Counting matching models…
— Updates — 27/08/2023 - Okay, I've had quite the busy year 😅 So I'm finally getting around to creating lower flow versions as well as looking at different threads and integrating washers for a tighter sealed fit. Should be around a month…
Print approx. €1.39–€1.70 excl. taxPreliminary estimate for PETGSource material: PET
Quick and easy-to-print mudguard, optimized to fit diagonally on your print bed. If you’d like to support my work, leaving a ♡ like ♥ or even buying me a coffee ☕ goes a long way. I love creating and sharing my designs, but my Mk2.5s is…
Print approx. €1.32–€1.62 excl. taxPreliminary estimate for one variant
Simple stencil best used with a brush. Thick enough for easy handling. Triangular projections are to help with orientation. Usage: For best results, use the points to help orient the stencil, then secure with painters tape. Use a paint…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
This is a remixed version of the original Recycling Fabrik MultiSpool, utilizing my Prusa Spool core for Recycling Fabrik Refills. The side pieces are thicker and the refill is held much tighter by the spool than by the original…
Print approx. €3.73–€4.55 excl. taxPreliminary estimate for one variant
Simple cleat wedges. I recommend printing with 100% infill. I've ridden 100 miles or so on an indoor bike with these to reduce nerve pain / compression. I haven't tested these on real outdoor road cycling but they're holding up well on my…
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for PETGSource material: PET
I wanted a way to store/display earrings. So I mad a upcycling Model for the Prusament spools. I used a suction cup to mount the holder on the mirror (as shown in the picture). I tried to print one in flex but it didn't work. There is a…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for PETGSource material: PET
Our municipality (Calgary, AB, Canada) asks for all bags to be placed inside of a single bag which is tied off. This means it must be kept separate until it is time to put the bin at the curb. This clip allows the “holding” bag to be…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
Have you been bothered by someone when your doing work? Have you been asked if this person left from the office? This Door Talker is the perfect item to have. This is used to go on to a Prusa spool and your able to switch between "Be Back…
Print approx. €3.07–€3.75 excl. taxPreliminary estimate for one variant
This is a replacement insert for wall-mounted kitchen foil or plastic wrap dispensers. The cardboard core of the roll slides onto the tube, allowing smooth rotation when dispensing foil or cling film. Dimensions: Tube diameter: 2.7 cm…
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
Great small gift idea for bike lovers or demo print for newcomers. Prints fast & Easy. The ones is the pic are 0.4Lh. If you feel this is too small for your liking, feel free to modify scale in your slicer software. This is very quick and…
Baking Paper / Cling Film / Aluminum Foil boxes holder for the kitchen. It fits <5cm rolls, <6.5cm and <7cm depending on the variant. There are two variant Short without floor Long with floor Both have holes to use a screw or they can be…
My desk was dominated by loose USB cables going to devboards. Trying to use velcro to bundle them left them floppy, and the cables stuck to each other and it was generally a bad scene. It was also hard to quickly extend the cables. So I…
Refill Spool für Filament von der Marke Recycling Fabrik. In dieser Version wird die Spool zusammen geschraubt und hält dadurch besser als in der Version von der Recycling Fabrik. Sehr stabile Refill Spool druckt in PETG um das Filament…
My goal was to create a simple model that requires no supports and would print in an acceptable amount of time. For this last requirement, I made the walls 1,8 mm thick (as I am using a 0,6 mm nozzle - you can safely set 0,6 mm line…
As mentioned in the title, it's a Laptop Riser! The hexagonal grid of the prusament spools makes very easy to attach some bolts and nuts to it. I was in need of a laptop riser that could release the neck pain of always looking down while…
Turn Empty Filament Boxes into Modular, Upcycled Storage Tired of throwing away empty filament boxes? This design transforms your used filament cardboard into something actually useful. Simply cut your filament box along the folding and…
Hallo zusammen, da ich viele leere, blaue SUNLU Refill-Spulen (V2) habe und keine Lust hatte, für die verschiedenen Farben der Refills von der Recyclingfabrik extra Spulen zu drucken, habe ich mit Fusion 360 einen Adapter entwickelt, um…
A cycling trophy inspired by Peter Sagan, thanks to him many people in our country started cycling, I am his compatriot and a big fan who likes cycling You have a choice of two trophy model bases, Simple or World Champion
This is what I call a Storing Maching, it's a robotic spool tower, which has a mecanism in it that open and closes the drawers via the rotation of a nema 17 Explanation Video : Download Files: Assembly Guide PDF…
Batterie Recycling Box mit Deckel zur Aufbewahrung von Altbatterien bis diese entsorgt werden können. --------------- ENGLISH -------------- Battery recycling box with lid to store used batteries until they can be disposed of. Print…
Just a basic double trash bag dispenser. Works best double sided taped to a wall. Dispenses standard kitchen size trash and recycling bags. Has slots to easily see how many bags are left. Prints easily with no supports or brim necessary.
MakerBot employee Johnathan Cook suggested embedding recycling symbols into the things we print. I think this is a really cool idea. I was able to take Johnathan's original JPG, trace it into an SVG in Inkscape, export to DXF files for…
Recycling Symbols / Codes for Shape Gallery in PrusaSlic3r (or others). Approximately 15 x 19 x 1 mm. PLA, PETG, PC, ABS, ASA, PA, TPU, PVB and more. Add to your Print as negative or positive Shape. Recycling Symbole /Codes für die…
SPD-SL road cycling cleat for cycling shoes. Modeled after the yellow cleats (which allow 6 degrees of free rotation). I have printed one and checked that it fits a matching pedal, but nothing more. I plan to use these for indoor cycling…
A simple remix of Freakadude's IPA Recycling Funnel. The spacer for it kept failing to print, so I made a funnel with the spacer integrated into it. It works really well with paper towels as a filter, but can also work with coffee filter…
slight remix (just organised per plate) of original for Box and cutter for various kitchen foils/films . Sizes organised per plat for 330mm and 390mm depending on what size you need
Mount on the wall with counter-sunk 3 or 4 mm then insert the shoe like a pedal. Features three 5 mm x 3 mm magnet recesses, that stick to the cleat bolts to provide extra bonding. It will actually hold the shoe quite well without these.
This cute turtle uses a bottle cap as a shell and can be used to store small rings, as a bathing toy, as a container for shampoo … there are many options :) 📄 Options / How to customize pre made stl files (see “files” sction) customize…
Uploading my "back catalog" to Prusa Printers! Hope you enjoy this design from 2018: As requested by my 3-year-old daughter: a recycling truck design inspired by the one that drives past our house every week! See it in action:…
To prevent the bubble level from getting trashed, which comes with every Ubiquiti Unifi Access Point, i designed this carrier thing for the bubble level to snap in. Print it with the slide-opening looking upwards with your most liked…
“Stick this explosive to any surface...or player!” While this model for the clinger grenade can't actually stick to anything, it is still really cool to print out and hold in your hand. I used a reference photo of the grenade and modeled…
UPDATED 2022-08-06 (v1.1) . TL;DR: Added small improvements, fully backwards compatible. See full changelog at the end of the description. This set of tools includes a set of STLs in the same size as those in PrusaSlicer, an OpenSCAD…
Festool Upcycling hand sanding block – Give your sanding pad a second life! What are you currently doing with old sanding pads? Turn them into something unique – print your own Festool hand sanding block and give them a second life. Don't…
Easily prints on an Ender3 in one piece.
tool for cutting and reusing Prusament Spool
Lid is printed top-down (it is oriented that way in the STL). You may want to print the first layer of the lid at a very low speed. I printed it at 10mm/s. This will help make sure the icon details come out cleanly, while only adding a…
Garmin-Style Tablet Holder (30°) for Indoor Cycling This Garmin-style tablet holder allows you to mount your tablet directly onto any standard Garmin quarter-turn mount during indoor cycling sessions. Perfect for Zwift, Rouvy,…
Simple but nicely looking and well working hooks to mount into your kitchen cupboard for holding the recycling bin bag open. Features an almost closed shape, to avoid the bin bag falling off, when it is still empty and light. The hooks…
This is a simple, yet good-looking, recycling bin for used batteries. The hole will accommodate a D size battery. Materials : Not really important, but copper silk PLA is the way to go if you want to mimic the Duracell look. Print…
This year I designed some cycling themed cycling ornaments. There are three basic types: Brands, Bikes, and Bike Inspired. The models are not sized for FDM printing. While some of them will print okay at the designed sized, I found that…
I've seen a bunch of these foil/kitchen roll holders, but all of them hold the rolls horizontally instead of vertically. This holder allows you to store up to 3 60mm x 60mm kitchen roll boxes vertically on the inside of a cabinet door…
This design was inspired by: https://www.printables.com/de/model/84374-cable-clinger/comments from Josh Myer ====================================================================== Settings: line width: 0.6mm infill: 10% Adheasion: You may…
Like my SPD-SL mount but for SPD. The hold isn't quite as secure as the SPD-SL variant so at least two of the 5 mm x 3 mm magnets are suggested to increasing the holding force.
A generic take on the OWC ClingOn . It helps to greatly reduce USB type C/Thunderbolt connector strain and provides friction to resist cables being inadvertently disconnected. Use a M2x20 hex socket or pan head screw to screw into OWC…
The symbol comes in two versions - one roughly 16cm in diameter and one roughly 8cm. Both are 5mm high and have a 9x4mm hole in each of the six components. The connectors between the components are intentionally very thin, to allow the…
Upcycling prusament empty spool into a turntable! Only what you need is a empty prusament spool. Assembly : - Print all Models. - Screw them together in base of pictures. - No additional screw and glue needed! HowToPrint : - Layer Height:…
Recycle your empty Prusament spools into beautiful table lamps with a retro touch! Customizable and easy assemby, no glue or screws required! Print instructions What you need: A led light strip (or any other light source that will fit and…
This remake is intended for the smaller rolls of plastic wrap that you get in a supermarket with flimsy cardboard. A handy holder for your plastic wrap, perfect for keeping your kitchen or pantry organized, especially if the cardboard box…
Festool Upcycling saw blade clock – Give your saw blade a second life! What are you currently doing with old saw blades? Turn them into something unique – print your own Festool saw blade clock and give them a second life. Don't have saw…
Wanted some cool prints to better distinguish the kitchen trash cans for recycling. Credits SVG files from the noun project under Creative Commons license. Recycled bottle by Made x Made Plastic bag and Trash by sripfoto Recycled paper by…
I got sick of my saddle bag rubbing my thighs on my road bikes and decided to use a tool bottle instead. I chose to design and print them instead of buying so that I can get extra modeling experience in Fusion360. Design is based on…
It comes in four sizes. Outer diameter 70 or 65mm. Single or dual version. This is a simple Trash & Garbage bag dispenser. I didn't find any one that had the kind of monting options I wanted. The design is simple but sturdy and is created…
These are all the 3D models I have designed and printed for my plastic extruder. You can find the full tutorial on Instructables by clicking the link below: https://www.instructables.com/Low-Cost-Plastic-Extruder-for-Fillament-Production/…
Two drawer container designed to deal with mess related to nail glitter application. It allows to recycle unused glitter. Wife's happy ;) Print without support as shown below. If you have problem with lifting corners add brim. If you…
I was thinking about how to recycle my empty spools and have decided to make a small parts storage from them. Good way to use up those “only little left” spools, too. There are two different models, one with a separating wall in the…
once you are done with your prusament you might as well use the nice box for sorting you spare parts or others. with these modules you can make your own sorting box out of a prusament box, with whatever module sizes you want. they fit in…
Für die Fertigstellung der Uhr wird neben den gedruckten Teilen noch folgendes benötigt: 1 Seitenteil einer Prusament-Spule Quarzuhr Uhrwerk mit einer 28mm langen Welle:…
This is my version of PET bottle recycler gear reduction machine designed to pull and wind string made from recycled PET bottles. you can see assembling process here: parts you need: Screw M3x20 Screw M3x10 Bearing 608 4x 8mm shaft 2x
You have to scale to 1500% to fit it on your face. Hope you use it properly. If you have a comment let me know.
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Battery recycling container fashioned as an oversized pill…
Put your old physical media racks to use again! This fully parametric drawer generator will generate drawers with user specified dimensions and compartments. It has been programmed to maximize strength while minimizing material and…
Interchangeable nozzles that serve their own purposes, and allow a old 2 liter pop bottle to find a new purpose after its original use by easily screwing onto the top. These all add length in order to make watering plants less cumbersome,…
I was unconfortable with the alen key "only" so after the buld i printed some handle to have an hex screwdriver and btw i had too many allen key alone in a box tho.... you can after "cut" the small part with a dremel or other rotary tool…
My wife needed a holder for various cylindrical shaped objects under our sink. Print sideways. Very sturdy. 100% infill / 3 contours. PLA or PETG Happy printing
Every couple years I break my tradition and design something useful. After switching to a bin with three separate compartments I decided to create a set of signs for them. Not to be over organized but it just soothed my OCD so well. :)…
This was my first project in CAD / Onshape, made from scratch. The goal was simple, make a fun and easy to print Recycling box for the batteries. It prints in 3 parts to make it easy to print without any supports and make it possible for…
Medal for cyclists. I made it as a remix for my kids. I was surprised by how difficult is to get any medal with the cyclist motive, so I have decided to do my own remix. I hope that will help also somebody else.
Introducing the Battery Buddy: Your Recycling Sidekick! Are you tired of old batteries cluttering your space, unsure of how to dispose of them responsibly? Say hello to the Battery Buddy, your trusty companion for eco-friendly battery…
Recyclingbox für Batterien Sammelbehälter für alte Batterien. Als Scharnierbolzen dient eine abgeschnittene Büroklammer, diese kann am Gehäuse oder Deckel dann mit einen Tropfen Sekundenkleber befestigt werden. Drucken aus PLA oder für…
Empty Spool and just a little bit of Filament left?! So keep reading ;D What do we need? Empty Spools Some leftover Filament for the railing 3D Printed Parts (MMU2´s or Singleextruder) Some leftover screws (M3x17) and a screwdriver (that…
Deposit on cans got introduced in my country. I needed a way to easily bring them in for recycling without spilling everywhere. It's possible to slide, or click the cans in/out of the holder. Modeled for 330ml (⌀66mm) cans with a 54mm rim…
No required support. Shimano road cycling Cleat SM-SH10 SM-SH11 SM-SH12
Replaces a 13 mm diameter lid pin holder Print instructions Category: Replacement Parts Summary Replaces a 13 mm diameter lid pin holder Print Settings Printer: Prusa i3 Rafts: No Supports: No Infill: 50 Filament: eSun Pla Notes: Print…
Adapter plug to use generic cling film in Wrapmaster 1000. Print in PLA with 0.28 layer height and 20% infill. 3mf-file is for Ultimaker Cura and settings is for Flashforge Adventurer 3…
This adapter enables you to use your old Prusament spools as a Multispool for filament refills of the “Recycling Fabrik” https://www.recyclingfabrik.com It is a sturdy and long lasting alternative to fully printed spools and the refill is…
Cycling Glasses Mount – Keep Your Glasses Organized and Easily Accessible A simple yet effective solution for keeping your cycling glasses secure and tidy. This mount is designed to hold larger glasses with up to 80mm depth, ensuring a…
I built off of @corbul0's model to repurpose it for drink containers which are more useful for me: nalgene bottles and cycling water bottles. Nalgene's just sorta flop over in the OEM cupholder as the cupholder base is too small, and I…
90° version of my stackable spool storage system with 4 drawers. you can find the 120° version with 3 drawers here: https://www.printables.com/model/221860-spool-upcycling-make-a-stackable-storage-for-your- drill-gauge is included. Model…
This bracket is designed to make a spice rack using 4 disposable Chopsticks. We had many of these disposable sticks that come with Asian takeaway food and thought this would be a good way to upcycle some of them. Details The bracket has 4…
I needed some signs for the bins in my kitchen, so I made some from open source icons I scaled them down to ⅔ size, because I made them a bit too large, but they can be scaled to your needs (base size: 120mm diameter, 3mm height) If you…
I have identical bins - 1 for recycling and 1 for general trash - so I worked up these quick print symbols to glue on the top of the bins so I'll know which is which.
The model utilizes old 'spectrum filament' spools with a total height of approximately 65mm, a radius of approximately 100mm, and an inner hole radius of approximately 26mm. Using the model for other spools may require remixing. I use 608…
I got a carbon bike from FB marketplace and missed this cap. So I made one. I suggest to print PETG or ABS. PLA might deform in hot environment. Needs an M6 bolt with allen key and an M6 nut. Print with 4-8 walls and 30% infill. Probably…
When I first assembled my Petamentor I noticed that even though the puller was screwed to the motor it sometimes can skip. After some tinkering I noticed that even with a 7rpm motor (JGB37-520 12v 7rpm) I can't lower the speed enough to…
I made this because the extra parts from prints (supports, brims, etc.) were cluttering up my workspace. So, I decided I would make a recycle bin with my printer. This is the result, and I feel it works quite well. The large one is…
Garmin Edge 1050 Extension mount moves the computer 8-10 mm forward so you can use your current mount. I added holes, so threaded insurance could be added, and you could use the female Garmin mount of your choice. I printed these holes…
Symbols Paper Filament Plastic Not recyclable Glass Biodegradable Credits SVG files from the noun project under Creative Commons license. Cross by Three Six Five 3d printing filament by Desireé Bolívar Paper by Mada Creative glass by…
A simple sorting sign for trash or recycling bins. Added options with and without text. This is a remix of the simple labels by ph3nx11 I added a backing to make it printable and peaceable in one piece. I also added an extended version…
Cycling / Sports Bottle Storage for 6x standard cycling drink bottles. Testing with 500ml 750ml and 1000ml bottle sizes.
With some additional parts you can make a perfect cable spool of a empty Prusament spool. It is made with bearings and rock solid. For example capable of holding 30m patch cable or what ever you like! Print instructions <!DOCTYPE HTML…
Batterie Recycling Box Schiebeverschluss 90X92X120mm Achtung: Version 1 und 2 sind leicht unterschiedlich. Tip: Vor dem ersten Zusammensetzen, die obere Kante des Bodies leicht anfeilen um Unebenheiten zu glätten und die Gängigkeit zu…
I like having somewhere to put dead batteries until I can take them to be recycled. So I made this little bin that looks like a battery. It has a twist-off lid and should store a decent number of batteries. If you live in the US, you can…
This is the fortnite cluster clinger grenade. pegs for assembly on individual models. print 4x wing and 4x munition models.
Very sturdy computer mount on the headset of the bike. Uses existing insert or print the one I provided (universal for wahoo or garmin). For garmin have the screws vertical, for wahoo horizontal. There are multiple files, so what is…
Suitable for 31.8mm diameter round handlebars with handlebar clap width of max. 40mm. Use a rubberband to connect latch an pin to hold tablet safely in place. You can also put additional rubber or foam parts between tablet and holder, up…
Update 20211218: Unterer Einsatz mit 8 Einteilungen erstellt und hochgeladen Mal wieder aus der Not eine Tugend gemacht. Damit die Kleinteile rund um den PRUSA 3D-Drucker verräumt sind, habe ich diese Sortiment-Boxen entwickelt. Erst…
Male part of a plastic buckle on a Lazer cycling helmet broke, so I made this as a replacement. I have been using this for a while and it seems to work just as well as the original. Instructions I assume many helmets have the same size…
Printed on a Ender 3 with Sunlu PLA+ Broomstick ⌀ ≃ 24mm Done in Sketchup, feel free to edit the original file do accomodate different stick/dowel size. You need to scale the model down by 0.10 before exporting them to .STL. Contain a…
