Counting matching models…
To follow on from and finish off my Ultimate Prusa MK4 casing I wanted to create a center tray similar to the original for the MK3 version . I was shown this cable cover and wanted to take this design and use it as the basis for the whole…
Jdsfighter model gave us a great baseline design, but in the Australian version of the IONIQ5, the height of the rear part of the tray meant the cover wouldn't close. So we slightly tapered the design and also adding a few more…
gcode 10 hours is without brim gcode 12 hours is with brim
Screw extractor and centre punch holder A holder for the all so important centre punch and the screw extractors. The holder couples with the attachment plate module, print one of each and you have what you need to hang it on a…
The on/off switch for the Lenovo Ideacentre (IdeaCentre AIO 3 27IMB05) is in the back behind the display and difficult to operate, because normally you cannot see it. You can switch on the PC with your keyboard, but this is not reliable…
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
Ford Fiesta Centre Drawer The Ford Fiesta MK7 and up has a hidden center space that is usually used to remove the radio. This design is a drawer that fits in the space, giving extra storage and a acts as a phone mount when partially…
I have a Lenovo ThinkCentre Tiny M90q PC that I wanted to mount under the bottom shelf of my lab workbench. I looked around for existing mounts and couldn't find anything that met my needs, so I set out to design one. I used four #8 x ¾"…
Easy to print drill marker - Parametric Not as sharp and durable as a metal version but for soft wood it works perfectly. Step file included in case you have any issues.
I really liked Smelliot's version of the 10inch rack mount for Lenovo Tiny PCs, but the m900q's rubber feet are in a different position, so I remixed it and moved the feet channels to fit the m920q/m720q, and perhaps any other tiny's that…
This is a Remix of this So it now fits a 19" I needed 2 of this mount for a 19" side by side …. i have adapted the mounts from @Mauker, so you can also just print one side and use some of @Mauker Modular Rack Mount for the other side as…
I have a few Lenovo Thinkcentre Tiny pc's. One came with the stand. I replicated the oem's design so I can have more stands for my other pc's. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution:…
This is a stand for the Lenovo ThinkCentre M9xxq Tiny series for upright use. It eliminates wobbling and gives it a firm and save stand. It might be useful for the other series (e.g. M7xxq and M8xxq) as well. It's designed for a device…
VW Alloy Wheel Centre Cap 65mm Part number - 3B7601171XRW If yours breaks and you still have the original, heat gun the aluminium logo plate off, print this file, and contact adhesive together. Alternatively, you can just print and use…
edit 02.11.2024: added version with screw holes on the top. For under-desk mounting. edit 24.01.2024: Slots for the rubber feet set further towards the center. Curves instead of corners on the narrow bridges. This wall bracket is mounted…
Print settings: 0.2mm layer height 4+ bottom layers and 5+ top layers 6 perimeters w/ 0.6mm nozzle or 9 perimeters w/ 0.4mm nozzle 10+% infill I used PETG. PLA may work fine, but I was concerned about creep. I have also not tested the…
This is a 3D model of the Thinkcentre M920. The 3D model from shuki on GrabCad https://grabcad.com/library/lenovo-2 was used as a reference and significantly modified to fit the M920 better. Fusion and STEP files included so you can…
A mirrored version of the Fiesta Drawer with phone holder by Jacques Strauss for all people having the steering wheel on the left side of the car. Photos 2 and 4 show the version printed with a 0,3mm layer height almost without post…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This mount was designed for M720q/M920q mini PCs, but should work for any Thinkcentre Tiny with the same form factor. The mount has a seat for the Thinkcentre's rubber feet that keep the computer in place. I have a true 1U rear support…
My non-Skoda rims had some random logo, and I didn't want to pay 10-100 euros, so I made my own. Step file included.
I wasn’t satisfied with the center console trays that you can buy on Amazon/eBay and thought I would make my own that uses more of the available depth and customize it a bit for my needs. The one I did comes with various slots for things,…
Wheel hub center caps for Skoda wheels Model is designed for 58mm diameter slot in the wheel. Print so that the logo is standing up, use supports. I printed them out of PETG so they would last longer in the heat, could eventually use some…
Tried so many but decided to do my own with change compartments and Tesla logo in the base. Found this printed really well as it is with just some supports on the lips either side.
This circle centre finder will make it super easy when you next need to find the centre of a circle. Just put the circle so that it meets both edges of the right angle and so that the 45 degree section is passing through the middle of the…
Lenovo Thinkcentre M710t has M.2 NVME port which is on edge of motherboard so if you want to add SSD to it, you have to buy mounting kit which is piece of plastics which snaps to case and provides single screwhole for your SSD. I didn't…
The rack mount can be printed standing on its front side without supports. There are holes on the rear side where threaded M3 inserts can be installed, enabling mounting of the retention clips with M3 screws. For more details, please…
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
A new Remix of this nice mount https://www.printables.com/model/1040412-lenovo-thinkcentre-tiny-m720qm715qm920q-10-rack-mo They can now be assembled in the back too for more strength/support. The screw and hex connector's is adapted from…
Opened up the full hexagons so can be use for connector inserts for CANBUS, fans, ERCF, PG7, & filament sensors. For inserts use these: https://www.printables.com/model/790873-voron-24-skirt-connector-insert-for-canbus-fans-er
This is a 10" Rack mount for a Lenovo Thinkcentre M625q Tiny with the measurements 180x183x35mm. Should fit other PCs from Lenove as well. I used print on supports. I set the brush type to trianlge an painted on the overhangs as seen in…
Inspired by the @chrisbe_318743 cubby box insert. New model which is stronger, easier to print and suits the kind of storage I require for this area. Requires a print bed at least 190mm x 160mm to print upright with bottom of tray on…
english version below deutsch Ein Stück Frankfurt - Bahnhofsviertel / Innenstadt / Westend - Skyline Cityview Ich habe mir ein Stück Frankfurt im Rahmen gebastelt. Der Druck stellt ca. 1 Quadratkilometer Frankfurt dar, inkl, markanter…
Inspired by great video from the guy with Swiss accent I've bought Lenovo ThinkCenter in USFF case to be my home server. I've already have my “internet devices” mounted on a wall in my closed so I quickly designed this holder to mount the…
Hi, just got some used lenovo m920q (should work for a lot of tinys with the same form factor). It has a offset ~ 32mm cause my task has pipes and metal with 30mm under the desk. So cables and connectors are not blocked. this is version…
Updated geometry to fit with a different graphics card. Inner mounting holes needed slight adjustment. I also shrinked the hole for the standoff screw just a tiny bit so you can use a heat press insert (M3). I also added a simple cover…
A new Remix of this nice mount https://www.printables.com/model/1040412-lenovo-thinkcentre-tiny-m720qm715qm920q-10-rack-mo They can now be assembled with more screws and hex nuts. + 2x keystone Print face down. Walls - 4 infill - 30 ore…
The Kia Ceed (CD) Series has a deep storage container. I like the design from papabravo so i make a new one for the ceed series. There are some variants for every use case. For the variants with a handle use more infill (in this area) for…
I wanted some more organised storage in the centre console on my car so designed this simple tray. It has space for 5x UK pound coins, useful for parking or shopping trolley coins. I printed it on my CR10s with a 0.6 nozzle as it was a…
English: Lenovo ThinkCentre M710q Expansion Kit" is a multifunctional expansion solution specifically designed for Lenovo ThinkCentre M710q Tiny-PCs. This kit includes a compact housing for the Tiny-PC and a PCI-E expansion card that…
This is a low profile bracket/baffle for a Broadcom BCM5719-4P - 4 x 1GbE PCIe NIC (for example the BCM95719A1904G) to be used in a Lenovo ThinkCentre M920q tiny PC. Remove the card's original bracket and use a small-head screw from the…
M920q cover for a 2.5gbe A+E keyed RTL8125B adapter. Probably also fits other Lenovo ThinkCentre variants
🇨🇳 欢迎来到深圳! Welcome to Shenzhen, China! The Ping An Finance Center (平安金融中心) is a 115-story, 599 m (1,966 ft) supertall skyscraper in Shenzhen, Guangdong, China. It is the tallest building in Shenzhen, the 2nd tallest building in China and…
Dual Centre Finder - for round and square stock Easy print! No support! Push fit! helps mark the centre of round bar and square bar stock, simply turn it over
Here's my take on the Advan SA3R accessories, Designed to be easy to print without supports. I'm sure it's not perfect, I don't have access to the real deal, However I did take measurements off my 17x8 +35s and 17x9 +38s. Measurements…
The Kia Ceed (CD) Series has a deep storage container. Printed with PETG in order to handle the temperature inside car in summer. Works good enough with 2 perimeters and 15% infill, but to make it strong enough and light at the same time…
Super simple design, should work with all Mazda 6's from 2012 onwards. In my country the Mazda6 still needs the phone to be plugged in by cable for the Apple Carplay to work, the obvious place to put your phone is in the drink…
I needed a Holder for a Lenovo Tiny PC. The original provided by Lenovo were to expensive so I took it into my own hands and designed my own. I'm open for suggestions and critic.
I modified it for a Lenovo M720q Tiny so that its rubber feet could fit through. And I increased its height to make it more stable when there are a lot of cables connected. Standard PLA printing is sufficient.
Bracket for Lenovo ThinkCentre M920Q M920 M720Q P330 Prueba de temperatura: Empieza con un valor bajo, como 220°C, y haz pruebas para encontrar el punto óptimo para tu equipo. La temperatura ideal del filamento PETG suele estar entre…
all main parts made from plywood (12mm) use a piano hinge at back and attach latches at front. 3D printed cup holders
Modified from the original: Slots to allow for the terminals to pass through easier. M3 recessed nut cutouts for mounting the speaker driver. Category: Automotive
This drilling template allows you to easily place and drill a handle on all types of fronts kitchen door or drawer door with the 12 most common centre distances. The model is probably larger than your print area. Use your favorite slicer…
It is common for the tabs on the back of the 130mm centre cabs to break during removal. This glue-in insert can repair a broken tab and extend the life of the cap. Ideally print in ABS and use a solvent cement to glue the required amount…
A Wheelcap with the BBS logo
Fun bowl made using Blender and its cloth physics. Resembles a draped cloth stopped in time. Can be scaled to be used at various sizes. looks really good in a white PLA No supports needed
A storage for the useless tray in the top of the 2022 Mitsubish Triton. Includes a spot for fuel/credit card, pens, chapstick, and general storage. There are two options with different sized pen storage areas. Update 18/08/24: added…
Guide for mounting an MGN12 Linear rail in the centre of a 4020 4040 extrusion. Print top down, 0.2 layer height, no support. no build plate adhesion
Works fine and fits absolute perfect with my M720Q but other M700 and M900 fits too. They have the same size. Dimensions (H x W x D) (17.9 cm x 3.65 cm x 18.29 cm) (M720Q) Dimensions (H x W x D) 17.95 cm x 3.70 cm x 18.34 cm (Wall Mount)…
I lost the protection piece for my centre support on my bike somewhere and made this replacement. Printed this using TPU since the original part is flexible. My TPU is quite old, so the print quality is garbage on my print, but it works.…
Print with PLA or PETG. Infill 25% with 3 Outside Layers.
Use a 3mm bolt and just forcefully wind it in Suggest using 100% infill due to it's intended purpose and suggest using support everywhere.
It isn't every day that you need to find the centre of a Domino mortise, but when you do… these will help. Designed to work with the Dry Fit Dominoes , sizes 4 through 10 mm.
Please note - this bracket was designed specifically for the DELL version of the Mellanox ConnectX-4 NIC. Fits perfectly in the ThinkCentre M720q/920q/x, which is a common node in many home labs.
I designed these for a customer for his model trucks. no supports needed, print at .2 layer height, 15% infill
I designed these for a customer for his model trucks. no supports needed, print at .2 layer height, 15% infill
Print with outward facing/flat side down. Includes three holes for M3 threaded inserts to secure the bracket to the NIC and the case of the M720q. But it should also hold reasonably well without threaded inserts by securing the bracket…
Atomic model of FCC structure
This model was inspired by this work. Except I wanted it to use the side rails of the rackfinity system as well as have it printable on a Prusa Mini. So I designed my own version that fulfills those requirements. The back piece contains…
Für das Lenovo ThinkCentre m75q gen2 angepasst. Zudem mehr auf eine Wabenstruktur gesetzt um. Support wird nur für die hintere Fixierung des p340 benötigt. Für die Lenovo ThinkStation p340 angepasst. Zudem mehr auf eine Wabenstruktur…
Updated my 1" x 8TPI model to 1 ¼" x 8TPI at someone's requests. Setup to use a 1/4" centre punch but you could substitute the centre punch for a drill bit.
I designed these for a customer for his model trucks. no supports needed, print at .2 layer height, 15% infill
It's a very tight fit, and the SAS card is slightly unaligned but it fits, and it works \_(ツ)_/
After performing the https://github.com/badger707/m920q-dual-NVME mod on my M920Q, I needed a piece of plastic to retain the SSD. So I made this. Printing notes: These parts are very small, it's recommended to print both of them at the…
This model is compatible with the lego system.
I designed these for a customer for his model trucks. no supports needed, print at .2 layer height, 15% infill
This is a custom 3d printable centre console for your Gen2 Hilux/Surf/4runner. !Disclaimer! this is based on a manual swapped R151F gearbox Gearbox depicted and modelled around has had the transfer case shifter swapped with the A343F…
For all you dog lovers out there! Here is an alloy wheel centre cap in the shape of a dogs paw. It's designed for an Audi wheel that had a centre diameter of 56mm and the centre cap itself has an overall diameter of 68mm, however it…
Replace Studio Series Devastator's knee joints to centre the legs. Requires disassembly of thighs (4 screws). Direct replacement for stock parts, retains original functionality.
I have a steel centre punch that I often use to mark wood for drilling (a slight indentation keeps the drill bit in the correct spot, especially on hardwood or plastic where it can wander at the start). To make it easier to exert force on…
BBS wheel centre caps with logo lada Print: Support: yes Material: PLA or PET-G or ASA noozle: 0.4mm Category: Automotive
I designed ad print a centre console for our Grenadier Group, but that wasn't geeky enough for the Maker Grenadier owner. Now you can customise your centre console for anything needed and keep it put in your Trialmaster with magnets. I…
mark boards up to 40mm thickness --------------------------- Bretter bis 40mm dicke markieren Update 2022-04-10 nach Hinweis die Aufnahme verlängert extend socket after a hint Hülse kann ausgetauscht werden je nach Stift-Art replaceable…
Custom lid for the BMW i3 Centre Console with integrated MagSafe puck mount and key holder. The model includes an extra hole for cable passthrough, allowing you to route an additional wire (charger, GPS, etc.) into the console. Best fit…
This is a wheel centre cap that i designed for my Mitsubishi evo 9 wagon. It fit a little loose for me (but good enough that i didn't bother reprinting) so you may want to play around with the scaling. i recommend print with the logo…
3d Printed Dipole insulator Light-weight and ideal for temporary portable operation with some wire and zip ties. Recently tested and used with a 80m doublet used portable during a 24 hour contest. Print Settings Printer Brand: RepRap…
Création avec le logo Apple pour mon fils qui avait perdu le sien ;-) Creation with the Apple logo for my son who had lost his ;-) Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No Resolution: 0.12 Infill:…
Base Centred Orthorhombic Crystal Structure Added support from base centred atom to bed. Remove after printing. Printing Temperature: 230 C Bed Temperature: 60 C Infill: 20% For best results, print with a large brim. For the model here, a…
Designed for a Discovery 4 running 18" steel wheels from a new model Defender. These engage into the hub itself rather than the bore of the wheel. They tap in place easily. Designed as an alternative for the OEM hubcaps which lock onto…
Add-on connector pieces to centre knees of Studio Series 86 Devastator. Attach to stock figure with no modification necessary. Raises height of figure by approximately 1".
This is a remix of the “Lenovo ThinkCentre Tiny M920q 19-inch rack mount” by Mixmeister on Printables (model #1417569). The original design holds two Tiny systems side‑by‑side in 1U; this remix replaces the left slot with a front-panel…
For my friend's Jayco caravan, where one of the caps was missing that protects the axle grease from dust. For a wheel with six wheel nuts, where this hubcap is held on by three M6(?) bolts. The diameters of the holes for these are in the…
This custom 3D-printed bracket replaces the stock 2.5" SSD tray in Lenovo ThinkCentre M920 systems. It allows mounting of an mSATA SSD via a small adapter board, creating more room inside the case—ideal when paired with a PCIe NVMe riser…
I designed two different attachments for the live center for turning balls. The attachment simply attaches to the standard 60° center to clamp the workpiece without damaging it. Printed from TPU with 20% infill. Update: Added Modell…
Features * 180mm Bed Compatible: Designed to print diagonally on smaller printers (like the Prusa Mini). * Secure: Features a locking screw mechanism to prevent the PC from sliding out when cables are pulled. * Airflow: Configurable gap…
