Counting matching models…
IMPORTANT NOTE: 3D-printed plastic screws will break. Because of the way a 3d printer works, and the way the screws are typically oriented during printing, they are very weak. Things like printing in PETG, adding more perimeters, and…
Screwless Snap Assembly. Start with base or bottom case, remove ssd and drop Pi4b board into bottom case so that it rests in provided IO openings correctly. Fit should keep board in place even with a little shake. Place…
With this mod, you can place Creality's Nebula camera on your Ender 3 V3 KE without the need for screws or similar parts. Inverse Version: Simply rotate the camera 180º on its own stand to invert the image, no need to make any adjustments…
This is a standard camera screw, as included with most tripods. The knurled headplate is a real stress test for FDM printers. ;) Due to the tiny dimensions, I recommend printing it using the highest resolution/lowest layer height your…
✅ little support material is needed if you lay it flat on the print bed. ✅ Layer height of 0.2 mm is sufficient for a clean look. ✅ PLA is great, but it looks even more classy with matt or semi-gloss filament!
I needed a method of connecting a "webcam" to my printer for remote monitoring from around the house via Octoprint. So, this comes in a couple pieces: A connector that snaps to the 30x30 extrusion frame (Y-axis on Prusa, and possibly…
BUILD VIDEO PUL has created a nice build video : UPDATES 22/02/2025: Standaard Feet and BasePlate Thanks to the work of RuppiLab3D, we now offer an additional option to use standard feet and a standard CNC-made baseplate, allowing for a…
Camera mount that attaches to the aluminium extrusion of the frame of the Prusa i3 MK3/MK3S. The mount should fit any webcam with a 1/4" tripod mount by using a 1/4"-20 screw. The clip might interfere with the Y carriage bearing if…
A remix of Sneaks excellent ‘Articulating Raspberry Pi Camera Mount’ -camera housing to suit the new v3 Raspberry Pi camera. The V3 camera has a much bigger sensor and comes with autofocus- quite a big upgrade from the V2 camera. However,…
This model uses 22 links, 22 covers, 1 end, and 1 start. I printed mine from PLA. Some supports are needed on the start and end. This chain clips into the aluminum extrusion under the printer just like the existing wire managers. Thread…
The camera on my k1c was not perfectly centered so I redesigned the bracket with an angle of 10 degrees. It replaces the original one, just unmount the whole camera (1 screw) disassembly and replace the original bracket with printed one…
This case is intended for the Articulated arm mounted on the Original Prusa printer.
Fully open source STEP files Please remix and share alike I'm sorry that all the files are not better sorted, labelled and optimized. 6x12 is designed for Fujinon SWD 65mm lens 6x17 is designed for Fujinon SWD 75mm lens 6x24 is designed…
Update 08/02/2023 - I have added a ‘Wide Angle Camera’ version, the lens has a larger diameter than the standard so will need to be taken into consideration on some designs. I don't have a physical v3 wide camera, and have just gone off…
Camera or webcam mounting screw based on the dimensions of a 1/4" - 20 UNC fitting. Designed to be easy to print, no supports needed and will print at 0.20mm with minimal retractions to help provide a cleaner print. The screw is based on…
If you used this part consider leaving me a small tip using the below links! https://www.buymeacoffee.com/wafflecart https://ko-fi.com/wafflecart Silhouette cameo 5 roller replacement parts. This can be used to replace the parts on the…
Print with MINI or MK3S Z=0,3 brown color Suggest to use my special designed tool to easy remove Camel from plate: https://www.printables.com/model/106791-blade-holder-for-remover-tool Cut joiners and build it.
I wanted to print my own nuts & bolt for my camera and tripod. With Fusion 3D it is very easy to create them, but once you print you have to consider also tollerances. I tried few times and at the end I found that you have to reduce the…
Edited 09/27/2026 By user request, I added PIP clamps in 42 mm, 44 mm and 46 mm diameters. They are available only in the unmarked version, in the Pipe Clamps (second version, PIP, unmarked) folder. Edited 06/06/2025 I’ve added a custom…
Need a knurled 1/4-20 camera mount screw? Here you go! If you want to customize further, I have included the Onshape document link. 3 models are available: Small: screw length - 0.335 in (8.5mm) Medium: screw length - 0.571 in (14.5mm)…
This Buddy3D Camera mount is compatible with XL and XL Enclosure. How to guide: https://help.prusa3d.com/guide/how-to-set-up-a-buddy-cam_385017 Recommended settings: Default 0,2mm layer height profile, PETG filament, supports are not…
This mount allows you to quickly and securely attach your camera to the shoulder strap of your backpack. Using this mount you can access your camera at any time during activities such as hiking and never miss a moment. These types of…
My Website This is my custom-designed Dart camera setup with an integrated light ring. I printed the whole setup on a Bambu Lab A1. The problem with other setups is that I hit the camera on top when trying to throw a double 20. User…
A camel I made for use in a nativity scene. Check out the wise men. The Three Magi / Wise Men by Peter Farell | Download free STL model | Printables.com
Wanted to make LED ring and Camera mounts for my Dartboard Setup which was easy to print. This design is adapted from this website (https://docs.autodarts.io/3d-printing/). Github for autodarts is https://github.com/autodarts Discord…
Version 2 - moar magnets: After feedback about the camera not sticking - probably due to weaker 6mm x 20mm x 2mm magnets than the ones I had available, the model was revised with the following changes: The 6mm x 20mm magnet is…
This model has been verified for compatibility using a GoPro Hero 4 case. It is not an official GoPro part — geometry recreated for functional interoperability. Dimensions: Diameter (x, y): 29.5 mm Height (z): 17 mm Hole size: M5 screw &…
This is a mini tripod for cameras. WHY? I wanted an small tripod that would be able to carry a DSLR in portrait and landscape mode. Many 3D printed tripods where either too small or not stable or didn't support portrait orientation. So I…
Simple sliding cover for your laptop camera. Use thin double-sided tape to attach.
They're easy, they're cheap and they can be a lot of fun: disposable cameras. If you still got one around, you can remove the plastic lens from the camera housing and print a lens holder for a Sony E-mount camera. All you need is a bit of…
Remixed this camera mount for the Ender 3 S1 Pro. I redrew this file to fix a slicing issue I had with thin walls around the screw. This remix allows you to attach a webcam that uses ¼-20 threads to attach to mount. You can either print…
Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers. Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.…
For the 2025 Tesla Model 3/Y, a shield around the camera was added . This is a remodel of the Model Y 2023 Berlin custom version that: Smooths out the walls to be circles instead of polygons. Fixes the bottom part of the shield not being…
Camera lucida. the 200 year old optical device used to create accurate images before cameras existed. Brought back into the spotlight by Pablo Garcia over a decade ago I learnt about the tool for the first time a couple of months back.…
Made specifically for the creality nebula camera for the ender 3 v3Ke and the se with nebula smart kit. The mount Clips tightly on the rail and the base allows the camera to pivot in all four directions, the clip can be positioned low…
TLDR Raspberry pi camera mount for the voron 0 / voron 0.1 Get up close and personal with the nozzle & the print bed (>80% visible) Easy mounting with 1 M3x16 screw, 1 M3 nut and 1 M2x6 screws NO PRELOADING OF NUTS thank goodness! No…
Cameras are attached to tripods and such using bolts in the American Unified Thread Standard , specifically UNC 1/4-20. Historically, the more colourfully named British Standard Whitworth thread was used, but market forces in my…
This is a remix of The Standard 4x5 from Standard Cameras ( https://standardcameras.com ) and has been shared with permission from the owner Drew Nikonowicz ( https://nikonowicz.com ). The bellows and ground glass needed for the camera…
Give it a like! 2/11/25: TLDR: print the “camera shield g lower.stl” version. Chamfer the inner base edge slightly after printing to better match the radius on the camera. No longer a quick and dirty version. I have added a new version…
Hi! This project is a medium format to be used with Mamiya Press lenses. I uploaded a photo taken with this camera. A Fusion 360 file is attached for you to be able to modify it. The information related to this camera can be found in…
1/4 zoll Schrauben und Muttern für Kameras und Stative. Die langen Schrauben können mit FreeCAD auf die benötigte Länge gekürzt werden.
This Buddy3D Camera mount is compatible with MK Family and MINI standalone printers including MK Family and MINI in the enclosure. Please note that magnets for using the camera mount in MK & MINI enclosure are recommended. Magnets prevent…
Raspberry Pi Camera Module V2.1 8MP Mount for Prusa Mini and Mini + and OctoPrint. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. UPDATE: I have added another version with X…
Film photography has survived and thrived in modern times; I fell in love with film from the get go. Because of it’s capability to create high quality prints I was drawn to it, and this eventually brought me to the 4x5 format; an…
Description Here is my Articulated Camel . A model with 15 flexible joints that prints in place without support. It is modelled after the Dromedary Camel . Included in the model is a number of brim structures to help with bed adhesion…
Why buy multiple filters for all your lenses when you could buy one filter and reuse it for all your lenses. You just need this simple adapter. I've included the two sizes I needed (step-up 49mm to 67mm, step up 43mm to 67mm) which I have…
This adapter allows you to mount any finite RMS microscope objective (i.e. objectives that are marked with "160mm" rather than "infinity") on your Sony A, Sony E / FE, Canon EF / EF-S, Canon RF, Canon M, Nikon F, Nikon Z, Fujifilm X,…
These are the original models for the "Anycubic Live View Camera for FDM 3D-Printer" assembled into a Blender Project. Printed with “Anycubic Kobra 3” I got the best result with following settings: Preset 0.10mm 3D Photo KOBRA3 Layers and…
This newly designed camera case for the Raspberry Pi Camera Module v2.1 features a precise press-fit design. The 3D-printed components snap together cleanly, eliminating the need for glue or screws. Inspired by the Adjustable/Rotating…
WARNING The webcam application gets the board too hot for PLA even with the heat sink. I haven't seen it obviously deform but in my case the snap fit stopped working. You'll need to use PETG (and the PETG versions of the case) which has…
Version 2.0 Now Available The new version has a thicker base structure and inset guides to strengthen the arms and provide overall better grip. Much less chance of the case slipping off the strap or deforming over time and the overall…
This is a thin, light weight case for the Samsung Galaxy Fold 7. Your printers needs to be dialed in as there are lots of overhangs, thing spindly bits. and even some straight up unsupported lips. I printed with no supports, .12 layer…
This is a customizable camera mount screw, but you can customize it to any other thread if you like. I designed this in order to be able to use longer cam mount screws on Noctaro's cam stand with the TPU anti slide part. Most important…
Nebula X axis camera mount for ender 3 v3 ke/se gives you a clear view of the nozzle so that you can monitor for print problems and record time lapse videos with the Creality nebula camera. changes from the original include lowering the…
Both of these two models can serve as a drop-in replacement for the Flashforge injection molded camera mount, which is stock on the AD5M Pro, and can be ordered from Flashforge's website for use on the AD5M (non pro version). One of the…
**NOTE some printers may need a short back riser, I have included a shorter version which angles up slightly more to compensate, I recommend printing all parts at the same time and choosing the one that suits your printer. If you want the…
Look for all information and recent models on https://www.thingiverse.com/thing:6574108 .
The mounting is done by clipping in the bracket and can be moved forward or backward if necessary ... I thought I could print the bracket I had designed for the Prusa MK3s. It fits too, but very tight, so it is very difficult to move.…
UPDATE The camera mount was working but when there were fast short movements with many direction changes it started to wobble. I added a V2, it doesnt look as nice but it is more stable. If you are into timelapse videos then you…
This scope attachment allows you to shoot and record scope view simultaneously. It uses a semi-transparent mirror to send part of the light to the camera and the rest to the shooter's eye. The attachment is a modular design consisting of…
Printed in Prusament black PETG, 0.2 layer hight and 100% infill.
Raspberry Pi Camera Stand Because this camera has a large focal distance and fixing the device in the printer frame does not provide the best image. This stand allows other uses to the camera. Features Compatible with the official Pi…
Update 30/07/22; I have Uploaded V3.4, This generates a Single Custom Bellows without throwing any errors. V3.4 also includes an automatic two stage bellows generator. You can now print the bellows in two parts allowing for longer bellows…
Remix using files from. https://www.thingiverse.com/thing:3147743 https://www.thingiverse.com/thing:4588354 https://www.thingiverse.com/thing:4141144 I made the Base in Tinkercad to Hold a Blink Mini Camera…
I needed to protect the lens of my Blink Outdoor cameras from heavy rain (the water drops in the lens turn the image very blurry). So I decided to do a remix of the wonderful Blink camera Hood created by Neil Baker…
“Front” model was the first design and it requires screws. “Diagonal” and “side” models slide into the rails so they don't require screws. If your printer doesn't have threaded screw holes these should do the job. Although I designed…
I uploaded a video where I show the design and assembly process. I tried making the camera as simple as possible, but some parts might be difficult to get. The ratchet wrench components used for the film advance mechanism are totally…
UPDATE 3: IMPORTANT only use these new files with the cutout for the U.FL socket (see images). The old design by BetaFPV likes to knock the U.FL right off the board… Ask me how I know. If you're in a similar situation, I wrote up a quick…
This is a camera mount for the Prusa i3 MK3 and MK3S. It will hold your camera on the body of your printer. I add also a screw, to attach your camera with standard-thread on the mount. IMPORTANT: If you use the screw, be sure to print it…
Переходник - крепление для камеры Xiaomi Mi Home Security Camera 360 Adapter - mount for Xiaomi Mi Home Security Camera 360 Category: Camera
Just the single screw I designed because I needed it for this project: Lens Cap Holder Update (01-07-2020): Edited a new version to be printed lying on the print bed: Camera Screw V2 Update (19-04-2022): I uploaded some longer versions of…
I remixed this model because I had a collision with the connection of two frame parts on my Core One. To fix this, I thickened the contact surfaces slightly and moved the camera a bit further inward. This now allows for a secure fit,…
Print with supports on build plate at 0.2mm. Increase infill density and/or perimeter count and/or material used to suit your strength needs. When you try to insert the ¼" screw, you'll need to penetrate the one-layer thick “threading”…
Important updates 2025-02-21: Made a parametrically generated focusing scale , generated as an SVG file using JavaScript, using FFD and helicoid size as parameters. 2025-02-16: Made an illustrated user guide that covers all the quirks of…
I had an ancient Pi Zero I wanted to use again, but the old CSI port for the camera had long lost its clip. They're incredibly brittle. So, I just made a new one to plug in. This is still experimental, but it's working so far. The little…
This is an STL printed laying down at low layer heights with different colored filaments with the goal of blending the filament colors to make both a multi-color and exaggerated depth image much like a cameo or bas relief. The file will…
Clip-Together Case for the Standard View Raspberry Pi Camera Module 3
Perfect for this 14 the february!!!!!
This is an enclosure for the Arducam 1080P Day & Night Vision USB Camera Module (SKU: B0205) which is a nice camera USB with auto-switching infrared night vision. The back of the enclosure has a mount that works with the Modular Mounting…
Thank you all for the kind messages! Can't wait to see your images, please tag them in social media #ligero69 where possible. Much love! ……… Please note that due to high minimum buys (like 20-100 screws/nuts, etc) the hardware required…
2/17/24 UPDATE: I uploaded a second knob that has a longer screw thread. Use the longer one for attaching the Pi Mount to the Pivot and the shorter one to attach the Pivot to the Bracket. 11/1/23 UPDATE: I modified the bracket to be…
I have taken ALL of the work out of mounting your Logitech C270 to your Ender 3 V3 SE X-axis. You don't need to do ANYTHING other than have this camera (or camera with similar mount), and this Ender, then just print. No hardware? No…
Personally I felt the camera angle to be a bit low. So I designed a 2 inch extention on a ball and socket so that the final angle can be adjusted. Everything clips into place using the original mount. I prefer this, it gives a better view…
UPDATE (9 JUL 22): Looks like I messed up the right mount by mirroring it after adding threads, which apparently resulted in a left-hand thread. Hopefully this latest version of the Right Mount fixes that. This is a system to mount the…
When the 4x microscope objective available from “Reakway” is mounted 150mm away from a camera's sensor, it works wonderfully for photography, covering a full-frame image sensor with a nice sharp image. You can find my standard…
I spent a significant amount of time searching for the best case for my Raspberry Pi 2 W and Camera Module 3 autofocus to stream my 3D printer. All the models I found had their disadvantages, so I chose one to remix and polished it.…
Arm to help folks mount a camera to their SV06/Plus front frame. Arm has a hole that should accommodate a variety of bolts for camera bases. Step files included if adjustments are necessary. Haven't tested with anything heavier than a…
This is a case for the PI camera with fisheye lens and IR light https://www.amazon.co.uk/MakerHawk-Wide-angle-Automatically-Day-Vision-Night-Vision/dp/B07DRH5Y5S REMIX from https://www.prusaprinters.org/prints/3407
This is the 3/8" version of my ¼" camera/tripod screw. It has just the same outer dimensions (length, headplate) but, obviously, a different thread (and, according to that, a thicker shaft that adds some stability). The 3/8" UNC thread…
A mount to use your iOS 16 MagSafe equipped iPhone as a Continuity Camera for an iMac Pro. See https://www.theverge.com/2022/6/7/23158510 for more information. Link to original .shapr source file.…
I bought a used PSVR but it didn't come with the camera stand, so I decided to design and print one! It fits the camera nice and snug, so you can rotate the camera in it and it'll hold its rotation. I put some of these rubber feet on it…
Prusa Mini and Mini + Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. Added x axis strain relief to…
This is a webcam mount for an Ender 3 V3 SE printer. You'll need a screw to mount the camera with, I used this one: https://www.printables.com/model/55771-tripod-screw ------------------------------ Slicer: Creality Print Nozzle: 0.4…
This is a remix of Stamos "Raspberry Pi 3/4 B+ Case" with a slot for the camera cable. This only includes the base part. Please download the the covers from the original part here:…
Snap on mount for the Creality Nebula camera that clicks onto the Z pillar. May fit Ender 3 v3 se as well. Printed with 3 walls 15%infill. May need a good amount of force to snap onto the printer. Once its on it has a very snug fit. The…
This is a mount for a Raspberry PI Camera on a Prusa Technologies MK3s 3D Printer. The mount attaches to the X-Axis Motor with a single M3x10 screw (use one from the Prusa spares package.). The design is for a Raspberry Pi v2 Video…
Simple camera (for COREONE) mount for installation in Enclosure for PrusaXL Installation: - the camera needs to be hooked and clicked - attached to the Enclosure using two nylon rivets (3,1x4,5) Print: material - PETG layer height 0.2mm…
Meet the Ultimate Camera Mount for the KE. I wanted a more distanced view of the prints whilst ‘following’ them as they grew. Remixed the model by Alehandoro to make it longer with a couple dowles to print in two parts. 5% Gyroid infill +…
Note. You have to salvage a lens from a disposable camera. The one I used is from a Kodak fun saver Update v.1.2: Added a knob to lock the focus and adjusted some dimensions. Find a small screw, glue it to the knob and drill out the hole…
