Counting matching models…
Print with ABS or PETG with brim and support (only touching print bed). You need to rotate the model so that the single entry is at the bottom. After printing, remove the support by pushing filament through one of the opposite entries.…
Set of round bar connectors for rods with diameters between 5mm - 40mm Features: Press-fit of the round bars Countersunk screw locking holes Holes for tensile force absorption Customizer:…
A weather tight (not waterproof or dust tight) box for extension cord ends. Has basic locking tabs to keep the cover attached. Fits a medium duty US extension coord but can be scaled up if it needs to fit a larger plug. Due to its outside…
Hello! I designed this small ant nest with the ability to use it either standing up or laying down in mind. There are 2 entrances that use a screw-in system to easily connect to other things. It uses 3mm bolts at 20mm long. Or 19mm if not…
Wago 221-420 (10 Connections) DIN Rail mount. Prints without support
Print with ABS or PETG with brim and no support (only touching print bed). You need to rotate the model so that the single entry is at the bottom. Don't use too much force when screwing in the PC4-M6's. Fully push the bowden tubes through…
Printer brand: Creality Printer: Ender 3 V3 SE Rafts: No Supports: Yes Resolution: 0.4mm nozzle, 0.1mm layer height Infill: 10%
The source marked this model as adult content.
Variations (id 8-16mm) in S M L
Did you know 27 million business cards are printed every day - and 88% of those are thrown out within a week? That's 8 BILLION cards thrown out annually, or about 8,000,000 kg of waste. Business cards are still an essential part of…
These are just some pretty basic fittings for 2020 profile aluminum extrusions. They all use M5 hardware (10mm length) and are a decent alternative to buying premade ones. When installing, use the “guide rails” to align the (loose in the…
Those are the the well known “3D Printed Connections” If you're curious how strong any of the 3D printed connections really are, test it out and you were able to get some pretty telling results. Maybe you guys have already seen the Video…
To connect a hose; first heat up some water in a small mug and place the end of the tube you want to connect in the mug (this is to soften the hose to make it easier to slip on.) Apply some petrolium jelly (vaseline) to the connector then…
Part one of my single spool drybox prints. Designed to work around these large dry food storage containers: https://www.amazon.com/gp/product/B08TWH2QHV/ Replaces the original cap (which is easy to remove) with a blank that holds a…
Fits standard 25mm round NFC tag stickers. The logo indent in the top, and the gap in the middle are both 0.2mm, so I would recommend that layer height for easy slicing. A set for wifi, a set for bluetooth, and some blank ones: Pause your…
The PTFE tube that goes in the extruder keep coming out, so I made a modification from the Mini Extruder already modified by Deeps. I know It gets a bit in the way of the tension bolt, but who uses that anyway… Hope it works for you if…
Cyclone with Festool hoover hose connections.
Walked into Aldi and came out with this very strange power tool battery that can power both 20V and 40V tools. So I obviously made a mount, and added connecting holes for the two positive and negative outputs with the plan to make an…
Made to fit my Makita DJV182 jig saw, which has a 23mm ID connection to attach it to a shop vac. The 23mm OD side of the connector tapers to one side of the connector to allow clearance between the Camlock Connector and your worksurface.…
This is my solution to controlling the lighting and fans in my enclosure. My parts: 4-channel 12V USB Control Switch Relay Module 10pc 2.0 USB-A breakout boards (only need 4, though) Adjustable power supply converter 12volt power supply…
Dust protection caps for some of the common connections on SCUBA diving equipment and hoses: LP inflator stud (like the one on most BCD low pressure inflators); second state thread (like the one on second stage regulators); second stage…
This shelf support is designed for shelves that are at least 25cm deep. The end connection part has to be printed two times. Holes for screws to attach the support to the wall and the shelf are incuded. The connecting parts are designed…
I loved this model, but I found the latch too weak (and I didn't wanna fully commit to magnets), so I combined the Latch & Magnet models into one. I also added a subtle logo (a 4 pointed star) on the inside cover, it's from my homebrew…
Hello everyone! This is a Bionicle style head piece with Lego compatible stud connections where the eye stalks normally go. A good while back I commissioned a Mata style head CAD model from KingSidorak so that I could play around with it,…
Adapter housing with power connections and LED lamp for a 12V/7A battery. The housing fits an NP7-12 battery, which is available in various sizes from different manufacturers. Great if you need a 12-volt power supply quickly. I attached…
Structural Connections of IPE 360 to HEB 200. Screws M20. Model scale 1:1, recommended to print 1:5.
I wanted a ikea lack enclosure that had filament fed into it via ptfe tubes coming out of dryboxes. I really like a lot of things about the original prusa lack enclosure but wanted a few changes. For example, my printer is on a muscle…
This allows you to easily draw power from the Prusa printer via dis-connectable connections. My use case is that I have a vented enclosure and I drive the fan off the prusa power supply, this also allows a light strip to also be added the…
These may not be much use to anyone else. But I designed a top and bottom connection for holding a pole in my shower so that I could print a quick release mechanism as well and have an adjustable height shower head. I've included the top…
These two credit card-sized gauges can measure all kinds of tubing and plumbing connectors. One card will quickly help you find the size of any tube, like black tube, copper tubing, multilayer tubing, etc. The other gauge will help you…
You can no longer buy the mast foot for legacy BIC wind surfers, Using the excisting locking mechnism fixes that. Remove the slider, take off the end stops, remove the old locking mechanism. Install the spring from the old slider and put…
Just snap the conections together for a flexible barrier.
Rather than just having loose wires for the AV amp to connect the speakers, I created this faceplate for a standard UK electrical fitting box so I could create some patch cables to allow the amp to be quickly connected and disconnected…
I had the need to create a few more connectors for my wire organizer and decided to also make half and quarter variants since I was not a fan of the protrusion past the organizer with a single-size connector. Gcode File Settings: Layer…
Mount for Teppco 18V powertool battery with electrical connectors to +ve and -ve terminals. Designed with mounting holes Have included two 6mm holes which tight fit for spade electrical connectors with 6mm sheath. Its a tight fit so they…
This is a "prototype" to test how big & heavy I could make the top portion with the blades. The pins are pretty thick and should be printed flat on the bed for more strength. perfect for a fun project or cosplay. if you wish to increase…
Going to RMRRF, MRRF, 3D Printopia (fka ERRF), or SMRRF? Pack your Layer Connections tile by 3D Print Bunny to participate in the community artwork project! - The 3MF file I used for printing mine with Polymaker Starlight Neptune PLA…
Just a little somethin' I made on TinkerCad.
I needed 2 low benches. I had a few old kitchen cabinet doors, old curtain rod (27mm-bit more than 1 inch diameter) and some textile scraps. And voila a bench design. I designed the bench to be 250 mm high and the legs to be angled and…
ESR Meter case with Switch Button and 3 lateral connections. Material needed: https://s.click.aliexpress.com/e/_oDXqTVe - 4mm Banana Panel Socket Test Probe (Remove plastics) https://s.click.aliexpress.com/e/_oFWe2t2 - Mini Boat Rocker…
This is a feed cap designed for the Modular NFT Hydroponic Gutter Base . It closes one end of a module and adds two 7 mm hose connections to supply nutrient solution into the system. It’s part of my modular “raingutter” NFT hydroponics…
A case for the iPhone 13 mini which you can attach to any Lego Technic build with the Technic liftarms attached to both of the ends on the case. Quite easy and fast to print. Printing: Infill: 100%, does not really matter because the…
🔍 Design Highlights Precision-modeled in Fusion 360 for a clean, professional fit and finish Optimized for PETG filament — heat-resistant, strong, and built for workshop use Integrated tubing connection points for secure fitment to…
Just some ventilation parts i needed
I wanted to be able to disconnect the control box of my Wanhao Duplicator i3 v2.1 from the printer, largely because this makes it much easier to mount the printer inside an enclosure (to let ABS print in a warm environment) while the…
These are meant to mount on the pool itself where pump is attached on 2 places for water flow. The stress is relieved since of the pool body itself due to this design and also they are watertight, so they shouldn't leak if printed in PETG.
This is a generalization of my Phone Stand with power plug. This stand allows the user to plug both USB and Audio cables into the bottom of the phone. Unlike my first phone stand, the USB connector is not secured to the stand. This makes…
Mein neuer Computer hat das Gehäuse (Case) Wildrabbit Aero. Die Anschlüsse (USB, Audio, ...) befinden sich auf der Oberseite, wodurch sich mit der Zeit Staub in den Anschlüssen ansammelt. Diese Abdeckung wird in den USB-Port gesteckt und…
Arm with 2 connectors on each end
A simple box, 13 x 7 cm with a lid and two 4 mm wide holes to allow cables enter and exit. Main motivation behind the design was to prevent my cats to play with my LED controller cables.
I decided I wanted a better looking filament rack. These are designed to be used with 1/2" copper tubing but, you can use wooden dowels or whatever you want! Printed on Bambu Lab X1C with PLA.
Hello everyone! This is a modified Bionicle Metru style head piece with Lego compatible stud connections for eyes. I had a ton of fun making my Bionicle Compatible Head with Stud Connections , so I thought it would be fun to modify a…
Part of my series of making a 3d printable terrarium, this is a modified version of the corner piece I shared earlier with the connectors I made a few days ago. This is to be used along with some connecting straight pieces I am currently…
I broke 3 screw mounts thinggies... so I made them 4 mm wider and the counteparts too Category: DIY
Students will prepare joints for the purpose of teaching students in the subject of Technical Drawing. Studenti připraví spoje pro výuku žáků při přeměřování a rozkreslovní objektů Odborné kreslení.
This is a small wafer or disc to help glue across joints to provide more structure to multi-piece projects. The original use case was for a multi-part helmet that had no notches or grooves for alignment or connecting the pieces together.…
Wago 221-420 (10 Connections) DIN Rail mount. Prints without support
I decided I wanted a better looking filament rack. These are designed to be used with 1/2" copper tubing but, you can use wooden dowels or whatever you want! Printed on Bambu Lab X1C with PLA.
A simple box, 13 x 7 cm with a lid and two 4 mm wide holes to allow cables enter and exit. Main motivation behind the design was to prevent my cats to play with my LED controller cables.
The PTFE tube that goes in the extruder keep coming out, so I made a modification from the Mini Extruder already modified by Deeps. I know It gets a bit in the way of the tension bolt, but who uses that anyway… Hope it works for you if…
