Counting matching models…
Holder for desoldering pump.Fits on a IKEA Skadis Board. Based on the Fusion 360 peg models from Rkimmell73 https://www.thingiverse.com/thing:3734897 You can find the whole IKEA Skadis pegboard one my blog (article is in German):…
Holds a desoldering pump on the honeycomb storage wall.
A simple and fast print to store your desoldering wick in a Gridfinity bin. Just print it like any normal gridfinity item and have fun :)
Holds a standard desoldering pump on the honeycomb storage wall.
Holds a standart desoldering pump on the IKEA Skadis board.
Solder stand with Tip Holder addition (Vacuum Desoldering Pump) Solder stand with Tip Holder files https://www.thingiverse.com/thing:2947275 Plier addition https://www.thingiverse.com/thing:3114598 Print instructions Category: Electronics
Simple way to hang your soldering iron tips. Feel free to tinker: https://www.tinkercad.com/things/8I6Y6nyvaFM-desoldering-pump-multiboard-mount Print instructions Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution:…
I was looking for a way to mount my different sizes of desoldering wick to my IKEA Skadis pegboard, but did not find a fitting model. I therefore made one by myself. This holder is designed to fit different versions of the small desolder…
Stand for Hakko FR-300m desoldering gun designed to be used with the included heat shield. From thingiverse https://www.thingiverse.com/thing:3407762
After desoldering the switches, print 5 of these, upside down print direction turned 90° so it matches the brushed aluminium. No support, 0.2mm, PETG (update: added 2 test switch cover stl's, since someone asked for it. difference is…
I managed to damage my holder so this is a replacement piece.
Box for gridfinity system for my solder sucker/desoldering pump
I designed this holder for my desoldering pump. Its handle has a diameter of 14.5mm. My peg board is from Topex. The pegs aren't perfect, so I used a drop of hot glue to secure it in place. Happy 3D printing!
A holder designed for large desoldering pumps (mine is 28mm in diameter). You will need an universal hook from CSD_Salzburg collection : https://www.thingiverse.com/thing:2853257
Other designs I saw were going to use quite a lot of filament, when it's such a light item that I thought I could get away with just a base and a top ring. In fact I was going to use this model…
This is Pro'sKit 8PK-366N-G desoldering pump holder for IKEA Skadis. This item is inspired by IKEA SKADIS Collection by CSD_Salzburg, it uses the same hook system (I included the hook). Check out the collection of other IKEA Skadis…
1x2 Gridfinity module for holding desoldering braid reels. Designed with a flat top for a cleaner look since other modules can't be stacked on top of this one. Print details: Printer Bambu Lab A1 0.6mm Nozzle Filament eSun ePLA-Lite ‘Cold…
Storage for Engineer SS-02 desoldering pump along with spare tube. Print with: 2-3 parimeters 2-3 top/bottom layers 0,2mm layer hight 10-15% infill.
This design exists of 2 parts, the holder and a container to collect solder falling out the pump. See also my other designs for more ways to Organize your tools on the Skadis board.
This is a complete redesign (as compred to a modification of original) of this part……
Hose Clamp for Desoldering station ZD-915 Category: 3D Printing
Englisch: I designed a holder for my desoldering pump and solder. The desoldering pump does not hold in the holder alone. Deutsch: Habe eine Halterung für meine Entlötpumpe und dem Lötzinn entworfen. Die Entlötpumpe hält in dem Halter…
This small Clip is part of a modification of a crappy desoldering pump. Here it the video: I printed this in ABS. It should not get to hot for PLA up there, but just in case ;) How I Designed This Category: Electronics
A Multiboard holder for a desolder pump. This holder is taller than others I've seen, but has a Multirail slot on the back and a firmer hold of the body, so I designed this. Designed around a pump with a ~20 mm diameter body and a 7.2 mm…
A Multiboard holder for a desolder pump. This holder is taller than others I've seen, but I wanted a Lite Multirail slot on the back and a firmer hold of the body, so I designed this. Designed around a pump with a ~20 mm diameter body and…
I created this model to simplify de-soldering Kalih hot-swappable sockets for MX-compatible keyboard switches. Idea being to place it under the PCB as if it was a switch, and then let gravity gently push the socket up from the PCB once…
It's not easy to use this hot air desoldering gun with one hand and pliers with other hand. I don't have enough space nor money for dedicated stands. So I build this simple holder as extension for my Proxxon drill stand.
3D Printable ripley solder sucker tips, a normal one identical to the original tip or an inverse tip. Sadly you will still need the original o-ring or one that is similar. The model comes in 2 types: Normal: 95% identical to the original.…
A holder I made for the ikea skadis. It is for a common desoldering pump (20mm ⌀) and attaches to the skadis board using a universal hook.
Two bins that fit inside the Hakko FR-301 Desoldering Tool Case. No covers, but they mostly seal against the lid of the case and they definitely keep your spare parts from bouncing all over the case. Print in your choice of high…
This model holds a desoldering pump in place on the Ikea Skadis board. The mounting method used is with two M3 screws and nuts for easy installation. The M3 nuts are originally too small for the board holes so you'll have to print the…
The loose plunger part with clearing rod broke, so I modeled a new one. Afraid of the new one breaking the same way (and to avoid internal supports) I tilted the model 45 degrees. Print in the orientation pictured (horizontal…
This is a 3D-printed replacement for the Pace Plunger Lock (Part Number: 1500-0063-P1) . It is specifically designed for use with the Pace SX-90 desoldering hand-piece, ensuring a proper fit and restoring the functionality of your tool.…
ZD-915 is a low cost desoldering gun from China. There are a number of sites online that suggest several upgrades/improvements such as this :…
Holder for desoldering vacuum pump ERSA VAC 3 with approx. 22mm diameter. Uses the IKEA Skadis twist-clips from https://www.printables.com/model/256896-skadis-t-clip-system designed by Line Arc Line. - Thanks for that design!
Extension for classic vacuum cleaner to use it like desoldering device. On the other end is just a hole, where you should instal a mount-piece from a desoldering spring gun. Its not the best model, but probably someone will download just…
clips for holding the desoldering pump tube and electric wire together
Holder for all your different nozzles of a desoldering station. #update: Made the text a bit bigger and the holes a bit bigger for a nicer fit and better view of the text.
Simple 1x2 Gridfinity Bin for soldering stuff the diameter is for the Pump is 21mm and the desoldering Braid can be up to 50mm wide Einfacher 1x2 Gridfinity Bin für Löt Zubehör der durchmesser der pumpe beträgt 21mm und die entlötlize…
This is a holder for a desoldering bulb - I think mine is from Radioshack. It works with Gridfinity - it is a 1x1x3 block. To see if your bulb will fit, the dimensions are: Bottom radius 21mm (bulb is about 20mm) Hole is 16mm deep, and…
There are no assembly instructions yet. Here is what you need: Yellow Boi(hard to find now) Food saver or other vacuum pump that takes 6mm OD tubing {{3d Printed parts}} 6MM ID O-ring (1.5mm) (this is a #5 in freedom units) 9MM ID O-ring…
hi, i designed this desoldering pump container for my gridfinity setup.
Weller DSX 80 Desoldering Iron and other Tube and cable Clip
Better Version: https://www.printables.com/model/1016754-better-desoldering-pump-stand-with-solder-waste-bi The top part is designed for the ATTEN AT-E330A desoldering pump.
Things needed: some wire, cottonwool, 5mm flexiple plastic hose and superglue. Use superglue to attach handle assembly to soldering iron. Cottonwool is used as filter in end cap. (see picture) Screws: M3x8 4pcs. M3x12 4pcs. M3 nuts 8pcs.…
Organizer for automatic desoldering tool (https://www.aliexpress.com/i/1005003687849262.html) to wall - to be glued
I modified a insert of the pinecil rugged case to fit desoldering wick.
The top part is designed for the ATTEN AT-E330A desoldering pump.
I took the Soldering holder by PaŠe and added Skadis hooks to it, print with supports for the hooks.
This is a 1x5 Gridfinity nest for a bigger-than-average desoldering pump (IYKYK)... It's usually blue and yellow. The plunger hangs off the edge of the tray, which allows this tray to be printed on most printers. Otherwise, the tray would…
If you own the SS-331, the first thing you will do is move the powerswitch from the back to the front! This leaves an ugly and dangerous hole in the backcover. With this simple part, you can close the hole. It is a press fit so should be…
This ring replaces a broken spring retainer inside a Pro's Kit DP-366D desoldering pump. Probably fits clones too of this model too. They are quite ubiquitous. Print slowly and hot for best results. PETG is useful, but not required.
After emptying the filter pipe assembly a few times, the cardboard edges are usually a bit weaker and don't make a good seal with the front and back holder bushings. This spacer goes behind the spring-loaded back holder to apply a bit…
This is a replacement for the infamous and fragile button on the desoldering pump for electronics. Add a 20mm M3 screw to make this button permanently fixed.
Holder of 11 tips for the Solomon SL-916D soldering and desoldering station. I printed it from PETG with standard settings. No supports needed. Soldering tip hole diameter: 6mm Desoldering tip hole diameter: 7.5mm Object size: 120 x 40 x…
Made a 4x1 Desolder Pump holder with a holder for rosin flux and desolder wick Made the step and fusion file available if u want to change the diameters and such in the timeline Print like any other gridfinity file i made it in 0.3mm as i…
Recently I have picked up a cheap desoldering iron and to make it a little more ergonomic I made a handle/pistol grip for it. Category: Tools
The idea for this came as an "add-on" to my revised magnetic solder spool holder . The cup holds a manual pump vacumm desoldering tool at a convenient 45 deg angle. The base has pockets for 10x2mm magnets. It attaches nicely to a swing…
This is a simple stand for an Ersa VAC X desolder tool. It fits on a 1x1 Gridfinity baseplate. FreeCAD file provided for those playing along at home.
Created by subtracting the pump's outline from a solid GF block
These clips are designed to be used with the Toolcraft ZD-8925 Desoldering gun, to keep the cable and vacuum hose together. They will probably work for other brands too, if they use the same cable/hose sizes. The cable of the Toolcraft…
I have just bought a de-soldering tool and like a lot of things now, it comes with little spares like nozzles, filters and cleaning rods. These usually get put somewhere for safe keeping and I never remember where I put them so I thought…
Holds 100g solder spool ( ø ⁓70mm | ⇿ ⁓25mm); Flux ( ø ⁓19mm); Tweezers (ESD-13); Desolder/Smaller spool (3×) Side Holders needs to be glued, they won't hold by themself. There are few overhangs for side holders, but their dimensions are…
desoldering pump holder , another screwanle remix version of a great model, if you prefer a (wooden) wall.
Print with PETG for sturdyness and temperature resilience.
This is a functional wall mount designed to keep your manual desoldering pump organized and within reach. It features a bottom support to hold the weight and a "C-clip" style upper bracket to snap the tool securely into place. The design…
A quickly made holder for a desoldering pump for the IKEA Skådis system. Print instructions: Prints with the tip end down, and then with organic supports at the pegs. PETG 0.2 mm layer height 3 perimeters 10% infill
This was my first model designed in OpenSCAD. It’s very simple, but it does the job nicely! The project includes three parts: Spool holder Spool shaft Desoldering pump holder The model is fully parametric , so you can easily adapt the…
This is a stand for the Hakko 808 desoldering gun. The base and support are separate in case you want to disassemble for storage or they can be glued together.
The grindfinity holder for the ProSkit desoldering pump fits perfectly and can be easily removed. There is a cutout on the back for easy removal.
A simple holder for the tips for my Jbc De soldering tool as i couldn't find one anywhere i can also upload the fusion 360 file should anyone need it i printed mine in petg but it should work in any material
Parametric design for desoldering iron tips to easily and safely (For the chip and PCB) desolder DIP packaged chips Designed to fit these tips: https://cnckitchen.store/collections/soldering-tips-and-sets However you can tweak the…
Snaps into side panel. Holster fits for ~19mm body syringes Works with all of my flux syringes and desoldering pumps Please ignore my broken camera sensor
Printed in PLA with a layer height of 0.20 mm—it worked perfectly. Designed from scratch. Any recommendations are welcome.
Designed to fit the chinesium knock off desoldering pump / solder sucker that pretends to be an Engineer brand SS-03. Stored standing up to save space. Includes small spaces to store spare silicone tube, if so desired. Also space for…
Holder for Desoldering pump / solder sucker that mounts to the skirt of my workbench.
This is a functional wall mount designed to keep your manual desoldering pump organized and within reach. It features a bottom support to hold the weight and a "C-clip" style upper bracket to snap the tool securely into place. The design…
A quickly made holder for a desoldering pump for the IKEA Skådis system. Print instructions: Prints with the tip end down, and then with organic supports at the pegs. PETG 0.2 mm layer height 3 perimeters 10% infill
The grindfinity holder for the ProSkit desoldering pump fits perfectly and can be easily removed. There is a cutout on the back for easy removal.
A simple holder for the tips for my Jbc De soldering tool as i couldn't find one anywhere i can also upload the fusion 360 file should anyone need it i printed mine in petg but it should work in any material
Weller DSX 80 Desoldering Iron and other Tube and cable Clip
