P
PrintablesSergey Morozov
Waveshare ESP32-S3 7inch Capacitive Touch Display wall mount case
You shoul use a 4 M3x10 screws to secure a screen to the case.
- Downloads
- 1,571
- Likes
- 56
- Rating
- 5
Search results: capacitive
Counting matching models…
P
PrintablesJan Hubík
Capacitive Soil Moisture Sensor v2.0 Cover
Outdoor cover for the popular analog Capacitive Soil Moisture Sensor v2.0 (according to comments, this also fits version 1.2). No soldering changes are required. I just crimped a JST 2.54 mm female connector on the cable. The cable…
- Downloads
- 1,479
- Likes
- 93
- Rating
- 5
P
PrintablesDavid Smith
Waveshare ESP32-S3 7inch Capacitive Touch Display - Tabletop case
The screen can be mounted using the standoffs and screws that come with the Waveshare ESP32-S3 7inch screen. Here is the link to the design in Onshape:…
- Downloads
- 767
- Likes
- 30
- Rating
- 5
P
Printables3D_Project3R
Waveshare ESP32-S3 7inch Capacitive Touch Display Case
This is a remix of https://www.printables.com/model/1030369-waveshare-esp32-s3-7inch-capacitive-touch-display. The screen can be mounted using the standoffs and screws that come with the Waveshare ESP32-S3 7inch screen. There is a cutout…
- Downloads
- 686
- Likes
- 23
- Rating
- 0
P
PrintablesEldon77
CASE for GeeekPi 7 Inch Capacitive Touchscreen
Has been tested on 2 different screens to confirm tolerances. Tested Print settings- 0.2 Layer Height, 30% infill, printed back to face of build plate. To confirm the exact GeekPi 7 model I used here→ https://a.co/d/cPXtGqt I used 4 -…
- Downloads
- 569
- Likes
- 39
- Rating
- 5
P
PrintablesGuillaume Rico
FluidNC CYD pendant case - JC2432W328C (capacitive touch)
I generated the STLs that correspond to the different cases: Bottom : WIthout RJ12 port : CYD_Dial_JC2432W328C_bottom_without_RJ12.stl RJ12 on rounded side : CYD_Dial_JC2432W328C_bottom_RJ12_rounded_side.stl RJ12 on squared side :…
- Downloads
- 539
- Likes
- 36
- Rating
- 5
P
Printableshabawich
Voron Displaymount for 5 inch waveshare capacitive touch display
This is a displaymount/cover for the 5" Waveshare display. It is created to be used on Vorons. It is mounted to the Voron-Mod "BTT PITFT50 45-degree", which can be found here:…
- Downloads
- 531
- Likes
- 38
- Rating
- 4.8
P
PrintablesNS
Capacitive Soil Moisture Sensor v1.2 v2.0 Case (box)
Allow me to introduce you Capacitive Soil Moisture Sensor v1.2 and v2.0 Case (box). I required this sensor in one of the previous projects and create case for it, to make it more secure. Hope you will enjoy it. Print instructions:…
- Downloads
- 519
- Likes
- 31
- Rating
- 5
P
Printablescoxx
Capacitive soil moisture sensor case
Case for sensor. It is enough waterproof for “standard” humidity. It is not fully waterproof when water sprays directly to case for long time. In this case is necessary to seal by glue. You need also two wood screws 2.5 x 10mm. I printed…
- Downloads
- 496
- Likes
- 41
- Rating
- 4.5
P
PrintablesXerses
Xerses Remix/Remake - Kia EV6 Console Capacitive Button Cover
2025-01-26 UPDATE: I received a request to make one without the heated steering button so I added it to the 3MF and I created a new set for RHD vehicles, so there is a new RHD 3MF file, as well as the RHD STL files. 2025-01-25 ADDED A…
- Downloads
- 480
- Likes
- 29
- Rating
- 0
P
Printablesdanielkrah
Capacitive Soil Moisture Sensor V1.2 case waterproof
:edit 23.04.2024 added version for mounting on a wooden board. Use 3mm wood screws.
- Downloads
- 361
- Likes
- 32
- Rating
- 4.75
P
Printablesgzilli
![ESP32 Capacitive Touch Screen Module Case [ESP32-3248S035C]](https://media.printables.com/media/prints/803596/images/6220234_304b43ac-eb9d-44ae-ab04-887339741e1b_2b323069-321d-4bba-b47a-411db5d91489/esp32case2.png)
ESP32 Capacitive Touch Screen Module Case [ESP32-3248S035C]
ESP32 Capacitive Touch Screen Module Case [ESP32-3248S035C]
- Downloads
- 315
- Likes
- 21
- Rating
- 0
P
PrintablesVTom
yoRadio case for IPS 3.5 Inch SPI 480*320 Capacitive Touch Display
The box dimensions are assembled without accessories. - width 220 mm - height 80 mm - depth 170 mm The size of the usable thermal insert nut is M3X4X5 The size of the plastic screw that can be used is M2.9 x 8 Pan Head Torx Screw for…
- Downloads
- 276
- Likes
- 13
- Rating
- 0
P
PrintablesAlessio Compagni
Capacitive Soil Moisture Sensor Cover
This cover is studied to be closed without screws, it's designed with no holes on top of the cover so that the rain could not flow inside, enough space to do a connection with another wire, no space to let enter bugs.
- Downloads
- 276
- Likes
- 38
- Rating
- 5
P
PrintablesStefan Hoschka
5inch (5") Waveshare Capacitive Touch Screen LCD (H) Case
First i wanted to do a remix, but it seems esier to just make a new one. This is a case for 5inch Capacitive Touch Screen LCD (H) https://www.waveshare.com/5inch-hdmi-lcd-h.htm mostely used for a Klipperscreen I use this for my Reprack…
- Downloads
- 262
- Likes
- 17
- Rating
- 0
P
PrintablesTSWhelchel
GeeekPi 7 Inch Capacitive Touchscreen Shell
I printed mine on its side, but do what you think is best for your setup. there are also mounting holes for a raspberry pi, but would need some offsets of some kind.
- Downloads
- 243
- Likes
- 11
- Rating
- 0
P
Printableshaus of nyd
7 inch Waveshare Capacitive touch screen Housing
A simple casing for the 7 inch waveshare capacitive screen. Simple screen with HDMI output. Printed with transparent PETG, 10% infill and 3 wall loops. Play with infill patterns for designs if you're using transparent filaments! Don't…
- Downloads
- 230
- Likes
- 14
- Rating
- 0
P
Printablesewr2san
Adafruit Stemma Capacitive Soil Sensor Cover for IoT Garden
A sensor cover for the Adafruit Stemma Soil Sensor: https://www.adafruit.com/product/4026 Snaps Together nicely no glue needed. I print in PETg for outdoor durability. Logo on top (for those of you wondering) is for Team 4160 for which I…
- Downloads
- 211
- Likes
- 17
- Rating
- 4
P
PrintablesMIRE
Table top housing for Waveshare ESP32-S3 7inch capacitive touch display
Table top housing for Waveshare ESP32-S3 7inch capacitive touch display https://www.amazon.de/gp/product/B0D2NMCY7K I use it for OpenHASP with Home Assistant, in this case to mainly monitor solar panel power generation, batterie and…
- Downloads
- 188
- Likes
- 15
- Rating
- 0
P
PrintablesBruno Alves
Capacitive soil moisture sensor case
This 3D-printable soil moisture sensor case is designed for indoor use, featuring a cylindrical body and a cover. The components join with an M2 8mm screw for stability. To ensure water resistance, it is recommended to apply silicon…
- Downloads
- 185
- Likes
- 17
- Rating
- 0
P
PrintablesJohncom
Voron Displaymount for 5 inch waveshare capacitive touch display (DSI REMIX)
Remix for DSI LCD version instead of HDMI
- Downloads
- 138
- Likes
- 9
- Rating
- 0
P
PrintablesJulian
M12 Inductive/capacitive sensor mount, low profile
Here's a simple mount for a standard M12 sensor.
- Downloads
- 114
- Likes
- 7
- Rating
- 0
P
PrintablesMakergal3D
Prusa I3 Extruder (Flexible Filament)(Mk7/MK8)(BLTouch/18mm Capacitive Sensor/12mm Inductive Sensor))
Extrusor para materiales flexibles, se puede acoplar en prusai3 o similares. Especialmente diseñado para estos materiales, la idea es dejar el menor espacio posible entre la rueda tractora y el PTFE. así impedimos que el filamento se…
- Downloads
- 107
- Likes
- 8
- Rating
- 0
P
PrintablesMic
cover for Capacitive Soil Moisture sensor
Cover for Capacitive Soil Moisture sensor https://www.amazon.it/dp/B07DDFZ3MD?ref_=cm_sw_r_cp_ud_dp_6RX71C3XNRJ7X19JS65C Bolts M3*8: https://www.amazon.it/gp/aw/d/B073ZV8GW3?ref=ppx_pt2_mob_b_prod_image # If you like it ;)…
- Downloads
- 98
- Likes
- 8
- Rating
- 5
P
Printablesdanowall
Capacitive Pulsing Heart
This 3D printed heart senses when it's touched and begins pulsing in response. Full build guide can be found at https://learn.adafruit.com/3d-printed-heart-capacitive-touch Print instructions Category: Biology Summary This 3D printed…
- Downloads
- 98
- Likes
- 23
- Rating
- 0
P
Printablesflohoff
Parametric Capacitive Soil Moisture Sensor Case
Existing cases would not fit my Sensor, most likely the dimensions vary for remakes and i'd like a half-way good enclosure with screws so i made this parametric OpenSCAD model which you may modify for your needs.
- Downloads
- 94
- Likes
- 5
- Rating
- 5
P
PrintablesShifter
ETEPON Capacitive 7 Inch Touch Screen for Raspberry Pi LCD Display Stand
ETEPON Capacitive 7 Inch Touch Screen for Raspberry Pi LCD Display stand . I use 2 of them . Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 15 Filament: any PLA Category: 3D Printer…
- Downloads
- 91
- Likes
- 4
- Rating
- 5
P
PrintablesJoachim
Waveshare 4.3" DSI Capacitive Touchscreen Display Enclousure
Enclosure for the Waveshare 4.3" DSI Capacitive Touchscreen Display . Assembly The screen is mounted using four screws from the bottom of the case. The lid it self is pretty much just cosmetic to close the box. Printing instructions…
- Downloads
- 89
- Likes
- 13
- Rating
- 0
P
PrintablesiSandRocks
11.9inch Capacitive Touch Screen Case
the case for the screen is and exact fit so you will need a slim HDMI cable to fit in there. I ended up just cutting the plastic housing off a on end of a hdmi and putting a heat shrink sleeve over it.
- Downloads
- 86
- Likes
- 6
- Rating
- 0
P
Printablesdriftrotor
Voron V0.2r1 Mellow Fly 3.5 inch Capacitive Touch Screen Skirt
As the title suggests, this will allow you to fit / use the Mellow Fly 3.5 inch V2 touch screen ( Capacitive ) This is an adapted version of the one that Schlongky and I have been working on for the Mini Fridge Door Skirts and carries…
- Downloads
- 80
- Likes
- 11
- Rating
- 0
P
PrintablesTinkerVision
Capacitive Soil Moisture Sensor v1.2 - Waterproof Encasing
Printing instructions: 40% infill PETG, ABS recommended Tree support for cable outlet Find more detailed information about this model on my original upload
- Downloads
- 76
- Likes
- 8
- Rating
- 0
P
Printablesokticom
Capacitive Soil Moisture Sensor 2.0 Housing
Capacitive Soil Moisture Sensor V2.0 Housing 2x2M 10mm screws To improve water resistance you can use a sealant in channels placment marked with red color on image. You need to trim pins on sensor on back side as they stick to much(nail…
- Downloads
- 72
- Likes
- 8
- Rating
- 0
P
PrintablesQualith
5 inch TFT display capacitive stand
I designed this stand frame for my new 5 inch CTP screen. It's this one: JLT Technologies JRP 5008 https://es.aliexpress.com/item/1005002280377732.html Use some M3 screws to hold it. I put some auto adhesive small rubber feet to prevent…
- Downloads
- 61
- Likes
- 4
- Rating
- 0
P
Printableskubatyszko
Morserino 32 capacitive paddle wedge
Capacitive paddles shipped with Morserino 32 are very delicate and like to fall out. This tiny tool slides neatly between the acrylic case and the paddles, keeping them in place. Print in any filament you want, any layer height you want,…
- Downloads
- 60
- Likes
- 3
- Rating
- 5
P
Printablesyohannaftali
Waveshare 5 Inch Capacitive Touch Screen HDMI LCD (H) Cover
Cover for Waveshare 5 Inch Capacitive Touch Screen HDMI LCD (H) Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No Supports: No **Resolution:** 0.2 Infill: 25% **Filament:** Sunlu PETG Yellow Category: 3D Printer…
- Downloads
- 59
- Likes
- 9
- Rating
- 0
P
PrintablesZT_1234
Raspberry pi klipper KlipperScreen Stand/case for waveshare 7" HDMI LCD capacitive/resistive touchscreen Display B
I used the M2.5 8mm standoffs and 4mm M2.5 screws that shipped with the display on the base, and 16mm M2.5 screws to mount the frame, display and spacers onto the base. The holes on the frame have sacrificial bridging so you will need to…
- Downloads
- 56
- Likes
- 10
- Rating
- 0
P
PrintablesSkynets MyDreamZone
Capacitive Soil Moisture Sensor
Sensor housing. Protects electronics from water and moisture
- Downloads
- 53
- Likes
- 3
- Rating
- 0
P
Printablesarminth
How to attach a LJC18A3-H-Z/BX capacitive probe via optocoupler to Creality Ender 3 (and other printers)
This is a quick description on mounting the LJC18A3-H-Z/BX on an Ender 3 as an alternative to ready made kits available on the market. You need some soldering skills and a bit of electro-technical knowledge. If you don't know what you are…
- Downloads
- 52
- Likes
- 3
- Rating
- 5
P
PrintablesWaebis-Lab
Capacitive Soil Moisture Sensor Case v1.6
Full protection case for soil moisture sensor. Fill the upper part with water resistant material to protect the electronic part. The screw (M3) on the bottom is intent to set the operating height of the sensor. It is the solo version…
- Downloads
- 49
- Likes
- 7
- Rating
- 0
P
Printablestomatis
Connectors-cover for referred display cover "GeeekPi 7 Inch Capacitive Touchscreen Shell"
# Printinfos * Printprofile: MK4 IS 0.20mm Speed (mit MMU3) * Nozzle: 0.4mm (Olson Ruby) * Material: Prusament PETG * Supports: none
- Downloads
- 48
- Likes
- 6
- Rating
- 0
P
PrintablesItsLato
Capacitive Soil Moisture Sensor V2 - Cover
Protect the electronics of your HW-390 sernsor with this cover. The cover uses a single 3mm screw. No supports needed.
- Downloads
- 46
- Likes
- 12
- Rating
- 0
P
Printablespadigree
DS18B20 Clip to Soil-Moisture-Capacitive-Sensor
Designed this little tool to mount the waterresistant DS18B20 (7mm stainless-steel version) on top of a Capacitive-Soil-Moisture-Sensor to watch the earth temperature and the moisture level via IOT in the flowerpot on the balcony. With a…
- Downloads
- 41
- Likes
- 2
- Rating
- 0
P
PrintablesElbinos
AIDA64 Monitor 800*480 Capacitive Touch Screen
Case for Monitor 800*480 that I use as a sensorpanel connected to my pc. Show different sensors via AIDA64 Touchscreen from Aliexpress: 5.0 5008 Aida64 5008 Monitor 480*800 Capacitive Touch Screen Raspberry Pi 4 3b+/ Pc/banana Display…
- Downloads
- 39
- Likes
- 7
- Rating
- 0
P
PrintablesAdafruit
BLE MIDI Controller with Capacitive Touch Pads
In this guide, I'll show you how I built this strange looking MIDI controller. It doesn't look like your typical drum pad or keyboard, but it does have similar functionality just like any standard MIDI controller. It features six…
- Downloads
- 39
- Likes
- 17
- Rating
- 0
P
Printableswarpman
Waveshare ESP32-S3 7inch Capacitive Touch Display Case With Battery
A remix of the Waveshare ESP32-S3 7 inch Capacitive Touch Display Case but with a space in the back for a battery. Due to the space in the back for the battery the case is slightly thicker than the original. I also simply tapped the…
- Downloads
- 35
- Likes
- 1
- Rating
- 0
P
PrintablesDisplayModule
2.1" 480x480 TFT Round Capacitive
Diagonal Dimension : 2.1 inch Resolution : 480RGB x 480 pixel View Direction : All Touch Mode : Capacitive Module Dimension : 48(H) x 32.2(W) x 3.2(T) mm Viewing Area : 26.64 x 26.64 mm Supply Voltage : 5.0 V Interface : - Luminance :…
- Downloads
- 35
- Likes
- 1
- Rating
- 0
P
PrintablesAbelo Tales
Capacitive Pen for Touchscreen (does not work)
I created these models with the hope that it would work, maybe you need them, maybe you not but i hope they are helpful.
- Downloads
- 35
- Likes
- 1
- Rating
- 0
P
PrintablesCaleb Marsters
Raspberry pi 5, 5 inch waveshare capacitive touchscreen case
this is a case for a raspberry pi 5 attached to a waveshare 5 inch capacitive touch display 800x480, if you have any suggestions please leave a comment M2.5x10mm screws
- Downloads
- 34
- Likes
- 9
- Rating
- 0
P
PrintablesCrazyJason14
TronXY X5SA PRO 18mm Capacitive sensor bracket
Just my modified capacitive sensor bracket for my TronXY X5SA PRO. I drilled new holes above the stock bracket location to give some adjustability to the sensor and found that the bracket blocked the stock fan shroud mounting bolt. I used…
- Downloads
- 33
- Likes
- 2
- Rating
- 0
P
PrintablesKevin Claypool
5.65" tall capacitive soil moisture sensor deep-soil mount
This is a deep-soil sensor mount for the Capacitive Soil Moisture Sensor v1.2…
- Downloads
- 31
- Likes
- 6
- Rating
- 0
P
PrintablesKevin
Capacitive Touch Macro Keypad
This is a multi-material print that uses a conductive filament and an insulating filament. All you need is an Adafruit circuit playground and 8 screws. I have also included some basic code to help you get started (adapted from Carter…
- Downloads
- 29
- Likes
- 5
- Rating
- 0
P
Printablestheo regnier
E3D Dual Extruder mount for Hypercube Evolution with 18mm capacitive sensor
I made this to adapt a dual extruder on the Hypercube Evolution. I also use a 18mm capacitive sensor. I try to made this as small as possible, to keep a good autobed leveling and to keep the maximum travel distance You can still use the…
- Downloads
- 27
- Likes
- 3
- Rating
- 0
P
PrintablesR
Capacitive proximity sensor mount for laser cutter
Just a fun project for a free time, a capacitive proximity sensor mount for a laser cutter. It can fit a sensor that has diameter about 12mm and fit with 24mm laser lens. It didn't take me a long time to design this so if there is any…
- Downloads
- 27
- Likes
- 4
- Rating
- 0
P
Printableslsh32
Capacitive Soil Moisture Sensor Nodemcu Wemos D1 Mount
Uses one of those soil sensors, https://duckduckgo.com/?q=capacitive+soil+sensor&iax=images&ia=images Together with https://www.wemos.cc/en/latest/d1/d1_mini.html And (optionally) 7805 (I use it to lower the voltage from supply)…
- Downloads
- 27
- Likes
- 8
- Rating
- 0
P
Printablesusername1234
Tronxy X5s cooler with Capacitive/Inductive probe mount
I really liked the cooler that Alessio_Bigini made but i didnt have a BL Touch i had an inductive sensor instead so i remixed it to fix an inductive sensor, i havent printed it yet as i am installing a new 32bit skr board soon and i am…
- Downloads
- 25
- Likes
- 1
- Rating
- 0
P
PrintablesMechano
TwoTrees SK1 CYD 3.2" capacitive enclosure and support
Enclosure for CYD Klipper 3.2" capacitive version for TwoTrees SK1. The support is for SK1 but you can use the enclosure for other model of printers.
- Downloads
- 24
- Likes
- 6
- Rating
- 0
P
PrintablesFluxc0re
ETEPON Capacitive 7 Inch Touch Screen for Raspberry Pi LCD Display Stand
ETEPON Capacitive 7 Inch Touch Screen for Raspberry Pi LCD Display stand . I use 2 of them . Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No **Resolution:** 200 Infill: 15 **Filament:** any PLA Category:…
- Downloads
- 24
- Likes
- 1
- Rating
- 0
P
PrintablesHari Hurtig
Morse CW capacitive touch sensor paddle
Can be used e.g. with the touch pins of an ESP32. Use 15x1mm brass punching blanks. After soldering the wire they're pressed into the recess (works great with a bench wise). Mounting holes fit m3 screws.
- Downloads
- 21
- Likes
- 3
- Rating
- 0
P
PrintablesAlex B
ESP32-S3 4.3inch Capacitive Touch Display Streamdeck-ish case
Wanted to turn my ESP32-S3 4.3inch Capacitive Touch Display Development Board into something like a streamdeck, finally got around to 3D modeling a case. use M2.5 bolts and some washers on the right side to get the spacing dialed in. i…
- Downloads
- 21
- Likes
- 2
- Rating
- 0
P
Printablesjohnzanussi
Capacitive Moisture Sensor Magnet Mount
Read my post on using this to create a self-watering system for my Christmas tree. https://johnzanussi.com/posts/diy-automated-christmas-tree-watering The capacitive moisture sensor friction fits into the print, but a dab of hot or super…
- Downloads
- 21
- Likes
- 1
- Rating
- 0
P
PrintablesRomechdel
Capacitive Sensor bracket (LJC18A3-H-Z/BX)
original design: https://www.thingiverse.com/thing:1536016 Modified with m3 hex nut holes and modified the back plate to fit my prusa i3. Print Settings Printer: Prusa i3 boxframe Rafts: Yes Supports: Yes Resolution: 0.2mm Infill: 20%…
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
Printablespixeledi
Hotkeys with Arduino Micro & capacitive buttons
Simple Case for 4 capactive buttons which trigger hotkeys to your system. The buttons are attached with hot glue. Full code: https://github.com/pixelEDI/Arduino_OBS_Hotkey
- Downloads
- 19
- Likes
- 1
- Rating
- 0
P
PrintablesDisplayModule
3.4“ 800x800 Round 350 nits Free View Capacitive Touch TFT -MIPI
Diagonal Dimension : 3.4 inch Resolution : 800x800 pixel View Direction : FREE Touch Mode : None Module Dimension : 99.0(H)x96.6(V)x3.98(D) mm Viewing Area : 87.6(H)x87.6(V) mm Supply Voltage : 1.8 V Interface : MIPI 3lane Luminance : 350…
- Downloads
- 18
- Likes
- 0
- Rating
- 0
P
PrintablesChalmak
Surround for Capacitive touch sensors KT5009 and similar
Cover for Capacitive touch sensors, print it in needed color. PLA material works fine.
- Downloads
- 18
- Likes
- 3
- Rating
- 0
P
PrintablesAndreq
Capacitive Sensor mount for direct drive extruder
Simple mount for a capacitive sensor for my Wilson TS. Should fit on any direct drive extruder (Wilson or Rework) Print Settings Printer: Wilson TS Rafts: No Supports: No Resolution: 0.2mm Infill: 20 Notes: Worked well in ABS and PLA…
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
Printableseightpoundbagoforanges
Mount for AT42QT1010/Generic Arduino Capacitive Touch Sensor
Press-fit mounting plates/spacers for capacitive touch sensors. There are versions of the model for the Adafruit AT42QT1010 and (I think) this generic one: These can mount to a surface with (about) M3 bolts (or the American equivalent).…
- Downloads
- 16
- Likes
- 6
- Rating
- 0
P
PrintablesPoseidon
Waveshare 10.1inch Control Panel,Compatible with Raspberry Pi 5 Pi 4B/3B+/Zero 2W/Jetson Nano/Mini PC Capacitive Touch Display Optical Bonding Toughened Glass Panel 1280×800 IPS HDMI Interface Gehäuse
Wand-Dashboard für Home Assistant auf Raspberry Pi + Waveshare 10.1" Touch-Display (10.1DP-CAPLCD, 1280×800, IPS, kapazitiv, optical bonding, HDMI). Kein Fully-Kiosk-Browser, keine Android-Lösung — bewusst minimal: Raspberry Pi OS Lite,…
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
PrintablesPietDeVries
Capacitive Sensor Holder
If you want to use a Capacitive sensor for mesh bed leveling. For mounting to Voxelab Aquila X2 next to the extruder in the exisiting mounting holes.
- Downloads
- 16
- Likes
- 0
- Rating
- 0
P
PrintablesJasonlorado
NiceMCU-32S 2.8" Capacitive CYD Enclosure (with magnets)
--!!! This case is specifically for the NiceMCU-32S 2.8" CYD !!!-- The dimensions are the same but the ports are moved around. The USB-C port is in a different spot. If there is interest in making this compatible with out boards, let me…
- Downloads
- 15
- Likes
- 4
- Rating
- 0
P
Printablesandr3
Holder capacitive sensor 18mm (on Geeetech Prusa i3)
I got tired of my capacitive sensor (same as Prusa, 8mm diameter and 2mm distance range): it had to be super close to the same height as the nozzle, which led to ripping off things that didn't stick well for some reason. Furthermore, I…
- Downloads
- 14
- Likes
- 2
- Rating
- 0
P
Printablesjulio004
JST XPH-3 for capacitive sensor ex. LJC18A3-H-Z/BX or replace damaged one of Anet A8
Simple but funcional jst connector for anet A8, fit perfect in all sensors connectors
- Downloads
- 14
- Likes
- 3
- Rating
- 0
P
PrintablesMake'n'Modify
RepRapPro Mendel Carriage for E3D Hotend and capacitive Z-Probe
For the X-Carriage i took the one of the Prusa i3 and changed the distance of the bearings to fit the RepRapPro Mendel. The E3D is shaped into the mount using a clip. Next to it i added a place for a capacitive probe. You can see it in…
- Downloads
- 14
- Likes
- 0
- Rating
- 0
P
PrintablesDave
Capacitive touch switch holder.
Capacitive touch switch holder for immobilizer touch button. I desolder the pins and solder wires in it's place. Printed in abs/petg.
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
PrintablesYan1 ALAN
Klipper 4.3" 800x480 DSI Capacitive Touchscreen IPS LCD Ender 3 v3 SE mount
This is a 4.3" 800x480 DSI Capacitive Touchscreen IPS LCD mount for Ender 3 v3 SE for klipper to replace stock screen. Needed to print with support. Infill: 20. Wall thickness: 3. Can be printed with any regular filament, eg: PLA, PETG,…
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesDisplayModule
1.3" 240x240 IPS Round Capacitive
Diagonal Dimension : 1.3 inch Resolution : 240RGB x 240 pixel View Direction : All Touch Mode : Capacitive Module Dimension : 48(H) x 32.2(W) x 3.78(T) mm Viewing Area : 32.4 x 32.4 mm Supply Voltage : 5.0 V Interface : - Luminance : 300…
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
Printablesrebeltaz
Capacitive / Inductive Mounting Plate For Modular X Carriage by Elzariant
Being me, things never work right. I originally made this adapter to use with Elzariant's most excellent modular X-carriage for the Tevo Tarantula, but of course, I was unable to get it working correctly. I have been unable to find*…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesPavlo Lazariev
Capacitive Extended Thumbstick Caps for Steam Controller 2
I love playing shooters with stick extenders — the extra height gives noticeably better precision. But existing caps that fit the SC2 have two problems: they kill the capacitive touch function of the sticks (which matters a lot on this…
- Downloads
- 10
- Likes
- 2
- Rating
- 0
P
PrintablesJasonlorado
Capacitive CYD Case with Battery and Speaker
Double check the location of your USB-C port. This is intended for centered USB-C ports with buttons on either side of it. Built for an 1100mah MakerFocus battery. I used this board, specifically: ESP32-S3 CYD Display, 2.8" 240x320 IPS…
- Downloads
- 9
- Likes
- 3
- Rating
- 0
P
Printables3D Try Outs
Non Contact Capacitive Mount
Non Contact capacitive mount M3 Bolts
- Downloads
- 8
- Likes
- 2
- Rating
- 0
P
PrintablesYasin
ESP32 Capacitive Touch Sensor Enclosure (TouchBox ESP32)
A compact 3D-printable capacitive touch enclosure for ESP32 touch pins. A copper coil is installed into the enclosure using a soldering iron, then connected to an ESP32 touch pin. The sensor detects touch through the PETG plastic cover,…
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
Printables
Raspberry Pi4 & Waveshare 10.1" 1920×1200 High Resolution Capacitive Touch Display
Build a professional protective frame for your Raspberry Pi 4 with integrated Waveshare 10.1" 1920x1200 High-Resolution Capacitive Touch Display mounting. This horizontal mounting variant with integrated mounting for high-resolution…
P
Printables
Raspberry pi 5, 5 inch waveshare capacitive touchscreen case
this is a case for a raspberry pi 5 attached to a waveshare 5 inch capacitive touch display 800x480, if you have any suggestions please leave a comment M2.5x10mm screws
P
Printables
Capacitive Soil Moisture Sensor v1.2 - Waterproof Encasing
Printing instructions: 40% infill PETG, ABS recommended Tree support for cable outlet Find more detailed information about this model on my original upload
P
Printables
yoRadio case for IPS 3.5 Inch SPI 480*320 Capacitive Touch Display
The box dimensions are assembled without accessories. - width 220 mm - height 80 mm - depth 170 mm The size of the usable thermal insert nut is M3X4X5 The size of the plastic screw that can be used is M2.9 x 8 Pan Head Torx Screw for…
P
Printables
Capacitive Soil Moisture Sensor V2 - Cover
Protect the electronics of your HW-390 sernsor with this cover. The cover uses a single 3mm screw. No supports needed.
P
Printables
Case Fox PAD- guition jc8048w550 capacitive touch
Precision-engineered, durable handheld enclosure specifically designed for the Guition JC8048W550 display. The design focuses on mechanical rigidity, a professional industrial look, and easy assembly. Technical Specifications External…
P
Printables
Parametric Capacitive Soil Moisture Sensor Case
Existing cases would not fit my Sensor, most likely the dimensions vary for remakes and i'd like a half-way good enclosure with screws so i made this parametric OpenSCAD model which you may modify for your needs.
P
Printables
5inch (5") Waveshare Capacitive Touch Screen LCD (H) Case
First i wanted to do a remix, but it seems esier to just make a new one. This is a case for 5inch Capacitive Touch Screen LCD (H) https://www.waveshare.com/5inch-hdmi-lcd-h.htm mostely used for a Klipperscreen I use this for my Reprack…
P
PrintablesNerdiy.de
Raspberry Pi4 & Waveshare 10.1" 1920×1200 High Resolution Capacitive Touch Display
Build a professional protective frame for your Raspberry Pi 4 with integrated Waveshare 10.1" 1920x1200 High-Resolution Capacitive Touch Display mounting. This horizontal mounting variant with integrated mounting for high-resolution…
- Likes
- 13
- Rating
- 3
P
Printables
yoRadio case for IPS 3.5 Inch SPI 480*320 Capacitive Touch Display
The box dimensions are assembled without accessories. - width 220 mm - height 80 mm - depth 170 mm The size of the usable thermal insert nut is M3X4X5 The size of the plastic screw that can be used is M2.9 x 8 Pan Head Torx Screw for…
P
Printables
Case Fox PAD- guition jc8048w550 capacitive touch
Precision-engineered, durable handheld enclosure specifically designed for the Guition JC8048W550 display. The design focuses on mechanical rigidity, a professional industrial look, and easy assembly. Technical Specifications External…