99 models
This is a slim compact case for a SSD1306 I2C 0.96" OLED Display Screen. The case was designed based on the measurements of this model I ordered from AliExpress. Other boards do vary slightly, and the model's clearances are very tight. A…
Display housing for SSD1306/SSH1106 1.3" OLED display and Wemos D1 Mini. There are many use cases like Octoprint Display, Tasmota or ESP Easy to name just a few - you may need to follow the respective guides and instructions online. I use…
I changed the Original Parts to fix some “issues” and create a new housing for my Octoprint Monitor ;) Changes: -rounded the houding edges for a smoother look -create a bezel for a 0.96" OLED -make the bezel rotatable for “Tate Mode”…
Made a project box for the ESP32 WROOM (although most ESP32 boards have the same form factor), with a lid for the 0.96" OLED screen. It houses multiple access points for wiring, and a small 10mm slot for the touch sensors. I use a folded…
This design is based on spacing points as equally as possible on a sphere (using charge-like relaxation optimization) and then cutting planar slices perpendicular to those directions. This make fairest as possible dice for any number…
Simple design of the famous SSD1306 0,96" OLED display for your assemblies.
case for the SSD1306 OLED display. after inserting the display, heat and press the 4 pins to lock it, or glue it use supports only from the print bed for the screw holes post a make!
Just a little protection of LCD display. The display is just clipsed on the box Category: DIY
Got my inspiration for this from this reddit post A simple box for and SDD1306 OLED display, hooked up to an Arduino nano, with one WS2812 color LED (neoPixel). The cover on the back simply slides in, no screws or glue needed! The code…
This is a 3D reference model of a 128×64 SSD1306 OLED display module, designed to assist with accurate placement and fitting in larger assemblies. The model captures the overall dimensions, mounting holes and pin header position commonly…
SSD1306 OLED Display Reference Model (0.91") A simplified, accurate 3D reference model of the popular SSD1306 0.91 inch OLED display. Perfect for CAD work and designing custom enclosures without having to measure the actual component! How…
A upgraded OLED case for CurrentRanger: finished front face and covers the OLED module making it more resilient in the parts box. No screws needed! This is a two-part print: uses a snap-in clip instead. This is designed for the SSD1306…
This is a case I designed for my TFT IIC LCD Displays. It snaps together and can be plugged directly into a breadboard. Added a deep box that I used M-F jumpers to extend the pins out of the box Print Settings Printer Brand: Prusa…
I wanted a way to reliably and simply mount an SSD1306 OLED board of the standard dimensions to my hobby enclosure, and this fulfills that need. Keeps the OLED display square and tight to the edges and doesn't wiggle around. Top Hat: for…
I designed this slim case years ago to hold and protect a tiny oled screen that I added to an old fan along with a wifi module to remote control the fan ( https://github.com/reivaxy/iotFan ) The original scad file was actually two files,…
This is a housing for: Wemos D1 Mini / ESP8266 ESP-12 0,96" OLED Display I2C SSD1306 CO2: Senseair S8 as well as MH-Z19 is fitting I've soldered a BMP280 and a SHT21 for temperature and humidity together Used DuPont cables Many…
face plate redesigned to fit 0.96" OLED like the following: https://grabcad.com/library/ssd1306-oled-display-128x64-1
Octoprint monitor weather station esp8266 D1 mini bme280 case What a mouthful. It shows the diversity for which this can be used for. Usecases: Octoprint monitor Weather station InfluxDB querry NTP clock Desktop widget Whats needed: Wemos…
I had a SSD1306 0,96" OLED display which I wanted to use with my Open DTU. This Open DTU case was a perfect fit for my requirements but unfortunately it didn't include a cutout for the display. As the SSD1306 fits perfectly in the lid I…
This is a remix of the excellent Yoradio case design. My version is 12mm shorter and slightly easier to build. BOM: ESP32 Wroom with 38 pins and a wired WiFi antenna SSD1322 display ESP32 expansion board rotary encoder PCM5102 DAC…
Timer to help your kids brush their teeth properly. 2 minutes in total. Shows which part of the mouth to focus on and displays a smiley face when finished. Hardware required Arduino Nano (or its clone, works both on ATmega168 and…
Printed with Prusament PETG Jet Black 0.2mm no rafts or supports required. This is a remix of the version found on Thingiverse: https://www.thingiverse.com/thing:2884823 I added 2 Led's (ws2812b) a passive buzzer and a button on the top.…
basically just the og stand for the 13 but all the stuff are together
Air quality sensor SEN5x MH-Z19 SSD1327 Hello; I would like to present my take on air quality sensor made out of: ESP32 board SEN55 - PM/NOx/VOC sensor MH-Z19 - CO2 sensor SSD1327 - display Chassis will require : Filaments Geetech marble…
raspberrypi5 compact case with 2mm thickeness + x1001(nvme adapter) + ssd1306 case + official active cooler m2.5 flat nuts(x6) and 16.5mm standoffs(x3), which containing in x1001 Jan 28th, 2024 - SSD1306 was moved through other side, and…
DCC Ex Case - Built using a ESP32 D1 R32, Deek Motor Shield and OLED 0.96 SSD1306.
This model is a compact front frame for a standard 0.96 inch OLED SSD1306 display module. The frame is designed so the module is inserted from the back and clicks into place. From the front, only the active screen area remains visible,…
This is my attempt at making a standardized system for mounting common modules to your projects. It is meant to be customized as you wish, I've just made the platform and some modules with the boards I had on hand, I hope this will get…
Went to install a Tapo D130 doorbell, realized I needed to extend it outward 1-5/16" to clear the brick. Missing the 2 small mount screws - did not need them. This is an edited to best guess upload - I widened the bracket gap a tad (I…
display case for the Mighty Morphin Power Rangers - Morpher by surfinbird132 https://cults3d.com/en/3d-model/game/mighty-morphin-power-rangers-morpher made to hold the morpher along with a extra coin This is a remix of: Frog Box v2.0…
A slim case for Raspberry Pi Zero with the SSD1306 0.96'' I2C display and a gpio button. Can be used for various projects (e.g. pwnagotchi, for educational purposes). The case has latches for a nice snap-fit, no hardware needed. It also…
Two box , one can carry Arduino/uno / leonardo or smaller board ( it's exatly a leonardo that i use in my icpmax) and the display. A smaller second to box display SSD1322 solo, so you remote where you prefer the screen (like upper ICP)…
Create a modern, low-key digital terminal with a Wemos D1 Mini and a SSD1315 0.96" OLED display. You can use your terminal to show the time, info about a currently play track, or anything else you want! I use ESPHome for this, but other…
SSD1306 0.96" OLED Display Mount Mount for the common SSD1306 0.96" OLED display. Designed for arcade sticks. Angles the display towards the player. Mounting material compatibility The mount was designed for 10 mm thick (0.3937 inch) or…
Screen: 0.96 inch OLED IIC Serial White Blue OLED Display Module 128X64 I2C SSD1306 12864 LCD Screen Board For Arduino For some reason its bit smaller compared to existing dongle cases, so had to create this one. Features: - Easy to…
This is a panel for mounting the SSD1309 displays and further integration to projects. It may be easily modified or integrated to other 3D projects.
Printed with Prusament PETG Jet Black 0.2mm no rafts or supports required.
Terminal for SSD1306 0,96" Node MCU and DHT22. Desk thermostat and hygrometer.
A minimal bezel for the 0.91" 128×32px SSD1306 I2C OLED display. When the display module is placed in the bezel, the actual display portion (where the pixels are) is nearly fully centered with a very small amount of dead space around it…
Holder for a SSD 1306 OLED display.
This is my second Pi Zero Case designed mainly to hold my Pi Zero W , but also works with the normal Pi Zero as well if you are using wifi dongles. Its designed to allow the Pi to just slide in and the power cord keeps it in place. As it…
I remixed the original model, having split it into 3 parts for easier printing and assembling. You will need 8 heat set inserts and 8 m3x8 screws. Heat set inserts are to be inserted into the middle part on both sides. I used Wemos D1…
Basically just block that elevates the screen on the PCB, which I needed for a project. This version uses m2 heat insets and m2 screws to attach. The other benefit is because it uses female headers, the screen can easily be swapped if it…
Mad Catz Tournament Edition Round 1/2 Display Panel for SSD1306 0.96" OLED Alternate option panel for the Mad Catz Tournament Edition Round 1/2 adapting my mount for SSD1306 0.96" OLED displays. A small part of the cable compartment will…
Guy Manuel helmet for Dummy 13's
This model is still in prototyping phase so stuff might not fit perfectly. You want a streamdeck but you are poor? This is perfect for you. Using this project you can add 4 keys and 1 knob to your keyboard. A very handy OLED screen is…
I noticed that the Gridfinity 1x1 bins are a perfect fit for the SSD1306 OLED screen, and as I really wanted to use these in my projects, I decided to create an extension to my gridfinity electronics workbench. This allows you to quickly…
Krytky závitu pro hasičské savice se závitem RD130 dle DIN405. Pro ochranu závitu před nečistotami které mohou komplikovat rychlé nasazení a šroubování na závodech. Oboje jsem tisknul z PETG s nastavením 0,2mm vrstva gyroid 30% výplň a…
Camera Junction Box for Hikvision DS-2CD1321 This is a junction box intended for the Hikvision DS-2CD1321 dome security camera. It provides a cable-management solution and a stable mounting platform for walls or ceilings. Also perfect…
Remix of FunnyGermanGuy's remix of Laurman's Rancilio Silvia Screen Mount over on Thingiverse. I added a bottom plate with an integrated magnet which is screwed on the top part because I didn't want to glue it on. Top part is mostly…
Bigger and more different for the Dummy13V1 figure frames and armor. Includes Waist13V2.
I build a “FFI BOX” to carry the SSD1306 1.3 " https://it.aliexpress.com/item/1005004993682117.html?spm=a2g0o.order_list.order_list_main.53.21ef3696w40tvo&gatewayAdapt=glo2ita PETG/PLA Material 4 x M2 Screws 4x M2 x 4 x 3.5 heat brass…
There isn't much to go here, everything is generally in the "differences of the remix" 2/2 small publications for Quality of Life changes. Print the parts as you would with a regular D13 Left Thinner thighs | Right are the larger Red is…
I wanted to replace 2 of my old DS-2CD2142 cameras with DS-2CD1383G2-LIU, but wanted to reuse the existing mounts. The new cameras are smaller than the old, so I created an adapter. The 3 holes for nuts in the top are a tight fit, which…
Rook MK1.1 Bricks Skirt with cutout for 0.96" SSD1306 OLED display
I made this for a MIDI controller I designed (featured in a couple of the pics). You won't be able to use this directly, as the bottom profile is hella wonky as to avoid specific components on my PCB. But should be pretty easy to adapt?…
Bolts on where the discharge cover went to help keep the mulch plug in place. Print standing up with 5 walls and 50% infill
my homelab server by orangepi 5plus orangepi 5 plus case contaning zigbee coordinater, NVME heating spreads, SSD1306 additionally you need, M2.5x8mm SHCS x 4pcs my SSD1306 has abnormal size 24.7x27mm, you may need correction. my zigbee…
I used the original models and modified them rather crudely. Using TinkerCAD - and some original design using OnShape.
i needed a way to mount a oled display to my pi 5 setup, i have the m.2 hat . it has a couple holes on both sides of the nvme so i decided to mount my display there with a couple stand offs. i may expand this to other displays and…
Its just a really small update for the chest frame and inner chest part, for a more stable connection, as I've found that it can sometimes be a little loose, which is conveniently also pretty annoying. Print as you would a normal D13. 1/2…
Wanted to add a SSD1306 to my ZMK dongle, most existing models are for n!n clones but I wanted to use a Xiao BLE board on this one. Englmaxi's repo has a basic shape, but doesn't have enough room for dupont wires, no easy access to Xiao's…
**Description Language:** DE, ENG, FR, CZ **Configurable:** YES **CAD Program: FreeCAD** # DE Basismodel für eine Befestigung eines SD1306 0,96 Zoll Display. Dieses Model dient dazu, es im Freecad in nachfolgenden Schritten für die…
Plant Stacks! - SSD1306 OLED Sign A remix of the OLED Display Bracket by @ebarnes_120516 to be used to bring your Plant Stacks! into the 21st century. Use a device like a pi or any microcontroller to display messages like watering…
i Propose balls (42) 1color 16x 2colors 14x 3color 12x or can you try 14x from every color i thing this puzzle will be hard Ball i connect with Glue, opening 3,3/2mm is for positioning meaning probably better print ball full with support…
A more simpler and improved version of the master sword for dummy13
I would suggest not printing this one yourself, as it isn't complete yet
A remixed backplate for double screen version of Terminal for SSD1306 1.3" OLED and Wemos D1 Mini . Wider holes should accomodate more variations of Wemos boards (mine were not central on the original design). It's as simple as that!
A 30 minutes 4g of filament print to fix your broken clasp of e-bike LCD computer. Fits Zundapp Z-810 / Ananda D13. Perhaps fits other e-bike LCDs - write in comments, if it is so. M4x10 conical head screw was used, and original 2x12 mm…
Printed in PETG on heavily modified ender3v2 using klipper.
Just a additional Bottom for "Big Red Button" with Wemos Mini D and SSD1306 OLED Display Top Part and Button can be taken from original part
SITE 3 is a long range strategic strike group of Europe against the Machine, but they disbanded in 2020, following the STALKR PROGRAM shut down. Hey! I'm Inkwell (Or 0blivious on YT (With a zero)), and I'm honestly pretty excited to…
XiaoWa PCB case model ( https://github.com/gargomoma/xiaoWa_pcb ). This model is made to actual dimensions and has no tolerances. Please enlarge it before printing to allow for material shrinkage. The model requires a 103450 battery and…
I used this 3 way corners to build my carnival costume. You need 8 corners to get a propper case with round 13mm wood rods. The rods can be fixed with a woodscrew. Additionaly for the costume you need: a grey shower curtain:…
That's a chassis for my project at TTGO T-call. It controls 2-relays module, show info LCD SSD1306, powered by 18650 bat
Die ist ein Gehäuse für ein D1 Mini ein SSD1306 Display und AM2302 Sensor. Die Anschlüsse des AM2302 Sensor sollte um 90 Grad gedreht werden. Gedruckt mit PLA oder PETG.
Since I couldn't find a ready-made enclosure for the OpenDTU Fusion board with a Fusion POE adapter and 2.4" OLED SSD1309 display installed, I built my own. I think it turned out quite nicely and is quite easy to assemble. Unfortunately,…
3D print to hold the SSD1306 tiny display for the Synthux Touch 2
qmtech mister fpga clone ssd1306 oled screen stand Category: Automotive
Remixed to also fit an OLED screen and my temp sensor. It's a bit janky as I didn't have the .step but it works.
As requested by a Reddit user. Work in progress!
Lock nut made with a Dummy 13 stand mount so your Dummy 13 can 'support' your GPU.
ESP8266 WLAN Room Climate Sensor Case (DHT22 + SSD1306 OLED) This is a modular 3D printed case for a small WiFi room climate sensor based on the ESP8266. The sensor measures temperature and humidity with a DHT22. It shows the values on a…
Don't scale or it will not work. Tell me if it doesn't work.
This was made for a school project upgrading the quadracyle to an electric gokart
now dummies can use doomguys rocket launcher!
Bigger and more different for the Dummy13V1 figure frames and armor. Includes Waist13V2.
i Propose balls (42) 1color 16x 2colors 14x 3color 12x or can you try 14x from every color i thing this puzzle will be hard Ball i connect with Glue, opening 3,3/2mm is for positioning meaning probably better print ball full with support…
Printed in PETG on heavily modified ender3v2 using klipper.
Lock nut made with a Dummy 13 stand mount so your Dummy 13 can 'support' your GPU.
This is a 3D reference model of a 128×64 SSD1306 OLED display module, designed to assist with accurate placement and fitting in larger assemblies. The model captures the overall dimensions, mounting holes and pin header position commonly…
case for the SSD1306 OLED display. after inserting the display, heat and press the 4 pins to lock it, or glue it use supports only from the print bed for the screw holes post a make!
Habe die Randstreifen flach gedruckt,die biegung ergibt sich von selbst.wenn im Ein und Ausgang ein Randstreifen verbaut ist,kann man mit Heisluftpistole ein wenig erwärmen das die spannung rausgenommen werden. Material - E-Sun PLA Basis…
