglets are an exact replica of the coroplast winglets in the kit, but with sealed edges and more strength. They only weigh 5 grams more than the…
I made these to hold my fishing rods in my truck cap. The bungee balls I used came from the Dollar Store. They would probably work great for various applications like hanging garden tools or anything you can imagine. Enjoy.
A hook to add different heights of adjustment on your outdoor shades/blinds. no supports needed, PETG recommended.
An easy replacement for a mouse bungee to prevent your mouse cable from falling of the table. big diameter is 7,5mm small one for the mouse is 3mm. i think this should fit moust mouse cables. I use it for a Corsair K70 and Logitech G502.…
Transform your standard Cressi “wrist‑mounted dive computer” into a model with a bungee attachment. If you’re printing with PETG and the holes or cutouts turn out too small, scale the model to 101% on the X and Y axes. The Z axis should…
I have a large foam floating swim mat at my lake cabin “Aqua Lily”. These come with a plastic grommet that has a bungee cord attached so you can connect it to the dock or tie it to an anchor to keep the mat in place. The grommet is on one…
The X-Max (X-Plus) heated bed cable can get stuck between the Z-Axis limit switch and the bed leveling the bed. This small print gently pulls the cable away from the limit switch to minimize the likelihood. It hooks on the back left frame…
A "mouse bungee" to hold the mouse wire in place. Print without supports (are included in the model). Glue the pieces.
The ball should be printed with support for better bed contact.
A simple mouse bungee that is quick to print. All print settings are in the 3mf. No supports needed. Printed in PETG. I used ¼ inch nuts for ballast but any suitably heavy ballast will do.
This is a pull tab that can be threaded through a 6mm bungee for assisting in pulling the bungees over your sidemount tank valves when using bulky dry gloves Printing Instructions Filament: TPU 95A Infill: 100% Support: None Brim: None
A simple design for a ball to make a bungee cord for tarpaulins, camping gear, canopies, flags and other items. Works with 3-4mm bungee cord, simply push a loop through the hole and secure with an overhand knot inside. I printed mine with…
Triple and quad buckles for the Micro Bungee TPU parts.
During my vacation this summer, I lamented that I could not organize all my stuff in my little camper. In remedy, I came up with this. This bungee wall mount will hold your phone, e-reader, walkie-talkie, dirty shirt or whatever you can…
