318 models
New key features of CORE One+ Automatic grille opening adjusts the chamber ventilation based on the internal temperature. This ensures that the environment is optimal for the materials being printed, helping to reduce warping and improve…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Here is my take on the Prusa CORE One MMU3 —introducing the Community version ! This setup mounts the entire MMU3 unit directly on top of the printer, with an integrated buffer and spool holders. In addition to the printed parts (you'll…
Print approx. €1.15–€1.40 excl. taxPreliminary estimate for PETGSource material: PET
Are you a Prusa 3D community member and proud to show it to everyone? When you are sitting in traffic, make sure everyone knows you are going home to the best printer out there with this Prusa 3D license plate holder. Sized for US license…
Print approx. €4.12–€5.04 excl. taxPreliminary estimate for one variant
The Recreator3D.com Community Bottle Dryer Prints on a 200x200 Bed Uses a 40MM Fan for Air Circulation To Power the Fan, Use a 5 Volt Fan and Wire it into a 5 Volt Power Cord for a Phone Charger or equivalent. Just make sure to use a…
Print approx. €10.99–€13.43 excl. taxPreliminary estimate for one variant
(Edit: I finally learned how to intrude text to objects, so I have removed the Project files, and you can create your own. Basically everything is printed on 0.20mm STRUCTURAL and 15% infill, with a 0.4 nozzle in PETG.) 2 sets of…
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for PETGSource material: PET
General description This case is designed to contains the parts used in this kit: https://sensor.community/en/sensors/airrohr/ NodeMCU v3 (ESP8266) sds011 particule sensor BME280 temperature sensor This box is designed for outdoor use…
Print approx. €3.69–€4.51 excl. taxPreliminary estimate for PETGSource material: PET
Calling all Pokémon GO Community Day organizers and passionate trainers! Elevate your Slowpoke Community Day meetup with these captivating 3D-printable Pokémon-inspired coin models. Resembling the iconic coins used in Pokémon TCG matches,…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
This mod is a compilation of small contributions that I combined to update the MMU3 CM to the latest version of platform and allow the automatic vent opening and closing. STEP file? Yes. The vent has been remodeled form the ground up and…
Print approx. €1.21–€1.48 excl. taxPreliminary estimate for PETGSource material: PET
Calling all Pokémon GO Community Day organizers and passionate trainers! Elevate your Noibat Community Day meetup with these captivating 3D-printable Pokémon-inspired coin models. Resembling the iconic coins used in Pokémon TCG matches,…
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Calling all Pokémon GO Community Day organizers and passionate trainers! Elevate your Fennekin Community Day meetup with these captivating 3D-printable Pokémon-inspired coin models. Resembling the iconic coins used in Pokémon TCG matches,…
Print approx. €1.72–€2.10 excl. taxPreliminary estimate for one variant
I noticed the builds of PrusaGuy, 3DMakerNoob and Sam and noticed some strange solutions. For one the platform they make in all their builds seems useless to me. There is a plate already with the top cover. So lets just make a small hole…
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for PETGSource material: PET
Calling all Pokémon GO Community Day organizers and passionate trainers! Elevate your Chespin Community Day meetup with these captivating 3D-printable Pokémon-inspired coin models. Resembling the iconic coins used in Pokémon TCG matches,…
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Added Gcode for generic PLA and 10% infill . Letter height is 1cm and length of word social is 20cm fits Prusa mini bed ;) hand nicely on fridge or whiteboard
Print approx. €1.57–€1.91 excl. taxPreliminary estimate for one variant
The base, stand, & cargo box are 3D printed 15% infill 0.4 nozzle. The truck part is a Hot Wheels that was painted & attached to post with a screw.
Print approx. €5.65–€6.91 excl. taxPreliminary estimate for one variant
Simple remix that adds ledges half way up the riser so the glass will slide in on top of for easy ventilation when printing PLA. Add LED lighting or stick cheap under cabinet lights to the bottom of the AMS for a simple lighting solution.…
Recreator3D.com – Turning PET1 Bottles into Filament with Repurposed 3D Printers We’re not just recycling—we’re recreating . At Recreator3D.com , we’re transforming PET1 plastic bottles into high-quality 3D printing filament using…
Also available through the opencentauri CAD github Live interactive model you can link into Fusion 360 on the Opencetauri Docs . Community Centauri Carbon CAD model with many contributions from in the Opencentauri server as well as…
CHANGELOG Main Instructions follow. 30/10/25 - Added spoolholder_spindle_mk4, spoolholder_roller_mk4 and buffer_mk4 by request. To keep things simple, these versions cut away some material to get them to fit on a MK4 bed. Reported to…
Made some major changes in V2 with suggestions from @MediaMan3D. The focus here was to eliminate plastic from the sides, have the front weight load of the AMS rest on the front corners versus relying on a bow joint, and added some wire…
I remixed the model to accept larger 608 bearings, as they were easier for me to grind flat with their larger size.
STOP!!! If you don't choose to participate in what is considered a BETA print. Follow this link to known working files. https://www.printables.com/model/179820-the-recreator-3d-mk5kit-ender3-diy-3d-printer-fila BELOW …is the BETA Step…
Update 1-6-24 This is designed tight to specifications, so if you want wiggle room or are using filaments that shrink like ABS, please take this into account. Please calibrate and dry your filament prior to printing. Please calibrate your…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, buying me a coffee would be a wonderful show of support! Good quality designs take time, skill, and CAFFEINE! ;-) And then check out my other models for…
After assembling Sam's very tidy MMU3 Community version, I decided to make a few slight modifications to save space on the width of the whole unit. The main modifications are: Buffer Cover: Reduced width by around 2mm. This saved some…
I made All the measures at once ! I only tested 6mm 9mm 10mm 11mm If you test other measures please give feedback!
It was designed to fit the recreator based on ENDER3 To view the assembly process: Video Working process: !THIS IS BETA MATERIAL! if you test it give your feedback To edit the file in Fusion you have to have this plug-in installed!…
The CORE One Mini is out :) - if you don't know what you are looking at, make sure to check out this article: CORE One Mini - The Rocky Road to a Prototype The machine is not an offical Prusa product but built in a way, that it closely…
Original design here: https://www.thingiverse.com/thing:6186432 I really like the design and idea from dalia5. I remixed theirs. Some items in this remix: - Increased tolerances - reinforced cutters - guides 'snap' into place - penny…
instead of rollers i use a knife you also need 3 M3x8mm screws/bolts
Hello Fellow Bambu Lab Fans! Check out V2 here: https://www.printables.com/model/535282-v2-update-bambu-lab-ultimate-p1p-x1-c-riserams-sta Public design on OnShape - A beginning of a vision... Looking for community help from designers and…
Fixed the "V2 Vented Remix - Updated Bambu Lab Ultimate P1P P1S X1-C Riser+AMS Stand - Community Build!"
The original models posted by @PrusaGuy are optimized to work with Prusament spools, however other spools are not guaranteed to be compatible. My modified models allow PrintedSolid Jessie, Push Plastic, and Atomic spools to function in…
A requested foregrip design from our community poll. Hardware: 2x m4 30mm bolts (Pan head or button head are best) 2x m4 nuts Thank you, all who responded to our poll. We will be creating more soon. If you would like to participate in the…
The Recreator3D.com Community Bottle Dryer V2 is made for smaller build volumes . No longer limited to size! Very interchangeable and easy to alter for your varying bottle sizes . Easy to put together. Some strong glue is suggested to…
I PAID FOR THE WHOLE PRINTER SO I'M GONNA USE THE WHOLE PRINTER ahem Not to be left out of all the fun that the other CORE One+ users get, this replacement vent grille for the community version of the CORE One MMU3 has an arm that enables…
MODEL DETAILS As you most likely know, Sanjay Mortimer, our dear friend and co-founder of E3D, tragically passed away last year, at just 32 years of age. This was a massive blow to us here at E3D, but Sanjay’s reach was global, and news…
Mirror of the Opencentauri CC1+CANVAS CAD model available on the OC CAD github for greater visibility. Printables rewards from downloads are donated to OC project crew. A live viewer available on the OC Docs website The base CC1 model is…
360° Cooling for your MK3xx Extruder! Conversion of the MK3S+/MK3.5/S extruder to the new MK4S pressure fan update Dec28, 2025: I no longer own an MK3 printer so I am not able to continue working. If your shroud gets pressed down a bit,…
Hey all, Here is my remix on the Prusa CORE One MMU3 Community version von Prusa Guy and combine it with the incredible MMU3 / MMU2S 5 Spools auto rewinder adapter for (un)original Prusa drybox / Repbox von Sanka . I really like the MMU3…
I had a number of 250g and 300g spools of filament that I wanted to use with my Bambulabs X1 Carbon in the AMS. These are too small to work in the AMS, so I designed in Fusion 360 a simple 3 part spool adapter, that using a bar with an…
Mirror of the Opencentauri CC1+CANVAS CAD model available on the OC CAD github for greater visibility. Printables rewards from downloads are donated to OC project crew. A live viewer available on the OC Docs website The base CC1 model and…
📄 OpenDTU Zerosolar PCB A compact enclosure specifically designed for the OpenDTU Community Board (SZ-OpenCB-V.5_0 by Nick Förster) with pre-soldered CMT2300A module – ideal for PV monitoring setups requiring minimal space and clean…
Coin designed for Pokemon Go community day Classic. Coin reflects selected Pokemon for community day July 5th and 6th 2025. Front shows Eevee and back shows the Eevee evolution. Glue coin halves together after printing. Paint if desired.…
Update: Realized the original file uploaded was set to an incorrect thickness and the coins came out a bit thin. I have corrected this to the proper 2.5mm thickness for each half. Coin made up to give away at local meet up. Coin reflects…
Needs supports
A clean, functional, and easy-to-print back hole cover for the Prusa CORE One MMU3 Community Version, also tested and confirmed to work with the Ultimulti MMU3 setup. This design completely covers the rear pass-through hole, helping to…
A free parametric enclosure generator for electronics projects built on OpenSCAD + BOSL2 . One file — any enclosure you need. Set your dimensions, pick connector types, choose a lid fastening — hit F6. No manual CAD work required. --- ⏱…
This is a remix of the Community Cutter for The Recreator 3D and PPU3D. This is the “Bottle Cutter Top - 8mm” and uses UK 1 Pence pieces in place of the US cent/dime that is used in the original model. According to The Royal Mint, the One…
Remodeled puck as close as possible. Also adding a STEP file to make it easier for people to remix. v2 has closer dimensions to original, extra holes (for m4 in the future probably?) and deeper holes for inserts/screws
Everybody loves pizza! So why not printing one? This is a community project for you, your kids, family, friends... It goes beyond printing, it's about creating, sharing and even cooking! Cat3D had this beautiful idea during a live stream,…
Made to facilitate mounting the lead screw without needing some sort of adapter. Having an early ender 3, the lead screw nut does not feature 4 mounting holes. Therefore, I remixed HumbleDeer's SETP file to accomodate this nut. The…
I don't like the original model being split into two pieces and I like one piece version from Kevin Mardirossian but cannot be printed on Prusa Core One. The remix couldn't be printed flat and was difficult to print with supports. I…
Although intended to be printed flat, on a larger bed, it is also possible to stand the vent up vertically and print it on the Core One like @Ondrashek has shown.
I didn't like the fact that a large opening is on the top. Temperature would escape, and debrees of the filament cutter could fall into the build chamber, that's why I designed this cover. Use Structural settings, fast settings would lead…
Mirror of the Opencentauri CANVAS CAD model available on the OC CAD github for greater visibility. Printables rewards from downloads are donated to OC project crew. A live viewer available on the OC Docs website The base CC1 model is also…
Community Spool Holder Primarily for Joined PET#1 Filament. Wide Core to stop joined filament from breaking. Enlarged from the mini bottle strip spooler. Uses a M5x8 screws to hold the top onto the bottom. The top of the case is glued to…
Coin designed for Pokemon Go community day. Coin reflects selected Pokemon for community day October. Front shows Charmander and back shows the Charmanader evolution. Glue coin halves together after printing. Paint if desired. Additional…
When using the community bottle cutter, I noticed the base was only secured with 2 screws, causing it to flex upwards and have unnecessary strain. This model fixes the issue by adding 2 more mounting holes to the base.
This is my humble contribution to the core one MMU3 community version, taking inspiration from Core One MMU3 community version - rewind spool remix with a different fixation system. Note: I did not exactly remixed the rewind spool parts…
Coin designed for Pokemon Go community day. Coin reflects selected Pokemon for community day August 14th & 15th. Front shows Eevee and back shows the Eevee evolution. Glue coin halves together after printing. Paint if desired. Additional…
Hello Together I have modified this fantastic spool holder. Now it can also be used for Mk3/mk4. It also saves space and makes it easier to feed the filament. I also extended the roll guide by 12 mm, so that larger filament rolls would…
For me it's easier to resource 624 type bearings as I have them on stock. Additionally I prefer to have a more defined position of the bearing and a washer between the bearing and the door body, to enable free spin. since M4 is used, a…
🚀 Space Explorer Kit Card – LM 2025 Community Print Drive 🌌 Take off on an interstellar adventure with this space-themed 3D printed kit card! Inside, kids will find a rocket ship, astronaut, alien, and UFO – all ready for imaginative…
I designed these fan ducts in hopes of providing the design with both a more efficient duct and eliminating the guess work of aligning the ducts. Since I don't have the time right now to properly test those ducts and i don't know CFD…
This screen can contain additional sensors, not only described in sensor community manual (GPS, OLED/LED display etc). PCB board Also you can use compact and convenient PCB board for connecting components used in the Sensor Community…
The top part of the bottle cutter for the Danish 1 KR
This remix has the model entirely redrawn as a solid body. The model present in the MK5KIT r2 assembly is a converted mesh file, and not a true solid body. This version is a solid model recreated as faithfully as possible with a few…
Small Rugged case- Community Chest (inspired) Will require: 6 x M3x30mm screws IMPORTANT: Check that your slicer part position and height. My slicer is Bambu Studio . Cura might not position it correctly on plate.
Highway Sign specifically for the 2024 Community Print Drive. Original design for the 2024 Christmas Community Print Drive . The “Highway Sign” insert prints flat and is set up for a filament swap for the lettering and border. The “Base”…
Coin designed for Pokemon Go community day. Coin reflects selected Pokemon for community day January 5th 2025. Front shows Sprigatito and back shows the Sprigatito evolution. Glue coin halves together after printing. Paint if desired.…
The Recreator3D community cutter works well for cutting PET bottles for pultrusion recycling, but normally needs labor-intensive disassembly and reassembly to swap out the top part for different cutting depths, making it difficult to…
After printing and assembling Dustin's design I discovered that between my print settings and the thickness of the bottles I was trying to cut the plastic strip was forcing the bearings apart rather than being cut by them. I added a rib…
Coin designed for Pokemon Go community day classic. Coin reflects selected Pokemon for community day classic September 2nd 2023. Front shows Charmander and back shows the Charmander evolution. Glue coin halves together after printing.…
I made this simple small insert so cardboard filament spools will fit in the Prusa Core One MMU3 Community Edition (https://www.printables.com/model/1295332-prusa-core-one-mmu3-community-version ) stock spool holders. I found that my…
A commemorative coin for Pokémon GO Roggenrola Community Day. Design inspired by Pokémon TCG coins, but done from scratch. This is a version with the logo of my community on the back, with Roggenrola on the front. I'll upload a version…
Coin made up to give away at local meet up. Coin reflects selected Pokemon for community day July 21St 2019. Front shows Mudkip and back shows the Mudkip evolution. Glue coin halves together after printing. Paint if desired. Additional…
Coin designed for Pokemon Go community day. Coin reflects selected Pokemon for community day August 13th 2023. Front shows Froakie and back shows the Froakie evolution. Glue coin halves together after printing. Paint if desired.…
Original patch by DTHLSS on reddit . Today, we honor a hero, a frend. Lore :…
Next installment of my PokemonGo community day coins. May 2018 premiers Charmander! Print, glue, paint Print Settings Printer: Select Mini Rafts: No Supports: No Category: Toys & Games
Community TV show Greendale School motto in a simple ornament design. Design is simple and the lettering is made so that light shining through from back will bring out the wording. Print instructions Simple design means you choose how it…
If for some reason you don't have a 4mm collet but have access to a 6mm one, you can print my remix for the door and buffer door.
2nd coin project for 3rd Pokemon Go community day. I have uploaded a plain coin front and back if you want to print for community day in your area. Print each side, glue, then paint if desired. Print Settings Printer: Select Mini Rafts:…
Coin designed for Pokemon Go community day. Coin reflects selected Pokemon for community day January 6th 2024. Front shows Rowlet and back shows the Rowlet evolution. Glue coin halves together after printing. Paint if desired. Additional…
Replaces the TR8x8 leadscrew & nut with an M6 rod. Uses an M6 nut. Optional retainer ring.
Coin designed for Pokemon Go community day. Coin reflects selected Pokemon for community day September 19th. Front shows Oshawott and back shows the Oshawott evolution. Glue coin halves together after printing. Paint if desired.…
Coin designed for Pokemon Go community day. Coin reflects selected Pokemon for community day June 6th. Front shows Gible and back shows the Gible evolution. Glue coin halves together after printing. Paint if desired. Additional file added…
Coin made up to give away at local meet up. Coin reflects selected Pokemon for community day July 8th 2018. Front shows squirtle squad leader and back shows squirtle evolution. Glue coin halves together after printing. Paint if desired.…
Coin designed for Pokemon Go community day. Coin reflects selected Pokemon for community day November 5th 2023. Front shows Wooper/Paldean Wooper and back shows the Wooper/Paldean Wooper evolution. Glue coin halves together after…
Coin designed for Pokemon Go community day. Coin reflects selected Pokemon for community day August 8th. Front shows Magikarp and back shows the Magikarp evolution. Glue coin halves together after printing. Paint if desired. Additional…
Coin designed for Pokemon Go community day classic. Coin reflects selected Pokemon for community day November 6th. Front shows Dratini and back shows the Dratini evolution. Glue coin halves together after printing. Paint if desired.…
Coin designed for Pokemon Go community day. Coin reflects selected Pokemon for community day March 8th 2025. Front shows Fuecoco and back shows the Fuecoco evolution. Glue coin halves together after printing. Paint if desired. Additional…
A requested foregrip design from our community poll. Hardware: 2x m4 30mm bolts (Pan head or button head are best) 2x m4 nuts Thank you, all who responded to our poll. We will be creating more soon. If you would like to participate in the…
Coin made up to give away at local meet up. Coin reflects selected Pokemon for community day January 19th 2020. Front shows Piplup and back shows the Piplup evolution. Glue coin halves together after printing. Paint if desired. Category:…
Coin designed for Pokemon Go community day. Coin reflects selected Pokemon for community day March 16th 2024. Front shows Litten and back shows the Litten evolution. Glue coin halves together after printing. Paint if desired. There are 2…
Coin designed for Pokemon Go community day Classic. Coin reflects selected Pokemon for community day March 22nd 2025. Front shows Totodile and back shows the Totodile evolution. Glue coin halves together after printing. Paint if desired.…
Coin designed for Pokemon Go community day. Coin reflects selected Pokemon for community day February 4th 2024. Front shows Chansey and back shows the Chansey evolution. Glue coin halves together after printing. Paint if desired.…
This remix adds a plate to the left of the hotend on a Recreator3d MK6 Fun Size, replacing the mini spooler. This plate is designed to be used with the V3 Community Bottle Cutter and has the appropriate matching M3 mounting holes, as well…
Coin made up to give away at local meet up. Coin reflects selected Pokemon for community day August 11th&12th 2018. Front shows Eevee and back shows all Eevee evolutions. Glue coin halves together after printing. Paint if desired. I also…
I like to pull my bottles into strips separately from my Recreator 3D. Since the original base was optimized to be used on the Recreator 3D frame I modified it to be better in a stand alone format. You can print the feet in a flexible…
Coin designed for Pokemon Go community day. Coin reflects selected Pokemon for community day July 19th. Front shows Gastly and back shows the Gastly evolution. Glue coin halves together after printing. Paint if desired. Additional file…
