1,465 models
A smaller-scale princess peach costume parts. Print as lightweight as possible to keep from sliding around on the head. I'd recommend 1 perimeter and low infill %. Designed in mind without needing support. All that's needed to complete is…
Need a headband? You're in luck here's one. There's also an f3d file available for an easier remix! Note: Print from the side you can see has a chamfer on it's teeth facing downwards!
found this lil guy on my old drive, no idea where i got him from
Simple headband. Works great in PLA, didn't test any other materials.
unicorn headband for the delight of little girls
Now much stronger and reliable with optional folding! NOTE: if you bought the kit it does not include the parts to make the folding version! Static only! Something to note: If you are not printing your PETG hot enough then the adjustment…
Pony ears and unicorn horn for My Little Pony or Unicorn costume. Slides over a headband to sit securely on your head. Designed to fit these headbands: Girls' 8pk Woven Tinsel Headband - Cat & Jack Printing PLA is fine for these parts.…
Diameter 120 mm, you can scale up to larger sizes.
Made these for a Shrek rave I went to Made with Vanilla White Prusament and painted green Needs supports because the ears are wider than the headband
0,15mm Layer height I've printed mine in PETG
This holder should hold about 6 Mickey/Minnie ear headbands. You print two of each part (the rails and the end caps) and assemble with a drop of superglue. (Or press fit if you want to be able to take them apart for storage.) No supports…
I had the problem with my Astro A50 that the headband cushion always flipt out because of my big head. so I made a clamb for fixing. Tested with Astro A50 Gen. 4 and Mod Kit filament used: black PETG with 50% Inflill (same as full)
This version is for A4 size (Portrait or Landscape). Optimized for stacking, with flat top and total, constant height of 12.9 mm. Therefore it could be utilized only with narrow strap (8 mm), or if the strap is wider, it needs to be soft…
Step into the world of Lilo & Stitch with this original 3D printable headband inspired by everyone’s favorite alien, Stitch! The model is designed for easy printing on standard FDM printers and offers a comfortable fit. The ears are…
I am reuploading this so others can find it on Printables. All pictures on this model are the ones that I personally printed. I have also made a slightly larger version of the headband as the original was too tight for my head. You can…
This is the official design used by e-NABLE Brazil and if you are from e-NABLE Brazil's group please access http://e-nablebrasil.org/wp/cadaimpressaoconta/ to know how to print and assemble this device. This device has been tested and…
Pictured is Overture neon green silk PLA with 0.2mm layer height. Just print all three pieces and glue together. The hollow shell design of the plumbob is lightweight but reinforced in the area that attaches to the clip. Perfect for Sims…
This is a headband for the MINI 13 of Soozafone : Fits perfect and makes your Mini 13 looks very stylish without much filament and time. ____________________ Print settings: Nozzle: 0.4mm Resolution: 0.16mm Support: no Filament: PLA print…
Hello, Today I have a New Year's Headband for you 2026 . A great accessory for a New Year's party. Suitable for group photos. I used ASA/PETG as the material. No need to use supports!!! If you are interested in my work, the links are…
This is a replacement headband for the Razer Kraken X with functional adjustability! I recommend printing with PETG because PLA is too stiff, but you do you. To get the side pieces off the original headband, you need to use a thin metal…
Ring in the New Year with this bold and stylish 2026 headband ! Designed to be lightweight, comfortable, and easy to print, this hair accessory is perfect for New Year’s Eve parties, events, or just showing off your excitement for the…
Reindeer headband. The size was based on a child's headband I used as reference. Scale as needed. The 3mf file includes two headbands, both 90% XY scale. These two fit on a Prusa MK3S bed, barely. They take around 1 hour each when printed…
After printing, carefully heat with a hair dryer and bend to fit.
Use supports and glue the horns onto the headband. 50% infill.
I love my headsets from beyerdynamic but sometimes I am really fed up with the prices of spare parts and how flimsy they are, I regularly change ear pads, cables, headbands and sliders. So I designed those from scratch to be tightened…
The Beats Studio 3 headband commonly breaks where it meets the folding articulation. Mine were not spared. May also work for other Beats Studio, Studio 2 and Studio Pro. This was only tested on the Beats Studio 3, for which it is a…
I was designing the flowers when this competition came up and I thought they would be great for a head band. My wife then suggested a Bow! Hope you enjoy. There are so many great colours in PLA now that the headband would look great on…
For realistic Flight Simulation, a Force Feedback Flightstick is mandatory. Unfortunately, there has been a gap in recent years due to several reasons. For some time now, the VPforce Rhino Flightstick is filling the gap. Due to the long…
This a a Dummy 13 Droidbait!!! that's all i can think of to say.😅
A celebratory headband for children and adults alike! Print at 100% scale for adults or 85% scale for kids. After printing, you will need to trim off the bed adhesion disks at the ends of the headband and check for sharp edges, then you…
After 2 years of use these pieces broke in my headphones. I believe that is a common thing after some time. I created a 3d model to replace the original, and it works great! Probably better printed in PLA for rigidity and in PETG for…
This is the plate for the headband of Naruto (if someone needed to be told). I design it on fusion 360, it's about 10 cm long, 4,5 cm wide and 3mm thick. Print instructions Category: 3D Printing Summary This is the plate for the headband…
These are designed to slip onto a thin metal headband. Printed in PLA at 100% infill with print thin walls enabled.
Remixed from Max666's Heavy Metal Baby Groot as well as 3D Printy's bobble head springs. I thought Groot should headbang as well as throw the horns
Based on different existing models Can be printed without supports Uses 4 DIN 7991 M3-16 Screws and 4 M3 nuts
Update: Don't want to delete the post, but this version has been further reduced in size and improved, so here are links to the newer versions: For the original Shield (240 x 240 mm), here:…
Available now for everyone to download for absolutely free! Fast to print and easy to assemble, strong and portable - an addictive and advanced fidget based on the popular spiral fidgets also available now. These work on a similar bases…
This is a potentially universal solution for headband replacements, I am actively seeking out more headphones to adapt to this design. Right now the HD6x0 series of headphones, the Aurorus Borealis and Australis, and my original designs…
Shelf system for miniatures showing in 8 variations. This shelfs are lightweight option for display miniatures and can be combined together as you need. Valentine headband in doll size (1:6) with shape of three hearts. Printing from PLA,…
CHANGELOG: 4/2/2020: Updated the model to have more support between bands. This makes it a little harder to pull apart, but ensures that the bands adhere well to each other, as I found that some layers would not adhere and cause stringing…
Zoom throw lever for Vortex Diamondback Tactical 6-24x50 FFP Probably works with some other Vortex scopes. I redesigned a bit the zoom throw lever by NJ_v_N. Added 3mm threaded insert, elongated the lever. Print Settings Printer: Printo3D…
A headband with cat ears in a minimalistic look. Works fine when printed in PLA.
Designed a handbag for my daughter's Barbie. I have uploaded the STL and also the STEP file if anyone wants to remix it. Printed in PLA with no supports came out great at .2mm layer height.
This is the official design used by e-NABLE Brazil and if you are from e-NABLE Brazil's group please access http://e-nablebrasil.org/wp/cadaimpressaoconta/ to know how to print and assemble this device. This device has been tested and…
Based on the Headband "Brasil V2", but with A4 format shield. Reduced size/volume of both headband and the lower reinforcement. See pix for comparison. Included two DXF for the A4 sheet as well - Portrait and Landscape. The 3D printed…
An adult sized headband with comb teeth - The teeth should point towards the back of the head. Push headband in your hair starting from the forehead. I modelled this after my old headband with slight modifications. I printed it in silk…
I printed this with PETG and 0.2 layer hight. Changelog: 16.07.2025 Optimised for better printing ----------------------------------- Das Model wurde mit PETG und 0,2mm Layer höhe gedruckt. Changelog: 16.07.2025 Für bessere Druckbarkeit…
It's a festive headband with deer antlers. You could wear it a party. This is a mashup of two great projects: the antler headband by brendonoleary and project headband by calmabalot . Compared to the existing antler headband, this one…
3D print custom accessories for AirPod Max headphones! These ear covers and headbands are LEGO compatible so you can personalize your headphones! Use LEGO DOTS tiles to make mosaic works of art and adorn them on your ears with 3D printed…
The height is 3 mm only, so it will print fast. I recommend using PETG, as it's flexible. PLA might be too brittle. Pro tip: use translucent PETG and choose some fun infill pattern!
If you own a Prusa XL, print any design from the Prusa XL folder If you own a Prusa mini, print the Prusa mini - Headband-v2_band.stl + the 2 parts (left + right), choose your favorite style : lines (for the same style as the photo…
Diamondback Explorer model from Elite: Dangerous Model is split into two parts at the widest point to permit better printing Point the two halves vertically at the seam This work is strictly fanart and not meant for commercial…
Quasi-Universal Top Mount Soundbar Mount Bracket. Modified bracket to have slide-able M4/M5 screw mounting hole. Most soundbars only have mount holes on the bottom for some reason. This does both top and back. Fits up to ~100mm depth…
I printed it with hatchbox transparent green pla and had to dry it out for 8 hours to get the moisture out. You can print it in any of color you want and it does not need to be transparent, as the walls are printed thin enough that it…
The headband, created by NX3CREATIONSLLC, was too small for my head. I am a larger person and needed something bigger. This is a remix that adds 10mm in-between the ear mounts. I have also added some spikes on the lower portion of the…
This is a printable wall mounting bracket for a Samsung soundbar. Instructions for installation: Attach brackets to soundbar using M4 socket head screws. Hold soundbar centered, beneath tv, 1" lower than where you expect to have the…
This is a ninja headband specially designed for the articulated Dummy 13 model. I have created this model in blender.
I made this model last-minute for the Halloween by mashing together 2 other models. You might need to scale this +-10% to fit your head size. Do print the headband before you print the ears to make sure that it fits comfortably. Headband:…
Just needed it for a cosplay, might as well post on here.
- Can't get the Chanel bag? - Print it - No one will know the difference… - Comes with box - Storage for the bag - Have fun unboxing Parts Overview: Bag: - Bag: 7 TPU + 4 PLA parts - String to weave the straps - Used ironing setting on…
***PRINTING TIPS: If using a .4mm nozzle, print 3 walls and make sure walls, infill, and skin patterns are concentric. If any of the layers are not concentric, the band will not be flexible. Check each layer to make sure the slicer didn't…
Print with PLA 0.2mm QUALITY Infill 15% Bed Temperature 70 for without printer enclosure No support needed Printing orientation please check with gcode file
Sized for a 5yo, scale up as needed. Fits on a MINI. Add a 2 color changes to add different colored layer to make the interior of the ears a different color. Updated 3/19/2023 to add print files and 3mf file with material change at two…
This is a Bracket I designed to mount my RCA Soundbar to the wall.
I just released a new tool: A sandbags generator. WIth this, you can create individual shapes of sandbag fortifications for your tabletop models: https://www.patreon.com/posts/sandbags-109307953 These designs aim to fit to the most usual…
This articulated spider is designed to resemble an Australian Redback Spider. It includes options for different leg lengths and an optional colored press-fit "butt stripe" to match the Redback’s iconic look. Each model features an…
2025 headband New years headband, to celebrate the new year Doesn't need supports to print, but if you have poor bed adesion recomend brim Hope you like it
No support needed, stick some nice googly eyes :) tip for prusa mini : remove the skirt, you can print it at 100% (adult size)
This is an easy to assemble headband holder. Overall length 23cm No screws needed. Parts should have a snug fit. If not, try cleaning the slots. This depends on your printer tolerances. You can also use glue to secure them together.
Momentan habe ich gerade einen neuen Ball in Arbeit . Mit neuer Form . Aber ein bisschen Zeit brauche ich noch . Mfg Hannes
Family wanted a headband holder and I couldn't find any decent ones out there and I knew I could do better so I drew this one up. There are 2 parts that need to printed and glued together so no supports needed. I printed this in PETG in…
Single Infinity headband. Design your own attachments and add them to headband. Here are some of mine: https://www.thingiverse.com/thing:3665767 and https://www.thingiverse.com/thing:3663139 and a smoother version may work better. Thanks…
Remix of RC3 3-hole punch 6x stacked face shield. With support ends and without. 3mf file includes supports. 3mf file setup similar to Offical 4x stack from Prusa. There is also a 3mf file for a Creality 3D 10S Pro to print 18x at once!…
Our builder group was unable to source buttonhole elastic for the Prusa Face Shield. We had to fall back to bulk standard flat elastic material. This clip allows a removable and infinitely adjustable elastic band and clip to be fit to any…
That's a great idea! Including specific print settings makes your product much more appealing and easy for makers to download. Here is the revised description, including recommended print profiles and the size you specified. 🎉 Product…
As both of the clamps on my headset were broken, I designed some new. The shape is hard to measure so it's not 100% but good fit. I ran though a lot of iterations to get it like that and ended up with these parameters: PETG(-CF) 0.16…
This is a collection of blank ears to accompany Disney Interchangeable Headband and Ears . Each blank is at different depths and is perfect for painting a custom creation. Disney Headband Blank 1 - No fill Disney Headband Blank 2 - 2.55mm…
Four Leaf Clover headband to celebrate St. Patrick's Day
Dummy 13 headband with cat ears on it! Make sure you print at a small layer height so it actually prints well. Depending on how accurate your printer is, it might need some sanding to fit right, but it should at least sit on the 100%…
I've found this amazing model in https://cults3d.com/en/3d-model/home/louis-vuitton-nano-bag-for-flowers and designed by Grafit. As I've said its an amazing job. I've made some modifications to put some suculet plants on it. Ive…
Update 11/19/2025 - Recent request for the outside slider cover, so I decided to go ahead and add it in. I also did a mild update to the inside slider cover. I think I can do a better job but if this means someone's headphones work vs…
A stylish devil horn headband, perfect for Halloween or themed events. The horns are made of two parts and screw onto the headband using an M16×2 thread , ensuring a secure and easy assembly. The headband has a 120 mm diameter , making it…
Christmass headband deer Print settings 0,2mm layer 5 walls 15% infill no supports
I needed something to hold my Audeze LCD-2 headphones, so I drew up a modified version of a tried and true desk mounted headphone hanger. It supports headphones with 70mm wide headbands (max 80mm). Use the long screw if your desk is less…
Name: Yor Forger née Briar Codename: Thorn Princess Location: Ostania Mission: REDACTED The set of gear for the lethal Thorn Princess. Enemies not included. Stilettov2 x 2 (plus however many you want to toss at enemies) Hiltv2 x 2 (plus…
PETG for durability and that nice sheen. Rainbow/Silk PLA makes a nice horn. Mirror the ear insert in the slicer to make the left and right symmetric. I used a soldering iron to fuse the ear inserts to the headband. Add a bit of…
I quickly drew these up to raise my sound bar above my desk so wires can run under it. Print instructions Print it on its side. No supports and I didn't need a brim on my Mini+ with a smooth steel sheet. I also made it ~50% thick to speed…
Headband in doll size with shape of cat ears. Printing from PLA, without supports, layer height 0.2 mm.
This part provides an encapsulating brace for the pivot hinge for the Sony WH-1000XM5 noise canceling headphones. The brace is tight enough around the bottom part to keep the joint together while remaining loose enough around the pivot to…
Small Sandbag barricade. Category: Props
Original design by RoboMagus. I just made the ears solid with an inset. so you can have different coloured inlays.
I remixed 2 models to 1 for daughter in slicer Supports according to printer, i dont needed. Infill max 10% because if is infill bigger that headband is outweighed.
Drum Key This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/gein53MpBsu Category: 3D Printing
A headband with tentaclesis a must-have for your party. No glue is needed, but it can be useful. You can print the tentacles as I uploaded, it will increase its strength in the narrow part. Just add supports. Or upload my project where…
Made with files from Printables and Thingiverse. Adjustment made to bolts and headband using TinkerCAD. Locking sleeve made in TinkerCAD.
Es gibt auch eine STL Datei OHNE den Namen “Sabine”. Ausserdem habe ich mehrer Zahlen hinzugefügt. my print settings: Rafts - Brim: NO Supports: NO Nozzle: 0.8 Resolution: 0.3 - 0.4 Walls: 2 Infill: 10% Material: Brand: Eono, Giantarm,…
The bat and the spider are printed in flexible filament to ensure they don't break easly, and they are glued to the head band (printed in PETG) with cyanoacrylate. The red color on mouth, eyes and teeth are painted with red nail polish.…
