Counting matching models…
This model was made when I went to install a camera into Octoprint. I broke the CSI/DSI clip trying to loosen it to insert the cable. Apparently I'm the only one who manhandles these (unfortunately now) really expensive devices- and I…
Update 2023/12/01: Added a step file with the two portions of the coupon separated out as well as a DXF of the sketch to aid with customization. You've spent more hours than you care to think about routing endless items into the Awesome…
The PiSCSI Slim Case protects your Raspberry Pi 4 and PiSCSI (formerly known as RaSCSI), streamlining your vintage computer setup, and looking completely at-home next to your "Snow White" Apple Macintosh computers (like the Macintosh…
The PiSCSI (formerly known as the RaSCSI) is an exciting project by the retro Mac community, which turns a Raspberry Pi into a virtual SCSI device. It can host virtual hard drives and CD-ROM drives, which can all be attached and detached…
This is a replacement part for the Raspberry Pi Zero CSI connector. I printed this with a 0.4 mm nozzle at 0.1 mm layer height with PLA. I printed ten at a time to allow for cooling between layers.
A bracket to mount a SCSI2SD adapter (version 5 and newer) into the expansion card slot of a Macintosh SE or SE/30. Allows for much easier access to both the SD card slot and micro-USB port. Version 1.2 of this bracket features tweaks to…
I suggest printing all of them in 0.1mm resolution and see which fits best. NOT for Raspberry Pi Zero.
Some users on Reddit requested a FICSIT logo keychain, so i made one in Fusion 360 by tracing over a picture. The layers are made to match a 0.2mm layer height, or a number you can divide it by (0.1mm, 0.05mm) Print instructions Category:…
This bracket mounts your BlueSCSI 1.1a in your vintage Macintosh hard drive bay. It uses the original hard drive mounting screws, and has a small tray to aide in removing and installing the microSD card. Compatibility This bracket should…
This 3D printed bracket is designed to mount a BlueSCSI in the 3.5" hard drive bay in vintage Macintosh computers. The BlueSCSI slides into the hold-downs near the SCSI connector, firmly snaps into place on the back, and is optionally…
This bracket mounts your BlueSCSI 1.1a inside your Macintosh SE or SE/30. The microSD card remains accessible from the outside of the machine, and a light pipe helps you see what the status of the BlueSCSI is. Indicators on the bracket…
Simple, sturdy case for an external BlueSCSI DB25 v1.1. Requires two m3x10mm socket cap screws, but 8-11mm long should work as well. Exposes the SD card slot but hides all the other things. They’re inside if you need them! Print with the…
Desktop BlueSCSI V2 mount with a single screw. For board revision 2023.10a and newer ONLY. Design by Alan Williams.
Here's a mounting bracket for your vintage Mac SE or SE/30 to install a BlueSCSI v2 in the expansion port on the back. This makes for easy access to the SD card slot, just remove the slot cover from the rear housing. I especially like…
Please click ❤LIKE❤ if you appreciate my work 😊 The Bavarian V12 masterpiece – now on your wall. This 3D printable model of the iconic BMW 850 CSi (E31) offers a sleek, minimalist tribute to one of the most elegant and powerful grand…
This 3D printed bracket is designed to mount a SCSI2SD to the 3.5" hard drive bay on vintage Macintosh computers. It works with both SCSI2SD v5.1 and v6 models, and has been tested with the Macintosh SE, SE/30, Classic II, LCII, and…
Macintosh Compatibility: Fits the Macintosh DB-25 SCSI external bus. Designed to fit IIci, IIcx, Quadra 700, and PowerPC 6100. Assembly notes Pause the print to add the SCSI insert (printed beforehand) so it sits flush with the case and…
A funcsigned Bottle Cutter made in TinkerCad that makes 8 mm strips from PET bottles. If you like it or even make one please post it, like, share, and consider a Paypal donation . Thank you! BOM 3 pcs. washers 14-14.5 x 1 mm 1 pcs.…
I personally have it at 101 mm/4 in long axis, 51.5 mm/2 ish in wide and 3.6 mm/.14 in tall
The PiSCSI is an exciting project by the retro Mac community, which turns a Raspberry Pi into a virtual SCSI device. It can host virtual hard drives and CD-ROM drives, which can all be attached and detached through a web interface hosted…
The model is designed to give a better look to a classic OctoPrint setup (RPi Zero + CSI Camera). The model provides: enough space to organize all the cables inside angled air vents for better heat dissipation embedded spacers to lift the…
A frame to mount the ZuluSCSI Compact RP2040 (Homebrew kit) in a 3.5" floppy drive (fdd) bay. I'm not sure, what kind of fdd bay it is, I think it's IBM/PC. Please measure to hole distances for the screws to verify before printing: the…
@DocWeebl made a fantastic Camera Module 3 case for the Raspberry Pi Camera Mount but I needed it taller to handle the stacked Camera Module 3 Wide + the Arducam CSI-to-HDMI board in the stacked form factor. I'm a newbie to this editing…
This is the model for the “Apple” inspired case for the external BlueSCSI v2. The enclosure was designed to lock together with the use of 5x2mm magnets. I used these: https://a.co/d/1b7HHj1 - make sure you get the polarities right when…
We weren't satisfied with the prior SCSI2SD v6 bracket that had been floating around, so we made a new one for ZuluSCSI and SCSI2SD. Our new bracket: Can be used screwlessly. Slide your device into the channel in the front face, then…
Just a quick PiKVM case for a Pi Zero 2 W with an HDMI/CSI-2 adapter . I also needed ventilation for the heatsink I used, which I mounted with the fins facing out towards the long grill on the bottom. Props to and thanks for YAPP_Box ,…
Summary I've got a small networking rack, where my router and switch are located. I've also got an NBN HFC modem, (a DOCSIS cable modem), this is produced by Arris for NBN Australia, but their enclosure is used across many different…
This 2-part case is designed for the Waveshare HDMI to CSI adapter card. This card is used to convert the video signal from an HDMI device to the CSI connector on a Raspberry Pi. It can be used to interface HDMI webcams (like a GoPro) to…
A small case for Raspberry Pi Zero 2 designed for PiKVM (DIY version with rpi zero 2) You need : 1x Raspberry Pi Zero 2 ( link ) 1x HDMI to csi ( link ) 2x hexagonal spacer M2.5 x 12mm ( link ) 4x screw M2.5 Parts to print (~ 1.5h with my…
I've remixed this tray so it fits in the back of your Macintosh SE/30 if that's unused. This way you can access the SD card easily without having to open the case. The fit is very snug, and you can screw the board in place with a single…
The model does not require any supports.
This is a case for an HDMI-CSI module sold on Amazon for use with the RaspberryPi4. Requires 4x M2.5 screws to hold in place. All parts printed with minimal supports on plate at 0.20mm resolution and 15% infill.
This retro-cyberpunk inspired Raspberry Pi 4 case was specifically designed as a case for a MotionEyeOS camera installation. It supports a Raspberry Pi 4, one end of the Arducam CSI to HDMI Cable Extension Module . and a 0.91in 128x32…
Orange Pi Lite Slim Case Standard Remix By Pawpawpaw85: https://www.thingiverse.com/thing:2778278 Only CSI Camera slot cut out. Print Settings Supports: Yes Resolution: 200µ Infill: 30% Filament: Sunlu PLA+ Orange
I recently got a Macintosh LC II that didn't come with a hard drive, so it didn't have the bracket either. Instead of paying ebay prices I decided to build my own, but also give it holes to screw in a RaSCSI/PiSCSI or a BlueSCSI. I've…
I recently got a Macintosh Quadra 610 and nearly all of the internal plastic (and some of the external plastic) was shattered, just a byproduct of the era. I like adding SD-card hard drive replacements to my machines and since the drive…
Inspired by the awesome model by Joel Crane (PotatoFi) and the default BlueSCSI bracket, this allows you to mount your BlueSCSI v2 “Initiator” unit to the rear expansion port of your SE or SE/30. Just supply two M3 screws and you're done.
If you are missing the metal hard drive bracket for your Macintosh LC-series computer, this bracket mounts your BlueSCSI 1.1a in your vintage Macintosh LC-series computer's hard drive bay. If you have the stock metal bracket, then my…
Why This Exists If you're here, you've probably tried the official case and were disappointed. The original design is too flimsy,it falls apart in your hand. So I set aside a day and designed a better one. MK1 Features Thicker walls and…
The model BlueSCSI_HP_3x2_FDD_mount_v2 v1 to be used instead of FDD inside HP 362 or 382. BlueSCSI_FDD_mount_v1 v1 is in the shape of FDD drive and is intended to be used in any computer. Can be printed without supports with front face…
This is the stock case included in the BlueSCSI repo created by Androda and uploaded here with permission. BlueSCSI 50 pin Desktop models 2022.12a-2023.09a, 2023.10a Select the file that matches the model printed on your PCB.
Arducam CSI-to-HDMI Adapter mount. I used VHB tape to stick in the electronics bay of my Voron V0 Used hardware: 4x M2x5mm self tapping screws
I installed this in an SE which has one floppy drive and a dead hard drive. It just barely fits using the original SCSI cable, and with the hard drive bracket still in place. If you have more room available, you could use one like TDNC's…
I really like the design from evancli for RPi4 with HDMI CSI Card. I make the slot bigger to fit CSI to HDMI bridge card for Pi-KVM. I also remove the top OLED mount because it will not fit with the larger C779 module. Update 4/6/2021:…
This is a case for the Raspberry Pi HQ Camera, and it includes a place to mount the Arducam CSI to HDMI Cable Extension Module . This model uses heat set inserts , and metric hex screws , for mounting the camera, hdmi module, and closing…
Introduction I've been printing a bunch of ESRack things for my work and home racks and I've always wanted to rackmount these annoying cable boxes. Unfortunately they have a case that's almost exactly 1U high, so the standard ESRack…
2 piece case for BlueSCSI V2 external DB25 without the screw hole in the PCB. The slots and notches on the case are an homage to the Frog's Snow White designs language as seen on 80s Macintosh products. SCSI logo is recessed by 0.001mm to…
The Macintosh Color Classic uses a slide-in hard drive design, where the drive mounts to a latching bracket. But since BlueSCSI PCBs don't have standard hard drive mounting holes, you can't easily use an original drive bracket. This one…
Remixed the model of Nashuar, thanks for the base-design. What I added/changed: mounting for the power/USB-splitter on the lid cutouts for the USB-ports of the splitter in the case cutout for a 0.91 inch (128x32) OLED display in the case…
PIKVM case supporting the Raspberry Pi4, USB-c power/hid splitter, RJ45 ATX connector, and a 0.96" OLED display
minimalist wallet resembling a ficsit coupon, requires two elastic hair ties
I have a PCI SCSI card I need to install in one of my computers to read out the contents of a hard drive previously used with an Apple IIGS, but the motherboard I installed earlier this year has no PCI slots. I bought this…
This is a replica of the screw box from Satisfactory. It provides a satisfactory (get it?) way to store whatever you may need in a way that shows the kind of pragmatism that FICSIT stands for. Supports needed. infill at least 5%. Filament…
Music tape from Satisfactory. The cog wheel/gear might be a bit too small, need to fix this in future versions... 😅
The FICSIT Personal Safety Tool is here! Please check out the trailer for the FICSIT Personal Safety Tool, it outlines the final product beautifully and demonstrates all its features Cheers to Swae'J Studios for putting the video…
Inspired by xiphmont's implementation, I created my own files for the enclosure and pi3a+ frame for this update. Please follow xiphmont's guide to install the pi3a+ and perform the upgrade. The installation was flawless for me with the…
A simple remix from this nice fitting case to make it fit the larger green version of the HDMI to CSI board. You need to print the bottom half from this model .
The files include the following: Ficsite Trigon Full - one piece print this 3 times to make the complete Ficsite Trigon Ficsite Trigon Full - zero tolerance the same as above but divided into 3 parts. For multicolor prints. Ficsite Trigon…
Many Macintosh II, IIx and IIfx models shipped with hard drive trays designed for 5-¼" drives, even if they shipped with a standard 3-½" drive. This is a bracket that lets you mount a BlueSCSI version 2 directly to the tray, without…
Scale the original coupon to your desired X and Y dimensions, the scale the Z to 1.8mm to fit this stand.
This is the printed mounting bracket for using a BlueSCSI V2 in the Macintosh Portable. It is compatible with BlueSCSI 50 pin Desktop models 2022.12a-2023.10a. The picture shows an earlier version of the bracket and an older revision…
I purchased a BlueSCSI v2 SD to SCSI emulation board for my Macintosh SE/30. I wanted to mount the card so that it would mount into the Expansion Slot. You can find out more about the fantastic BlueSCSI v2 SCSI emulator here . Thanks for…
This is a small box to take up the Adafruit CSI or DSI Cable Extender Thingy for Raspberry Pi. (https://www.adafruit.com/product/3671). The bottom part can be fixed somewhere using a cable tie. I use it on my MK3S to connect camera cables…
This is a remix of "RPI Cam + Arducam CSI-HDMI" by nperto on Thingiverse that rotates the attachment 90° and attaches to the opposite side. Designed to work with the arm/pivot from…
Quick and dirty mount to allow you front panel access to your SD Card for the BlueSCSI v2 “Initiator” on the Macintosh SE. Use one of the main brackets (with or without “Authentic LED Hole”) to mount the BlueSCSI, then use the required…
A drive bracket with universal mounting holes for any BlueSCSI v2 model.
This is a modified z-belt cover that has a slot for a CSI ribbon cable. This allows you to easily mount a pi camera and cleanly route the wiring into the electronics compartment.
I like to use my raspicam for my 3D printer, but the CSI cable is not so handy. So I bought these CSI to HDMI adapter (amazon link), to use regular flexible HDMI cables. Finally I've made a cover mod for Sneaks incredible highly…
I purchased an Arducam CSI to HDMI Cable Extension Module online and needed a way to mount it to my pi camera case. Designed this small piece that glued to the back of the camera case and then provided a place to screw the module to. Not…
This is the stock case included in the BlueSCSI repo created by Androda and uploaded here with permission. BlueSCSI models 2022.11b, 2023.10a. Select the file that matches the model printed on your PCB.
This mount is designed to fit the BlueSCSI v2 "desktop" model and fit within Macintosh SE, SE FDHD, and SE/30 computers. I used #4 machine screws and nuts to attach the board to the mount and the mount inside of the computer. BlueSCSI…
This is a BlueSCSI v2 SCSI emulator mounting bracket for use with Vintage PCs. It mounts like an ISA expansion card, providing external access to the SD card slot. It will also work in PCI slots, though be mindful that PCI cards are…
An enclosure designed for HDMI to CSI-2 Module(based on TC358743XBG) that designed for Raspberry Pi. You can easily find similar module on the eBay (such as this one). To assemble this case, you will need the following non-printable…
just like in the original, to get the honeycomb pattern I've adjusted my slicer settings to: wall loops: 5 top shell layers: 0 bottom shell layers: 0 sparse infill density: 25% sparse infill pattern: honeycomb feel free to stack and…
This allows you to mount two CSI/DSI to HDMI adapters on your DIN rail, preferably next to your Raspberry Pi. As this is a passive adapter without any electronics involved which just routes the wires onto a HDMI plug, it will work for…
the PowerBook 180 case interior is intriguingly minimalism. There is very little actual structure; some components are held in place simply by being stuffed into the case itself. The hard drive has no sled, or even screws—only two tiny…
I adjusted the mounting holes for the newer version of the BlueSCSI v2 (2023.10a). I also created a single piece model for people wanting to print using resin and not needing the two part version for improved FDM printing. My plan is to…
An enclosure for the ACSI2STM Compact by SidecarTridge (REV1.0.0). This version is a physical and electronic redesign of the original ACSI2STM, with two important improvements: the connector is an authentic DB-20, and the size of the…
This is a SCSI drive bracket for the Macintosh SE or SE/30. This is very similar to the original design except the bracket is shorter so that it won't get in the way as you plug/unplug cables from the motherboard. It should fit spinning…
This is the stock case included in the BlueSCSI repo created by Androda and uploaded here with permission. BlueSCSI model 2023.03a
FCSII Tab Infill Kit: This kit allows you to adapt your standard FCSI (dual tab) fins to fit FCSII boxes. It includes 4 different wedges (0, 3, 5, and 9 degrees) to match various FCSII boxes. Simply look inside your FCSII plug to…
This is a replacement expansion slot cover for the back of the large pizzabox macs of the late 68k era and early PowerPC era. The Centris/Quadra 610 and the Power Macintosh 6100 among others. Included are several versions with various…
Simple mounting Solution for your CSI or DSI to HDMI Adapter. If you didn't know: you can use these adapters to route the DSI signal (for a Touch Display like BTT PI TFT 50 or Waveshare 5" DSI) trough the HDMI cable, which is a lot more…
Note: Despite many similarities to another model on Printables, this is NOT a remix. It's a clean sheet design. BlueSCSI is an Open Source project: https://github.com/erichelgeson/BlueSCSI This Mount is designed to use M3 Heatset inserts…
This is a minimal SCSI drive bracket for a Macintosh SE or SE/30. It mounts onto the top of the floppy drive casing using the same screws as the stock bracket. This bracket is shorter than the stock bracket so that it's easier to…
I ordered the wrong clutch and didn't want to wait for the next one, so I tried to print and it works fine.
This is a bracket for mounting a PiSCSI / RaSCSI inside of a Macintosh IIci, IIcx, or Quadra 700 hard drive bay. This works for any full size Raspberry Pi with a RaSCSI on it. The SolidWorks file is included if you want to mess with it.…
The Sun “lunchbox” SPARCstation systems – like the IPC and IPX – have a neat drop-in setup for their SCSI hard drives. But this relies on the drive's mounting screws being in specific places that not all have. This bracket lets you mount…
Flexible paddleboard fin
Basic sleeve for 35mmx50mm hdmi-csi bridge Might need a bit of force to pass the hdmi plug through Feel free to update & remix this :)
Tiszás kulcstartó és bevásárlókocsi érme.
This mounting bracket is specifically designed to fit the VMIVME-7452 Floppy/Hard Drive Interface VME bus card. If you need this bracket, you know what it is. However, I have also included the .step file, which includes a simple model of…
This is a remix of GutBomb's "BlueSCSI v2 5.25" PC Drive Bay Mounting Bracket" to work with the original PowerMac 6100 CD (tray or caddy) front panel. I used OpenSCAD to move the mounting of the BlueSCSI up by 7 mm so it fits inside the…
This Raspberry Pi 4 case was made for a PIKVM instance. It supports a Raspberry Pi 4, one end of the Waveshare CSI to HDMI Cable Extension Module . and a 0.96in 128x64 OLED display . A complete list of materials are 1x Raspberry Pi 4 1x…
Guinness Aranykocsi Érme Ajánlott beállítás: 0.2mm rétegmagasság 3réteg tutaj magasság autómatikusan fa genetált támasz
The longest word in English. It could help you remember how to spell pneumonoultramicroscopicsilicovolcanoconiosis. Pneumonoultramicroscopicsilicovolcanoconiosis is a lung disease caused by breathing volcanic ash.…
This was a quick request by somebody who wanted https://www.printables.com/model/103898-connector-box-for-rpi-csi-cables to match the hexagon pattern RasperryPi - Camera Module 3 case pattern of my remix:…
The CSI camera for a Raspberry PI will slot into the camera mount which then sits tilted forward 15cm above the surface. It is intended for a camera connected by the CSI ribbon cable to a rPI Zero on a MK3 Prusa. The CSI cable exits from…
