57 models
Factory backcover modelled for DIY installation Angled backcover - https://www.printables.com/model/725307-ecobee-smart-sensor-angled-back-cover
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Modified back cover for ecobee smart sensor to wall mount around 10 degree angled If you want the base model to modify for your need follow the link below https://www.printables.com/model/725330-ecobee-smartsensor-backcover
Print approx. €0.16–€0.19 excl. taxPreliminary estimate for one variant
Replacement stand for Ecobee SmartSensors. The stand press fits into the bottom of the sensor. Optional 3mm diameter magnet can be placed in the center.
Warning : I noticed that Ecobee changed the design of their smart sensor. I only could look at pictures of the new sensor and the back looks much more spherical, it probably won't be compatible with this wall mount. I used the original…
These are wedges to mount Ecobee Smart Sensors (not the Room Sensor) at a different angle than Ecobee intended. These will point the face of the Smart Sensor at 90 degrees and 100 degrees from the mounting surface. Ecobee recommends…
Switched from google nest to ecobee so I needed a new trim plate. There are two versions. One is flat and the other is slightly rounded.
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Lots of people complain about the appearance of the Ecobee. I think it has to do with the giant white circle around the unit, and the fact it hangs off the wall so far. Every day I looked at my Ecobee, it bothered me. So I solved the…
I recommend printing with a .10 mm layer height to ensure the fine details print properly. No support was needed.
The folks who installed the thermostat before I moved in labelled the wall plate with their business info. I guess they thought their advertising was more important than aesthetics! Anyway, I re-designed the plate so, if in the future I…
My daughter need a pen holder for school, and likes the crumpled paper bag look. I just resized it. I take no credit for the model other than putting it to different uses, also makes a great vase. Dimensions are now 65x74 and 100mm tall…
A trim ring that mounts on a standard electrical box and provides a mounting surface for the Ecobee thermostat. The Ecobee mounts via 4 M3 threaded inserts. I'm using the ‘enhanced’ version of the Ecobee. It may fit others, but I haven't…
I designed this to strap Ecobee's temperature sensor to a bassinet so the room's temperature is tailored to the baby. Print with supports and extra outer layers for best results.
This is a simple sit-in wall mount for the newer, more rounded style of Ecobee SmartSensor. It has a recess in the inside bottom for an 8mm x 2.5mm magnet (optional, just for a more secure hold). I used a 3M command strip (from a Small…
I'm using Ecobee room sensors (the older style) as motion detectors and wanted to be able to adjust where they point. I have designed the mount to articulate in 2 dimensions, which combined with the way the sensor rotates around the cover…
FASTPRINT FDM 0,3Layer optimized THE Displacement Texture is Homemade and included Why i am using Orange Basematerial ?? Imagin at the GameNight everyone brings 20Tiles 6People =120 tiles And at the End you can Take your own as marked…
Vous retrouverez le corps du stylos BIC sur la publication de Coben, ici seul les personnalisations sont disponnibles. Instagram : @roiku3D
This model functions as a small shelf to place the Ecobee SmartSensor using the provided table mount base. The design allows for the use of one #8 (or M4) round head screw or a 3M Command Strip. I intended to wall-mount one of the…
The kind folks at the local HVAC shop decided I needed to be reminded of their existence by stamping the wall plate of the thermostat with their business name and phone number. Additionally, the wall plate is MASSIVE. In order to generate…
Jakubovské krmítko slouží jako přímé propojení krmítka se včelím tělesem. Krmítko je nasazeno na strop úlu a pomocí středového průlezu se včely dostávají do prostoru krmítka. Součástí modelu je pouze středový průlez krmítka s maticí.…
I made a snap-in mount for our 4 probe rigol 1074Z It works very well. OpenSCAD source is also available here. Enjoy :* Category: Electronics
Ecobee Sensor Angled Corner Mount. Does not require supports.
A replacement stand for the Smart Sensor
A simple frame to go around the Ecobee thermostat. Has 2 hooks at the bottom.
This Ecobee premium wall plate is designed to work with 1-gang US standard outlet. Use OD 6mm heat insert to fasten the ecobee wiring connector backplate.
Minor remix of this model: https://www.thingiverse.com/thing:4934327 Printed on MK4S in PLA, .4mm nozzle, .2mm layer height, 25% adaptive cubic infill
Saw a lot of them out there for other companies and nothing for EcoBee. since I needed it to stand vertical because of the motion sensor made one with a slight change. only needed supports
Recently upgraded my main thermostat to a EcoBee 4, so I had a “Spare” Ecobee 3… After rewiring the IR tube heater in the garage I needed a way to surface mount the stat/wire as going through the drywall at this time wasn't a option.…
Printed on a MK3 w/ 0.2mm nozzle using Esun PLA+. Found I had to sometimes use a flat edge to dislodge the upper and lower parts to allow it to swivel freely, but this may be solved by reducing the nozzle temperature. Allowed me to…
For some unknown reason, developer decided to place the thermostat on the wall in master bedroom. It wasn't a problem until I replaced an original “dumb” thermostat with ecobee 3 Lite. ecobee 3 Lite has a bad habit of flashing the screen…
Simple sun-blocking frame for Ecobee Smart Thermostat Premium. Direct sunlight on the thermostat can greatly impact temp readings, use this to reduce the impact.
So, it doesn't seem that long ago, but after upgrading my main thermostat to a Ecobee 4 I was the lucky recipient of a Ecobee premium stat… So naturally the 4 replaced the 3, and needed the same kind of wall spacer surface mount. After…
A basic replacement. Meant to be printed on its back as oriented without supports. I found this a tricky print just due to the design of the Ecobee retention slot itself. I had to reprint and adjust dimensions by 0.1mm several times to…
Vidéo disponible sur mon compte Art3Dchoix => https://www.instagram.com/art3dchoix/ Sous-bocks de COBEN en plusieurs parties pour que ce soit facile à imprimer. Dans les années 90 on collectionné les POG qui étaient dans la même idée. En…
Impresso em ABS
I needed to create a stronger mount for the Ecobee thermostat, as the wall had multiple holes from previous installations. I used PLA because it was what I had available, but using PLA+ or another material might have been a better choice.…
This is an adapter plate to mount an Ecobee smart thermostat to a 2 gang electrical box using the original included hardware that was intended to mount to a wall. Suggested Print Settings: 4 walls 5 top and bottom layers
The Ideaformer Cobees is an awful printer and if you own one, you have my sympathy. I tried to warn you, but my review never got much traction. This never-quite-completed project was my attempt to salvage what I could from the thing and…
Large trim plate made for Ecobee with voice control Might also work for other models
Je vous presente le logo de l'entreprise Coben.Shop dirigé par le “Tiktokeur” Co.ben sur ce reseau social ! Logo simple est facile a imprimer !!! j'espere qu'il te plaira lache un like !!!
Cobertura para pantalla de arco quirúrgico SCOPIA con colgadores. Pieza de PLA o TPU.
Jacobethan is an architectural model of a real Jacobethan era building, ideal for accurate historical architecture displays; it is designed as a detailed structure reference for model builders. Use it for dioramas, tabletop scenes,…
Attached to a basement support column using a Velcro strap. Part has routing for cables and room for wire breakout on the back.
Replaced a large thermostat with the Ecobee unit. Instead of purchasing a base plate, designed my own. I designed this to be printed with the visible side down so that it has a nice texture when printed on a textured build plate. Could…
Este diseño es un cobertor para el teclado de un portatil hp-14 con sus soportes
A veces necesitamos dejar prolija alguna unión entre cables y esta es una buena idea para cubrir dichas soldaduras.
I get annoyed whenever I get low battery or frequent disconnections from my Ecobee room sensors. This print is a conversion from CR2032 style batteries to AAA batteries. This project requires an electrical solder. The AAA battery housing…
Holder for Ecobee battery powered motion and temperature sensor with a variable angle option. Note, the two tone print you see here is simply because I wanted to use up my remaining spool of black filament. It does kind of nicely…
A minimalist under-bed cover to hide a small power supply/LED driver and its cables for bed-bottom lighting. The box includes two mounting tabs so you can fasten it to the bed frame or skirting and keep everything out of sight. One side…
This remix version of the original has 4 holes that allow for installation on an electrical box. The 2 additional holes are 90 degrees from each other to allow for easy leveling of the plate on a non-leveled electrical box. The 3D model…
So, it doesn't seem that long ago, but after upgrading my main thermostat to a Ecobee 4 I was the lucky recipient of a Ecobee premium stat… So naturally the 4 replaced the 3, and needed the same kind of wall spacer surface mount. After…
This is an adapter plate to mount an Ecobee smart thermostat to a 2 gang electrical box using the original included hardware that was intended to mount to a wall. Suggested Print Settings: 4 walls 5 top and bottom layers
The kind folks at the local HVAC shop decided I needed to be reminded of their existence by stamping the wall plate of the thermostat with their business name and phone number. Additionally, the wall plate is MASSIVE. In order to generate…
