54 models
Simply a mounting bracket for the CC1101, the bracket press fits against the dupont connectors and is hot glued into place. It is a evolution of @Oliverkayak mount model.
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Case for my CC1101 attachment for Flipper Zero and Spacers. Use some white filament and flatten it for the led diffuser. Printed with eSUN PLA + Black on the below textured sheets Smooth Triangles https://s.click.aliexpress.com/e/_mrFsNmm…
Hardware case for ESPSomfy-RTS Project by rstrouse (thanx!) Integration for Homeautomation (as e.g. Homeassistant) for radio controlled Somfy Shades, Blinds pp. >> Project see https://github.com/rstrouse/ESPSomfy-RTS Case is for using…
Case for ESP32 Board (NodeMCU V2, Attention: only for the one with Mounting Holes!) and CC1101 Transceiver. Toolless assembly.
By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in the future. Main features: free space in the shell for other modules; fastening only with magnets (8x2 mm); holes for…
I have made a custom slim case for my external SubGHz module for Flipper Zero. There are various types of SubGHz modules for Flipper, so please check the link below or the photos to make sure it fits yours. I have printed mine using a…
It needs to be printed on SLA resin printer. FDM not tested.
This is a case for the newer ESP32 Devkit V1 with the USB-C port. Dimensions must be around 52mm x 28mm. This case allows for the use of Dupont connectors, rather than requiring soldering. All wires can be stored below the ESP32. I used…
A LilyGo T-Embed CC1101 Body with dual SMA antenna holes. This is the stock body part and is not optimised for FDM., so it will require well-tuned support setting.
https://www.reddit.com/r/flipperzero/comments/11s77sw/fully_unofficial_external_subghz_cc1101_module/
RP2040 + cc1101 in one chassis. The device is working with cc1101-tool firmware from github my fork: https://github.com/McGr3g0r/cc1101-tool my new tool: https://github.com/McGr3g0r/cc1101-wizzard most recent FW+apk:…
Work in progress version. Needs a few tweaks here and there, STEP files are included if you want to make changes. Hardware: M2.5x16 screws (ISO4762/DIN912) - 4pcs M2.5 heat set inserts, 5 or 6mm long - 4pcs M2.5x5mm flat head screws for…
LilyGo T-Embed CC1101 is a cheap alternative for flipper zero,but there is one small issue:there is no power switch for device.Even works in deep sleep mode,the battery drained in two days. So I modified the official shell to add a power…
1 version - with magnets 6x3 2 version - with screws, but without a hole for the switch 3 version - without magnets By increasing the thickness of the shell, it was possible to place external antennas and leave room for other modules in…
The main board case uses 2 M3 screws. You will need to use a tap and die set to get the threads nice. The CC1101 case uses a single M3 screw. The NRF24 case uses a small blob of super glue to ensure the case stays together. Print in…
This is a CC1101 case to use it with the M5Stack Plus 2.
Flipper Zero NRF24 Case & Window CC1101 Remix for NRF24 Antenna Added space for Antenna Space for module pins
Case for usb cul stick adjust it with the scad file Print instructions Category: Electronics
Just a simple remix.. For people who only has the standard sheet and want something nice aswell ;) I removed the hole for the LED aswell, because i didnt have an intention of using it. I will do more variations on request. I was thinking…
A quick case I put together to fit the CC1101 expansion board made by TehRabbitt. The board can be purchased on Tindie here . The board is designed to be used with the Flipper Zero, which can be found here . To assemble the case, you'll…
here is a cover for LilyGo T-Embed CC1101 that you can choose yourself what color it should be instead of the standard cover that comes with it when you buy it This also saves you from having to destroy the original antenna to retrofit…
Took the model from fkm492, added screw holes for the C1101. Keeps the module better in place, with the antenna weight.
I made a CC1101 for my Cardputer ADV following Ray J's tutorial on YouTube and decided to design a case for it. Here's the tutorial on how to make the CC1101: Can be printed without supports. I believe the spacers I printed for the device…
Case for the D1 mini clone and CC1101 with "rubber duck" antenna. Based on @RobinsBlog_de design, but I wasnt happy with a few things, such as the weird bottom and the hole on top not made for the rubber duck antenna. Using this to…
Płytka ESP32 DevKit: Polecam wersję z portem USB-C dla wygody. Uwaga: Jeśli masz stare układy ESP8266, w tym projekcie ich nie użyjemy – nowa wersja komponentu wymaga ESP32, który jest szybszy i w pełni wspierany. Moduł CC1101 (868 MHz):…
крыша tembed Магниты 8Х2 ММ Добавил пару отверстий для выключателя по запросам, если что то не совпадает пишите в коменты Я не тестил крышку с выключателем Если вам не подходит сторона выключателя B просто отзеркальте модель , она…
Remix of the original “LILYGO T-Embed CC1101 back shell with external antennas” by dansh with 6x3 magnets
Full description and BOM on my GitHub: https://github.com/olekrause/t-embed-cc1101-plus-GPS-Addon This project adds an ATGM336H module to the LILYGO T-Embed CC1101 Plus Printing suggestions: - Print in PETG - Auto orient the model -…
A case for a cc1101 sub-GHz signal extender, plain and flipper models. Needs 4 m3x10 and 2 m3x5 bolts
Simple case which accomodates bith ESP32 S2 Mini and C1101, to be used for ESPSomfy-RTS. features: dimensions (L: 61.85, W: 25.95, H: 27mm) mount for C1101 with screw holes venting holes on each side supports for S2 Mini on both sides and…
Want to turn your Flipper Zero into a Tank? Well all you need is the FlipperHub Sub-GHz Booster module 2.0 and this file. The module in question is to be found on Tindie. The case just slides onto the board and holds the module securely,…
Case for CaracalDB Mini CC1101 Add-on board for Flipper Zero
This boot cover is made to fit my Flipper Zero - CC1101 Board by TehRabbitt case found at the following locations: https://www.printables.com/model/606834 https://www.thingiverse.com/thing:6122121…
This case is designed specifically for the 38-pin ESP32 (ESP-WROOM-32 with CP2102 USB-C) development board. If needed, you can easily modify the dimensions to fit a different board. This is a fully parametric model—at least, I hope it is!…
⚠ Atenção – Modificação necessária no CC1101 Para utilizar esta case, é obrigatório alterar a posição do conector de antena do CC1101 de horizontal para vertical . Essa mudança é necessária para que o módulo encaixe corretamente no espaço…
1 x CC1101 module (https://aliexpress.ru/item/1005006427856868.html) 1 x 5v to 3.3 (https://aliexpress.ru/item/1005004680123549.html) 3 x 16x2,5 screws
Remix of case made by RJ019 with closed bottom. Two options with sharp and smooth edges. In case there is any upwards wobble that annoys you (might be there depending on how you have built the board) - add some support to the top of the…
This model is a case for a cc1101 module, should be mostly standard, but providing the FreeCAD file so make minor modifications easier. Case has 2mm walls and posts that can slot into the module to help stabilize it. Antenna connection…
This is a work in progress, this case will fit you're Lilygo CC1101 Plus that has the external antennas (the latest model) See my other prints for this new desk / display stand…
Case and Pin Protector for CaracalDB ESP32 NRF24 and CC1101 Add-on board for Flipper Zero
This is a case for the Waveshare ESP32 ETH POE kit. It could probably use some more tweaks, but it let me get my RF Proxy into a case relatively easily! Here is the original design in OnShape . I used this setup to make an RF Proxy using…
Case and Pin Protector for CaracalDB ESP32 GPS and CC1101 Add-on board for Flipper Zero
did a little remix and added bruce to the back of case for a little flair.
Description EN Meet the Elegant Case Enclosure for PINGEQUA Forget clunky, standard enclosures. This case was designed for those who appreciate premium aesthetics, satisfying tactile mechanics, and high-quality finishes. Tailor-made for…
compact case holding a esp32 wroom dev board plus cc1101 in the most compact way, by building a sandwich. see pictures for details. can be used for espsomfy or to control other 433mhz devices
Weather station case for an esp32 D1 mini and a RF receiver. Project repository for the hardware: https://gitlab.com/raupulus/esp32-weatherstation-bresser-read-868mhz-cc1101
This case has an opening in the back to allow space for the pins for when using it without the flipper.
Case for external module for Flipper Zero
This model is a case for a cc1101 module, should be mostly standard, but providing the FreeCAD file so make minor modifications easier. Case has 2mm walls and posts that can slot into the module to help stabilize it. Antenna connection…
I made a CC1101 for my Cardputer ADV following Ray J's tutorial on YouTube and decided to design a case for it. Here's the tutorial on how to make the CC1101: Can be printed without supports. I believe the spacers I printed for the device…
This case has an opening in the back to allow space for the pins for when using it without the flipper.
⚠ Atenção – Modificação necessária no CC1101 Para utilizar esta case, é obrigatório alterar a posição do conector de antena do CC1101 de horizontal para vertical . Essa mudança é necessária para que o módulo encaixe corretamente no espaço…
⚠ Atenção – Modificação necessária no CC1101 Para utilizar esta case, é obrigatório alterar a posição do conector de antena do CC1101 de horizontal para vertical . Essa mudança é necessária para que o módulo encaixe corretamente no espaço…
